File to be put in two queues

Hi all,
I have a scenario like this.
R/3 (idoc)->XI->MQ(two queue name)->External application
Here in the receiver side, I have to give two queue names.
Because the external application has to receive message from two different queues.
The question is
can i give two queue names for the same receiver service?
Can anyone throw some light on this scenario?
Thanks,
Deno

Deno,
I beleive Robin's answer is explanatory. However, i will try to explain what i understand.
You have to configure 2 instances of JMS adapter, one for each queue.
Now, create two receiver agreements referring to these 2 adapters(If you are sending the same message without any transformation to both queues, you can create two inbound async interfaces with different name, but still referring to the same MessageType). This is because you will not be able to create two receiver determinations with the same receiver interface name.
Now create an interface determination, and refer to both receiver interfaces craeted above here, recv i/f1 & recv i/f 2. Associate this i/f determination with your receiver determination and it should work.
cheers
Saravana

Similar Messages

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

I donot want to put reports in queue

Dear All,
We have application server 9i version 1.0.2.0.0 (isuite).
We don't have any application server administrator (most of us are devlopers).
On time of running report application server puts all report in queue and executes it one by one.
I don't want to put in the queue these reports. Whenever user generate report application server should respond immediately instead of waiting in queue.
I have searched this in the forum i also got the solution which says
"Increase the maxEngine setting in your report conf file"
My question is where can i find this file and the variable inside that and to how much should i increase this value.
Kindly advice.
Thanking You in anticipation.
Regards,
Devendra

INITENGINE.
INITENGINE is the initial number of runtime engines started by Oracle Reports Services. The server process spawns this many engines when it is started. It waits two minutes for these engines to connect to it and shuts itself down if they fail to do so. If the engines cannot connect in this amount of time, then there is usually some setup problem. The default value is 1.
MINENGINE.
MINENGINE is the minimum number of runtime engines Oracle Reports Services should have available to run reports. The server process attempts to keep at least this many engines active. Ensure that you have sufficient memory and resources available to accommodate this many engines. The default value is 0.
Note: You can set this parameter from the Queue Manager. Open the Queue Manager and log on as the administrator. Choose Queue->Properties, and then change the change the Simultaneous running engines Min setting.
MAXENGINE.
MAXENGINE is the maximum number of runtime engines available to Oracle Reports Services to run reports. The server process attempts to keep no more than this many engines active. Ensure you have sufficient memory and resources available to accommodate this number of engines. The default value is 1.
Note: You can set this parameter from the Queue Manager. Open the Queue Manager and log on as the administrator. Choose Queue->Properties, and then change the Simultaneous running engines Max setting.
ENGLIFE.
ENGLIFE is the maximum number of reports that an engine runs before shutting itself down. Oracle Reports Services then brings up fresh engines for new requests. The default value is 50.
MAXCONNECT.
MAXCONNECT is the maximum number of processes that can communicate with the server process at any one time. This setting is the sum of the number of engines and clients, and must be greater than two (at least one engine and one client). The default value is 20.
ENGINERESPONSETIMEOUT.
ENGINERESPONSETIMEOUT was introduced to timeout long running or hung reports that will cause the entire report server to hang. This attribute enables Reports Server to detect the hanging engine and perform cleanup. The sooner Reports Server detects the hang, the better the stability of the system. Thus, engineResponseTimeOut must be set carefully.
MAXIDLE.
MAXIDLE is the maximum amount of time an engine is allowed to be idle before being shut down. Oracle Reports Services does not shut down the engine if doing so would reduce the number of available engines to less than those defined in the MINENGINE. T default value is 30.
Note: You can set this parameter from the Queue Manager. Open the Queue Manager and log on as the administrator. Choose Queue->Properties, and then change the Max idle time (minutes) before engine shutdown setting.
CACHEDIR.
CACHEDIR is the cache for Oracle Reports Services. CACHEDIR can be set to any directory or logical drive on the machine. If it is not specified, then the default is ORACLE_HOME\REPORTS\SERVER\CACHE. For example:
CACHEDIR="C:\ORACLE_HOME\Reports\cache"
CACHESIZE.
CACHESIZE is the size of the cache in megabytes. If you expect to store the output of many of your reports in Oracle Reports Services cache, then you might want to increase this setting. If you do not expect to store a lot of output in the cache and have limited system resources, then you might want to reduce it. Once the cache grows beyond the set size, Oracle Reports Services cleans up the cached files on a first in, first out basis. The default value is 50.
Note: You can set this parameter from the Queue Manager. Open the Queue Manager and log on as the administrator. Choose Queue->Properties, and then change the Cache size (MB) setting.

TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

See Pondini's Transferring files from one User Account to another, for starters

I purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.

i purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.

In iTunes, try signing out of your Apple ID & then back in: click on iTunes Store on the left sidebar of iTunes, click on your Apple ID on the top right, sign out, sign back in. Then try to sync your purchased music to your phone again.

Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I inste

Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I instead just keep everything on my ipod and then if I have to get a new computer or something just download all my songs from the ipod to my new computer's itunes? Will that work? Will I still be able to keep all my songs that way?

I'm going to assume the consolidating files does not work due to hard drive space limitations.
Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility? That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
Also, using the Apple article on moving the library, take a slight twist on what it says. Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation.

I have created 2 websites one is in english and the other in russian how can i link these 2 so that on each page you can choose to read the page in russian or english??? like how do i put the two language flag toggles?

like how do i put the two language flag toggles such that you can choose to read the site in russian or english?

On each of the English pages add a Russian flag and link that flag to the Russian equivalent page with the Inspector/Link/Hyperlind pane.
On each of the Russian pages add a US or British flag and link that flag to the equivalent English page.
OT

I have some stuff i want to put on external hard drive when i drag the file or files it just puts them back

i have some stuff i want to put on external hard drive when i drag the file or files it just puts them back

Did you format the external disk on Windows? If you did this, probably the external disk is formatted in NTFS. OS X can't write on this format, so it's normal that it doesn't allow you to copy the files.
In this case, you have three possibilities:
1. Install Paragon NTFS. This program allows you to write on NTFS partitions.
2. Copy the hard drive content to your internal disk and format the external disk with Mac OS Extended (Journaled). Do it only if you are going to use the external disk only with OS X.
3. The same as the last one but formatting it with exFAT. This filesystem is compatible with Windows (XP, Vista, 7, 8) and OS X (10.6.5 and newer), so you can write and read files on external disks formatted with it on Windows and OS X, but you may have problems on Linux

Need help putting together two scenes in one frame

Hi Guys,
I'm trying to put together a movie project. The thing is I wanted to put together two video captures in one frame - one on the left and the other on the right. I've been reading threads here in the forums and there have been varying answers (sometimes misunderstanding the question) so I would give examples.
Here's an example: Do you know those movies where the guy and the girl sing a duet but they are in different locations and to give a cinematic effect, the movie will put their faces side by side singing the same lines?
Another example is when the good and the bad guys are about to face each other from different directions, the scene would be split such that the left side shows the good guys and the right side shows the bad guys.
Is there a way in iMovie to do this?
Thanks guys!

take a look at this: http://www.youtube.com/watch?v=B5rSr7Z7Vck&feature=channel

Reading message from two queues and sort according the time stamp

Hi
I have a requirement where i have to read the message from two queue .. and sort according the Time stamp ( Field in payload ) and send it ot the Webservice ..
How i acheive using the BPM..
in the BPM i have to collect the message for every 20 sec ... and then sort it tout ...
S V

Do you mean from two sender? What do you exactly mean by "reading from two queues"?
Regards,
Prateek

After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. How do I uninstall and reinstall the software? Adobe's instructions are only for Window devices.

After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. I suspect corrupt software. How do I uninstall and reinstall the software? Adobe's on-line instructions are only for Window devices.

You can just drag the file to the trash. If you want you can remove the pdf plug-in from the internet-plug in folder, but that should not be necessary to correct your problem.

HT5826 I have PDF files that I put on my Mac iBook application, how do I sync them with other devices?

Hi all,
I have PDF files that I put on my Mac iBook application, how do I sync them with other devices?

Hello there, Dhamin.
The following Knowledge Base article has some great information on this very topic:
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch
http://support.apple.com/kb/HT4227
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

How to transfer files(pdfs/music.etc)between two pcs

how to transfer files(pdfs/music.etc)between two pcs?

Yes, you pretty much just drag and drop or copy and paste depending on which way you like better. It is pretty much like connecting an external hard drive. Just find the files you want and copy them over to your other computer.
This is one of my favorite features from Macs. It's very simple to do and because it's Firewire even large files transfer over very quickly.

I have an 21.5 Mid 2011 iMac and i want to upgrade my RAM. Currently I have two 2GB and two free slots. Do I have to put in two 2GB in the free slots or can I use two 4GB or 8GB?

I have an 21.5 Mid 2011 iMac and I want to upgrade my RAM. Currently I have two 2GB and two free slots. Do I have to put in two 2GB in the free slots or can I use two 4GB or 8GB?

You can leave the existing RAM in their current slots and add compatible modules in the empty slots. For best performance, add two of teh same size. Our 2010 iMac 21" shipped with 4GB RAM---two 2GB modules in two of the four slots. I added two 2GB modules to the empty slots and now have 8 GB RAM.
Be sure to order RAM from a trusted Mac-savvy RAM vendor. Some vendors thing a Mac is a hamburger. For over a decade I've bought all our Mac RAM (and we have 18 Macs in teh family!) from one vendor:
http://eshop.macsales.com/shop/memory/iMac/2011/DDR3_21.5_27
The link is to the proper RAM for your Mac.
Crucial.com is also a trusted vendor.

Now that File Sharing is available. Two questions about feature.

Now that File Sharing is available. Two questions abou the new feature.
Question 1 - If you have an individual subscription, can you share your files with someone else who has Creative Cloud subscription such as design agency?
Question 2 - If you have a Team subscription can each member choose which files they sync so they don't sync everything all the time but still have access to the entire team files?

No to both, unfortunately.

File to be put in two queues

Similar Messages

Maybe you are looking for