FileName from the Content Server

Hi All ,
I need to show the FileName of a File uploaded into SAP Content Server .
Example if I upload fiel ABC.pdf I should be able to get the name "ABC.pdf" form content server
is there any FM available ?
Note : While storing the file into content server it is creating the unique ID(system generated GUID) for each uploaded File.
Using this ID I am able to show the contents of file using FileDownload but the label I need to show as the FileName and
not the ID.
Regards,
Ravi

I am having this problem as well, with IE5.0 as well as IE5.5 on Windows 2000. I have tried the above suggestion and that doesnt seem to work. I have also tried to use a
Content-Disposition of "inline" to just view
the document and that seems to work incorrectly too; an IE dialog comes up
asking to open/save the download JSP.
I have tried loads of variations and based
my code on Marks stuff posted in this group
e.g. renderContent.
Any more suggestions/work arounds?
Darren.
null

Similar Messages

To featch the documents (.PDF,.DOC etc) from DMS (Content server)

I want to featch the document like pdf,doc etc through ORACLE databse.The documents are in DMS content server having MAXDB as database

> I want to featch the document like pdf,doc etc through ORACLE databse.The documents are in DMS content server having MAXDB as database
Ok, where's the question in this post?
Anyhow, SAP content server is available on MaxDB only.
The documents in it are stored in LOB-columns with a content server-internal format.
To get the stored files back as documents they must be fetched via the content server.
Once the files are correctly received from the content server you may store them to another database again.
But there is no direct way to move them from MaxDB content server to Oracle.
regards,
Lars

Filename encoding on content server

Hi experts,
In DMS we are using file system repository from the SAP Content Content installed on HP-UX. When we save files with the russian filename all symbols in the saved file are encoded with % + hexadecimal representation. So we can save files only with the short names. When we try to save file with the long filename its encoded name exceed 256 symbols limit and system give us an error.
I appreciate any suggestion or any workaround.
Best Regards
Pavel

The official answer from SAP:
Content Server operates on Non unicode mode which means it cannot store
the files or documents with special characters(russian here ),Hence KPROLayer before it sends the document for Storage to the Content Server it
converts the russian file name to binary format.
During the Conversion each special(russian) is mapped to particular
format, hence after conversion the file name would be large,Since it is
a File System Repository,the operating system wont allow to create the
files larger than 255 characters.
Hence this is a limitation from Operating system, the files exceed 255
characters, it is not supported.
Even if the Content Server is based on MaxDB, the length of the
converted result is same and MaxDB also has the maximum filename
restriction of 254 characters.
If the ECC system is unicode,the length of the converted result will be
short than now (this is the behaviour in our internal system which is
unicode).This should resolve the issue, but we are not completely sure
of this.
However if you use R3 System Database, there will be no issue as
conversion does not happen there.
But with MaxDB it works.

Error While defining the content server

Dear Folks,
We are trying to define the content sever in our sever. It is required for integration of SAP with documentum. We are trying to define in below path.
Cross-Application Components - Document Management - General data - Settings for storage systems - Maintain storage system -
It already have DMS_C1 content repository with storage type R/3 database. We are creating a new content repository with storage type HTTP Content Server. We are giving below inputs.
Vesion No. 0045, HTTP Server - (My machine's FQDN and port is 8080), HTTP script as - sap/bc/contentsever/300.
After giving above inputs, if I click on test connection, I m getting error as Error in HTTP Access:IF_HTTP_CLIENT -> RECIEVE1 ICM_HTTP_CONNECTION_FAILED.
If I define the HTTP content sever as sap-qas.vsnl.co.in (i.e. My quality servers host name) it works fine i.e. connection test goes OK. Does any one know how we can define the content server and what all steps required for the same?
Thanks and Regards,
Kedar

Hi Kedar,
YOu have to provide the details as fallows
Storage type : HTTP content server
Version no. : 45 (based on the content server version)
HTTP server : <content server IP>
Port Number of content server : 1090 (default port)
HTTP Scrip : ContentServer/ContentServer.dll
Once after these details you can check
Also install the DBM gui in your local PC and add this content servers database (if the content server is on MAX DB) then you need to star it from the console or else use the command to start it once after the installation.
/sapdb/programs/bin/dbmcli -d <SID> -u control,plmcont db_state - to check the database status
/sapdb/programs/bin/dbmcli -d <SID> -u control,plmcont db_online - to start the database
Thanks,
Chaitanya

File from the Application server

Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev Gupta

Hi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *                     &----
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Regards
Anji

Upload tab-delimited file from the application server to an internal table

Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.

Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename   OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
      data(4096),
      END   OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
      lifnr LIKE blf00-lifnr,
      anred LIKE blfa1-anred,
      bahns LIKE blfa1-bahns,
      bbbnr LIKE blfa1-bbbnr,
      bbsnr LIKE blfa1-bbsnr,
      begru LIKE blfa1-begru,
      brsch LIKE blfa1-brsch,
      bubkz LIKE blfa1-bubkz,
      datlt LIKE blfa1-datlt,
      dtams LIKE blfa1-dtams,
      dtaws LIKE blfa1-dtaws,
      erdat LIKE lfa1-erdat,
      ernam LIKE lfa1-ernam,
      esrnr LIKE blfa1-esrnr,
      konzs LIKE blfa1-konzs,
      ktokk LIKE lfa1-ktokk,
      kunnr LIKE blfa1-kunnr,
      land1 LIKE blfa1-land1,
      lnrza LIKE blfa1-lnrza,
      loevm LIKE blfa1-loevm,
      name1 LIKE blfa1-name1,
      name2 LIKE blfa1-name2,
      name3 LIKE blfa1-name3,
      name4 LIKE blfa1-name4,
      ort01 LIKE blfa1-ort01,
      ort02 LIKE blfa1-ort02,
      pfach LIKE blfa1-pfach,
      pstl2 LIKE blfa1-pstl2,
      pstlz LIKE blfa1-pstlz,
      regio LIKE blfa1-regio,
      sortl LIKE blfa1-sortl,
      sperr LIKE blfa1-sperr,
      sperm LIKE blfa1-sperm,
      spras LIKE blfa1-spras,
      stcd1 LIKE blfa1-stcd1,
      stcd2 LIKE blfa1-stcd2,
      stkza LIKE blfa1-stkza,
      stkzu LIKE blfa1-stkzu,
      stras LIKE blfa1-stras,
      telbx LIKE blfa1-telbx,
      telf1 LIKE blfa1-telf1,
      telf2 LIKE blfa1-telf2,
      telfx LIKE blfa1-telfx,
      teltx LIKE blfa1-teltx,
      telx1 LIKE blfa1-telx1,
      xcpdk LIKE lfa1-xcpdk,
      xzemp LIKE blfa1-xzemp,
      vbund LIKE blfa1-vbund,
      fiskn LIKE blfa1-fiskn,
      stceg LIKE blfa1-stceg,
      stkzn LIKE blfa1-stkzn,
      sperq LIKE blfa1-sperq,
      adrnr LIKE lfa1-adrnr,
      mcod1 LIKE lfa1-mcod1,
      mcod2 LIKE lfa1-mcod2,
      mcod3 LIKE lfa1-mcod3,
      gbort LIKE blfa1-gbort,
      gbdat LIKE blfa1-gbdat,
      sexkz LIKE blfa1-sexkz,
      kraus LIKE blfa1-kraus,
      revdb LIKE blfa1-revdb,
      qssys LIKE blfa1-qssys,
      ktock LIKE blfa1-ktock,
      pfort LIKE blfa1-pfort,
      werks LIKE blfa1-werks,
      ltsna LIKE blfa1-ltsna,
      werkr LIKE blfa1-werkr,
      plkal LIKE lfa1-plkal,
      duefl LIKE lfa1-duefl,
      txjcd LIKE blfa1-txjcd,
      sperz LIKE lfa1-sperz,
      scacd LIKE blfa1-scacd,
      sfrgr LIKE blfa1-sfrgr,
      lzone LIKE blfa1-lzone,
      xlfza LIKE lfa1-xlfza,
      dlgrp LIKE blfa1-dlgrp,
      fityp LIKE blfa1-fityp,
      stcdt LIKE blfa1-stcdt,
      regss LIKE blfa1-regss,
      actss LIKE blfa1-actss,
      stcd3 LIKE blfa1-stcd3,
      stcd4 LIKE blfa1-stcd4,
      ipisp LIKE blfa1-ipisp,
      taxbs LIKE blfa1-taxbs,
      profs LIKE blfa1-profs,
      stgdl LIKE blfa1-stgdl,
      emnfr LIKE blfa1-emnfr,
      lfurl LIKE blfa1-lfurl,
      j_1kfrepre LIKE blfa1-j_1kfrepre,
      j_1kftbus   LIKE blfa1-j_1kftbus,
      j_1kftind   LIKE blfa1-j_1kftind,
      confs LIKE lfa1-confs,
      updat LIKE lfa1-updat,
      uptim LIKE lfa1-uptim,
      nodel LIKE blfa1-nodel.
DATA: END   OF vendor_file_x.
FIELD-SYMBOLS: <field>,
                <field_1>.
DATA: delim          TYPE x        VALUE '09'.
DATA: fld_chk(4096),
      last_char,
      quote_1     TYPE i,
      quote_2     TYPE i,
      fld_lth     TYPE i,
      columns     TYPE i,
      field_end   TYPE i,
      outp_rec    TYPE i,
      extras(3)   TYPE c        VALUE '.,"',
      mixed_no(14) TYPE c        VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
    APPEND data_tab.
ELSE.
    EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
    DO columns TIMES.
      ASSIGN space TO <field>.
      ASSIGN space TO <field_1>.
      ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
      SEARCH data_tab-data FOR delim.
      IF sy-fdpos > 0.
        field_end = sy-fdpos + 1.
        ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
        IF <field_1> CO mixed_no AND
           <field_1> CA extras.
          TRANSLATE <field_1> USING '" , '.
          CONDENSE <field_1> NO-GAPS.
        ENDIF.
* If first and last characters are '"', remove both.
        fld_chk = <field_1>.
        IF NOT fld_chk IS INITIAL.
          fld_lth = strlen( fld_chk ) - 1.
          MOVE fld_chk+fld_lth(1) TO last_char.
          IF fld_chk(1) = '"' AND
             last_char = '"'.
            MOVE space TO fld_chk+fld_lth(1).
            SHIFT fld_chk.
            MOVE fld_chk TO <field_1>.
          ENDIF.       " for if fld_chk(1)=" & last_char="
        ENDIF.         " for if not fld_chk is initial
* Replace "" with "
        DO.
          IF fld_chk CS '""'.
            quote_1 = sy-fdpos.
            quote_2 = sy-fdpos + 1.
            MOVE fld_chk+quote_2 TO fld_chk+quote_1.
          ELSE.
            MOVE fld_chk TO <field_1>.
            EXIT.
          ENDIF.
        ENDDO.
        <field> = <field_1>.
      ELSE.
        field_end = 1.
      ENDIF.
      SHIFT data_tab-data LEFT BY field_end PLACES.
    ENDDO.
    APPEND vendor_file_x.
    CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR   data_tab.
REFRESH data_tab.
FREE    data_tab.
Rob

Error while starting the content server

Hi,
I have installed UCM and when i start the content server, it says it was succesful but logs show the below error.
Unable to publish the schema. Published schema directory could not be swapped into its proper location. [ Details ]
An error has occurred. The stack trace below shows more information.
!csSchemaUnableToPublish!csSchemaFailedToMovePublishedFilesIntoPlace
intradoc.common.ServiceException: !csSchemaFailedToMovePublishedFilesIntoPlace
at intradoc.server.schema.StandardSchemaPublisher.doPublishing(StandardSchemaPublisher.java:349)
at intradoc.server.schema.StandardSchemaPublisherThread.run(StandardSchemaPublisherThread.java:252)
ANy idea wats going on.
I have done the required changes in the confd of the webserver, Content server is accessible from the webpage. I am also able to login as sysadmin.
Not sure wats going wrong.
Thanks

You can sometimes get issues on the file system with file locking occurring and so UCM can not clear up/move the schema files properly.
It may not be this but...There should me a metalink note about this deleting schema directories.
Tim
Edited by: Tim Snell on 06-May-2010 13:00

Using GOS to store business document on the content server

Hello All,
BACKGROUND
We use content server to store business documents via ArchiveLink. The process to store a business document is via Generic Object Services menu path "Create -> Store business document".
ISSUE
When document is stored in such a way, the actual name of the document is not displayed in the "Attachment list" of the GOS menu nor is it stored on the content server. What we see instead in the "Attachment list" is a description of the Archive object (TOASP-objecttext) for all documents that we store.
NEED HELP
We need to have a document's name (i.e. name of the uploaded file) displayed in the "Attachment list" of GOS. We also need to be able to retrieve this file name programmatically via a function call or a class method.
Any help is greatly appreciated.
Gene.

1. In GOS attachment list i can able to see the attachment name (without extension) may be you need to check your layout using change layout (its may hidden)
2. For getting attachment name programatically try this way
i_object-typeid = 'BUS2012'.
i_object-catid = 'BO'.
i_object-instid = yatthdr-docno.       " Document Number
refresh : i_brel, i_link.
* Get Attachment List
append 'ATTA' to i_brel.
if not i_brel is initial.
    select *
      from srgbtbrel
      appending corresponding fields of table i_link
      for all entries in i_brel
      where
        instid_a eq i_object-instid and
        typeid_a eq i_object-typeid and
        catid_a eq i_object-catid and
        reltype eq i_brel-reltype.
endif.
wa_filter-send_info = ' '.
wa_filter-no_content = 'X'.
loop at i_link into ls_link.
    clear : wa_doc_data.
    wa_fol_cont-doc_id = ls_link-instid_b.
    call function 'SO_DOCUMENT_READ_API1'
      exporting
        document_id                = wa_fol_cont-doc_id
        filter                     = wa_filter
      importing
        object_header              = wa_obj_hdr
        document_data              = wa_doc_data
      exceptions
        document_id_not_exist      = 1
        operation_no_authorization = 2
        others                     = 3.
You can find the File Name in the WA_OBJ_HDR
a®

Recover deleted document from Oracle content server

Hi All,
I've deleted some of documents from oracle content server mistakenly. I am using oracle ucm11g.
I found that we have a feature called "Trash bin". Trash-bin used for recover the deleted document/folder but unluckily settings for "Trash Bin" is disabled in my UCM folder configuration.
Is there any other way to recover?
Please kindly help me on this. It's an urgent production issue, please.
Thanks for your great support in advance.

Is there any other way to recover?
Try to take a look at Repository Manager admin application: http://docs.oracle.com/cd/E21764_01/doc.1111/e10978/c03_repository.htm#DAFCGDIE
If you still can see your items there, you could recover the status.
If not, I'm afraid your documents are gone from UCM. In that case, you might recover them from a back-up. There is also a chance that documents are still present in the Vault directory, so rather than 'recover', you might 're-submit' them.

Attach doc from external content server- using Generic Object Service (GOS)

Dear All,
i have intergrated an external content server to SAP using SAP archive link. All the scanned document are there in Content server and corresponding entries are done in SAP.I can search and view document using tcode : OAAD
Please tell me steps for "how to attach a document from external content server using Generic Object Service "
Scenario is : For example when we change any Master records or create a new PO, or do some financial transaction then i need to attach the supporting document which is there in my content server connected to SAP.how do we manual attach a Document in SAP using GOS.
Do we need to do some special configuration to use GOS .please give the steps from initial.
Thanks
sandeep

Hello,
Check your configuration of document type assignement to required business document - object type, Archivelink table, content repository in OAC3 transaction.
Goto respective business document > Click on GOS > Create > Store business document - Here you can see defined document type with desctiption. Double click on this the assign your document to this business document. Save it.
This will help in attaching the document to your required business document.
To verify you can check the archivelink table or by transaction OAAD.
Hope this will help you.
-Thanks,
Ajay

Archiving DMS documents (DIR) into the content server

Hi Gurus
Please tell me the basic configuration for archiving the DMS documents. it is asking me to maintain the following table entries (TOAOM, TOAAR, TOACO and TOADV).
the requirement is to archive the DIR in to content repository and the procedure how to retrive it
Jai

Dear Jai,
to set up a Content Server please remember the following steps:
1) Content Server sizing with the hardware specification - Functional Consultant.
Content server sizing has to be done by functional consultant based on clients requirement related to different application files and their sizes for approx 1 year and based on this it has to be estimated to next 5 years if requried.
2) Preparing the Server - Basis
the content server sizing done based on inputs has to be given to basis for checking the hardware specification,server size and also the platform on which content server will be installed (Unix,Windows etc).
3) Creating Content Repositories - Functional Consultant with information of the server details from the Basis guy.
once content server is installed, it has to be configured by creating content repositories and categories by functional consultant with the help of Basis.
4) Creating Storage Category: Functional Consultant.
must be done by functional consultant with the help of Basis.
5) Configuring KPRO - Functional Consultant.
once content server is up, KPRO functionality also will start working but to direct files to content server instead of Sap Database, configuration in backend has to be done by Functional Consultant.
Best regards,
Christoph

Not to reguest classes from the codebase server if not found in archive?

i am not sure but i recall since 1.6 there is some applet tag parameter to switch off class/resource retrival from the codebase server after looking in the archive jar...
i.e. i do not want my browser to flood my www server with small reguests since the appled in fact does not need anything but the jar file content...
what is this parameter?

i've recovered it :)
<PARAM name="codebase_lookup" value="false">

Removing the Vertical scroll bar from the content area.

Hello,
Is there a way to remove the vertical scroll bar from the content area?
I am trying to create a new light portal frame work.
Everything works fine except that I see two vertical scroll bars, one from the content area and another from the page(frame).
Thanks in advance.
-Sudheer

Hi
There are a couple of ways in which to achieve this
1) Try and make the content flat. What I mean by this is that the content area (when using the standard light framework) doesn't contain an iframe, meaning that the iview defined on the page has "EMBEDDED" isolation mode. This should mean that you only have one scrollbar (if the content extends past the size of the browser)
2) If you need to make the iview URL isolation, then try and get the domain of the content to be of a similar domain to your portal server, i.e. your portal is portal.company.com and the content is content.company.com. In this way you can make the pages expand.
NOTE: One thing to note is that when using URL isolation iviews doesn't allow the automatic expanding of the iframe content. This is because the standard javascript doesn't allow this. Therefore you may have to write your own javascript function (or content area page) to do this
I hope this helps
Darrell

How to get the file on the content server via ABAP

Hi
We are working on an abap that should download certain files stored on the content server and store them on a different file location using GUI_DOWNLOAD. How can we retrieve the files (PDF's) via ABAP from the contentserver?
Hope someone can help
Cheers

Hi,
I think the DMS BAPIs could be useful here. For example you can use BAPI Document_CheckOutViewX or Document.CheckOutView2. You will find the documentation for these BAPIs in transaction BAPI under subtopic 'Cross-Application-Components'.
Further maybe the information in the SAP note 504692 and 796709 could be useful too.
Best regards,
Christoph

Assign specific metadata for folder structures in the Content Server

Assign specific metadata for folder structures in the Content Server
Hi to all,
I working with Oracle Content Server 10g and Desktop Integration Suite and I will like to know how can I restrict or enable some specific metadatas from the default metadata, for differents content folder. This is different from the function: Information Field Inherit Configuration.
tnks!

I am a bit unclear about your question:
- do you ask about metadata assigned to folders, or
- do you ask about metadata assigned to items in folders?
Starting from #2, if you forget about folders, there is standard functionality that you can use to restrict, enable, ... metadata for an item. Read this chapter: http://docs.oracle.com/cd/E21764_01/doc.1111/e10978/c04_metadata.htm#sthref288 to get full details.
I am not sure whether you can use anything of this functionality (profiles, option lists, etc.) when you check in a new folder. I doubt it, though. The logic of folders is slightly different - whilst e.g. profiles correspond to "content item", you don't find such a correspondence in folder's hierarchy (why a folder could not contain various content types, for instance?)
Last question is, from where you want to use this functionality - even for items. In 10g, Desktop Integration Suite's functionality was rather limited (often it was supposed that a user will just 'throw' an item to a folder, and metadata will be inherited from folders). You might have to upgrade your DIS to 11g; it should work even with 10g Content Server, but make sure you verify it before mass upgrade. In 11g, DIS should offer profiles, etc. with full capabilities.

FileName from the Content Server

Similar Messages

Maybe you are looking for