File to File without IR

Had a doubt, if we have to do file to file without IR using the blog mentioned in wiki. if its a csv file do we need to do content conversion also in the sending channel?

>
seeburgerlearner wrote:
> Had a doubt, if we have to do file to file without IR using the blog mentioned in wiki. if its a csv file do we need to do content conversion also in the sending channel?
No.....you dont even need to worry what data is there in the file....or what format it has....just file name and extension should match...
Regards,
Abhishek.

Similar Messages

File-RFC-File (without BPM)- Issue

Hi All,
I am working on a File-RFC-File (without BPM) scenario in PI 7.1.
My scenario is having few problems like, its not able to delete the file from the source directory path (for which we have delete permissions) and it is an NFS system and it shows an error in the Sender file CC.
"Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId"
But it gets processed successfully and provides a written paramter which I could see in MONI, but again doesn't write the file in the target directory. Could you please provide your inputs and let me know if I need to do any additional settings w.r.to PI7.1.
These are the parameters which I have specified in the Sender File adapter
Processing sequence
AF_Modules/RequestResponseBean     Local Enterprise Bean     1
CallSapAdapter     Local Enterprise Bean     2
AF_Modules/ResponseOnewayBean Local Enterprise Bean     3
Module configuration:
1     PassThrough     true
3     receiverChannel     <FilereceiverCCname>
3     receiverService     <Receiver Bus System>
Regards,
Nithiyanandam

Hello,
Check out in module configuration tab for any "type error" or spell mistakes.
Check out this thread which might be useful for you :[ File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.]
regards
Ramesh

Anyone know of an app that will merge multiple folders with files inside them without duplicates or losing any files???

I have two large iTunes folders that have thousands of folders within them and thousands of .mp3 files within those folders.
I need to merge them without duplicating or replacing files.
Suggestions?
Prelude/backstory:
I just got back one HD (HD1) from a recovery place that recovered close to 45,000 mp3s in addition to the thousands of mp3s that were already there.
My second HD (HD2) has the same mp3 files that did not need to be recovered, but also has additional mp3s that I added in the time HD1 was away at recovery.
I want to end up with one iTunes folder that has all the files in it, without duplicating them and without losing any.
Thanks in advance!
*I'm running OSX Lion on a brand new MacBook Pro

You can see if there is anything useful in this thread:
https://discussions.apple.com/thread/3196617?start=0&tstart=0
Other possiblities:
http://www.addictivetips.com/mac-os/macmerger-merge-files-content-of-any-two-fol ders-into-one-mac/
MacMerger

Dear ladies and gentlemen! I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Ad

Dear ladies and gentlemen!
I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Adobe Acrobat 9 Pro has released version 9.0.0. Two updates this version is not listed. Please inform me how I can fix this problem.
Sincerely, Walter Hacksteiner
mailto: [email protected]

The first thing I would try is to update Acrobat 9 to the latest version 9.5.5
The next thing would be to run Acrobat 9 in Windows 7 or Vista or XP Compatibility Mode.

I want to start a new movie but iMovie is hung looking for an old file and says:"Without this file, the movie cannot play properly."

Hello!
I recently upgraded to Lion. Every time I start up iMovie, it asks if I want to go ahead and generate thumbnails. I say OK, then it alerts me that it cannot file the file IMG_0073.MOV. Then it says "Without this file, the movie cannot play properly." It gives me the option to either cancel or search for the movie.
I don't have the old file it's looking for. I simply want to start a fresh movie with new material but cannot get past this hump. Based on the little research I have done, some people experienced this problem because the files were in aperture at some point, which was the case for me before when I used iMovie. I have since moved forward only with iPhoto but perhaps it's hung on an old file format?
I tried taking another old movie and renamed it IMG_0073.mov to see if I could simply select it, give it what it wants and move on but it won't let me select the file for some reason. I also tried removing iMovie and downloading a fresh version but that didn't work either. My BF tried removing pfiles (I think that's what it's called? but again no luck)
Please help! I must get this assignment done for a class!

Hello!
I recently upgraded to Lion. Every time I start up iMovie, it asks if I want to go ahead and generate thumbnails. I say OK, then it alerts me that it cannot file the file IMG_0073.MOV. Then it says "Without this file, the movie cannot play properly." It gives me the option to either cancel or search for the movie.
I don't have the old file it's looking for. I simply want to start a fresh movie with new material but cannot get past this hump. Based on the little research I have done, some people experienced this problem because the files were in aperture at some point, which was the case for me before when I used iMovie. I have since moved forward only with iPhoto but perhaps it's hung on an old file format?
I tried taking another old movie and renamed it IMG_0073.mov to see if I could simply select it, give it what it wants and move on but it won't let me select the file for some reason. I also tried removing iMovie and downloading a fresh version but that didn't work either. My BF tried removing pfiles (I think that's what it's called? but again no luck)
Please help! I must get this assignment done for a class!

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
Someone, Please help

Hi Allen,
Is there any way to store the back up to Mac and restore after formating?

I have a question about extracting pages. When I do the function, adobe saves the individual files as " file name space page number ", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I a

I have a question about extracting pages. When I do the function, adobe saves the individual files as "<file name><space><page number>", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I am using excel to concatenate some data to dynamically build a hyperlink to these extraced files. It casues me problems, however, for the space to be the the file name. Is there any way to change the default behavoir of this function to perhaps use a dash or underscore instead of a space?

No, you can't change the default naming scheme. You can do it yourself if you extract the pages using a script instead of using the built-in command.

Send attachment via Receiver FILE/JMS adapter without using any Mapping.

Hi,
R/3 program creates one (encoded) text file, which I want to send via Proxy to JMS adapter without any mapping or FCC.
Note: I don't want to use File adapter to pick the file from R3 dir and then send it to JMS.
Reference: I have gone through below mentioned blog which produces the attachment in the XI payload but I am not able to write the same attachment to my XI dir using Receiver File adapter (File adapter is just for testing actual adapter will be used as Receiver JMS adapter).
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
Regards,
Sarvesh

> note sure why you want to complicate things here
Actually the idea was to explore the possibilities of "Proxy with attachment". And I also wanted to confirm with experts like you before going to other options. Anyway it seems it's only possible with mail adapter.
Reason for exploring above possibility: Since ABAP team has to create one text file and encode it, so we thought to call the outbound proxy in the ABAP program to send the same file as an attachment and then simply send it to JMS. Which is quite obvious thinking when you don't want to manage a share directory between R3 & XI or don't want to manage FTP user and pwd.
> i think the simplest thing is to go for a simple file to jms configuration unless you have any specific reasons for not doing so.
This we already kept in our mind as a last option in case if above thing is not possible then we can easily do it by this way.
Thanks a lot for suggestion.
Regards,
Sarvesh

File to File multiple scenario without mapping

Hi
I am doing one simple file to file scenario without mapping i.e picking file from sender directory and then placing it in receiver directory via FTP.
Now i have to take two files from different directories and place them in to different directories in the receiver side.
On the sender side i have selected Advanced selection for source file and maintained the sceond directory name and filename.
now i am not aware about the reciver side that how to place the two files in to different directories.
I have to make only one interface for this.
Thanks in advance.

u have to follow the code in the link provided above but with some manipulations...
in case u r placing the files in different target dir depending upon the source directory then ur code will be something like this:
Note: i dont have a system as of now..so cant able to check the code for syntax errors..please cross check it
MessagePropertyKey mpk = new MessagePropertyKey("Directory","http://sap.com/xi/XI/System/File");
String SourceDir = msg.getMessageProperty(mpk);
if(SourceDir.equals("/SourceDirectory1"))
String targetDir1 = "/TargetDirectory1"
msg.setMessageProperty("http://sap.com/xi/XI/System/File","Directory",targetDir1);
else if(SourceDir.equals("/SourceDirectory2"))
String targetDir1 = "/TargetDirectory2"
msg.setMessageProperty("http://sap.com/xi/XI/System/File","Directory",targetDir2);
else
http://help.sap.com/javadocs/pi/SP3/xpi/com/sap/engine/interfaces/messaging/api/Message.html#getMessageProperty(com.sap.engine.interfaces.messaging.api.MessagePropertyKey)
lIbraries for adapter module development:
http://wiki.sdn.sap.com/wiki/display/XI/Where%20to%20get%20the%20libraries%20for%20XI%20development
How to develop adapter module:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?QuickLink=index&overridelayout=true

File - RFC - File without BPM --- Object not found in ResponseOneWayBean

I am using PI 7.1, and facing the following error in File - RFC - File without BPM
"Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean."
I am using 1 sender CC for File ( CC_LOTUSNOTES_CHALET_SND)
                  1 receiver CC for File( CC_LOTUSNOTES_CHALET_RCV_FILE)
                 1 receiver CC for RFC (CC_LOTUSNOTES_CHALET_RCV_RFC)
in the sender CC I have given Module parameter as:
Processing sequene
CallSapAdapter    Local Enterprise Bean 2
AF_Modules/ResponseOneWayBean Local Enterprise Bean 3
AF_Modules/RequestResponseBean Local Enterprise Bean 1
Module configuration:
1     passThrough          true
3    receiverChannel      CC_LOTUSNOTES_CHALET_RCV_FILE
3    receiverService       Bus_File
pls let me know where i am wrong

Hi
i am facing following error:
2009-12-03 09:08:17       Information        The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2009-12-03 09:08:17       Information       MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2009-12-03 09:08:17      Error                 MP: exception caught with cause java.lang.NullPointerException
2009-12-03 09:08:17      Error                 File processing failed with java.lang.NullPointerException

File is not getting deleted in File-RFC-File without BPM

Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

Hi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini

How to send image file through mail without any attachment

Plz tell me how to send image file through mail without any attachment ( i mean not converting that image into pdf or any format ) i want to send that text or image through mail .

Hi Sandeep,
I think you can setup the type of email in Shared office Settings in transaction S016.
There is an option called <Preset document classes>
You choose this pushbutton to branch to the maintenance screen for the document classes that are directly displayed to users in the Business Workplace for selection when they use the Create function. The name under which the documents are displayed can also be maintained.
http://help.sap.com/saphelp_nw70/helpdata/en/6c/69c30f418d11d1896e0000e8322d00/content.htm
Haven't tried it though.
Regards,
Siddhesh

How to Read a file using File Adapter without polling

In My process I want to be able to read a specific file.
But without polling for files?
Can I use the File Adapter for this?
Thanks
JO

Yes you can.
Read about Synchronous File Reading Capability here download.oracle.com/otndocs/products/bpel/bpeltechadp.pdf
Also read this: Re: Help! Three questions about FileAdapater.

File to file mapping without xml

Hello,
is there a possible way to use a PI7.1 file to file mapping (one static-positioned field must be mapped) without storing the file in xml format ?
We are having a flatfile and have to send this flatfile through our jms receiver adapter(as flatfile structure) but there is one important field which has to be mapped/changed(static value for all files).
Our SAP Applikation (File sender) would avoid to change this during or after creating the flatfiles in the R/3 System.
Thanks,
Gordon

Hi Gordon,
>- Do you have an example for that abap mapping ?
DATA g_str TYPE string.
CALL FUNCTION 'ECATT_CONV_XSTRING_TO_STRING'
    EXPORTING
      im_xstring = source
      im_encoding = 'UTF-8'
    IMPORTING
      ex_string   = g_str.
REPLACE 'ABC' WITH 'XYZ' INTO g_str.
CALL FUNCTION 'ECATT_CONV_STRING_TO_XSTRING'
    EXPORTING
      im_string   = g_str
      im_encoding = 'UTF-8'
    IMPORTING
      ex_xstring = result.
>I think i have to use some entry parameters for my interface right ?
?? no..
>- Is it possible to use that within the integrated configuration ?
?? yes..
Regards,
Udo

Renaming a File to File without Mapping

Hi All,
I am having a scenario where there is a text file transfer without any conversion i.e. basically a file to file scenario with no mapping. The only requirement is to rename source file which has .csv extn to .dat. For instance if the sender file is XYZ.csv, the file at the receiver side should be XYZ.dat.
As there is no mapping, I cannot use Dynamic Configuration UDF in mapping. One other option is to write an adapter module which seems too bulky for this small requirement. So as of now I am looking at any option which I can use without having to create IR objects or do text ->XML -> text conversion.
I hope experts here can help in resolving the current problem and/or give some pointers
Best Regards,
Pratik

> OS Command in File Receiver Channel: mv %f `basename %f .csv`.dat
I think you should use the full path address, the same as you used for the folder.
You can also use an adapter module, it is just a couple of lines:
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData)
                      throws ModuleException{
     try {
        Message msg = (Message) inputModuleData.getPrincipalData();
        Payload payload = msg.getDocument();
        String fileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File","FileName");
        // do something with the filename
        msg.setMessageProperty("http://sap.com/xi/XI/System/File","FileName", fileName);
        inputModuleData.setPrincipalData(msg);
    } catch (Exception e) {
        throw new ModuleException(e);
    return inputModuleData;

Error in File-RFC-File Without BPM

Hi,
We are following this wiki
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)]
and we are getting Error: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Internal Server Error in sender communication channel monitoring. File is not picking. I think problem with the parameters that we have mentioned in module tab in sender communication channel as specified in the wiki. If we remove additional 2 parameters it is picking the file.
Please help me to resolve this issue.
Thanks.
Jyothi Anagani.

are you able to see the logs of file adapter?
go to messaging system and check the details
http://host:port/MessagingSystem/monitor/monitor.jsp
Rajesh

File to File without IR

Similar Messages

Maybe you are looking for