Fileserver randomly gets dirty bit set

Hello,
Recently the events below started showing up in the eventlog our DFS-R enabled fileservers.
Event ID 55:
Source: Ntfs
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume Fileserver-D.
And:
Event ID 26: Application popup
Application popup: Windows - Corrupt File : Exception Processing Message 0xc0000102 Parameters 0x000007FEFD29718C 0x000007FEFD29718C 0x000007FEFD29718C 0x000007FEFD29718C
I've found several articles/threads (most of them from a while ago). One of them had a link to a Microsoft fix. But when trying to install those, they appeared not applicable.
Is there any way we can make these events provide more verbose information. The events here only show there is a problem. Not which proces, executable or file potentially caused the application popup and result in getting the dirty bit set.
The parameters with large hex numbers mean nothing to me. Can they be translated to anything useful in human language? Right now there's nothing to go on in terms of finding the cause/culprit.

Hi,
Which operating system is installed on the server? Event ID 55 has alerted you to the fact that there is corruption on the volume, and the only tool capable of resolving the file system corruption is CHKDSK. Try to run “chkdsk /f /r” to check and fix the volume.
For more detailed information, you could refer to the article below:
EVENT ID 55: When Good Bits Go Bad
http://blogs.technet.com/b/askcore/archive/2012/05/09/event-id-55-when-good-bits-go-bad.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • When firefox starts up, the windows xp c drive 'dirty' bit gets set forcing a 'chkdsk' on reboot. How fix?

    when firefox 5.0.1 starts up, it sets the windows c drive dirty bit on and the next time the computer reboots it causes a 'chkdsk'-annoying. I've checked this and seen it happening using 'fsutil dirty query c:' and it's off before firefox starts and on afterwards. I can even turn it off diddling with the, for example, add-ons option and disabling/enabling an add-on like zoom-in for instance.
    How fix?

    Update your video drivers. Your system details shows you to be running drivers dated 11-11-2005 which are too old to run Firefox efficiently.
    You can update to the current version which is 275.33 by dowloading from http://www.nvidia.com
    Remove the existing drivers via Add/Remove Programs first.
    If this suggestion fixes the problem for you, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same subject.
    Thanks.

  • LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

    LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

    Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

  • Help!!! How do I get the bit color depth the user has his screen set to?

    Help!!! How do I get the bit color depth the user has his screen set to?
    Thank you.

    i'm not sure if it's what you 're looking for but it worked for me:
    GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
    GraphicsDevice[] gs = ge.getScreenDevices();
    for(int i=0;i<gs.length;i++){ //length is 1 (= i have only one screen? )
    GraphicsDevice g=gs[ i ];
    int nBits=g.getDisplayMode().getBitDepth(); //method getDisplayMode() only in jdk1.4 , i think
    System.out.println( nBits+"");
    output is 32 if i set my screen color to 32bits, 24 if...24, ...

  • SPA942 randomly getting set on Calls Forwarded

    I have 8 SPA942 and 2 SPA504G Linksys/Cisco IP phones on a freePBX phone system and they randomly get set to Calls Forwarded and the phones randomly get locked where it asks for a password to access call log etc.  I reset the phones to default reset all settings and the phones work, but still these issues come up, with or without a password being set on the phones, using firmware 6.1.5a on the SPA942 phones.
    I have setup the phone system a second time from scratch and still this issue comes up.  I cannot find any reason why the phones would randomly get set to calls forwarded, nor can I find any evidence that someone is logging into the phones and setting or changing the password.  
    Don't know where to go from here?
    Sincerely,
    Matt Wyckoff

    Turn on syslog & debug and catch all the messages sent from the phone (or all phones). It will help you with the further analysis.

  • Can't get LUA Patching set to enabled

    Hey all,
    I've been following the following guides to get Standard Users to get update sautomatically without UAC prompts. Using these links...
    Initial Start...http://www.grouppolicy.biz/2010/06/updated-how-to-make-adobe-reader-more-secure-using-grou p-policy/comment-page-4/#comments
    Troubleshooting...
    http://forums.adobe.com/message/3865517
    http://forums.adobe.com/thread/960756?start=0&tstart=0
    I have Reader 11.0.0 being deployed via GPO and have created a MST file to silently install and Accept the EULA
    Test GPO to set iCheckReader to 3 for 32 bit HKLM\Software\Adobe\Adobe ARM\1.0\ARM and 64 bit HKLM\Software\Wow6432Node\Adobe\Adobe ARM\1.0\ARM and set iLogLevel to 1
    I verified that the enableLUA exists and is set to 1 under HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
    Here's my log
    [2013-06-05 11:31:41] Adobe ARM 1.7.0.0 logging started.
    [2013-06-05 11:31:41] Command Line:
    [2013-06-05 11:31:41] FindCurrentPDFOwner...
    [2013-06-05 11:31:41] .pdf value: AcroExch.Document.11
    [2013-06-05 11:31:41] GetFileVersion(): C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
    [2013-06-05 11:31:41] File version: 11.0.0.379
    [2013-06-05 11:31:41] ProductCode: {AC76BA86-7AD7-1033-7B44-AB0000000001}
    [2013-06-05 11:31:41] ProductName: Adobe Reader XI
    [2013-06-05 11:31:41] ProductVersion: 11.0.00
    [2013-06-05 11:31:41] ProductUACPatching: disabled  /* <--- I can't get this set to enable */
    [2013-06-05 11:31:41] Product UI Language: ENU
    [2013-06-05 11:31:41] ProductLanguage installed: 1033
    [2013-06-05 11:31:41] ProductRegistry: SOFTWARE\Adobe\Acrobat Reader\11.0
    [2013-06-05 11:31:41] ProductInstallDir: C:\Program Files (x86)\Adobe\Reader 11.0\
    [2013-06-05 11:31:41] InitUIStrings...
    [2013-06-05 11:31:41] InitListener...
    [2013-06-05 11:31:41] Init...
    [2013-06-05 11:31:41] Notify...
    [2013-06-05 11:31:41] Could not find ARM server to notify
    [2013-06-05 11:31:41]    GetLastError(): 2 - The system cannot find the file specified.
    [2013-06-05 11:31:41] StartServer...
    [2013-06-05 11:31:41] IsVistaOrLater returns 1
    [2013-06-05 11:31:41] ARM Server started
    [2013-06-05 11:31:41] Action added: Listener
    [2013-06-05 11:31:41] RunAutomatic...
    [2013-06-05 11:31:41] Launched: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\Reader_sl.exe
    [2013-06-05 11:31:41] CanStart...
    [2013-06-05 11:31:41] IsEULA_Accepted...
    [2013-06-05 11:31:41] EULA accepted from 1
    [2013-06-05 11:31:41] IsPatchingDisabled...
    [2013-06-05 11:31:41] UAC is enabled
    [2013-06-05 11:31:41] Admin User, IsElevated returns 1
    [2013-06-05 11:31:41] GetPreferences...
    [2013-06-05 11:31:41] Using found registered preference AUTO_ALL
    [2013-06-05 11:31:41] IsTimeElapsed...
    [2013-06-05 11:31:41] Minutes elapsed: 18
    [2013-06-05 11:31:41] Time elapsed is less than time limit - returning 0
    [2013-06-05 11:31:41]    Error Code: 120300
    [2013-06-05 11:31:41] SwitchToOtherProduct...
    [2013-06-05 11:31:41] SwitchToOtherProduct retuns 0
    [2013-06-05 11:31:41] Notify...
    [2013-06-05 11:31:41] WriteFile succeeded in Notify
    [2013-06-05 11:31:41] Requested to stop listener
    [2013-06-05 11:31:41] Confirming request to stop listener
    [2013-06-05 11:31:41] Action deleted: Listener
    At a point before is I had the same log as techhit1 in the second troubleshooting link, Which seems that the ARM updater needed to be updated from 1.7.0 to 1.7.4.. but didn't want to go any further without first getting the LUAPatching set to enabled..
    I feel even if i manage to get it set to enable I'll still be having the same issues as techhit1, and will still be stuck on implementing this, and instead have to just add the updated msp files to my deployed GPO.
    But how do I get this LUAPatching set to enabled???!!?

    Any thoughts? I was able to write a batch script that silently install the 11.0.03 msp file so that user are updated with prompting a UAC, however i don't want to have to write a new script everytime adobe comes out with an update, I'm sure future updates will installs like the orignal guide states it should once I get the UACPacthing enabled.
    Since the script installed the latest reader update it also updated ARM to 1.7.4 which should make future auto updates work fine unless theres another update for the updater... uhhh
    bump bump

  • TS3212 how to get 64 bit itunes on windows

    how to get 64 BIT TUNES ON WINDOWS

    lo**** wrote:
    My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client. The env/reg variables probably do exist/show, only in the right place. In Win 64-bit, there's a separate branch of reg entries for 32-bit (look for WoW6432Node).
    >
    ... whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
    ORA-12560: TNS:protocol adapter errorIt works as expected. Since there is no Oracle instance in the Client home (no surprise), you can't connect "locally" from the 32-bit sqlplus. I.e. you need to use "...@connectident" in the connect string.
    In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 toOn Windows platform, ORACLE_HOME should not be set by user (it is already set by installer, in the Registry).
    To pick up proper settings, PATH need to be set or used.
    >
    Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?Please remove OH from env system settings.
    Multiple homes on Windows is often a source of problems, since extra consideration and setup is needed more than just installing the software.
    If "Cognos" relies on system PATH, then one way to go might be:
    - put path to 32-bit Client bin folder first in PATH
    - set up a shortcut to command window with only 64-bit in PATH, for times when you need to administer the database via command line.

  • How to get the record set into array?

    Hi,
    I want to get the record set into array in the procedure and do the processing of the array later in procedure.
    below is the stored procedure i am working on:
    procedure bulk_delete_group(p_group_id in Array_GroupListID) as
    begin
    for i in p_group_id.first..p_group_id.last loop
    --Here I have to get the list of user id before deleting group
    SELECT user_id into *<SOME ARRAY>* FROM group_members WHERE group_id = p_group_id(i);
    DELETE group WHERE group_id = p_group_id(i);
    --Process the user id array after group deletion..
    end loop;
    end bulk_delete_group;
    Thanks in advance
    Aditya

    Something like this ->
    satyaki>
    satyaki>select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
    PL/SQL Release 10.2.0.3.0 - Production
    CORE    10.2.0.3.0      Production
    TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    Elapsed: 00:00:00.20
    satyaki>
    satyaki>
    satyaki>select * from emp;
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
          9999 SATYAKI    SLS             7698 02-NOV-08      55000       3455         10
          7777 SOURAV     SLS                  14-SEP-08      45000       3400         10
          7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
          7566 JONES      MANAGER         7839 02-APR-81       2975                    20
          7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
          7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
          7782 CLARK      MANAGER         7839 09-JUN-81       4450                    10
          7788 SCOTT      ANALYST         7566 19-APR-87       3000                    20
          7839 KING       PRESIDENT            17-NOV-81       7000                    10
          7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
          7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
          7900 JAMES      CLERK           7698 03-DEC-81        950                    30
          7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
    13 rows selected.
    Elapsed: 00:00:02.37
    satyaki>
    satyaki>create type np is table of number;
      2  /
    Type created.
    Elapsed: 00:00:03.32
    satyaki>
    satyaki>Create or Replace Procedure myProc(myArray np)
      2  is
      3    i   number(10);  
      4    rec emp%rowtype;  
      5  Begin  
      6    for i in 1..myArray.count
      7    loop  
      8      select *  
      9      into rec 
    10      from emp 
    11      where empno = myArray(i); 
    12     
    13      dbms_output.put_line('Employee No:'||rec.empno||' Name:'||rec.ename); 
    14    end loop; 
    15  End myProc;
    16  /
    Procedure created.
    Elapsed: 00:00:00.88
    satyaki>
    satyaki>
    satyaki>declare
      2    v np:=np(9999,7777);  
      3  begin  
      4    myProc(v);  
      5  end;
      6  /
    Employee No:9999 Name:SATYAKI
    Employee No:7777 Name:SOURAV
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:00.30
    satyaki>Regards.
    Satyaki De.

  • Need VB script or Batch file to query Dirty bit

    Hi Friends,
    Could anybody help me in setting up a script which can query Dirty bit on all volumes of 50 servers ?
    Thanks

    Mike / JRV,
    With your help, I could make a script which can find the local drives in a server. But i am blocked to proceed with dirty bit check on those local drives.
    Iam trying my level to find it out :)
    Thanks
    Arun
    You didn't look in the Repository did you?  You also didn't try the code posted above.  We cannot do this for you or would you like someone to remote into your system and do the typing?                     
    fsutil dirty query C:
    ¯\_(ツ)_/¯

  • External route with Down Bit set by CE router

    I have a question regarding the Down Bit. All the documentation I see concentrates on the redistribution of the MP-BGP into OSPF but I want to know more about the OSPF redistribution into MP-BGP. I think the rule is different for Type3 and Type5 LSAs.
    Lets say the CE redistributes a RIP route into OSPF, creating an LSA Type 5 route sent to the PE router - with the Down Bit set.
    Will this PE router redistribute this route into MP-BGP?
    I know that LSA Type 3 summary routes will not be redistributed into MP-BGP if the Down Bit is set but I am wondering about external OSPF routes with the Down Bit set????
    I am assuming that redistribution of RIP into OSPF at the CE does infact set this Down Bit before passing on to the PE router?

    How can step 2 in the sequence description say that PE2-AS1 receives an OSPF route with the Down Bit already set? This comes from the CE.
    I find this all very confusing when I check out these sequences - I thought only the PE router assigns Down Bit to LSA Type 3 routes?
    All the other references I see show how PE1-AS1 would normally set the Down Bit as it is redistributed back into OSPF?
    Thanks for your help - I feel I am getting closer. It is just this second step that is throwing me!
    Cheers
    Walter

  • TSP: Generating N unique random indices in tricky set

    Hi! I'm working on a type of the euclidian travelling salesman problem, and I'm going to try to solve it using an Genetic Algorithm.
    One solution may be a route like this: 1-2-4-3-7-6-5. This means travel from town 1 to 2 etc up to city number 5 and also implies travelling
    back to town 1 after town 5. Since the distances between cities are symmetrical, the above given solution is equal to the solution
    1-5-6-7-3-2 (since the route 1-2-4-3-7-6-5-1 is equal (in travelling distance) to 1-5-6-7-3-4-2-1 due to symmetry).
    I need to create an initial population of N solutions. These need to be unique, preferrably totally random solutions in the set of possible
    solutions (wich is this case does not consist of all possible permutations!). Is there a way of doing this without running the risk of
    getting stuck in a loop (generating the same solutions many times and retrying)? I don't want to risk this, since speed is an issue.
    I've thought about ranking solutions and unranking them, but this involves computing faculties, and that may be very time consuming
    and does not seem to be the optimal solution, although i've seen some implementations running in time complexity O(N).
    Note: the number of cities may vary.
    Any thoughts?
    Regards
    Alex

    Generating a random order of indices is not that difficult.
    int[] arr = new int[n];
    for (int i = 0; i < n; i++)
        arr[i] = i;
    for (int i = 0; i < n; i++) {
         int k = (int) (Math.random() * n);
         int x = arr[k];
         arr[k] = arr;
    arr[i] = x;
    However, when dealing with a graph this approach probably doesn't
    make that much sense, since it's unlikely there is an edge between
    every node.
    You probably want to generate an initial population where sequential
    indices are adjacent nodes.
    An alternative to GA is to determine the minimum spanning tree, and
    traverse that. The MST appoach is within a factor of 2 of optimal. If
    you're stuck on GA for this problem, then I think the hardest part is to
    determine a good appoach for combining two solutions.

  • How to run 'Get-AssignedAccess' or 'Set-AssignedAccess' power shell commands in c# Application

    Hi,
    I have console application using which i am trying to run power shell command  like 'Get-AssignedAccess' or 'Set-AssignedAccess'.
    i am using below code for this it is throwing exception 'Get-AssignedAccess' doesn't exist in cmdlet which is correct because these commands belongs to function category.
    using (PowerShell pwInstance = PowerShell.Create())
                            pwInstance .AddScript("Get-AssignedAccess");
                            var result = pwInstance .Invoke();
    How can we execute this kind of command using c#?
    Thanks,

    Hi prakashlight,
    Thank you for comming back and tell us the result. For more information about how to run PowerShell script in C# language, you can refer to this blogpost here:
    Executing PowerShell scripts from C#
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    Make an appointment at the genius bar and get the phone replaced.

  • After restoring my ipad from itunes, I can't get past the set up screen

    How do I get past the set up screen after restoring a new iPad 2 from an iTunes backup.  I'd like to sync my apps on my iTunes to my iPad.

    What setup screen? I have restored from a backup several times and the iPad always syncs when the process is complete. What are you seeing on the setup screen?

  • Been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft? Help me please.. getting a bit bored?

    been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?

    i have this problem too
    my dad thinks its because itunes is getting overloaded

Maybe you are looking for