Identifying the time spent on each step in Proxy Service?

Hi Everyone,
Is there anyway to identify how much time each step in proxy service is taking?
I am using OSB 10.3.1
Thanks & Regards
Himanshu

Yes there is.
Open sbconsole.
Go to operations tab on your proxy service, select Monitoring, enable it by selecting the checkbox.
Then, in the section on alerts, you would see a drop down having three values - Service Level, Pipeline Level, Action Level (or maybe activity level, have forgotten). Select the Action Level.
Run your proxy service for the desired time.
In the sbconsole dashboard, you should be able to see the Metrics of each action within the proxy service. It is most probably found in the last tab of monitoring page within OSB Dashboard.
Hope this helps.

Similar Messages

  • How to determine the time duration of each job for a particular report

    Hi guys,
    I am facing a very interesting problem which I want to share with all of you-hoping to get some input from you
    enlightened fellas :).
    I have vendor and vendor sub-range maintained in one custom table. For each vendor I have got article site combination maintained in another table. The thing is I have to execute this program in background. Now for each vendor I may have only 1 article or multiple articles. So if I schedule the job for 60 min. say then for 1 article the time alloted will be too big and for multiple articles the time alloted may prove to be too small. Another thing from a functional point of view is a vendor which has 1 article today may have more articles added to his name tomorrow (if the customer likes his product the company may buy more from him). So the point is we have to dynamically adjust the time alloted for each job.
    I could not find any utility in ABAP which can do this.
    Can any of you please help me?
    Thanks a lot !
    Hasso.
    Edited by: Hasso14 on Apr 28, 2011 3:06 PM

    Exaactly-only I want to find the best time needed to finish for an article or multiple articles i.e I do not know how many articles will be available for each vendor beforehand before doing a select on the 2 tables. But once I know the number (maybe 1 or more than 1) I want to allot the best time for that article/lot of articles(maybe JOB_OPEN  technique ?).Also the number of articles may vary over time so the algorithm should take care of that too.-quite a tricky prob :)-I would request the others to see this reply which I think will clarify their doubts.
    Edited by: Hasso14 on Apr 28, 2011 9:03 PM

  • How to get the time interveral for each status of worklow (wating,Inprocess

    Hi Friends,
    I have requreiemnt to get the time interval for each status of workflow.
    ex.
                                                                     status
    workflow id  | startd date | enddate       | waiting | Inprocessing|Error|......
    1026            10.10.2008  25.10.2008        1hr      1hr 30 min    2 hr
    Please do give me idea how to get the time stam of each status of workflow.
    Thanks,
    D.prabhu

    Hi,
    I think the following tables would be helpful to you:-
    SWW_CONT     Container Contents for Work Item Data Container
    SWW_CONTOB     "Container Cont. for Work Item Data Container (Only Objects)"     
    SWWLOGHIST     History of a work item     
    SWWORGTASK     Assignment of WIs to Org.Units and Tasks     
    SWWUSERWI      Current Work Items Assigned to a User     
    SWWWIHEAD     Header Table for all Work Item Types
    Hope it Helps!
    Regards,
    Kanika

  • Calculate the time spent to execute your program

    Hi
    I have a pgm which calculates the response time in milllisecond using method System.currentTimeMillis(). And I get answer 0.
    My question is If we measure the time in terms of nanosecond, do you think we still get zero answer?and What is your explanation for that?
    Waiting for reply. Thanks in Advance
    Regards,
    Jyoti

    Hi,
    Here is the code for calculating the response time.
    public class RunLinkedEvenOddList {
         public static void main(String[] args) {
              long time1;
              long time2;
              time1 = System.currentTimeMillis();
              System.out.println("Program 2 output:");
    LinkedEvenOddList eolist = new
    ew LinkedEvenOddList();
              eolist.insert(9);
              eolist.insert(4);
              eolist.insert(3);
              eolist.insert(2);
              eolist.insert(5);
              eolist.print();
              System.out.println("print Even:");
              eolist.printEven();
              System.out.println("print Odd:");
              eolist.printOdd();
              eolist.delete(9);
              eolist.delete(1);
              System.out.println("list after delete 9, 1:");     
              eolist.print();
              System.out.print("execute isMemeber(3): ");
              System.out.println(eolist.isMember(3));
              time2 = System.currentTimeMillis();
    System.out.println("The starting time: " + time1 +
    +
                        " milli seconds.");
              System.out.println("The ending time: " + time2 +
                        " milli seconds.");
    Answer the following questions based on the output of
    your code:
    1. Calculate the time spent to execute your program
    based on the value of time1 and time2; you need write
    your formula first and then give the answer in
    millisecond.
    Answer:
    time2-time1
    time spent to execute your program = 0 millisec
    2. If we measure the time in terms of nanosecond, do
    you think we still get zero answer?
    Answer:
    3.What is your explanation for that?
    Answer:
    Pls help me in answering question 2 and 3. Thanks in
    advance.Hai Ram!
    Yeh homework mai hai.
    Akhela mai karo. (Do your own work).

  • How to dump block and identify the bytes stored for each column

    SQL> select header_file, header_block
    2 from dba_segments
    3 where segment_name = 'APARTMENTS';
    HEADER_FIL HEADER_BLO
    4 1692
    1 row selected.
    SQL> alter system dump datafile 4 block 1693;
    Statement processed.
    How can I see the dump block and identify the bytes stored for each column?
    tab 0, row 0, @0x73b
    tl: 125 fb: H-FL lb: 0x1 cc: 4
    col 0: [25]
    52 65 64 77 6f 6f 64 20 53 68 6f 72 65 73 20 41 70 61 72 74 6d 65 6e 74 73
    col 1: [20] 00 54 00 01 02 08 00 00 00 01 00 00 00 01 00 00 00 00 1b 8d
    col 2: [53]
    00 54 00 01 02 0c 00 00 00 01 00 00 00 01 00 00 00 00 1b 8e 00 21 09 00 00
    00 00 00 00 11 00 00 00 00 00 01 45 6d 65 72 67 65 6e 63 79 20 44 65 74 61
    69 6c 73
    col 3: [20] 00 54 00 01 01 08 00 00 00 01 00 00 00 01 00 00 00 00 1b 8f

    SQL> select header_file, header_block
    2 from dba_segments
    3 where segment_name = 'APARTMENTS';
    HEADER_FIL HEADER_BLO
    4 1692
    1 row selected.
    SQL> alter system dump datafile 4 block 1693;
    Statement processed.
    How can I see the dump block and identify the bytes stored for each column?
    tab 0, row 0, @0x73b
    tl: 125 fb: H-FL lb: 0x1 cc: 4
    col 0: [25]
    52 65 64 77 6f 6f 64 20 53 68 6f 72 65 73 20 41 70 61 72 74 6d 65 6e 74 73
    col 1: [20] 00 54 00 01 02 08 00 00 00 01 00 00 00 01 00 00 00 00 1b 8d
    col 2: [53]
    00 54 00 01 02 0c 00 00 00 01 00 00 00 01 00 00 00 00 1b 8e 00 21 09 00 00
    00 00 00 00 11 00 00 00 00 00 01 45 6d 65 72 67 65 6e 63 79 20 44 65 74 61
    69 6c 73
    col 3: [20] 00 54 00 01 01 08 00 00 00 01 00 00 00 01 00 00 00 00 1b 8f

  • Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is network

    Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.

    Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
    According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
    Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
    Try what I suggest think to will help u

  • How to set expiry time for cached Subjects of authenticated proxy service.

    How to set expiry time for cached Subjects of authenticated proxy service in message level authentication.
    Because of this, password change does not effect immediatly in proxy invocation.
    I'm using Weblogic 10.3 and OSB3.0

    Hi,
    You can activate Time-Dependent Publishing Service on your XML form and once the Lifetime of Documents is over then the document is not visible to users.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/c87d3cf8ff3934e10000000a11405a/frameset.htm
    It is only invisible but not deleted!
    So to delete all expired XML Forms you should run Scheduler Tasks for Time-Dependent Publishing:
    <b>TimeBasePublishingUnpublish</b>
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/bc37b5789dee4eaa8005bff84f14cf/frameset.htm
    You can also create your own Scheduler Task which deletes/archieves all expired XML Forms.
    Greetings,
    Praveen Gudapati
    [Points are welcome for helpful answers]

  • How to set the time difference between each data when sweeping voltage using keithley 2400

    Hello friends,
    I am using the sweep vi from Keithley in the SWEEP and Acquire measurement vi.I want to measure the voltage for every step and insert a delay in between every two data, so I need some delay between each I step.
    I am a starter to use Labview, thanks so much for your answers.
    Perry
    Solved!
    Go to Solution.
    Attachments:
    Keithley 24XX Sweep and Acquire Measurements.vi ‏26 KB

    As Dennis said, if you're using the built-in sweep function, you'll have to check the manual. See Section 10-16 (That's section 10 page 16, not sections 10 though 16) of the Keithley 2400 User Manual.
    The Keithley 24xx series has a measurement speed in units called PLC (Power Line Cycles). The default speed is 1PLC, meaning a measurement is taken every 1 power line cycle, or 1/60th of a second (16.67ms). 24XX's can go from 0.01 PLC (every 0.16ms) to 10 PLC (every 166.6ms). The faster you measure, the lower precision you get.
    To set this value programmatically, the command is
    ENSe:CURRent:NPLCycles <n>
    ENSe:VOLTage:NPLCycles <n>
    depending on what you're sensing and where <n> is the number of PLCs from 0.01 to 10.
    Another factor that will determine the time between data points is the SDM cycle. These are more complicated, look at your Keithley user manual for more information. Look at Section 6 and Section 11 for more info.
    Note:
    PLC times are based on a US cycle of 60Hz.

  • The time has come! Step up SharePoint 2010 Gurus! Your community needs heroes like you!

    TechNet Gurus... we salute you!
    You're awesome, and we know it!
    Your knowledge uploads and nifty info nuggets are our life blood at TechNet Wiki.
    Every awesome article that gets an award is just the start. We are building up the most sensational collection of gifts of knowledge from eminent community heavy weights and young guns alike. And we plan to promote you and your work wherever we can.
    Reputations are being forged.
    History is being made.
    Generations will know your name.
    Your children, grandchildren and great-grandchildren will marvel at your technical prowess.
    And now, my mighty code warriors, cool consultants and platform specialists, now your chance is here again.
    A new month of possibilities. Another chance to prove YOU are the ONE!
    The mighty TechNet Guru medal winner for June!
    Take up your mouse and keyboard!
    Unleash your mighty words of wisdom and bask in the glory that we bestow upon you!
    GO GO Gurus! Give, give, give!
    All you have to do is add an article to TechNet Wiki from your own specialist field. Something that fits into one of the categories listed on the submissions page. Copy in your own blog posts, a forum solution, a white paper, or just something
    you had to solve for your own day's work today.
    Drop us some nifty knowledge, or superb snippets, and become MICROSOFT TECHNOLOGY GURU OF THE MONTH!
    This is an official Microsoft TechNet recognition, where people such as yourselves can truly get noticed!
    HOW TO WIN
    1) Please copy over your Microsoft technical solutions and revelations to
    TechNet Wiki.
    2) Add a link to it on
    THIS WIKI COMPETITION PAGE (so we know you've contributed)
    3) Every month, we will highlight your contributions, and select a "Guru of the Month" in each technology.
    If you win, we will sing your praises in blogs and forums, similar to the
    weekly contributor awards. Once "on our radar" and making your mark, you will probably be
    interviewed for your greatness, and maybe eventually even invited into other inner TechNet/MSDN circles!
    Winning this award in your favoured technology will help us learn the active members in each community.
    Feel free to ask any questions below.
    More about TechNet Guru Awards
    Submit now :
    http://social.technet.microsoft.com/wiki/contents/articles/24692.technet-guru-contributions-for-june-2014.aspx
    Thanks in advance!
    Pete Laker
    #PEJL
    Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to the one and only
    TechNet Wiki, for future generations to benefit from! You'll never get archived again!
    If you are a member of any user groups, please make sure you list them in the
    Microsoft User Groups Portal. Microsoft are trying to help promote your groups, and collating them here is the first step.

    Up to 3 articles now:
    Social Data Timer
    Job is not running, Recycle warning in progress, job will not be run immediately by Waqas Sarwar
    SharePoint Online : Working with People
    Search and User Profiles by Geetanjali Arora
    Creating
    Bookmarks in Wiki Pages - SharePoint Rich Text Editor Extension by Jaydeep Mungalpara 
    And 3 days to go!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Reading the output values after each step executes in LabVIEW User Interface

    Hello all,
    Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
    Problem: is there a way to execute the subsequent steps programatically and get the output values from each of them?
    I have already extended a little bit a Full OI interface for TestStand to load up any sequence, choose some of the steps and run them step by step (something like option to Run Selected steps). What I am trying to do is to add some actions between each step and do that in User Interface (I can't modify the sequence!), so I am starting the NewExecution with some previously configured InteractiveArgsParam and set an option breakAtFirstStep to True. Afterwards I am just doing something like Step Over when debugging the sequence and this works good, but I didn't fine a way yet to read the output values from the steps...
    Then, if I wait until the execution finishes I can read my Results by processing the ResultObject, but this works only after finalizing of the test sequence. Since I wanted to stop after each step, read the values, do some actions and continue to the next step I tried to register an event callback for Trace of Execution View Manager. I can see that after each executed step this event is triggered, but when I try to read a ResultObject returned in Event Data it is not filled with values (ResultList seems to be empty?). Is it a proper behaviour or maybe I am doing the readout in wrong way? (It is the same VI as for reading ResultObjects after sequence finishes and there it works fine for arrays, containers and other data types).
    Like I mentioned I can't modify the Test sequences, I can't add a UImessages.
    What are my options? Should the trace event returns all output values from each steps or is it just used for status checking? Or maybe there is completely different approach to that matter?
    Thanks in advance for any suggestions,
    Best Regards.
    CLA, CTD, CLED @ Test & Measurements Solutions Poland
    Solved!
    Go to Solution.

    Thanks for your replay, I have tried to build it in my LabView Block Diagramm, es seems like this image.
    But the variable GetNumSubProperties ist always 0. Why?
    PS: I need only the variable "Step.Result.PassFail" from the last step, do you know, how can I get it? I think, it is maybe easier than read all the "Result".
    Attachments:
    ReadStepResultInLabview.JPG ‏39 KB

  • How to identify the times that a item appears in a report.

    Hi community,
    Let me explain the scenario.
    We have developed several reports for its use by the several users of the company. So, we have reports for Management, Administration, Commercials and our Production Users. Let's focus in last ones. Several reports shows the production of our semi-elaborated and elaborated products and the stock of the components needed to build those semi-elaborated and elaborated products.
    Our Production users, wants to know how to include a calculated column that shows the times that an item appears in the report (or if there is a way to show in the report, how many times an item appears in it).
    We have just trried to create a calculated column including in it the COUNT_DISTINCT function (using its both expressions), but we do not understand all the parameters.
    So can anyone in the community help us?
    Thanks in advance for your help and assistance.
    Luis.

    Hi,
    It all depends on what information you have in your report and what data items are available in the database.
    If you have a grouped report (group sort) so that you have one line for each product, then you can use COUNT_DISTINCT(item_id) as a grouped function. This will give you the number of different not null item_id's found in the group.
    However, if your report is not grouped by product, so for example, you have many component lines for each product but you want to show one figure for all the product components lines then you need to use COUNT_DISTINCT(item_id) as an analytic function. The COUNT_DISTINCT(item_id) OVER (PARTITION BY product_id) will give you the number of not null item_id's for each product_id in the report.
    If you have the time when an item is added to the database then you may want to use the group function MIN(time_of_item) to show the earliest time in the report.
    Rod West

  • ICal Week view, Date is not aligned with the Time(schedule) of each date

    Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

    Hi,
    i omit the scheduling maergin key in material master,
    the result of MRP is
    BASIC DATES
    Finish 15.10.2009
    Start 14.10.2009
    PRODUCTION DATES
    15.02.2010 14:33:25
    14.10.2009 07:00:00
    scheduling type i planned order is still "backwards"
    so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
    this seem not right.
    it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
    Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
    Best regards,
    Freddy Ha
    Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

  • So I have an iPad 2 for two years. Has never been dropped or in water or damaged in any way....now the volume is distorted and I get booted off the web all the time. Plus it shows and no service in top left corner. Any one have these issues?

    So I got is iPad as a gift and the same issues I had with my iPhone 4S is also happening with my iPad. Will Apple cover the problem as it lies within there updates or something. All I know I have taken perfect care of both products and volume is distorted. Can't listen to music, I get booted off the web all the time, I can't even chat with Apple icare it won't work and no service shows on top left corner. What is wrong with Apple products? I'm thinking it's time to switch! I've had to change my iPhone twice now......first time for mic not working and then camera shutter kept sticking. Same on my iPad........ I don't want to pay to get this fixed as it's not my fault this is happening...... It's software apparently?

    This really is starting to feel like a hardware issue than a software one.
    Especially if hearing noises when you connecting up your iPad for charging.
    Something happened to your iPad that has nothing to do with a software update.
    This is why I recommend that
    I can't help you any farther.
    It sounds as if you really need to take this iPad in for a repair.
    Since you are reluctant to do this, there is nothing more I can suggest to you.
    Good Luck on whatever you decide to do.

  • Reset the HTTP response code in OSB for proxy service

    Hi,
    I created a HTTP proxy service in ALSB with any XML message option. There are some business scnearios for which i need to send a custom error message in the HTTP body. I am replacing the $body variable with the error message and sending reply with success.As i am using reply with success it sends a HTTP response status code as 200 Ok.
    However based on different error conditions i want to send appropraite http response code. How can this be achieved?

    I would like to share the solution so that it would be useful to all the users of the forum.
    There is a http:http-response-code element in the $inbound variable which is optional element. You need to insert this element to the $inbound using the insert action. Here is the extract of the code:
    Insert [<http:http-response-code>401</http:http-response-code>] [ as last child of ] [./con:transport/con:response] in [inbound]
    Please note namespace con belongs to "http://www.bea.com/wli/sb/context".
    Edited by: [email protected] on Aug 12, 2009 10:47 PM

  • Need to find the time spent based on condition

    Post Author: EarthMover
    CA Forum: Formula
    Employee Name   Problem Description         Condition   Time                        
    Alder, Harrison     10W Hydraulic Tanker       ACUP       2/18/2008 1:34:46PM
    Alder, Harrison     10W Hydraulic Tanker       COMP      2/18/2008 1:59:37PM
    Here's the skinny, for every ticket that goes into the system, there are two time stamps attached to that ticket. 
    1. is when the ticket was signed on to and became active ( ACUP or ACDN )
    2. is when the ticket was signed off or completed ( COMP, COUP,CODN,MSDN,MSUP,PTDN,PTUP,SMUP,SMDN ) all of these are possible sign off conditions.
    I need a way to find the difference in time between these two time stamps either based on the condition or if there is another way that would work, I am completely open to suggestions.

    Post Author: V361
    CA Forum: Formula
    Do your times always fall in the same day ?

Maybe you are looking for