Fill a entry in cluster in each step

Hello everyone,
i want to fill a kind of list (Cluster ?) with a Number and a TF-Value.
This functionality should be built in each step of my program.
My goal is to add an entry (Number;TF) in a kind of list in each step.
i tried to make this with an cluster but i can't find a way to add a new entry ...
so my question is how to do this ?
Thanks
br
Luke
Solved!
Go to Solution.

Build an array of this cluster. Add to array.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Similar Messages

I ve seven steps for registration process. In each step it fills informati

I ve seven steps for registration process. In each step it fills information of the user in different jsps. I need a navigational progress from step 1 to 7. May I know how can I achieve this? Is AJAX required for this? If so what part is required?

SirivaniG wrote:
I ve seven steps for registration process. In each step it fills information of the user in different jsps. I need a navigational progress from step 1 to 7. May I know how can I achieve this? http://java.sun.com/j2se/1.5.0/docs/api/java/net/HttpURLConnection.html
Is AJAX required for this?No

The local node entry in Cluster Configuration information does not match wi

In installing 10.1.0.3 CRS on Solaris 8 x86, I keep getting the error, "The local node entry in Cluster Configuration information does not match with the entry in /etc file." Both addresses are defined in the /etc/inet/hosts and are pingable. There seems to be no way to get past this issue. Earlier I installed 10.2.0.1 CRS on SLES9 SP2 on a system with the same network settings and had no problem. Is there some way to force the installer to accept the addresses given and proceed past this step?

All,
I think there can be two problems
1.
if your host file looks as follows
# Public
192.168.2.x rac1.localdomain rac1
192.168.2.x rac2.localdomain rac2
#Private
192.168.0.x rac1-priv.localdomain rac1-priv
192.168.0.x rac2-priv.localdomain rac2-priv
#Virtual
192.168.2.x rac1-vip.localdomain rac1-vip
192.168.2.x rac2-vip.localdomain rac2-vip
then you should be able to do rsh or ssh sucessfully for each aliases at least one from each nodes
(ex)
on node rac1
ssh rac1 date
ssh rac1.localdomain date
ssh rac2 date
ssh rac2.localdomain date
2. you should create user equivalance on all the nodes as follows
Edit the /etc/hosts.equiv file to include all the RAC nodes:
+rac1 oracle
+rac2 oracle
+rac1-priv oracle
+rac2-priv oracle

Reading the output values after each step executes in LabVIEW User Interface

Hello all,
Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
Problem: is there a way to execute the subsequent steps programatically and get the output values from each of them?
I have already extended a little bit a Full OI interface for TestStand to load up any sequence, choose some of the steps and run them step by step (something like option to Run Selected steps). What I am trying to do is to add some actions between each step and do that in User Interface (I can't modify the sequence!), so I am starting the NewExecution with some previously configured InteractiveArgsParam and set an option breakAtFirstStep to True. Afterwards I am just doing something like Step Over when debugging the sequence and this works good, but I didn't fine a way yet to read the output values from the steps...
Then, if I wait until the execution finishes I can read my Results by processing the ResultObject, but this works only after finalizing of the test sequence. Since I wanted to stop after each step, read the values, do some actions and continue to the next step I tried to register an event callback for Trace of Execution View Manager. I can see that after each executed step this event is triggered, but when I try to read a ResultObject returned in Event Data it is not filled with values (ResultList seems to be empty?). Is it a proper behaviour or maybe I am doing the readout in wrong way? (It is the same VI as for reading ResultObjects after sequence finishes and there it works fine for arrays, containers and other data types).
Like I mentioned I can't modify the Test sequences, I can't add a UImessages.
What are my options? Should the trace event returns all output values from each steps or is it just used for status checking? Or maybe there is completely different approach to that matter?
Thanks in advance for any suggestions,
Best Regards.
CLA, CTD, CLED @ Test & Measurements Solutions Poland
Solved!
Go to Solution.

Thanks for your replay, I have tried to build it in my LabView Block Diagramm, es seems like this image.
But the variable GetNumSubProperties ist always 0. Why?
PS: I need only the variable "Step.Result.PassFail" from the last step, do you know, how can I get it? I think, it is maybe easier than read all the "Result".
Attachments:
ReadStepResultInLabview.JPG ‏39 KB

FM to read the different steps in workflow and the status at each step

Hi All,
Is there any FM in SAP which gives the detail roadmap of the steps taken in a workflow and the diffrent status or decision at each step.
I am looking for something like what you see when you click on the "STARTED WORKFLOW" in the business workplace outbox.
Which shows up the "steps in the process so far " and the decision and the agents for each of them.
Thanks,
Charan.

Hi,
You can get the status according to the task. please check with FM "SAP_WAPI_GET_WI_DELTA".
Regards
SM Nizamudeen

Can we view line numbers next to each step in sequence file ?

Hi,
I have a sequence file having 600 steps. I would like to know is there any option in test stand to set line number for each step in sequence editor so that it will be helpful for review.
Example:
1 Action1
2 Action2
600 Action600
Regards,
krishna
Solved!
Go to Solution.

Krishna,
If you just want to know the index of a step, this information is displayed at the bottom of the sequence editor in the status bar. It shows you how many steps there are in the sequence, how many you have selected, and the index(es) of the selected step(s).
It is also possible to display this information in the steps view as a column if you are willing to create a new column. Follow the instructions in this KB to see how to create a new column:Changing Columns Properties of the TestStand Sequence Editor Execution View Window.
One of the types of colums is Index. Simply set your column to that type and you will see step indexes as shown below.
Message Edited by Josh W. on 07-01-2009 01:50 PM
Message Edited by Josh W. on 07-01-2009 01:53 PM
Josh W.
Certified TestStand Architect
Formerly blue

What happens at each step of an iPhone Backup and Sync?

Can someone tell me exact what is happening at each step of an iPhone backup and sync?
I see 5 to 7 steps.
So what has happened after step 1, then after step 2, and so forth?
I would appreciate if only those who knows exactly what happens will list it in their reply.
Please don't tell me to google the question, or point me to a link. I tried all those steps, and I could not find the answer.
If you can't tell me precisely what happens after each step of a sync, please don't reply.

You can find more info on error -50 here... http://support.apple.com/kb/TS1275

TS1372 What else can I try? My Ipod classic stays in restore mode. I have done each step listed above, some of them several times. Is my Ipod toast?

Anyone have an idea what I can try to restore my Ipod classic. I have followed each step listed in the support manual. Some of them several times. Each time I try and connect, it prompts me to restore, which I do. It then gives me the error 1439. What does this mean?

Check if your iPod is toast by doing the iPod Disk Diagnostic as posted earlier by tt2
It wont fix your problem, but help in troubleshooting.

Fill the 'Objects and Attachments ' in Decision step with milestone detils

My requirement is to fill the 'Objects and Attachments ' in Decision step with a display milestone details as seen in cj20n transactiobn.
I am using business object MLST_NETW but display method does not show detsils of milestone .
is there any other way i could possibly show th emilestone detsils as seen in cj20n transction.

Yes th ebinding is correctly done when I chcek in SBWP for that item it displays the link with the milestone no and when i cleck on the link it asks me the milstone no also but it does not display any detils of milestone or does not navigate to th emilestone page.
I tried testing the display method of the stnadard business object MLST_NETW independly but i see even here the milestone detils page not appearing .Is there some other bO which has to be used or some way through which i colud navigate to the milestone detsils page transaction is CJ20n

I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS. While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one. Thi

I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS. While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one. This is a big problem. I must be able to save on the newer computer. Do I need to buy a new computer with a more up-to-date OS? Please help.

Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.

Identifying the time spent on each step in Proxy Service?

Hi Everyone,
Is there anyway to identify how much time each step in proxy service is taking?
I am using OSB 10.3.1
Thanks & Regards
Himanshu

Yes there is.
Open sbconsole.
Go to operations tab on your proxy service, select Monitoring, enable it by selecting the checkbox.
Then, in the section on alerts, you would see a drop down having three values - Service Level, Pipeline Level, Action Level (or maybe activity level, have forgotten). Select the Action Level.
Run your proxy service for the desired time.
In the sbconsole dashboard, you should be able to see the Metrics of each action within the proxy service. It is most probably found in the last tab of monitoring page within OSB Dashboard.
Hope this helps.

TS1406 I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Messages open several tabs in Thunderbird, one for each step in the mail exchange

A friend has a new PC with Windows 8.
If a message is a reply, when opening the message each step in the mail exchange will open in a different tab in Thunderbird.

Well, the question is that when I open a message in the Inbox, either by double clicking or by pressing Enter, if the message is a reply, i.e if there are more than one message "behind" the message I click to open, every step in the message history is open in a separat tab. Please see attachment

Get Start and End times for each step in a job

Can someone tell me how to get the start and end times for each step in a background job? Table TBTCP only stores the time that the step was saved in a background job. Table TBTCO stores the times for the entire job and not each individual step.
Thanks.
Ryan

Hi,
Please check this tables and FM perhaps they may help
TBTCJSTEP - Background Job Step Overview
TBTCR - Batch scheduler execution time
TBTCS - Background Processing: Time Schedule Table
GET_JOB_RUNTIME_INFO
Regards,
Ferry Lianto

Log the start time of each step to database

Hello,
i want to log the start time of each step to my sql datatbase. With the UUT start time it works (Str(Logging.StartDate.Month) + "-" + Str(Logging.StartDate.MonthDay) + "-" + Str(Logging.StartDate.Year) + " " + Str(Logging.StartTime.Hours) + ":" + Str(Logging.StartTime.Minutes) + ":" + Str(Logging.StartTime.Seconds)).
But how can i make it with the start time of the steps?
greetings
schwede
TS 3.0

Schwede,
see attached Sequencefile for an example what Ryan is talking about.
We use Additional Results to transfer the Timestamps to the ResultList (which is the origin for "Logging" ). You can include the Locals.StepDate, Locals.StepTime with other methods as well to the ResultList. I used the PostExpression of the last Statement to draft this.
hope this helps,
Norbert
[EDIT] PS: The SequenceFile is created in TS 4.1
Message Edited by Norbert B on 02-18-2009 07:37 AM
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Attachments:
StepTimestamping.seq ‏6 KB

Fill a entry in cluster in each step

Similar Messages

Maybe you are looking for