FileVault and the 10.7.2 upgrade (or any restore, too)

My first Mac (mid-2011 MBA).
I did a (network) restore after the 10.7.2 upgrade, because it was taking so long (and I killed it). Then after the restore everything was looking good except after the login screen the spinny just keeps going, no desktop yet.
Could this be because I use FileVault, and I just need to wait it out until my desktop finally appears (is it encrypting the disk again?) It has been over an hour since I logged into the (restored) machine.

Fellas,
Just to rule out the obvious: are you using a non-US keyboard? Do you have y's and z's in your password (or any other special characters)? So you might just have hit the following problem:
http://hymnos.existenz.ch/2011/10/13/probleme-bei-der-passworteingabe-nach-updat e-von-mac-os-x-lion-mit-aktivierter-festplattenverschlusselung/
This page is in german, but roughly speaking it boils down to OS X not being able do detect the keyboard layout in the login screen (naturally, because the disk is still encrypted at that point) and defaults to US-keyboard layout.
And apparently you don't see the keyboard layout anymore in the 10.7.2 login screen. So just enter your password as if it was a US-keyboard and see whether that makes a difference.
Cheers

Similar Messages

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

Dear Katty,
Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
https://discussions.apple.com/thread/3374419?start=0&tstart=0
https://discussions.apple.com/message/16628399#16628399
Do you have an idea of how can I solve this problem?
Thank you very much again.
Best regards,
Alfonso

Snow Leopard 10.6.3 upgrade issues.. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?

I've tried to upgrade to Snow Leopard 10.6.3. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?

Are you booting from the retail disc to do the installation, or running it while booted from Macintosh HD?
It should work either way, but it doesn't always work when booted from Macintosh HD. The system files are supposed to be moved into place during the restart (while the HD is unmounted) making for a long restart time which sometimes causes people to think somethings wrong and abort it. Which is a bad move.
If you're booting from the retail disc it's less obvious what the problem may be; however if you've tried it from booted from the HD and it's failed, then tried booting from the disc, it will fail again because the system components are already on the HD in a disc image waiting to be moved into place.
Whichever way you were tryig, I'd try downloading OmnDiskSweeper (it's free) and using it to see if there's a large package (around 7-10 GB) lurking somewhere that may contain the installer files. If you do, you'll need to trash that before the installer will see a 'clean' system again.
It's also worth asking how much free space you have on your HD - if there's not enough for the installer to use for the temporary package or dmg, it'll fail.
Was there no warning dialogue after the unsuccessful install?
Message was edited by: noondaywitch ; link added

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

I am trying to open iBook on my iPhone 5s with iOS 8.2, iBook closes. I have tried restarting iBook, and the phone, but it still happens, any suggestions?

I am trying to open iBook on my iPhone 5s with iOS 8.2, when it opens I have a white screen for a few minutes, then iBook closes. I have tried restarting iBook, and the phone, but it still happens, any suggestions?

do a reset: hold the power and home buttons simultaneously until the Apple logo appears.

I have a Mac Air. When I go to view any video online (youtube for example)and click on a video, I get the space where the video should play but there is just a black screen and no play button and the video does not start. Any ideas?

I have a Mac Air. When I go to view video online (youtube for example), the screen for the video comes up with a black square space where the video should play. But there is no pay button and the vidoe never starts playing. Any suggestions would be appreciated.

Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

I downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm

i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi i try all the ways to turn it on but it didnt sucsses

roaminggnome
thanks for helping but i didnt know that is the downgrade is forbidden and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>>

I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock. Looked in applications and the mail application is missing. Any thoughts?

I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock. Looked in applications and the mail application is missing. Any thoughts?

Thanks Paul; but, taking your suggestion didn't solve the problem. As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS. I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock. Thanks again for trying.

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Th

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks

Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.

HT201210 my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored.

my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?

it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.

Thereis no sound on my macbook air. I have checked the volume and mute controls and the internal speaker are selected. any one any ideas please.

there is no sound on my macbook air. I have checked the volume and mute controls and the internal speaker are selected. any one any ideas please.

Hopefully one of these steps should solve the problem.
1. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
Best.

Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?, Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?

Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?, Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?

I did this several times.... not help. If I run win8.1 safe mode the Itunes stars and mentioned that video and sound driver not fit for them. After this I downgrade the driver to Win7---> not helped after this I update driver to latest--> not helped....
This is the situation right now.

I updated by 4S phone and the keyboard is responding very slowly - any advice?

I updated by 4S phone and the keyboard is responding very slowly - any advice?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

ITunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more

iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
can you please help, as I also tried to re-install it but pr

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

I recently updated my iphone 4s for verizon. Its the newest update..anyways it ran through the processs of updating and then told me to plug it into my computer. I did and the only option i got was to restore my iphone

I recently updated my iphone 4s for verizon. Its the newest update..anyways it ran through the processs of updating and then told me to plug it into my computer. I did and the only option i got was to restore my iphone. I did and on my iphone the bar loaded to about 75% and stopped. My computer came up with an error. It said it was unavailable to restore this is iphone and unknown error occured. I tried using a different cord different usb slot checked my computer software updated my itunes but the same effect happened. I am getting very worried that my iphone is going to go in the trash soon. Can anyone help with annoying problem.

Hello the_problematic_iphone
Check out the article below if you are not able to restore your iPhone.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

FileVault and the 10.7.2 upgrade (or any restore, too)

Similar Messages

Maybe you are looking for