File to Multiple RFC's to File scenario ....

Hello Friends,
We are implementing a scenario : File-RFC-File without BPM, but our output data is available with 3 BAPI's, If we are going to implement 3 File-RFC-File scenario's so we would be getting 3 output files. How can this be combined in a single file.... As we need to generate a single file.
Pl. can anyone help me with this ......?
Regards,
Jayashri.

Easiest way would be the use of BPM. Without BPM, you can create and append same file but that could not ensure the correctness of data, so not a good solution.
Other way could be using one scenario with two RFC lookups.
Regards,
Prateek

Similar Messages

  • Save file in multiple directories using receiver file adapter?

    Hi,
    Is it posible to save file in multiple directories using receiver file adapter?
    Regards,
    Ashish

    Well, there is a round about way to do that -
    The idea is to use multi mapping. 1:n mapping
    1) Map ur message to 2 different record set nodes. Since you want to use the same file both the mapping will look exactly the same. make sure that the filepath and filename are a part of the output payload message
    2) In the file adapter config. make sure the the file name and file path are from these payload fields. You can use a context object to refer these fields. Voila...the files are created in the 2 direcoties you mentioned.
    of course the simplest way is to route the same message to 2 business systems/services and write them out using 2 ccs.,
    Arvind R

  • How to pick files from multiple directories via Sender File Adapter?

    Hi guys,
    I have a scenario File to IDOC. The Sender File Adapter has to take all files: .xml from Source directory E://Current/.
    Actually directories are like
    E:/Plant1/Current/
    E:/Plant1/History/
    E:/Plant2/Current/
    E:/Plant2/History/.
    Can I have one Sender File Adapter to pick all *.xml files
    from
    E:/Plant1/Current/ and
    E:/Plant2/Current/  and how can I write it in Source Directory of Communication Channel?
    Or do I have to have a Sender File Adapter for each Plant?
    Any suggestion please?
    Kind regards,
    Danijela Zivanovic

    Hey
    You might wanna have a look at "Additional selection for source file" parameter in sender file adapter.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/singleSenderFileCC4MultipleDirectories
    XI/PI: how to exclude files in a sender File adapter?
    Even though this method works but there are some constraints,please check help.sap.com for constraints.
    Thanx
    Aamir

  • How to write file into multiple directories by using file adapter?

    i need to write my file into multiple directories,i able to do in single directory.But i need to write to muliple directories.Please help me out.Thanks in advance.

    If you are passing the values at runtime then you can loop it and and invoke the file adapter in loop by dynamically passing the value in invoke properties for "File Directory and File name" etc.

  • File to Multiple RFCs

    Hi,
    The source file is having addressing data and functional location data I need to call two BAPIs one is for addressing data and another one is for functional location data to create those in R/3. Input file comes with multiple records. How can we design for this reqirement? Is RFC handle multile records?

    Hi kartikeya,
    1) You can do it by using N:1 message mapping and BPM.
    2) In BPM you can call and store the messages. 
    3) After that use transformation in bpm and do N:1 mapping
    refer following links
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    Regards,
    Rohit
    Reward points if helpful.

  • Need Script to split multi-paged ID file into multiple single paged ID files

    I have created a 366 page document (and have 2 more to create). None of the text threads from page to page, and there are no master page items. Each page is destined to be used as a single block that will be copied and pasted into a master document by a database driven plugin (and for color editing reasons it needs to be separate .indd files). For expediency, I created these as a single document because I could import the text with ID style tags to pre-format the text (with all text blocks threaded). I then broke all the text threads using API's Auto Unstich plugin. We then manually tweaked the text of each page.
    Gluon once sold a plugin called DocSplitter, but it has not been updated since CS1 and does not work with CS4.
    Before you ask why I don't have the database plugin create multiple single page docs — the plugin doesn't currently save to individual ID docs (yet - feature to be released in 3 months).
    I know that scripting could possibly do what I need, but I have little to no experience with AppleScript (7 years ago) and none with Javascript. Would love to find a pre-packaged solution and am willing to pay someone for it.
    To guess there are two ways a script could work:
    1) script breaks the doc into single pages (not sure how that would work really) but the files would be named based on page number — i.e filename-01.indd, filename-02.indd, etc.
    2) script selects all objects on a page, groups the objects, copies the objects, creates a new page, pastes the objects and then saves the file in the same manner as number 1 above - loop and repeat for al the pages.
    Any help would be greatly appreciated.
    many thanks
    Roger

    Hi Roger,
    This topic was discussed in this thread: http://forums.adobe.com/message/1113562#1113562
    Check out this script:
    http://creative.mediabox.fr/index.php?app=core&module=attach&section=attach&attach_id=6440
    Kasyan

  • Need to split multi-page ID file into multiple-single paged ID files

    I have created a 366 page document (and have 2 more to create). None of the text threads from page to page, and there are no master page items. Each page is destined to be used as a single block that will be copied and pasted into a master document by a database driven plugin (and for color editing reasons it needs to be separate .indd files). For expediency, I created these as a single document because I could import the text with ID style tags to pre-format the text (with all text blocks threaded). I then broke all the text threads using API's Auto Unstich plugin. We then manually tweaked the text of each page.
    Gluon once sold a plugin called DocSplitter, but it has not been updated since CS1 and does not work with CS4.
    Before you ask why I don't have the database plugin create multiple single page docs — the plugin doesn't currently save to individual ID docs (yet - feature to be released in 3 months).
    I know that scripting could possibly do what I need, but I have little to no experience with AppleScript (7 years ago) and none with Javascript. Would love to find a pre-packaged solution and am willing to pay someone for it.
    many thanks
    Roger

    The link I was given was a dead link. I noted it in my post, so I am hoping the person that posted it will repost a
    new link. If I get it I will repost it here as well.
    I should add that the Badia Software EportTools demo is excellent. I will be buying it. It allows you to export individual PDF, EPS, PS, JPG, Text, INX and INDD files from any multipaged Indd file. It also allows for comprehensive file renaiming similar to Adobe Bridge, it even has a few twists that bridge might not have. The demo is fully operational for 30 days with no limitations except for a slightly annoying reminder. You can also export in text mode with Indd text tags attached.
    Roger

  • How to read multiple files at multiple locations using properties file

    hi all ,
    in my code i take configuration input from a properties file ,it was really easy but what if there are multiple files ? how can i take configuration input (file path etc) from properties file in that case ? any suggestion ?

    thanks :) ..i am doing like this :
    String fName[]=new String[10];
              String choice[]=new String[10];
              String Delim[]=new String[10];
              ResourceBundle a = ResourceBundle.getBundle("input");
              String n=a.getString("NOF");
              try
                   for(int i=0;i<Integer.parseInt(n);i++)
                        fName=a.getString("PATH"+(i+1));
                        choice[i]=a.getString("HEADER"+(i+1));
                        Delim[i]=a.getString("DELIMITER"+(i+1));
                        putData(fName[i],choice[i],Delim[i]);//to put data in database
              catch (NumberFormatException e)
                   System.out.println("Number of files are invalid");
    hope this method would be fine ....again thanks for the advice :) :)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Cant create adobe files from multiple excel or word files

    This is the first time I have placed anything on this forum so please forgive me if I am in the wrong p
    lace.  I have been frustrated by an error message I get when I try to convert multiple excel files or word files to
    PDF.  The files exist on a network location, and when I select 5 or 6 at random
    and then right click and choose "Convert to PDF", the operation bombs with a message that reads:
    "The file you selected does not contain any data (zero length file).  Please select another file."  I can
    not find anything on this on Adobe's website, or google.  I used to d
    o it fine until a few days ago, now it won't convert and I get the above message.  Anybody have any idea?  I a
    m using Windows XP SP3 and Office 2007 SP1.  Thanks
    Steve Szabo

    I can copy these files to the local drive and do the operation fine.  I can also convert files that are already on the hard drive.
      Just cannot convert the ones that are in the network location.  I used to be able to do it, but not now.
    Steve

  • Delete multiple files from multiple locations using config file

    Hello All,
    I am fairly new to .net and I have to make a windows application to delete files older than 90 days from multi ple locations. these multiple locations cant be hard coded and have to be configurable, also the number of days to delete the files have to be
    configurable.
    I think the answer to this would be an app.config file. but dont know how to use the same.
    can anyone tell me about this and if possible help me out with a code snippet.?

    Add settings like picture below.  Add the string by press the double dot icon.
    The use the code below
    static void Main(string[] args)
    int deleteDays = Properties.Settings.Default.DeleteDays;
    StringCollection folders = Properties.Settings.Default.Folders;
    foreach (string folder in folders)
    DirectoryInfo info = new DirectoryInfo(folder);
    FileSystemInfo[] deleleteFiles = info.EnumerateFiles()
    .Where(x => x.LastWriteTime < DateTime.Today.AddDays(deleteDays))
    .ToArray() ;
    foreach(FileSystemInfo file in deleleteFiles)
    File.Delete(file.FullName);
    jdweng

  • Need some files to execure RFC to download file on the presentaion server

    Hi SAPGURUS,
    I need following files to setup my RFC program. Please let me know if you have it in your system.
    rfc.car
    car.exe
    rfcexec.exe
    thanks a lot for your help.
    Regards,
    Priti

    Hi
    Go thourgh the link
    To download
    http://documentation.softwareag.com/crossvision/sap231/pages/install.htm
    For Documentation
    http://sapabap.iespana.es/sap/info/rfcexec/rfcexec_e.htm
    Regards
    Pavan

  • How to delete multiple old ITUNES LIBRARY files safely ?

    I'd like to clean up my Itunes LIBRARY files, but don't know what's safe to do and not to do. (I have Itunes 8.1 / OSX10.4.11)
    MY QUESTION IS TWOFOLD :
    (1) how do I create a new Itunes library file now with today's date; and
    (2) how do I delete multiple (old) Itunes library files, without risking the loss of what I've got ?
    This all stems from exploring Itunes as a result of a problem I had today... when trying to import mp3's from my terrabyte drive, after about 150 successful mp3 track imports, Itunes froze and everything else on my MAC froze as well (constant spinning colored wheel). After many failed attempts to force quit Itunes, I turned off my MBPro. On restarting, Itunes tooks ages to "import" files. Eventually Itunes opened but with only half of my original tunes (1500+ songs 8.11GB) and had nothing from today's import.
    I found a post suggesting to hold down OPTION while starting Itunes. Then I selected a file from my hard drive > me > music > Itunes > "Itune library" with the most recent date and shezam, Itunes once again has all my songs, as before. Nothing I imported from the terrabyte drive today appears however, but no matter.
    In my "Itunes" file there appear MULTIPLE Itunes libraries ! such as Itunes library, Itunes Library (damaged), and as well a folder called "Previous Itunes Libraries" which itself contains multiple Itunes Library files and multiple "previous Itunes Library files" with dates back to 2007. These I want to clean up and delete .... should I ? ... Can I ?
    I really could use some words of wisdom from the wise ! Thanks in advance

    Whenever you install a new version of iTunes and run it teh first time, iTunes will create a backup of the current iTunes library file and copy it into \Music\iTunes\Previous iTunes libraries, then update the iTunes library file in \Music\iTunes\ for the current version of iTunes.

  • Loading data from multiple files to multiple tables

    How should I approach on creating SSIS package to load data from multiple files to multiple tables. Also, Files will have data which might overlap so I might have to create stored procedure for it. Ex. 1st day file -data from au.1 - aug 10 and 2nd day
    file might have data from aug.5 to aug 15.  So I might have to look for max and min date and truncate table with in that date range.

    thats ok. ForEachLoop would be able to iterate through the files. You can declare a variable inside loop to capture the filenames. Choose fully qualified as the option in loop
    Then inside loop
    1. Add execute sql task to delete overlapping data from the table. One question here is where will you get date from? Does it come inside filename?
    2. Add a data flow task with file source pointing to file .For this add a suitable connection manager (Excel/Flat file etc) and map the connection string property to filename variable using expressions
    3. Add a OLEDB Destination to point to table. You can use table or view from variable - fast load option and map to variable to make tablename dynamic and just set corresponding value for the variable to get correct tablename
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Error Handling in File to Multiple IDOC Scenario?

    Hello Experts,
    My scenario is file with Multiple records and I want to send it to SAP system.If there will be 10 Records in my file I need to create 10 IDOC in Target system.
    I can use below of the two options.
    1) File to Multiple Idoc (1.N Mapping)
    2) Using BPM
    3)Directly place the file in SAP application server and process it via ABAP Program.
    However I am not clear in which option error handling will be more effective.Please suggest.
    Basically I want to handle If out of 10 records 9 are correct and 1 record is not correct then I should be able to report within PI without affecting 9 correct records.Is it possible 9 records will be sent to SAP system and PI will only show error for 1 incorrect record.
    Also I will be doing this scenrio for transaction data with huge size (1 Million Records).Which approach will be more effective in this case.
    Thanks,
    Pushkar

    Hi Patel,
    I want to handle If out of 10 records 9 are correct and 1 record is not correct then I should be able to report within PI without affecting 9 correct records.Is it possible 9 records will be sent to SAP system and PI will only show error for 1 incorrect record.
    when working on graphical mapping, the target structure is created when there are no errors in all records of source structure.
    suppose if we have validation error in 9th and 10th record, then we can not process the first eight records and inturn we can not store the two error records in XI for further.
    i suggest you the third option, you can directly place the file in SAP application server and process it via ABAP Program.
    this is far better because you can do more customizations as you have to deal with millions of records.
    Regards,
    Pradeep A.

  • Mapping error in file(FCC) to rfc scenario

    Hi,
    i am trying to implement mapping in file (fcc) to rfc scenario. the source file is getting picked up, but the problem is arising during mapping. i am unable to generate the target structure. i am attaching mapping structure as follows
    Source Structure                           Target Structure: RFC
    storesales                                     -POSDW-CREATE_TRANSACTIONS_EXT
         recordset                                      it_transaction
           gmd_site_101                                 item
          gmd_site_102
          gmd_site_103
          gmd_site_104
    here the recorset is mapped to item, and fields of subnode gmd_site_101 is mapped to fields of subnode item. similarly, for the other subnodes. but when testing with xml file, the target field is not getting generated. in FCC parameters, ignorerecordset name is set to "true".
    any help would be very helpful..thanks in advance.
    warm regards,
    kartz

    hi
    You can test the data using payload from SXMB_MONI in message mapping test tool so as you can get to know the reason of failure.
    It would be better if you paste the error you are getting over there.
    Check if you have maintained the namespace in CC or not. it should be same maintained if you have kept namespace in message type.
    Also check in FCC parameters you must have used ignoreRecordsetName = true
    Regards
    Raj

Maybe you are looking for

  • Unable to copy music from Mac to Windows PC using Home Sharing on iTunes 12

    Hi all, I use both a Macbook Pro and a Windows PC.  I am trying to copy music from my Macbook Pro onto my PC within iTunes 12 using HomeSharing but seem to be unable to do this. When I connect to the Mac library on the PC, I can play the tracks witho

  • GR is being done in Kgs while the Base Uom of material is PC how is done.

    Hello I want to raise PO for a material which has been Base uom is PC but the GR is being done in KG's. There is no fixed relation between PC and Kg's. how can we handle this situation. Regards Sameer

  • E book does not work

    Previously I bought an ebook and I keep its address in my favorite link, and it worked. However, after a year, when I click that link, abobe home appears and it seems to ask me to buy monthly services. How can I read that e book again? Thank you very

  • LGS308 problem with vlan and multicast

    Hello, I have a LGS308 smart switch and am having problems putting multicast traffic on a specific vlan. The switch is connected to a PC for management (vlan 1). All ports are in acces mode, vlan 1 untagged. I created vlan 2 and put it untagged on po

  • Connecting Oracle Reports (9i or higher) to a DB2 database

    Hi all, this may just be a newbie question. In Oracle reports, is it possible to generate reports getting data from a DB2 database? I asked this because the clients of one of our projects requires us to print reports on both their oracle and db2 data