FILE TO PROXY SCENERIO DEBUGGING
Hi All,
I am using a file_to_proxy scenerio(SAP SYSTEM), it processed sucessfully in quality but is throwing the error in development though we have the same code all around.
Any idea on this will be a great help.
Also i need to debug the code to check out the exect cause of the error but even i am giving the break-point it is skipping out.
Please let me know the steps required to debug the same.
Many thanks,
JGD.
Hi All,
Let me make the things clear,
I have a FILE-->XI-->R/3(PROXY) scenerio,
The file processed sucessfully in XI-->MONI
The file also processed sucessfully in R/3---->MONI,
<b>Now it need to update into the table and here exactly it showing error in validation.
Now i need to know how can i debug in this part. ( FORM R/3 till to the TABLE )
Each time i cant process the file and debug, so is there any option where i can debug it by using the payload.
</b>
Many Thanks,
JGD
Edited by: JGD on May 6, 2008 7:42 AM
Similar Messages
-
How to track return message in file to proxy interface
I am using file to proxy scenerio, where i will get my file from FTP and updating it into a table , after updating i am calling a program to Run BDC, in my method for proxy, after that i dont how to track return message , anyone please tell me suggestion regarding for this
thanking you
SridharHi Sridhar,
What exactly you want to track????
my assumtion is the call will be of asyn mode, once the data reach the proxy method the XI job done and u can easly track that using monitoring.
Regards,
Phani -
File Content Conversion Error in PI 7.1 (file to Proxy)
Hi
I am working on File to Proxy Scenario and I gave the File content conversion as below, File is picking up by the PI Server when I look at Communication Channel Monitoring, However when I open the Message ID in the CC monitoring it says as
404 Not Found
The requested resource does not exist.
and I do not see any message SXMB_MONI(Because the content is not converted), Can anyone give an idea how to debug this
Thanks
PR
Please find the details below which I gave in the content Conversion
Document Name : MT_TW_AK
Document NameSpace : http://aiwcd.com/Claims_Management(CM)_Rel2.0
RecordSet Name : FROISROIAcknowledgement
RecordSet Structure : Header,1,Record,*,Trailer,1
Recordset Sequence : Ascending
KeyField Name :TransactionSetID
Key Field Type : String (Case Sensitive)
IgnoreRecordsetName : true
Header.fieldNames :TransactionSetID,SenderID,ReceiverID,DateTransmissionsent,TimeTransmissionsent,OriginalTransmissionDate,OriginalTransmissionTime,TestProductionCode,InterchangeVersionID
Header.fieldFixedLengths: 3,25,25,8,6,8,6,1,5
Header.keyFieldValue : H
Record.fieldSeparator :
Record.fieldNames : TransactionSetID,RecordSequenceNumber,DateProcessed,TimeProcessed,InsurerFEIN,ClaimAdministratorPostalCode,ClaimAdministratorFein,AcknowledgementTransactionSetID,ApplicationAcknowledgmentCode,InsuredReportNumber,ClaimAdministratorClaimNumber,JuridictionClaimNumber,MaintenanceTypeCode,MaintenanceTypeCodeDate,RequestCode,FreeFormText,NumberofErrors,MaintenanceTypeCorrectionCode,MaintenanceTypeCorrectionCodeDate,JurisdictionBranchOfficeCode,ClaimAdministratorAlternatePostalCode,NumOfErrors
Record.fieldFixedLengths: 3,9,8,6,9,9,9,3,2,25,25,25,2,8,3,60,2,2,8,2,9,19
Record.keyFieldValue : A
Trailer.fieldNames:TransactionSetID,DetailRecordCount,TransactionCount
Trailer.fieldFixedLengths: 3,9,9
Trailer.keyFieldValue : T
ignoreRecordsetName: truePR,
Can you check the error in sender communication channel?
Go to RWB ---> Component Monitoring ---> Adapter Engine ---> Communication cahnnel monitoring --> it displays new page. Then give your file sender communication cahnnel name. There you will definitely see some error.
The error what you are getting is a different to this one. Can you please check the error what I have given above path.
Regards,
---Satish -
Dear one,
I need a solution for my problem facing this moment.
Here is the File to proxy scenario explained.
I created three new fields in XI IR to map three more fields from File to CRM .On this line,I created three fields in IR and passed the updated file(containing three new filelds) and interfaced.Before that I had regenarated and activated CRM level proxy too.
The file was red by XI and moved to CRM also.
Now my problem is that I can see the three new fields in SXMB_MONI when I got into detail of that . But when I debug the CRM proxy the value for these three fields are not displaying over there .
These three values are displayed in XML message but not in proxy ,why it is so?.
Please help me out to resolve the issue.
Swasthi,
KarthikHi Manjusha,
Here is the reply:
Is the issue with the fields , or the values in the fields ?
Ans:Issue is with the values ,not with the fields .
Is it that your proxy structure doesn't have the fields ?
Ans:Proxy structure have the fields but not value.
Can you check sxmb_moni in the CRM system if these fields with value appears.
Ans:I checked in the CRM system
<TOTL_INFO>
<DT_INVOICE>
<MT_Invoice>
<ECOMM_VAT_BASIS_AMT>12</ECOMM_VAT_BASIS_AMT>
<ECOMM_VAT_AMT>13</ECOMM_VAT_AMT>
<ECOMM_CURR_CODE>GBP</ECOMM_CURR_CODE>
</TOTL_INFO>
</DT_INVOICE>
</MT_Invoice>
Both field and values are coming perfectly in XML message..
You can see that above in last three fields (Field- ECOMM_VAT_BASIS_AMT , Value-12 and etc.).
Only values are not coming in proxy structure(table) ....fields are coming with no values
Pls let us know yr views. -
Dear scripters,
I have multiple version of ID installed in my system. I have ID CS,CS2,CS3 and CS4. While I am opening (double click) the ID CS file, automatically the file opening in CS4. For solving this problem I have searched in the forums I found there is a program called INDESIGN PROXY for MAC OSX. It manages the problems well.
Now I am in the process of developing the application same like that for windows using VB. Here is my observation about Indesign proxy.
1. While user double clicks the Indesign file the argument is not passing to the Indesign.exe, but the argument passes to the Indesign proxy. Something like this
"C:\Program Files\Adobe\Adobe InDesign CS4\InDesign.exe" "%1"
to this
"C:\Program Files\IDproxy\proxy.exe" "%1"
2. The proxy exe lists all the version of IDs in a dialog box. If user selects CS2, the proxy exe passes the command argument something like this
"C:\Program Files\Adobe\Adobe InDesign CS2\InDesign.exe" "%1"
3. Now the file will open in correct version.
I am comfort with VB forums and coding but I am struck getting the file path while user double click's the file. I short need to get the file path of "%1" argument.
I think I am detailed.
Kindly advice me how can I proceed more?
Thanks
regards
a r u l
vpublish.netI don't think it's a mistake.
"InDesign CS4 (3.0)"
means: this is the OM for InDesign 3.0 (i.e., InDesign CS) that is contained in InDesign CS4.
Wait -- do you mean there might be a difference between "the OM for InDesign 4.0 (i.e., InDesign CS2) that is contained in InDesign CS4" and, say, "OM for InDesign 4.0 (i.e., InDesign CS2) that is contained in InDesign CS5" ?
Why on earth would anyone need that? I imagine it's not because even with versioning the 'older' scripts may not behave the same -- there must be dozens of mails about versioning not working ... I mean, if Adobe knows what causes older scripts to stop working (because, if I understand you correctly, they retroactively change it in the documentation for older versions), wouldn't it be yet easier to not cause those changes? -
How to use a file transport proxy service as trigger for a webservice
Hi,
I've implemented a alsb file transport proxy service. This proxy is watching a common directory and detects new files. After detection, the proxy move them in an archive folder.
After that I want call an external webservice with the filename as input parameter.
How can I comfigure that with the alsb console.
best regards
Oliver
with the to extract the filename after it was renamed by the proxy service.How do you invoke/ instantiate the file based proxy service. Does it just run on activation in sb console? Does it continue to detect files or does it stop after detecting one file?
Also what is the format of the URL that points to the file folder.
For Ex: I have a folder named "TestFiles" on the C:\drive of the server.
Edited by premkumr at 10/31/2007 3:26 PM -
I am having a hard time with my fcp x running so slow. i can't even move my mouse without the time wheel coming on and staying up for at least 20 some seconds. I have upgraded my ram to 12 and changed all my files to proxy files; also i cleaned the crap out of my computer removing all other media files I didn't need and it is still running the same. Please help! I have a deadline on my short film to be submitted and I can't finish it like this. Oh also it ran fine in the beginning but and one day it just started doing this out of no where. Anything will help! Thanks
In addition have you got FileVault switched on as that will kill performance.
-
Error in FILE 2 Proxy Scenario
Hi All,
I am doing File to Proxy Scenario i am getting following error
Could any one provide the solution for this.
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- <!-- Call Inbound Proxy*
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_Emp_Sender</SAP:P2>
<SAP:P3>Namespace</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_Emp_Sender, request message, namespace )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks in Advance
Mahesh
</SAP:Error>
Edited by: Mahesh Reddy on Jul 10, 2008 12:47 PMHi Mahesh,
1) Use SPROXY transaction.
Menu-> Proxy -> Activate All.
2) check in the interface determination if u are using correct
inbound interface.
3) If this if fine....try deleting all proxy objects of the interface
and create new.
Regards,
Praveen K -
File to Proxy Scenario : Error in communication channel monitoring
Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
ChandravadanHi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani -
Problem in FILE to RFC scenerio
Hi,
I am working on File to RFC Scenerio
I am getting a problime in Communication channel (Sender).
The problem is coming in File COntent Conversion
Parameters are like
Documenet name : MT_ROXY ( ->Header -> EMPNO
-> EMPNAME
-> DEPTNAME)
Recordset Name: Details
Recordset str : HEADER,*
Recordset Seq : Variable
" per message :*
Conersion Params:
ignoreRecordsetName : True
HEADER.addHeaderLine : 0
HEADER.fieldSeperator: ,
HEADER.endSeperator: 'nl'
HEADER.fieldFixedLengths : 12,40,40
HEADER.fieldNames :EMPNO,EMPNAME,DEPARTMENTNAME
HEADER.lastFieldsOptional : YES
Problem:The message content i am getting is like
<ns:MT_ABAPPROXY>
−
<HEADER>
<EMPNO>IT,Munish,22</EMPNO>
</HEADER>
−
<HEADER>
<EMPNO>IP,Munish1,2</EMPNO>
</HEADER>
−
<HEADER>
<EMPNO>IS,Munish2,2</EMPNO>
</HEADER>
−
<HEADER>
<EMPNO>IQ,Munish3,2</EMPNO>
</HEADER>
−
<HEADER>
<EMPNO>IR,Munish4,2</EMPNO>
</HEADER>
</ns:MT_ABAPPROXY>
as it does not dividing the Fields by ,
as it shud come like
<EMPNO>IR,2</EMPNO>
<EMPNAME>Munish5</EMPNAME>?
<DEPARTMENTNAME>2</DEPARTMENTNAME>
but its not taking the other 2 filds and not separating by , sepreator,
Kindly guide me in solving this problem on urgent basis
Thanks in Advance
Munish SInghHI,
Then use only fieldSeparator see the spelling it should be in proper case.
refer the below weblog for more information:
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
Also refer the file FCC parameters.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
Thnx
Chirag -
Content conversion in File to Proxy in PI 7.1 V
Hi Experts
I am working on a File (Text file) to Proxy scenario in PI 7.1 Version where I receive the text file from the sender and need to convert into xml by using the Content conversion
The text file which I receive have multiple Record Structures which have Parent and Child data elements
Example
Header
_____ Fld3
________Fild1----
_____Fld4
________Bank Account details-------
_____Fld5
Detail----
________Fld2----
_____Fld6
________ Credit Card Details _______Fld7
|________ Payment details -
| _______Fld8
|
|_______Fld9
Trailer1
Trailer2
Can anyone give an idea How to define the record set structures and the corresponding fields in the Field names
Can any one send me the link if there is any blog exists which shows above scenario
Thanks a lot
PR
Edited by: PR on Aug 6, 2009 9:21 PM
Edited by: PR on Aug 6, 2009 9:23 PMSatish
I have sender file my structure as follows
1. Header (record set1)
TransactionId (field1)
TestProdcd (field2)
Sender (field3)
ID -
((Subfield1)
FEIN -
(Subfield2)
PostalCode-----(Subfield3)
Receiver
ID -
((Subfield1)
FEIN -
(Subfield2)
PostalCode-----(Subfield3)
Transmission
Date
Time
OriginalName
2. Record (record set2)
Transaction
SeqNum
ReportTypeCd
ProcessDate
Processtime
ApplicationAckd
RequestCd
3. Trailer (RecordSet 3)
RecordCt
TransactionCt
TransactionsetID -
File 2 Proxy Process in PI 7.1
working on File to Proxy Scenario and I gave the File content conversion as below. Incoming file contains 3 record structures Header, Record & Trailer File is getting processes only where there is only one record in the record structure
The error which I receive is
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'Record':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
Please suggest what needs to be done on this
Thanks
PR
Document Name : MT_TW_AK
Document NameSpace : http://aiwcd.com/Claims_Management(CM)_Rel2.0
RecordSet Name : FROISROIAcknowledgement
RecordSet Structure : Header,1,Record,*,Trailer,1
Recordset Sequence : Ascending
Recordsets Per Message : *
KeyField Name :TransactionSetID
Key Field Type : String (Case Sensitive)
IgnoreRecordsetName : true
Header.fieldNames :TransactionSetID,SenderID,ReceiverID,DateTransmissionsent,TimeTransmissionsent,OriginalTransmissionDate,OriginalTransmissionTime,TestProductionCode,InterchangeVersionID
Header.fieldFixedLengths: 3,25,25,8,6,8,6,1,5
Header.keyFieldValue : HD1
Header.lastFieldsOptional : true
Record.fieldNames :TransactionSetID,RecordSequenceNumber,DateProcessed,TimeProcessed,InsurerFEIN,ClaimAdministratorPostalCode,ClaimAdministratorFein,AcknowledgementTransactionSetID,ApplicationAcknowledgmentCode,InsuredReportNumber,ClaimAdministratorClaimNumber,JuridictionClaimNumber,MaintenanceTypeCode,MaintenanceTypeCodeDate,RequestCode,FreeFormText,NumberofErrors,MaintenanceTypeCorrectionCode,MaintenanceTypeCorrectionCodeDate,JurisdictionBranchOfficeCode,ClaimAdministratorAlternatePostalCode,NumOfErrors
Record.fieldFixedLengths: 3,9,8,6,9,9,9,3,2,25,25,25,2,8,3,60,2,2,8,2,9,19
Record.keyFieldValue : AKC
Record.lastFieldsOptional: true
Trailer.fieldNames:TransactionSetID,DetailRecordCount,TransactionCount
Trailer.fieldFixedLengths: 3,9,9
Trailer.keyFieldValue : TR2
Trailer.lastFieldsOptional : true
ignoreRecordsetName: trueHi PR,
I see few things may need a change. First .lastFieldsOptional is obselete now and must not be used. Please see this help for this:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
> Recordsets Per Message : *
You can leave this blank
> ignoreRecordsetName: true
You have given twice. If you give once is OK.
Also the error might be saying you are missing few fields in the last. Since fixed length file if you dont have field you should have spaces in teh file. check that also. Also try to give sample file here so that somebody can help you out.
Regards,
---Satish -
File to RFC Scenerio in PI 7.1
Hi Experts,
Please provide any documents for File to RFC Scenerio in PI 7.1The procedure is the same as it was in SAP PI7.0 or lower versions.....no major change on this front.
Search SDN for documents related to your protocol.
Regards,
Abhishek. -
File Process in File 2 Proxy in PI 7.1
Hi
I am working on a File to Proxy scenario where File will have multiple records, When I execute the scenario whole content of the file is coming as single record,
I want to process the each record at a time from the file, Can anyone let me know how to process the each single record at a time from the file
Thanks
PRPR,
Try to read the file as record by record. Proabably there might be some error in reading the file with your content conversion. If you can give the content conversion parameters you used and one sample file somebody can help you out PR.
Else if you want to read the whole file as one record which you think is the correct process then you may need to write either java mapping or abap mapping.
Regards,
---Satish -
File to Proxy in PI 7.1
Hi
I am working on File to Proxy Scenario and I will be receiving the text file from the sender,
There are three segments in the File from the sender (Header, Record, Trailer), and need to process the single message each time,
Do I need do the content conversion to convert the Text file into the xml (Proxy),
Thanks
PRyes, first you have to convert to a XML format your plain file. and later send the data to proxy.
Regards
Maybe you are looking for
-
I am trying to update our Adobe Reader and Acrobat Pro to 11.0.10 using the default MSP packages with SolarWinds Patch Manager. All of the systems keep reporting as 'NOT APPLICABLE'. All of the workstations have Reader11.0.09, with about 10% still
-
I have installed the Oracle Developer 6.0 and Oracle8 packages on my 95 Windows computer. The Oracle listener will not execute properly. I configured the tnsnames.ora file like the book says too, but when I try to execute in from the run prompt on th
-
Is there a plugin anyone knows of, or a technique that will allow the iTunes visualizer to run a folder of images in a slideshow. Just sort of curious, I know there are numerous otherways I could get the same effect. tim
-
Bar Code Printing in Report under AIX Env
Dear All, Iam using Oracle forms11g, Reports11g,Oracle11g DB in AIX Env. My client sys is window 7. When i try to print report in a Network Printer i can able to print report. But if any field having barcode , which is not printing. Please guide any
-
Hi SRM Experts, In SRM7.0 SC workflow, I have an approval task description question. In process level configuration, I assigned the standard task id 40007953 which is SRM SC cart approval. The standard task description shows "You are r