Reading the output values after each step executes in LabVIEW User Interface
Hello all,
Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
Problem: is there a way to execute the subsequent steps programatically and get the output values from each of them?
I have already extended a little bit a Full OI interface for TestStand to load up any sequence, choose some of the steps and run them step by step (something like option to Run Selected steps). What I am trying to do is to add some actions between each step and do that in User Interface (I can't modify the sequence!), so I am starting the NewExecution with some previously configured InteractiveArgsParam and set an option breakAtFirstStep to True. Afterwards I am just doing something like Step Over when debugging the sequence and this works good, but I didn't fine a way yet to read the output values from the steps...
Then, if I wait until the execution finishes I can read my Results by processing the ResultObject, but this works only after finalizing of the test sequence. Since I wanted to stop after each step, read the values, do some actions and continue to the next step I tried to register an event callback for Trace of Execution View Manager. I can see that after each executed step this event is triggered, but when I try to read a ResultObject returned in Event Data it is not filled with values (ResultList seems to be empty?). Is it a proper behaviour or maybe I am doing the readout in wrong way? (It is the same VI as for reading ResultObjects after sequence finishes and there it works fine for arrays, containers and other data types).
Like I mentioned I can't modify the Test sequences, I can't add a UImessages.
What are my options? Should the trace event returns all output values from each steps or is it just used for status checking? Or maybe there is completely different approach to that matter?
Thanks in advance for any suggestions,
Best Regards.
CLA, CTD, CLED @ Test & Measurements Solutions Poland
Solved!
Go to Solution.
Thanks for your replay, I have tried to build it in my LabView Block Diagramm, es seems like this image.
But the variable GetNumSubProperties ist always 0. Why?
PS: I need only the variable "Step.Result.PassFail" from the last step, do you know, how can I get it? I think, it is maybe easier than read all the "Result".
Attachments:
ReadStepResultInLabview.JPG 39 KB
Similar Messages
-
Find out and get the bit value for each pixel in image
i use 16bit image. the image is 200x200 pixels. i need to know what is
the bit value for each pixel. example(0111111011111101).
where i can see the bit value output. if somebody got the example surce code please send it to me.coz i need the bit value to find out how many RGB color that use in the image. thanks for ur help.How many logins do you have???
-
How to read the output from 'tlist entersq'
Hi
Where can I find information on interpreting the output from 'tlist entersq' ?
We have a box that seems to go into a lock, no communication through network, nor terminal ttya.
I did an abort on the panel and sync to force a memory dump
I'm using scat to investigate the result.
SolarisCAT(vmcore.0)> thread summary
reference clock = panic_lbolt: 0x114c6f9
11 threads ran since 1 second before current tick (11 user, 0 kernel)
11 threads ran since 1 minute before current tick (11 user, 0 kernel)
63 TS_RUN threads (50 user, 13 kernel)
2 TS_STOPPED threads (0 user, 2 kernel)
10 TS_FREE threads (0 user, 10 kernel)
0 !TS_LOAD (swapped) threads
0 threads trying to get a mutex
0 threads trying to get an rwlock
128 threads waiting for a condition variable (89 user, 39 kernel)
1 threads sleeping on a semaphore (0 user, 1 kernel)
12 threads sleeping on a user-level sobj (12 user, 0 kernel)
7 threads sleeping on a shuttle (door) (7 user, 0 kernel)
0 threads in biowait()
1* threads in entersq() (1 user, 0 kernel)
63 threads in dispatch queues (50 user, 13 kernel)
225 total threads in allthreads list (159 user, 66 kernel)
0 thread_reapcnt
5 lwp_reapcnt
230 nthread
SolarisCAT(vmcore.0)> tlist entersq
thread pri pctcpu idle pid wchan command
0x300027dd7a0 142 0.024 1m41.83s 1684 0x300007fff18 /sz/tcp/bin/tig_tcp.bin
1 thread in entersq() found.
threads in entersq() by syncq:
1 thread: 0x300027dd7a0
syncq @ 0x300007ffee0
sq_count: 0 sq_head: 0x30001de6e80 sq_tail: 0x30001de6e80
sq_evhead: 0xcff010000 sq_evtail: 0x100000000cafe sq_nqueues: 0
sq_needexcl: 0 sq_private: 0x3000155dd18 sq_next: 0xbaddcafe
sq_pri: 276
sq_occount: 0
sq_flags: 0x200 ()
sq_type: 0x0
sq_svcflags: 0x0
sq_lock @ 0x300007ffee0:
adaptive mutex: owner: 0x0 waiters: false
per-module syncq for ip
streamtab @ 0x14ad6b0
qinit @ 0x14ad570
modinfo @ 0x14ad540
queues:1 sq_msgs:1 sq_mblks:36 sq_alloc:13247273932581836904
SolarisCAT(vmcore.0)> thread 0x30001de6e80
==== user thread: 0x30001de6e80 address translation failed for pid: 32 bytes @ 0x452e0d0a2a2a2a20
pid: 0 PIL: 3 ====
cmd:
t_wchan: 0x30001dd5640
t_stk: 0x1263bfc sp: 0x0 t_stkbase: 0x30002aa3ec0
t_pri: 0 pctcpu: 0.000036 t_lwp: 0x30001de0d80 machpcb: 0x30001dd4c08
t_procp: 0x30002df2900 p_as: 0x30002df2978 hat: 0x6420373031206368address translation failed for hat_3: 80 bytes @ 0x6420373031206368
cnum: 0x0
address translation failed for hat_3: 80 bytes @ 0x6420373031206368
size: 4984936174853958176 rss: 0
bound cpuid: 768 bound psrset: 768 last cpuid: 0
idle: -17371523 ticks (190888 days 10 hours 34 minutes 34.26 seconds)
start: Wed Jul 10 21:34:52 6497
age: -3297429488912 seconds (38164693 days 3 hours 48 minutes 32 seconds)
swapped out: 3298566244800 (190888 days 4 hours 48 minutes 49.63 seconds later)
interrupted (pinned) thread: 0x30001de6ef8
tstate: unknown state
tflg: T_INTR_THREAD - thread is an interrupt thread
T_WOULDBLOCK - for lockfs
T_DONTBLOCK - for lockfs
T_DONTPEND - for lockfs
WAITCVSEM - waiting for a lwp_cv or lwp_sema on sleepq
tpflg: TP_CHKPT - thread is being stopped via CPR checkpoint
TP_PRVSTOP - thread is virtually stopped via /proc
TP_MSACCT - collect micro-state accounting information
TP_STOPPING - thread is executing stop()
tsched: none set
pflag: SLOAD - in core
SLOCK - process cannot be swapped
SPREXEC - process is in exec() (a flag for /proc)
SSCONT - SIGCONT has been posted to the process
SBPTADJ - adjust pc on breakpoint trap (/proc)
SUGID - process was result of set[ug]id exec
SJCTL - SIGCLD sent when children stop/continue
SNOWAIT - children never become zombies
SVFORK - process resulted from vfork
SVFWAIT - parent of vfork waiting for child to exec
EXITLWPS - have lwps exit within the process
SWAITSIG - SIGWAITING sent when all lwps block
HOLDFORK1 - hold lwps in place (not cloning)
SMSACCT - process is keeping micro-state accounting
pc: 0x30003e63600 0x30003e63600: illegaltrap 0x00000000
-- no stack --Hello ejp,
First of all i thank you for the reply.
I explain the process which i am doing in side the thread.
After connecting to the remote machine, it asks another password.
so i read the output after connecting. if it equals "password:", then write the 2nd password. then i read the output. it will be like "system>" . if this prompt comes like this, then i write the super user name and super user password. then the prompt will be like "system#". then i write the command which i need to execute and read the output whether the command is success or not.
So after every output read, i interrupt the thread using interrupt() method. its working fine if i execute via GUI ie, click the button. But its not working when i scheduled this job in a scheduler ie, it will be executed when the time elapsed.
Give an idea to fix this bug please.
rgds
tskarthikeyan -
How find out the duplicate value from each columns.
I have below four columns,
How can i find out the duplicate value from each columns.
with All_files as (
select '1000' as INVOICE,'2000' AS DELIVERYNOTE,'3000' CANDELINVOICE,'4000' CANDELIVERYNOTE from dual union all
select '5000','6000','7000','8000' from dual union all
select '9000','1000','1100','1200' from dual union all
select '1200','3400','6700','8790' from dual union all
select '1000','2000','3000','9000' from dual union all
select '1230','2340','3450','4560' from dual
SELECT * FROM All_files
Output should be as per below.
1000 2000 3000 4000
9000 1000 1100 1200
1200 3400 6700 8790
1000 2000 3000 9000
Required to check uniqueness in cross columns.
Thanks.Try this (sorry about the formatting)...
WITH all_files AS (SELECT '1000' AS INVOICE,
'2000' AS DELIVERYNOTE,
'3000' CANDELINVOICE,
'4000' CANDELIVERYNOTE
FROM DUAL
UNION ALL
SELECT '5000',
'6000',
'7000',
'8000'
FROM DUAL
UNION ALL
SELECT '9000',
'1000',
'1100',
'1200'
FROM DUAL
UNION ALL
SELECT '1200',
'3400',
'6700',
'8790'
FROM DUAL
UNION ALL
SELECT '1000',
'2000',
'3000',
'9000'
FROM DUAL
UNION ALL
SELECT '1230',
'2340',
'3450',
'4560'
FROM DUAL),
t_base
AS (SELECT invoice
|| ','
|| deliverynote
|| ','
|| candelinvoice
|| ','
|| candeliverynote
str
FROM all_files),
t_str
AS (SELECT str || ',' AS str,
(LENGTH (str) - LENGTH (REPLACE (str, ','))) + 1
AS no_of_elements
FROM t_base),
t_n_rows
AS ( SELECT LEVEL AS i
FROM DUAL
CONNECT BY LEVEL <=
( SELECT SUM (no_of_elements) FROM t_str)),
t_build AS (SELECT t_str.str,
nt.i AS element_no,
INSTR (t_str.str,
DECODE (nt.i, 1, 0, 1),
DECODE (nt.i, 1, 1, nt.i - 1))
+ 1
AS start_pos,
INSTR (t_str.str,
1,
DECODE (nt.i, 1, 1, nt.i))
AS next_pos
FROM t_str
JOIN
t_n_rows nt
ON nt.i <= t_str.no_of_elements),
t_build2
AS (SELECT RTRIM (str, ',') AS original_string,
SUBSTR (str, start_pos, (next_pos - start_pos))
AS single_element,
element_no
FROM t_build),
t_build3
AS (SELECT single_element,
COUNT( * )
OVER (PARTITION BY single_element
ORDER BY single_element)
ele_count
FROM t_build2)
SELECT DISTINCT INVOICE,
DELIVERYNOTE,
CANDELINVOICE,
CANDELIVERYNOTE
FROM all_files, t_build3
WHERE ele_count > 1
AND ( INVOICE = single_element
OR DELIVERYNOTE = single_element
OR CANDELINVOICE = single_element
OR CANDELIVERYNOTE = single_element)I think this will be faster than the previous solution?
Cheers
Ben
Edited by: Munky on Feb 17, 2011 2:11 PM - "I think this will be faster than the previous solution?", nope - it's not :( -
How to get the RGB value of each pixel of a hole image?
Hi,
I'm trying the get the RGB(between 0 and 255) value of each pixel of a hole image. I writte this code:
public void convertImage()
int w = bufferedImage.getWidth();
int h = bufferedImage.getHeight();
int[] rgbs = new int[w*h];/* create a new array */
bufferedImage.getRGB(0,0,w,h,rgbs,0,w);
for(int i=0; i<10; i++)
System.out.println(rgbs);
But the value rgbs[] contain an 8 bits integer, it's possible to have the RGB of this.
In other case, do you have another sample of code to help me to get the RGB value of each pixel of a hole image?
thanks.Hi, I am currently working on an application which requires the generation of color histograms that are a representation of a given image ie; myImage.jpg. I have made use of the JAI API and used it's Histogram class to generate a histogram vector for the image that I provide.
However, upon closer inpsection, I have realised the following:-
(1) The image, as it contains multiple colours is a multi-banded image ie; this means that each individual pixel in the image contains multiple colour samples (I assume) ie; Red, Blue Green. Due to this, a "separate list of bins represents each individual band". This means that for myImage.jpg, there is not ONE individual vector that contains data such as "400 pixels purple" "5000 pixels yellow" etc but there are indeed 3 vectors that represent the image.
I have found this to be true using the getBinSize(int band, int bin) method call - the first parameter being 0,1,2 for Red Blue or Green.
My basic (or complex) problem is that I basically want to generate 2 color histogram vectors that represent 2 separate images and then compare these vectors "side-by-side" using the vector comparison algorithms that I have already developed.
Is there a way of using Java's Histogram class and it's associated methods to be able to store all colour information for an image in only ONE vector?? I am pretty certain that this is not possible, so my dilemma is now: - If I have an image and it is represented by three separate vectors/histograms, then how can I possibly compare these to say whether an image matches or not.
When a pixel is analysed by a program, what seems to be the result returned is how that pixel is made up in terms of Red, Green or blue ie; a purple pixel is X blue, X red and X green and hence 3 vectos existing.
Can anybody offer advice on how to achieve this task of looking at a pixel and simply determining it's actual color. I would preferably like to keep my code that I have already developed ie; the use of the Java Histoogram class but any other offerings are appreciated. -
Reading the output from another program.
I haven't used Java in a good long while so I need someone to point me in the right direction. I have a C program that I call from a command line (windoze boxen) and it spits out some neat data. I can call it from inside a Java program, but how do I then read the output from the calling Java program? I'd just alter the C program, but I lost the source.
This article explains how to correctly execute another program from your
Java program, and read its output:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html -
Java API to read the Encrypted Values from Windows Registry settings
Is there any Java API to read the Encrypted Values from Windows Registry settings ?
My Java Application invokes a 3rd party Tool that writes the key/value to windows registry settings under : “HKLM\Software\<3rdparty>\dataValue”.
This entry is in BINARY and encrypted with 3DES, using crypto API from Microsoft.
3rd party software to encrypt the data stored in registry it
either uses C++ code: and uses the call “CryptProtectData” and “CryptUnProtectData” or
If it is a .NET (C#) it uses the call “Protect” or “UnProtect” from class “ProtectData” of WinCrypt.h from the library “Crypt32.lib.
Note: The data is encrypted using auto-generated machinekey and there is no public key shared to decrypt the Encrypted data.
Since the data is encrypted using auto-generated machinekey the same can be decrypted from a .Net / C++ application using CryptUnprotectData or UnProtect() API of WinCrypt.h from the library “Crypt32.lib.
To know more about Auto-Generated MachineKey in Windows refer the links below
http://aspnetresources.com/tools/machineKey
http://msdn.microsoft.com/en-us/library/ms998288.aspx
I need to find a way in Java to find the equivalent API to decrypt (CryptUnprotectData) and Microsoft will automatically use the correct key.
But i couldn't find any informato related to Java APIs to enrypt or decrypt data using auto-generated machinekey.
Is there a way to read the encrypted data from Windows regsitry settings that is encrypted using the Auto-Generated Machine Key ?
Kindly let me know if Java provides any such API or mechanism for this.If the symmetric key is "auto-generated" and is not being stored anywhere on the machine, it implies that the key is being regenerated based on known values on the machine. This is the same principle in generating 3DES keys using PBE (password-based-encryption). I would review the documentation on the C# side, figure out the algorithm or "seed" values being used by the algorithm, and then attempt to use the JCE to derive the 3DES key using PBE; you will need to provide the known values as parameters to the PBE key-generation function in JCE. Once derived, it can be used to decrypt the ciphertext from the Regiistry in exactly the same way as the CAPI/CNG framework.
An alternate way for Java to use this key, is to write a JNI library that will call the native Windows code to do the decryption; then the Java program does not need to know details about the key.
That said, there is a risk that if your code can derive the key based on known seeds, then so can an attacker. I don't know what your applicatiion is doing, but if this is anything related to compliance for some data-security regulation like PCI-DSS, then you will fail the audit (for being unable to prove you have adequate controls on the symmetric key) if a knowledgable QSA probes this design.
Arshad Noor
StrongAuth, Inc. -
Reading the output from a object running in the local machine.
Reading the output from a object running in the local machine.
By using a signed applet i am lunching a small application that returns an image object, how to read that without storing it in the hard disk.
Which means i need to read the image object return by the local application using applet or jsp .
i am using tomacat and an html page with an applet with it to lunch the application.You can write that image in a binary format using OutputStream for System.out and then read it in your applet.
-
Unable to read the total value.
Hi guys,
I am able to get the total for alv table column.. but i want to display the total value in some other text view field.
In order to do that... first i have to read the total value, and have to set the same to text view field,
total value is of type ( DATA: LV_AGGR_RULE TYPE REF TO CL_SALV_WD_AGGR_RULE. )
but my text view field attribute is of STRING TYPE.
So am getting conversion error. Pleas help me in this.
Regards
Farooq
Edited by: farooq basha on Jun 13, 2011 12:52 PMHi ,
Try to loop your internal table on the column "Amount" and make a sum for that particular column, u will get the required sum Amount..
Thanks
Aisurya -
How to read the selected value of a dropdown list box
Hello,
I have 2 custom fields which are of type dropdown list on Accounts(CRMM_ACCOUNT) PCUI application details tab.I need to read the selected value of first dropdown list item,based on that second dropdown list will be populated.
I know where to populate the dropdown list box,it is in FILL_DROPDOWN_LISTBOX.
I dont know how to trap the selection made on dropdown list.
PLease guide me on how to trap the dropdown list field selection value.
Thanks in advance.
Thirumala.Hello,
Check what is done in standard for the fielf REGION which is inked to the country.
Otherwise, you can do the following :
- in field group customizing, for field 1, flag the 'send request' flag. So, when you change the value in this field via the dropdown, the MAC methods are immediately called.
- Put the new value in a global variable (GV).
- in the fill_dropdown_listbox method, get the value from this GV and based on it, filter the values for the dropdown of field 2.
Hope this will help you,
Regards,
Frederic -
Read the first word of each line in a text file
i need to read the first word of each line of a text file.
i know of line.split() but not actually sure how i would go about using it
Any help most appreciated
Many Thanks
BenHi thanks for the reply!
this is what i tried... and it still doesn't get me the first word of each line!
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.awt.Color;
import java.awt.event.ActionEvent;
import java.io.*;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import javax.swing.text.*;
import javax.swing.event.*;
import java.util.Calendar;
import java.util.Scanner;
import java.util.Vector;
import java.text.SimpleDateFormat;
import java.net.InetAddress;
import java.net.UnknownHostException;
import java.io.BufferedReader;
public class testing {
Vector progs=new Vector();
Vector rand=new Vector();
String[] tmp = new String [2];
String str;
String str2="ewerwer";
String str3;
public void programTest()
try
BufferedReader in = new BufferedReader(new FileReader("progList.log"));
while ((str = in.readLine()) != null)
progs.add(str);
catch(IOException e)
System.out.println("cannot read file");
//////THE ISSUES IS HERE....I WANT TO GET THE FIRST WORD FROM EACH LINE OF THE FILE!!!
try
BufferedReader in2 = new BufferedReader(new FileReader("eventLog.log"));
while ((str = in2.readLine()) != null)
tmp = str.split(" ");
System.out.println(tmp[0]);
catch(IOException e)
System.out.println("cannot read file");
public static void main(String[] args)
testing B = new testing();
B.programTest();
// B.fileToVector();
//B.LoginWindow();
//B.anomDetect();
}//end class -
Hai to all,
how can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi.
as u can see in my block diagram(attached), i can use statistic to read the RMS value for the data but i cant's use it on the FFT Spectrum (mag-Phase).vi .
Thank you for helping.
Attachments:
block diagram.jpg 48 KBhafizzuddin wrote:
thank you for the opinions, for now i am not using any express Vi..
In the long run you will benefit from this. Anyway is your problem solved, or do you need more help?
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
Read the output of the iseries CL Program from Java
I have a Java program running on the iseries(AS400). I need to call a CL program from this JAVA.I have to pass 7 arguments to it.Out of 7, three are input parameters to CL and other 4 are its output parameters to the calling JAVA program. I am using Runtime.getRuntime().exec(arguments) to call the CL. Please suggest me how to read the output from the CL in the JAVA program.
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
Kidding:
If a method has at least 7 parameters, chances are one or two have been forgotten. -
How to the *material costing* after below steps
Hi sapgurus
please help us,
How to the material costing after below steps
1. Actual costing /material ledger
2. Material update
3. Actual costing
4. Production start up
5. Customizing setting in OBYC
please sent to any documents.
Thanks & Regards
SriDear Friend
A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
That means the order 10000 is closed
Case 1
Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
Case2
But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
But you can test it if it throws any warning message we can try to convert that error
But in case 2 it is not happening(even warning is not there)
Regards
Raja -
Read the signal value that pass over the upper and lower limit..
how to create the system which can read the signal value that pass the lower and upper limit? i've try but the system only read the value that in range of upper and lower limit..thanks..
Im not very sure if this system can read the value that pass over the limit..because at the save file data so many value(i will attach that file)..and i dont know how to setting to get the failure values only..
Actually i want to build some system that can read and save value that pass over the limit..i take the signal from simulation sine signal..no hardware required..
im very new with this software and im in learning process..
A very big thanks to all that helping me..
save file data from the system
Channels 8
Samples 1 1 1 1 1 1 1 1
Date 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05
Time 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216
X_Dimension Time Time Time Time Time Time Time Time
X0 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1
Delta_X 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000
***End_of_Header***
X_Value Sine (Negative Peak) Failures (Negative Peak) Upper Limit (Negative Peak) Lower Limit (Negative Peak) Sine (Positive Peak) Failures (Positive Peak) Upper Limit (Positive Peak) Lower Limit (Positive Peak) Comment
0.100000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
0.200000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
0.300000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
0.400000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
0.500000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
0.600000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
0.700000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
0.800000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
0.900000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
1.000000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
1.100000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
1.200000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
1.300000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
1.400000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
1.500000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
1.600000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
1.700000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
1.800000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
1.900000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
2.000000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
2.100000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
2.200000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
2.300000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
2.400000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
2.500000 -6.996546 -6.996546 5.000000 -5.000000 6.999999 6.999999 5.000000 -5.000000
2.600000 -6.996546 -6.996546 5.000000 -5.000000 7.000000 7.000000 5.000000 -5.000000
2.700000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
2.800000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
2.900000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
3.000000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
3.100000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
3.200000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
3.300000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
3.400000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
3.500000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
3.600000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
3.700000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
3.800000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
3.900000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
4.000000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
4.100000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
4.200000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
4.300000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
4.400000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
4.500000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
4.600000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
4.700000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
4.800000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
4.900000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
5.000000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
5.100000 -6.999136 -6.999136 5.000000 -5.000000 6.999066 6.999066 5.000000 -5.000000
5.200000 -6.999204 -6.999204 5.000000 -5.000000 6.998993 6.998993 5.000000 -5.000000
5.300000 -6.999269 -6.999269 5.000000 -5.000000 6.998917 6.998917 5.000000 -5.000000
5.400000 -6.999331 -6.999331 5.000000 -5.000000 6.998838 6.998838 5.000000 -5.000000
5.500000 -6.999391 -6.999391 5.000000 -5.000000 6.998756 6.998756 5.000000 -5.000000
5.600000 -6.999447 -6.999447 5.000000 -5.000000 6.998672 6.998672 5.000000 -5.000000
5.700000 -6.999501 -6.999501 5.000000 -5.000000 6.998585 6.998585 5.000000 -5.000000
5.800000 -6.999552 -6.999552 5.000000 -5.000000 6.998495 6.998495 5.000000 -5.000000
5.900000 -6.999601 -6.999601 5.000000 -5.000000 6.998403 6.998403 5.000000 -5.000000
6.000000 -6.999646 -6.999646 5.000000 -5.000000 6.998307 6.998307 5.000000 -5.000000
6.100000 -6.999689 -6.999689 5.000000 -5.000000 6.998209 6.998209 5.000000 -5.000000
6.200000 -6.999729 -6.999729 5.000000 -5.000000 6.998108 6.998108 5.000000 -5.000000
6.300000 -6.999766 -6.999766 5.000000 -5.000000 6.998005 6.998005 5.000000 -5.000000
6.400000 -6.999801 -6.999801 5.000000 -5.000000 6.997898 6.997898 5.000000 -5.000000
6.500000 -6.999833 -6.999833 5.000000 -5.000000 6.997789 6.997789 5.000000 -5.000000
6.600000 -6.999862 -6.999862 5.000000 -5.000000 6.997677 6.997677 5.000000 -5.000000
6.700000 -6.999888 -6.999888 5.000000 -5.000000 6.997563 6.997563 5.000000 -5.000000
6.800000 -6.999912 -6.999912 5.000000 -5.000000 6.997445 6.997445 5.000000 -5.000000
6.900000 -6.999932 -6.999932 5.000000 -5.000000 6.997325 6.997325 5.000000 -5.000000
7.000000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000
7.100000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
7.200000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
7.300000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
7.400000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
7.500000 -6.999999 -6.999999 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
7.600000 -7.000000 -7.000000 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
7.700000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
7.800000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
7.900000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
8.000000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
8.100000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000
Maybe you are looking for
-
please help me....my original computer that had my itunes is unoperable and now when i go to itunes on my new computer i am unable to get all the movies and music from the old computer. i hope someone is able to help me retrieve them. thank you
-
Sender File Adapter and content conversion
Hi, How can we remove the last line from the file using content conversion? The last line should not be read from the input file. Like for the first line we can use Document Offset .......similarly do we have any option for the last line?
-
Urgent ...how to send output of sap through mail
Could you please guide me how to send output of SAP Script through mail in PDF format. Thanks in Advance.... Regards, Kumar.
-
Do timelines work in IE 5.2?
Hi anyone, I have built my site using timelines and they do not seem to be working in Internet Explorer 5.2 on my mac. Can someone help please? http://home.triad.rr.com/peggydavis
-
Certificate based authentication with Anyconnect
Dears, i successfully configured ASA to be used as VPN gateway with anyconnect using certificate in authentication , my issue my be not realted to Cisco directly. i am using CA server installed on Windows 2008 R2 , when i checked the issued