Files not updating from default.dwt

NONE of my pages are updating from the template that I
created them from. To create them I did the following:
File>New>Templates>Site Name>Template
Name>Create...
Then I'd save the file to whatever I was creating..... such
as, index.htm
I have done this for 6 new pages....
Then I change the links on the template and have it and when
I'm asked if I want to update ALL of the pages that were created
based on that template I answer yes... (obviously)..
But.... the pages do NOT update. it even says so in the
"Update Pages Dialog Box". it says that NO Pages were updated?
Why is that and what possible cause could there be.
I have a Dreamweaver manual and have defined the site about a
dozen times (after removing it first) and I have dome so RIGHT TO
THE BOOK..... but the dang template will NOT update the sites pages
created from it........grrrr..........
Any suggestions? Thanks for any replies.....
HEK

Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done)
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"gramma_hek" <[email protected]> wrote in
message
news:[email protected]...
> NONE of my pages are updating from the template that I
created them from.
> To
> create them I did the following:
>
> File>New>Templates>Site Name>Template
Name>Create...
>
> Then I'd save the file to whatever I was creating.....
such as, index.htm
>
> I have done this for 6 new pages....
>
> Then I change the links on the template and have it and
when I'm asked if
> I
> want to update ALL of the pages that were created based
on that template I
> answer yes... (obviously)..
>
> But.... the pages do NOT update. it even says so in the
"Update Pages
> Dialog
> Box". it says that NO Pages were updated?
>
> Why is that and what possible cause could there be.
>
> I have a Dreamweaver manual and have defined the site
about a dozen times
> (after removing it first) and I have dome so RIGHT TO
THE BOOK..... but
> the
> dang template will NOT update the sites pages created
from
> it........grrrr..........
>
> Any suggestions? Thanks for any replies.....
>
> HEK
>
>
>
>
>
>

Similar Messages

  • Lync 2013 Photos will not update from AD

    I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs;  Replicate this attribute to the Global
    Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
    "Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"  
    and finally we are setting the photo in ad using:
    "Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
    The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
    also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
    EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
    do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

    Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
    What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
    this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
    it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
    but unfortunately no change on my Client. I still see these users original photos.
    Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
    the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
    We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
    More info on the environment:
    4 main sites + remote users
    ~7DC's - 2003 DFL (1 at each site + a few at HQ)
    3 Lync Front end servers (2013) (All located at central HQ)
    2 Lync edge server (2013) (All located at central HQ)
    1 - 2010 Exchange server (Located at central HQ)
    2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
    About 100 HP 4110 Lync Edition Desk phones
    Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

  • Incopy files not updating

    Having a problem with Incopy files not updating after designers on Indesign prepare packages on second round of revisions.
    First, the designers create an Indesign file and prepare a newly created Incopy package. The editors are able to open the package for the first time. Editors make changes then repackage for designers. Designer then open package from editors and make necessary changes and then repackage back to the editors. At this point, the editors receive a message to replace when opening package. The files open but it doesn't update all the changes that was originally made to it. It as if it is still using the original assignments from the first newly created package. Also, all the assignments have "?" in the assignment window in Incopy. We are unable to figure out how to update the "?" in Incopy or relink or what ever we need to do at this point.
    Several things we checked.
    1. Unstuffing the package contents from the designers shows all updated file dates. So we know the package contains the newest updated assignment files.
    2. If the designers rename the file names on all the assignments in the assignment folder, then repackage. The files open on Incopy with updated changes. But not if the file name remains the same. Also, if the assignment files are all renamed, it doesn't ask to replace anything on Incopy.
    At this point. Our only solution is to rename all the assignment files and repackage. But we shouldn't have to be doing this, especially since it adds time to the designers to repackage the files.
    Designers using Indesign CS 3 on Mac OS 10.6.4.
    Editors using Incopy CS 3 on PC Windows.
    Any help would be greatly appreciated.

    When the InCopy user opens the assignment package for the first time, it unpacks (it's really like a .zip file) into a folder on their hard drive called InCopy Assignments. The folder is located in My Documents on a PC and in the Home > Documents folder on a Mac.
    Every unpacked InCopy assignment package goes into a subfolder within this InCopy Assignments parent folder. Each package's folder is named after the *assignment* name (not the name of the package itself, which is usually the same but not always). So if the assignment name is Chapter1.inca, then the subfolder name will be Chapter1.
    When the InCopy user repackages it for the designer, it packages a *copy* of this subfolder. This is the subfolder that Bob is suggesting they delete, after sending off the packaged InDesign file. That's a good idea.
    If you can't rely on your editors to do that ... many are very leery of throwing anything away ... then your designers should *rename the assignment* in their Assignments panel before creating an InCopy package for the second or third or whatever time. They can just double-click the assignment in the panel, the Assignment Options dialog box opens, and they can change the name from say "Chapter1" to "Chapter1-v2". They click okay, they choose Package for InCopy, and send it off.
    When the editor gets this file and double-clicks it, it unpacks into a different subfolder than before: Chapter1-v2, leaving the Chapter1 subfolder intact. So you avoid the prob of duplicate assignments on the InCopy user's hard drive.
    FWIW this was much more of a glitch with CS3. Not sure what Adobe did differently, but assignment packages are much more intelligent in CS4 and CS5.
    AM

  • CC Photoshop not updating from 14.0 to 14.2.1

    Hi All,
    I'm having an issue where my CC Photoshop will not update from version 14.0 to 14.2.1.  I've signed out, uninstalled the Creative Cloud desktop app and re-installed it, but the issue persists.  I also uninstalled and re-installed CC Photoshop and it still downloaded and installed the other version.  Can anyone help point me in the right direction with what to do next?
    Thanks!; trouble

    Moving this discussion to the Creative Cloud Download & Install forum.
    Rocketscience I would recommend reviewing the installation log for the update to determine why it is failing.  You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

  • FCS Not Updating from WSUS / Cannot open MOM Console / Cannot connect to MOM DB

    Hi,
    My original problem was that FCS was not updating from WSUS. Then after reading up, and trying a whole lot of different things I managed to break it further. Now I cannot open the Microsoft Forefront Client Security Console on the management server, The
    Administrator Console and the Operator Console cannot connect to the Management server (They are on the management server)
    As a side note: The reporting hasn't worked at all, not even after the last Systems Admin reloaded the whole FCS implementation.
    I need assistance to get everything working again, and I think it might take a while to get everything resolved.
    I don't know what information to provide so here is some to start with:
    I believe this is a on server topology:
    1. There is the management server, with all the roles except the "distribution" role installed.
    2. The updates to FCS are set to go through our WSUS server.
    3. The WSUS server works fine in all regards except to push the FCS updates through (I release other MS updates every week and they all go through)
    4. Management server is 32-bit Windows Server 2008 Standard with SP1, with Microsoft Operations Manager 2005 (Unsure of SP1 is installed, but I think it is), and Microsoft SQL Server 2005 (It doesn't have the SQL Studio thing)
    5. I have domain admin credentials
    6. When opening the Microsoft Forefront Client Security console it crashes with a "MMC has detected an error in a snap-in and will unload it". Clicking on ok gives a new error page of exception: "System.Reflection.TargetInvocationException"
    7. Opening the Operator console give a message of "Error connecting to server" and clicking on ok brings up the console settings where you specify the MOM management server etc
    8. Opening the Administrator conolse immediately brings up the "Connect to a different MOM Management Server" window.
    I am hoping that someone here can ask the right questions and helped get through all these issues to get this system working again

    Thanks Quan and Faron for your replies. Firstly, when I logged into the server today and tried to open the consoles, the FCS console did not give me an error. Before I originally posted my message I already downloaded and tried that hotfix. The problem is
    there is no SQL Management Studio. Microsoft SQL Server 2005 is installed.
    The only error that really stands out is this one under the application logs:
    Source: Microsoft Operations Manager
    Event ID: 20607
    The Data Access Server (DAS) on computer SSCIS04 returned an error. System error code: -2147217770 System error text: IDispatch error #3222 DAS method called: ConfigurationGetOnePointFreeSpace Called from file: d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp
    Called from line: 984 Other than that there are some terminal server printer errors and print spooler errors (which are common on pretty much all our servers), and Heartbeat errors (Event ID: 21213: Heartbeat update failed for 1 or fewer agents. Error details:
    IDispatch error #3222)
    I have just checked again and the FCS console is still opening without error. And I can start a scan. (No clients report back to the server though)

  • Delta records not updating from DSO to CUBE in BI 7

    Hi Experts,
    Delta records not updating from DSO to CUBE
    in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
    I cheked in Change log table in DSO its have 5 records
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -  -1
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
    ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
    but active data table have one record - 0
    how to corrcct the delta load??
    Regards,
    Jai

    Hi,
    I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
    Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
    The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
    The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
    Is this not what you see in the cube? were the earlier req deleted from the cube?

  • After I sync with iTunes my iPad Calendar is not updated from my computer where I keep my dates on Abacus. It used to do this. What's wrong?

    After I snync with iTunes my iPad Calendar is not updated from my computer where I keep my dates in Abacus. It used to do this.

    Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

  • I used the utility, MozBackup.exe, to create: Firefox___.pcv and Thunderbird___.pcv. How do I import or use these files to update from AutoCADGuru to ProCADGuru

    Firefox Team,
    I used the utility, MozBackup.exe, to create:
    Firefox 3.6 (en-US) – 2013-02-10.pcv
    Thunderbird 13.0.1 (en-US) – 2013-02-10.pcv
    How do I import or use these files to update from AutoCADGuru to ProCADGuru?
    Thanks in Advance,
    Kenny

    You are giving conflicting information
    Your question started with "How do I import or use these files to update from AutoCADGuru to ProCADGuru? "
    Then you said:
    "Autodesk's legal department threatened me with a law suit, because my domain name had “AutoCAD in it. So I change it to ProCADGuru. I created” Firefox 3.6 (en-US) – 2013-02-10.pcv and Thunderbird 13.0.1 (en-US) – 2013-02-10.pcv to back everything up. Now I need to know how to use them to restore all of that saved data and update it to my new domain. "
    Then you said:
    "How do I import or use these files to update from www.AutoCADGuru.com to www.ProCADGuru.com?"
    So all that you have explained so far has been about closing down one webhost and moving to another, which has nothing to do with Firefox or Thunderbird.
    Then today you say:
    "I need to know how to use these to restore all of my Address books, email books, sent, saved, and settings for both Firefox and Thunderbird. "
    What is the problem you are trying to solve here? is this about transferring Email settings in Thunderbird, Bookmarks in Firefox, moving a website from one host to another, or something totally different?

  • IPad 2 will not update from version 4.3.5 (8L1).

    I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

    Naalamc wrote:
    It's an ASUS, Windows 8, Version 11.1.3.8
    Thank you.
    Your iPad has iOS 4... See Here >  http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • I have some mp3 files not purchased from itunes on my ipod nano; recently got a new laptop - how can i transfer now those mp3 to itunes?

    i try to transfer mp3 files; not purchased from itunes, from my ipod nano to my new laptop/itunes/itouch. i dont have the original files/cd;s anymore and no backup! can somebody help please

    http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer

  • I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
    /Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
    Now launch InDesign and see if the problems are resolved.
    If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
    Let me know if any of these suggestions work for you
    I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

  • My contacts are not updating from the iCloud. How can I actively go and retrieve them?

    My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?

    Hello there, Lk354.
    The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
    Get help using iCloud Contacts
    http://support.apple.com/kb/TS3998
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Status is not updated from delivery to sales order item.

    Dear Folks,
    One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
    Thanks & Regards,
    murali.

    Dear Murali,
    Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
    I hope it will help you,
    Regards,
    Murali.

  • HT201210 My ipod touch 2 gen will not update from IOS 4.2.1

    My Ipod 2Gen will not update from IOS 4.2.1 keeps saying this is the most up to date software. Does the 2 Gen Ipod not allow anything higher than 4.2.1. HELP PLEASE!!!!

    iOS 4.2.1 is the highest supported iOS version for the iPod Touch 2nd Generation.

  • My iPhone will not update from version 4.1

    My iPhone will not update from version 4.1, everytime I try to update on the iTunes iPhone screen, the response says "your iTunes version is current"....I am not trying to update iTunes, I just want to update my iPhone. How do I fix this?

    You must purchase 10.5.8 from an Apple store, either in person or online. You can also update to 10.6.8 (Snow Leopard) if you have an Intel Mac. The current version is Lion, (10.7), but you must have Snow Leopard installed to upgrade to Lion. You also need an Intel Mac.

Maybe you are looking for

  • Hyperlink issue

    Hi All, I tried creating a hyperlink between 2 reports and pass parameters to other report. Below is error I get when we click on the Hyperlink ( Details text ), Please advise. Main Report, Detail Report. From Main Report , I am passing 3 parameters.

  • My Ctrl   up/down arrow stopped working in Dreamweaver.

    Hey everyone, I was hoping someone would be able to help me resolve this issue because I feel like I accidentally clicked something. I'm so use to going up and down paragraphs that it has become a hinder to me when I'm programming now. If anyone coul

  • Add server to domain

    I had 2 Servers setup on a domain. Both running server 2008 OS. One functions as the controller of the domain, let's call that the new server. And the other server functions as a backup, call that the old server. Everything was working fine and I cou

  • Plug ins location Photoshop cc

    Into which folder do I install all my plug-in filters?  ex. NiK?

  • Import MPEG from Kodak EasyShare

    My wife has a Kodak EasyShare Z700. We recently used it to make some short MPEG clips. iPhoto 4 doesn't seem to import them. In addition, when we connect the camera to the computer it doesn't appear as a USB-mounted disk so I can't rummage around loo