File txt- XI- BAPI
Hello everybody,
We need to configure a scenario as follows File txt->XI->R/3, can anybody help with an example, I found examples with xml files, but I really have no idea how to process a txt File and pass it to a XI structure, any help would be really really appreciated, thanks in advance.
Regards
Julio Cesar
Hey,
Firstly go thorugh File Content Conversion Parametes that are required to process a text file.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Configuration in the IR remains the same for both xml files or txt file.
In ID during adapter configuration you need to set FCC parameter:- Prerequisite is you should have set your message protocol to File Content Conversion.
Specify parameters for FCC. To do so follow the blog
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
If you havn't done this before try doing a file to file with fcc then go for rfc.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Doesn't take much tym. Gud luck.
<b>Cheers,
*RAJ*
**REWARD POINTS IF FOUND USEFULL <b>
Similar Messages
-
File to RFC/BAPI - Async- How to capture response field value
Hi,
I am doing File to RFC/BAPI Scenario. I have Two BAPI's. THe same source xml file is mapped to the Two Target BAPI's.
For the first flow i.e File to BAPI1, I need to capture BAPI Response, field value and pass this value as Input to the BAPI2.
How do I proceed with the Mapping. I am working on PI 7.1
Any input would be Appreciated.
Thanks & Regards,
VarunHi Varun,
apparently you need a Business Process:
XML -> BP (asynchronous), Map to Bapi1 request structure
BP -> BAPI 1 (synchronous)
Transformations step with multi mapping merging XML and Bapi1 response to Bapi2 request structure
BP-> BAPI2
Regards,
Udo -
I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid.
It appears that the problem is with the rights of the user that's running the package (it's a proxy account). If I use a higher-privelege account (domain admin) to run the package it completes successfully. But this is not a long-term solution, and I can't
see a reason why the user doesn't have rights to the file. The effective permissions of the file and parent folder both give the user full control. The user has full control over the share as well. The user can access the file (copy, etc) outside the SSIS
package.
Running the package manually via DTExec gives me the same error - I've tried 32 and 64bit versions with the same result. But running as a domain admin works correctly every time.
I feel like I've been beating my head against a brick wall on this one... Is there some sort of magic permissions, file or otherwise, that are required to use a flat file target in an SSIS package?Hi Rossco150,
I have tried to reproduce the issue in my test environment (Windows Server 2012 R2 + SQL Server 2008 R2), however, everything goes well with the permission settings as you mentioned. In my test, the permissions of the folders are set as follows:
\\ServerName\Temp --- Read
\\ServerName\Temp\Source --- No access
\\ServerName\Temp\Source\Flat Files --- Full control
I suspect that your permission settings on the folders are not absolutely as you said above. Could you double check the permission settings on each level of the folder hierarchy? In addition, check the “Execute as user” information from job history to make
sure the job was running in the proxy security context indeed. Which version of SSIS are you using? If possible, I suggest that you install the latest Service Pack for you SQL Server or even install the latest CU patch.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Hello everybody!
I have scenario as below.
IDOC->XI->file.txt
I must transfer my packing list from idoc to file txt. The file txt must have a lot of lines for several levels of packing.
I think to try to processing an IDOC message many times over.
How can I Make?
Or have you another idea?
Thanks a lot!Hi Demetrio,
Please have a look at the below weblogs...i hope it will help you to solve ur requirement...
XI:Idoc Message Packages
/people/sravya.talanki2/blog/2005/12/09/xiidoc-message-packages
Collecting IDocs without using BPM
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
IDOCs (Multiple Types) Collection in BPM
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Thanks,
Aravind.pujari -
How can i read Thai language in file .txt?
AttN; Whom may concern.
How can i read file txt in other language (Asian language such as Japanese, Thai, or Korea)?
Please let me know urgent... I have to use it urgently...
Best Regards,
Sae
Solved!
Go to Solution.Hello Sae,
Welcome to the Sony Community.
What is the model number of the Reader Digital Book?
The Reader supports the text file (.txt) formats as well as the following two formats:
- EPUB file (.epub) EPUB (OPS version 2.0) supported
- PDF file (.pdf) Support is based on the PDF 1.6 specification.
The default language setting on your Reader Digital Book does not affect the language the book is in. To read books in a foreign language, you will have to purchase them specifically in that language.
Thank you for your post. -
SQL (Injection) Vs Flat File TXT Vs XML (XPath Injection) For Database.
I will have to deal with robust login sessions so I need some advice on what type of database and language I will use.
PHP and MySQL is the choice but I hear that flat file TXT are more faster so I am thinking about Perl.
Perl is very flexiple and have many advantages but why do many folks use PHP.
SQL and XPath injection are becoming more frequent plus MD5 and SH512 have been cracked by some angry folks.
The Perl community is becoming very small so it will be difficult to receive support if I have a specific problem.In our projects we are extracting SMS messages and
based on the
MISDN (Telephone number) of each SMS we are fetching
the corresponding
account information (server name and password) from
the database through (connecting through)
webservice.The data is stored in the DB which you are accessing through a webserivce and that's too slow and unreliable so you are caching the results in a text file...
That's horrible. The party responsible for the webservice should be fixing it or you should rethink the architecture. All this extra complexity and basically it's just causing problems for you. You'd be better off just accessing the DB directly. I assume this is possible since you know there is a database. In a good SOA architecture, you should not know or care about where the data is persisted.
This webservice connection is slow/unreliable so a
local copy of the
MISDN number and corresponding account information
are stored/updated in flat files tp prevent repeated
accessing through webservice.
My question is-which will be faster for accessing,
using txt file or xml or a different format.I don't think it's going to matter much at all for the numbers you site, unless you are running this on a 20 year old PC or something.
But I think you are addressing the wrong problem. -
Hi,
I am trying to change the permissions of file (file name has spaces) using the Runtime.getRuntime().exec() method on AIX platform. My sample code is -
import java.io.*;
public class ChangeMode
public static void main(String[] args)
Process p = null;
String cmd = null;
cmd = "chmod " + "000" + " " + "a file.txt";
try
p = Runtime.getRuntime().exec( cmd );
p.waitFor();
catch( Exception e )
e.printStackTrace();
System.out.println("The exit value "+p.exitValue());
In this case - I am getting exitValue of 2.
But, the strange part is that - I am able to run the command
"chmod 000 a file.txt "
from the command prompt successfully.
Any ideas what does an exitValue of 2 means and where is this program getting failed.
Thanks!
~SaurabhIs 'a file.txt' the file name ?
If I'm right, the Runtime.exec(String cmd) method will split the given string (using spaces.)
The first token will be used a the command and the other ones as the arguments.
In your example it will call chmod with three arguments: 000, a and file.txt
In order to avoid that, you should either use the Runtime.exec(String[] cmd) method with: String[] cmd = new String[] {"chmod", "000", "a file.txt"};or try to put your file between ticks: String cmd = "chmod 000 'a file.txt'";You could have a look at this article to learn more about Runtime.exec() :
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
I hope it will help. -
Scenario File to RFC (BAPI): BAPI not executed successful
Hi Dear Friends!
At execution of asynchronous Scenario File to RFC (BAPI BAPI_ACC_DOCUMENT_POST)
I have the following error in RWB Communication Channel (RFC receiver):
- Error: 2007-07-25 11:08:25 EEST: Message processed for interface BAPI_ACC_DOCUMENT_POST:
com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message
to remote system:com.sap.aii.af.rfc.core.client.RfcClientBapiException:
BAPI not executed successful
Simultaniously <b>Test Configuration</b> was executed successfully. And mapping is good.
But I don't any message in <b>target system</b> in <b>sxmb_moni</b> (formed by BAPI).
In <b>XI system</b> I see in <b>sxmb_moni</b>:
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface mi_sender*</Trace>
<Trace level="1" type="T">select interface namespace urn:file:to:bapi</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
Please help me understand my error.
With the best regards,
Natalia MaslovaHi, Dear Friends! Thanks for support!
My settings of
Connection between systems:
DX7 01 (client 001) - XI Integration Server and DE2 13 (client 200) - target system.
Phisically both systems are in one server: 10.20.30.24 (srv24)
Business system DE2_200 has Communication Channel: cc_bapi_r, its settings (in Integration Builder Configuration):
Adapter Type: RFC
Receiver
Transport Protocol: RFC
Message Protocol: RFC (RFC XML)
Adapter Engine: Integration Server
RFC Client Parameter:
RFC Server Type: SAP System
Application Server: 10.20.30.24
System Number: 13
Authentication Mode: Use Logon Data for SAP System
Logon User: n_maslova
Logon Password: *******=*******
Logon Language: EN
Logon Client: 200
Maximum Connections: 1
x Advanced Mode
x Send 'Confirm Transaction'
x Commit Handling for Single BAPI Calls
x BAPI Advances Mode
Successful RETURN-TYPE Values: 0
As I understand these settings are the settings of RFC-destination for target system DE2 13 (200) from XI (DX7 01 001).
In SLD, Business system DE2_200 is defined as:
Integration:
Role: Application System
Related Integration Server: DX7_001
Technical System: DE2 on srv24
Client: 200 of DE2
Logical System Name: DE1CLNT200
In target system DE2 13 (200) with the help of transaction sm59 I created
RFC-destination DX7_001 of type H:
Technical setting parameters:
Target Host: 10.20.30.24
Prefix Path: /sap/xi/engine/?type=entry
Service Number: 8001
Registration and Safe:
SSL: Non active.
SSL: client certificate: DFAULT SSL-client
Enter to system:
Language: EN
Client: 001
User: PIAPPLUSER
Status PW: saved
Password: ********
After that in this system DE2 13 (200) with the help of transaction sxmb_adm I set in Integration Engine -> Configuration -> Configurate Integration Engine
(Change Global Configuration Data):
Role of Business System: Application System
Related Integr. Server: dest://DX7_001
Best regards,
Natalia -
Create an outbound flat file .txt file from SAP to UAPM.
How to Create an outbound flat file .txt file from SAP to UAPM (Unicenter Asset Portfolio Management).
What do u want in flat file and what is your doubt please let me know as iam working i can help u
-
How to convert Flat file(.txt) data to an Idoc format(ORDERS05)
Hi,
How to convert Flat file(.txt) data to an Idoc format(ORDERS05). If any FM does the same work please let me know.
thanks in advance,
Chand
Moderator message : Duplicate post locked. Read forum rules before posting.
Edited by: Vinod Kumar on Jul 26, 2011 11:11 AMHi,
For more information, please check this link.
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Have a look at the FM IDOC_XML_FROM_FILE. May be it helps...
Regards -
HI EXPERTS,
I AM FRESHER IN BPM.
HERE IS A SCENARIO I HAVE TO IMPLEMENT.
A TEXT FILE(SALES) WAS RECEIVED AND IT SHOULD BE SEND TO XI(BPM) WHICH WILL BE CONNECTED TO 4 BAPI'S . HERE THE SCENARIO IS, BASED ON THE FIRST BAPI RESPONSE , SECOND BAPI REQUEST WILL BE GENERATED.
BASED ON SECOND BAPI RESPONSE, THIRD BAPI REQUEST IS GENERATED. AND FOURTH BAPI IS GENERATED BASED ON THIRD BAPI RESPONSE.
I THINK I GAVE SUFFICIENT INFORMATION.
POINTS REWARDED..........
THANKS IN ADVANCE.Hello,
Check this thread,
FILE to multiple BAPI/RFC calls
**********Reward points,if found useful -
ello everybody.
Someone can help me to load a external file .txt in After Effects CC 2014.0 Release / Mavericks OS X 10.9.4 (13E28)?
I tried the code bellow, but doesn't work.
try{
myPath = "~/Desktop/source.txt";
$.evalFile(myPath);
eval(thisComp.name)[0];
}catch(err){
"MISSING";
The source.txt file have the texts bellow:
var comp1 = ["Title”, “Subtitle”, “Description”];
var comp2 = ["Text 0", "Text 1", "Text 2"];
var comp3 = ["Text 0", "Text 1", "Text 2"];
Thanks.This is the text file (with the modified first line) that I used:
var comp1 = ["Title", "Subtitle", "Description"];
var comp2 = ["Text 0", "Text 1", "Text 2"];
var comp3 = ["Text 0", "Text 1", "Text 2"];
Dan
BTW - I did test it on AE CC 2014 -
Write from file XML to file .txt ???
file xml :
<Dictionary>
<record>
<word>Techer</word>
<meaning>Giao Vien</meaning>
</record>
<record>
<word>Student</word>
<meaning>Sinh Vien</meaning>
</record>
</Dictionary>
I want write file.txt with format:
Teacher GiaoVien Student Sinh Vien ......
Help Me ...ThanksSorry, i don't mean that..
as i say, as3 read the data from file sorting like that:
1,john,ny
2,jessy,cal
3,smith,nj
how can i pass those values to the textboxes . id , name , address
so i can go next and previous
thank you again.. -
Hello,
How I do to create a file txt with action script.
Thanksyou can't use actionscript alone. you'll need to use
something else in addition to flash like some server-side code
(php, perl etc). -
When i make place for file.txt in adobe in design CS6 the words shown as ??? ( like a photo )
So what can i do plz ??When you place check on : Show Imort Options
On Text Import Options change Character Set: to Arabic (Macintosh
Maybe you are looking for
-
Unable to read multiple files in BODS
hi all, i am unable to read multiple files [with same format of fields] using wild card characters in file name. scenario: i have 2 files: test1.xlsx & test2.xlsx in the excel file format, for the file name column, i have given test*.xlsx. and done t
-
Using Fields in Reports with stored Data
Hello, i like to use fields in Reports with saved Data in it. Is this possible ? Example: A Invoicereport with saved Data in a File. Now i like to get the Field Invoice_ID to use this in VB.net. Any Idea ? VS2008 with CR_reports in 8.5 Thanx
-
Issues saving Stamps Acrobat 9
I have a client who uses Adobe Acrobat 9. When she creates a stamp, it would used to save it and she could use it the next day. Now, starting about 3 months ago according to the user, when she reboots her machine, it deletes all stamps she previous
-
Are there some Font supporting all utf-16 code including all supplementary?
Are there some Font supporting all utf-16 code including all supplementary code? In an application, I need to show some text encoded in utf-16, which is multilingual and Have some of supplementary character, so want to know a font to show it correctl
-
when i put a blank disc into the drive and click the burn icon in itunes, it says checking media for awhile, and then it says please insert a blank disc and the drive opens. i have tried different types of blank cds and tried using both drives but th