Files are one level too deep
I uploaded my files to my server but they didnt show. My
support guy said my files were one level too deep. How do I fix
this. email me if you would like the pic of how my files are set up
right now. The message below is what he sent me in regards to my
problem
Dear Rick Sepulveda,
It appears that your files are one level too deep. You can
see the site at
http://profusiondesigns.net/html/
but you want it to be
http://profusiondesigns.net/
so you need to move the files from /var/www/html/html/ up to
/var/www/html/ and then you'll be all set.
Your question was:
how do i upload my webpages
Reply from Jumpline.com, Inc. (Wed Nov-19-2008 23:44):
Here's a link to our support site that includes information
to get you started on this.
Customer comment (Thu Dec-04-2008 03:12):
I uploaded to my server but my new page wont display. There
were other files in there before i trasferred mine but i cant
delete them to start over. can you help. Attached is a pic of how
my files look when im connected to my server.
Thanks
Sincerely,
Jason Shaw
Jumpline.com, Inc. Support Team
What do you have in the Host Directory field of your Remote
Site Definition?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ricksepulveda" <[email protected]> wrote in
message
news:gh93gf$rso$[email protected]..
>I uploaded my files to my server but they didnt show. My
support guy said
>my
> files were one level too deep. How do I fix this. email
me if you would
> like
> the pic of how my files are set up right now. The
message below is what he
> sent
> me in regards to my problem
>
> Dear Rick Sepulveda,
>
> It appears that your files are one level too deep. You
can see the site at
>
http://profusiondesigns.net/html/
but you want it to be
>
http://profusiondesigns.net/
so you need to move the files from
> /var/www/html/html/ up to /var/www/html/ and then you'll
be all set.
>
> Your question was:
> how do i upload my webpages
>
> Reply from Jumpline.com, Inc. (Wed Nov-19-2008 23:44):
> Here's a link to our support site that includes
information to get you
> started
> on this.
>
> Customer comment (Thu Dec-04-2008 03:12):
> I uploaded to my server but my new page wont display.
There were other
> files
> in there before i trasferred mine but i cant delete them
to start over.
> can you
> help. Attached is a pic of how my files look when im
connected to my
> server.
> Thanks
>
> Sincerely,
> Jason Shaw
> Jumpline.com, Inc. Support Team
>
>
Similar Messages
-
In Indesign CS6 I export an artboard to TIFF with the sdk's funtion SnapshotUtilsEx->ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?
An easy example to prove this bug of Indesing CS6: I create a psd with Photoshop CS6, with width 505 pixels, height 317 pixels and a resolution of 300 pixels per inch. This psd is placed on a page in InDesign CS6. Then I try to export it as a tiff with the functions:
fSnapshotUtilsEx->Draw(flags,fullResolutionGraphics,greekBelowPtSize,enableAntiAliasing,tr ansparencyQuality,abortCheck,pVPAttrMap,bDrawNonPrintingObjects);
and
SnapshotUtilsEx-> ExportImageToTIFF (iStream)
The resulting tiff has a width of 506 pixels (one pixel more in width). It will happen the same if we start with a width of 507 pixels, etc.
This error does not occur with Indesign CS5, nor Indesing CC. -
Exported Files are ending up too Small and can't figure out why? Help please!
I'm Exporting files with no constraints - film scans (jpgs) starting at 10-12MB are exporting to 2MB-3MB files. RAW images are also exporting that small. I've tried at 240dpi and 300dpi with the same results. The original film scan jpgs are 8'x12" at 300dpi and they're ending up closer to 5"x8". Any suggestions?
BraedonF wrote:
the smart preview size was set at Medium and 5MB
You can't set smart preview size or quality (without a plugin) - it's fixed in Lightroom (e.g. size is 2560-).
The size/quality preference is for the "regular" (non-smart) previews.
BraedonF wrote:
After re-linking the files (no longer exporting from a smart preview), the file sizes when back to normal.
But you're right - if original is offline, and you therefore export a smart preview without resizing, it'll be 2560, not the full-rez of the original (unless original is smaller than 2560), and that'll account for over-small exports sometimes.. -
How to get script to save up one level
Here is my basic script so far:
if (activeDocument.width > activeDocument.height)
doAction("WalletName H_Right","X-Key Logos.atn");
else if (activeDocument.width < activeDocument.height)
doAction("WalletName V_Right","X-Key Logos.atn");
I want a script that will save my current edited Photoshop CS3 open document image (stored in a folder called Client/jpg) and save it into a Client/edit folder. In other words I want it to go up one level from the jpg folder to the Client folder then save into the "edit" folder that is in the Client folder.
I want it to save as Jpeg, Level 8.
In another script I use this to save the file as jpg level 12 into the same folder and append to the name:
var CurrentFolder = activeDocument.path;
saveFile = new File(CurrentFolder + "/" + imgName + "_" + "wal")
saveOptions = new JPEGSaveOptions();
saveOptions.embedColorProfile = true;
saveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
saveOptions.matte = MatteType.NONE;
saveOptions.quality = 12; //ranges from 0 to 12
AD.saveAs(saveFile, saveOptions, true,Extension.LOWERCASE);
But in this case I just want it to save with same name jpg but level 8 in a differnt folder. The Client/jpg folder will be different everytime. "Client" refers to the client's name so that folder is not always in the same location. So what snippet of code can be placed into the saveFile area to say go up one folder and save to "edit" folder with the open document's current name.Ok I am not sure where to put it. This is what I got so far now:
//Determint wether document is Horizontal or Vertical and run that action
if (activeDocument.width > activeDocument.height)
doAction("DigiPhoto H","X-Key Actions.atn");
else if (activeDocument.width < activeDocument.height)
doAction("DigiPhoto V","X-Key Actions.atn");
// Write file up one level into "digipics".
var CurrentFolder = activeDocument.path;
var parentFolder = decodeURI(activeDocument.path.parent);
$.writeln(parentFolder);
saveFile = new File(parentFolder/digipics, imgName)
saveOptions = new JPEGSaveOptions();
saveOptions.embedColorProfile = true;
saveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
saveOptions.matte = MatteType.NONE;
saveOptions.quality = 8; //ranges from 0 to 12
AD.saveAs(saveFile, saveOptions, true,Extension.LOWERCASE);
It does the first actions and saves but prompts for where and what size. What exactly does this need to look like so that it saves level 8, jpg without prompting and saves to the up one level folder as discussed earlier.
I have searched and can't find anything. -
Offline redolog file are delete in Oracle 11
Hi
We recently upgrade our Oracle release from Oracle 10.2.0.2 to Oracle Database 11g Release 2.
I was running the process to table compression with BRSPACE 7.20 using the command:
brspace -u / -p /oracle/LUK/112_64/dbs/reorgEXCL.tab -f tbreorg -a reorg -o SAPR3 -s PSAPLUK -t allsel -n PSAPLUKCOMP -c ctab u2013SCT
The process finish ok but I have a problem with Offline redolog, it are generated succesfully but it are delete after a short time, it disappear from the filesystem, I donot understand this behavior, the delete of archive log is not a deliberate configuration.
If I execute the archive log backup I allways obtain a lot of warnings with redolog file not found:
Offline redolog file '/oracle/XXX/saparch/XXXarch1_11155_666372933.dbf' not found
After compression process the Offline redologs files are being delete too.
I need to know the reason for this behavior, may be a wrong parameter in our database?
It is a normal situation with Oracle 11?
What happen with the Database and backup/restore strategy without offline redologs?
Next week I need to upgrade the oracle release in our productive system, in this system the archive and database backup are very important and I need to solve this issue or fix it.
Please help me to solve this problem.
Thanks in advanced,
OMMHi,
Offline redolog file '/oracle/XXX/saparch/XXXarch1_11155_666372933.dbf' not found
Such messages are only seen if some one has deleted/moved the complained offline redo log files form the Archive Log destination.
Please ensure that if someone has moved/deleted the offline redo log files or not ? It may be done to accommodate space in Archive log destination, as the reorganization/compression activities will generate more archive logs.
Also try to perform the same activity again and monitor the archive log destination directory. As i think, such "Offline redo log file deletion after Table Compressions activity done by BRSAPCE " behavior is not possible at all.
What happen with the Database and backup/restore strategy without offline redologs?
Offline Redo log files must require in Database media Recovery process. Without it only Point-in-time recovery is possible.
Regards,
Bhavik G. Shroff -
CS_WHERE_USED_MAT only returns one level
Hi all,
I need to get the results that CS15 (where-used) gives me when multi-level is checked.
I need to write a program and was hoping to use FM CS_WHERE_USED_MAT. However, this FM only returns the materials that are one level down. I'm on 4.5b.
Does anyone know what FM I can use that will give me the materials at all levels (like CS15 does). I can use CS_WHERE_USED_MAT and feed back in each material until I reach the end of the levels. But I was wondering if anyone has found a better way.
Thanks,
Mikeyou can refer link:[http://wiki.sdn.sap.com/wiki/display/Snippets/InverseBOMExplosion-ABAP]
or use fm CS_BOM_EXPL_MAT_V2 pass X to field MEHRS -
I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer. This happens with mp3 and mp4 and just wav files. Some audio are accepted, most are not. I get that codec is not installed error message, too.
Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps -
Reverse engineering sequence diagram with more than one level deep
Hello,
When I generate sequence diagram from a method with Java Studio Enterprise 8.1, it only shows the method called directly by this method.
Can I also show the methods that are called by the other methods that the one I'm generating the diagram from?
Thanks,
MikeHi Mike,
Sorry for the delay. The whole team has been busy with JavaONE for the past week.
We currently do not support reverse engineering of an operation to a sequence diagram more than one level deep. I opened an enhancement request for you:
http://www.netbeans.org/issues/show_bug.cgi?id=103780
The UML pack is now part of NetBeans. Check out these links for the latest info regarding UML:
http://www.netbeans.org/products/uml/
http://uml.netbeans.org/
Thanks,
George -
After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?
See Pondini's Transferring files from one User Account to another, for starters
-
In my Macbook Pro, the Finder folder has duplicate images in the 'all images' file. One image is small and the other is full size. First question is why do I have two of every image? Why is one small and the other large. Do I need two of everything? If not, which do I delete?
thanks, JeanHello fane,
Re: duplicate images in finder.
Nearly all images are JPG with a few GIF and PNG sprinkled in.
I opened the inspector so I do get info when opening each image, but it a slow process.
It seems that one image is around 70k while its twin can be up to 4Mb which is what comes unedited from my camera. Sometimes there will be 3 or 4 identical images in finder, but when I open iPhoto to see what ‘s really in the file, I find only one image, and it’s full sized.
Are all these extra images, even if they are aliases, taking up space on my drive? And should I delete them? The info bar says I have over 10,000 images, which is rather a lot for what I do.
I am unable to add the file size on the view menu as it is grayed out. Don’t know why it’s gray, but having that info on the screen would save a lot of time and fiddling with each image.
I am trying to resize selected pix so I can upload them to e-bay, which requires less than 70k. I have looked at resizing programs but most are for PC platform and not Mac, so I am trying to resize in the finder window under tools. Tedious at best. Any suggestions will be appreciated
Thanks for your help,
jeanfromwilsonville -
JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?
16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked? -
I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?
Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers -
I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file
From the Finder menu select 'Secure Empty Trash'. If this or the suggestion above doesn't resolve the problem take a look at the various suggestions in this link:
http://www.thexlab.com/faqs/trash.html -
I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkrSo am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck! -
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap
Maybe you are looking for
-
I can't send or receive Messages on my iPod touch
I have the latest software update. Any ideas why I can't send or receive message? It says not delivered each time I try to send a tes message to someone with an iPhone. Wi-Fi is on. What am I missing?
-
Sort in date order from Essbase cube source
Hi everyone, I have an Essbase cube which I'm displaying the data from in OBIEE. Within the cube one of the dimensions is a date ( set as a time dimension ). It has several generations: Gen2 - Year, 2010 Gen3 - Year/Quarter, 2010/Q1 Gen4 - Year/Month
-
Slideshow: Images very small on certain computers
Hi all I'm having a problem with slideshows created in (or updated to) iWeb '08. When viewed on some computers, the slideshow images are really small, just a tiny little bit bigger than the thumbnails on the page. On other machines, however, my slide
-
I have written program to see alv list. When i run the program it shows first field value in all fields in same row.I mean it looks like row1 : 1 1 1 1 1 row2 : 2 2 2 2 2 row3: 3 3 3 3 3 I am calling function to do list with this program : gd_repid =
-
This is a persistent repeat problem. I had this problem a week ago. A Linux savvy friend could not solve it, so we deleted and removed FF. That was a drastic solution, but solved the problem. I had Ad Block and No Script add ons. I thought No Script