Fill blank cells in power query from the cell above
Is it possible in Power Query to fill blank
In excel I can choose them by using "go to special" > "blanks" dialogue, and using referrence like "=R-1C"
Is it possible to fill this blank cells with value of cell above if Import this file in power query?
Thank you
I am using Power Query preview Version: 2.9.3547.162 and there is a 'Fill Down' command in the transform section that does just that.
Bertrand
Similar Messages
-
Problem of running the jump query from the result line
Dear expert,
I have a problem when running a jump query from the result line. Apparently, the values of the caracteristics haven't been sent to the jump target. However, the configuration in RSBBS seems to be good as the jump works well from the other lines.
Does anyone have some ideas on that?
Thanks in advance!Hi,
If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
Hth,
-Jacob -
Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?
When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT -
Query from the data abse and pass values to a pdf form
query from the data abse and pass values to a pdf form
Hello
Hello i have this html report that i have written to output a
report.
now, i am assigned to pass the same fields to a pdf form so
the fields in the adaobe form can be populated or the term
Pre-populate the form.
can anyone help me get started.
first i would like to know if it can be done.
second, what do i need to get started (tools )
third how do i do this.
i am really lost at this point.
can anyone give me tips in how to approach this
subject??It can be one using Adobe Acrobat Designer which is packaged
with Acrobat
Professional Pro 7. It uses all XML to create and populate
forms.
If you had the time, you can also create <cfdocument
type="pdf"> to have
them ready and just pass the info to it so it autogenerates
the PDF on the
fly. -
How to query from the xml table a single, specified element.
I'm quite new in Xml Db. Pleas, can anybody tell me how to query from the xml table below a single element (i.e. the element 'rapportoparentela = NIPOTE' related to the element 'codicefiscale = CRRVNC76R52G337R', or the element 'rapportoparentela = FIGLIO' related to the element 'codicefiscale = CRRRNT51L23G337Q')?
- <dati xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<codiceinterno />
<codicefiscaleassistito>CRRMNL81R31G337H</codicefiscaleassistito>
- <famigliare>
<codicefiscale>CRRVNC76R52G337R</codicefiscale>
<rapportoparentela>NIPOTE</rapportoparentela>
</famigliare>
- <famigliare>
<codicefiscale>CRRRNT51L23G337Q</codicefiscale>
<rapportoparentela>FIGLIO</rapportoparentela>
</famigliare>
- <famigliare>
<codicefiscale>CBRPRN15S65E080W</codicefiscale>
<rapportoparentela>I.S.</rapportoparentela>
</famigliare>
- <famigliare>
<codicefiscale>CRRMNL81R31G337H</codicefiscale>
<rapportoparentela>NIPOTE</rapportoparentela>
</famigliare>
- <famigliare>
<codicefiscale>BCCCML54C50I845G</codicefiscale>
<rapportoparentela>NUORA</rapportoparentela>
</famigliare>
</dati>
Using SELECT extractValue(value(t),'/rapportoparentela') into result FROM NF_XMLT X,
TABLE ( xmlsequence (extract(value(X),'/dati/famigliare/rapportoparentela'))) t
I get all the elements 'rapportoparentela' and I want to get only one specified.
Regards.
PieroPiero,
you can add the condition "CRRVNC76R52G337R" to your xpath-expression like:
SELECT extractValue(value(t),'/rapportoparentela')
FROM NF_XMLT x
,TABLE ( xmlsequence (extract(value(X),'/dati/famigliare[rapportoparentela="CRRVNC76R52G337R"]'))) tto select only those famigliare-elements that have a child-element rapportoparentela with value "CRRVNC76R52G337R".
When you stored your XML in an XMLType column in the table, i think the following queries are better:
SELECT extractValue(x.your_XMLType_column,'/dati/famigliare/rapportoparentela')
FROM NF_XMLT x
WHERE extractValue(x.your_XMLType_column,'/dati/famigliare/codicefiscale')
= 'CRRVNC76R52G337R'or
SELECT extractValue(x.your_XMLType_column,'/dati/famigliare/rapportoparentela')
FROM NF_XMLT x
WHERE existsNode(x.your_XMLType_column,'/dati/famigliare[codicefiscale="CRRVNC76R52G337R"]')
!= 0 -
What is this blank dialog box that extends from the address bar?
I just downloaded the Aol version of Firefox and this blank dialog box drops down from the address bar. I am then unable to do anything with the page.
What do I do to get rid of this thing?Disable the AOL add-on until AOL fixes it.
-
To Find the SAP Query from the tranaction code or the program name
Hi,
I have a situation wherein I have to modify the sap query associated with an transaction code.But the problem is that I am unable to find the SAP Query.
<b>Please let me know how to find the SAP query from the transaction code or the program name.</b>
Thanks and Regards,
RupeshHi Rupesh,
1 use FM
RSAQ_DECODE_REPORT_NAME
2. This is one of the best and easiest way.
3. It will provide u the following info.
WORKSPACE
USERGROUP
QUERY
CLIENT
4. Thru TCode U must know the program name first.
This can be discovered using SE93.
Hope it helps.
Regards,
Amit M. -
How to Launch a Query from the Easy Access Menu
Hello Experts,
Once I have created, saved and tested my query how can I set it up so that my users can either type in a transaction at the Easy Access Menu or select my query from the Easy Access Menu and launch the query input screen that displays fields for:
Reporting Period
Selection Criteria - Personnel Number, Employment Status, Personnel Area etc.
Program Selections - company code
Output Format
Thanks.
Regards,
JeanetteHello Jeanette
You may refer to following thread
Assign transaction code to SAP Query (created via SQ01)
Hope this helps
Best Regards
Reddy -
How to remove the DATA Provider(Query) from the WAD 3.5
Hi,
I want to remove the unused dataprovider(query) from the WAD 3.5,
How to delete the dataprovider.
Please suggest hereGo to HTML tab. You will see all the data providers on top. You can delete the unused ones there.
-
HT3964 how do I unplug the round power cord from the back of my IMac?
how do i unplug the round power cord from the back of my IMac?
Switch off the mains
For extra safty take the plug out of mains
Remove the powercord perpendicular to the iMac.
Moderate constant force
Don't use tools as correctly mentioned by seventy one
Best Wishes,
AK -
I have a spreadsheet given to me that is a list. Column A is a nominal or catergorical variable (imagine something like "Nationality") and column B is a ratio variable (imagine something like "height").
Unfortunately not all of the rows have data filled out column A. The issue is identical to the one presented here in MS Excel: http://www.contextures.com/xlDataEntry02.html
I would like to calculate averages for the subgroups in column A. I could do this manually be selecting each range of data in column B, but with thousands of cells and many subcategories, it would take a long time. From what I can see Numbers "categories" function won't work as I would like if there are blank cells, so it seems I would need to fill in the blank data, to make a proper nominalised database list. Rather than do this manually with manual fills, is there a way to do it programatically? I can't manage the trick for MS Excel in the aforementioned website, as Numbers only allows filtering for blank cells, rather than selecting blank cells.
I hope someone can help.And now, the script :
--[SCRIPT fillblankcells]
Enregistrer le script en tant que Script : fillblankcells.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dans la colonne à compléter.
menu Scripts > Numbers > fillblankcells
Si une cellule de la colonne est vide, le script l'alimente avec le contenu de la dernière cellule remplie qui la précéde.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: fillblankcells.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell in the column to fill.
menu Scripts > Numbers > fillblankcells
The script will fill every blank cell of this column with the contents of the preceeding filled cell.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
--=====
Yvan KOENIG (VALLAURIS, France)
2010/04/05
--=====
on run
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName to tell column colNum1
set maybe to ""
repeat with r from 2 to count of row
if not (value of cell r) = 0 then
set maybe to value of cell r
else
set value of cell r to maybe
end if
end repeat
end tell
end run
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errmsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errmsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errmsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) lundi 5 avril 2010 14:37:02 -
C# : Get Column name for an Insert Query from The Selected GridView Row.
Hi Guys, I am trying to insert data in an SQL table by executing an Insert Query.
The problem is that I need to get the column name from a cell in the selected gridview Row.
Here's the snippet:
SqlCommand cmd30 = new SqlCommand("insert into mytable ( '"+GridView7.SelectedRow.Cells[0].Text+"' , r_id) values ('"+ GridView7.SelectedRow.Cells[1].Text +"', '"+TextBox1.Text+"')",con30);
cmd30.ExecuteNonQuery();
**r_id is not a Primary Key.
The Error is get is:
Incorrect syntax near 'r_id'.
Any Help will be appreciated.
Thanks,
Shaleen
TheHexLordHi TheShaleen,
Like your title mentioned.GridView control is a web class.This forum is to discuss problems of C# development. Your question is not related to the topic of this forum.
You'll need to post it in the dedicated ASP.Net Forum for more efficient responses, where you can contact ASP.NET experts. Thanks for understanding.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to call a query from the backing bean ?
Hi all,
Another question for you guys :
I made a jspx page with an input form and a submit button.
When I click the submit button, the action my_action in my backing bean is executed.
This is the code :
public BindingContainer getBindings() {
return BindingContext.getCurrent().getCurrentBindingsEntry();
public String my_action() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("EmployeesView");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
I hoped that the query 'EmployeesView' was executed in this way, but I get the following exception :
java.lang.ClassCastException: oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding cannot be cast to oracle.binding.OperationBinding
So how should I execute the query EmployeesView ?
Second part of the question : What if I typed the name an employee in my form, and I want to
execute a query that selects all the Employees with that name ?
How do I make a query with a variable as input in the WHERE clause ?
Thanks in advance.
Edited by: Facehugger on 7-apr-2010 11:15I'm still trying all the stuff you guys says, but still no result.
This is my backing bean :
+// the button action+
+public String my_action() {+
+// get the selected rows from the multiselect table and store the objectid's in an String array+
RowKeySet rks = graph_table.getSelectedRowKeys();
Iterator itr = rks.iterator();
Object key;
int nbr_objects = 0 , i = 0;
if (rks.size()>0) nbr_objects = rks.size();
+String[] objectid = new String[nbr_objects];+
while(itr.hasNext())
+{+
key = itr.next();
graph_table.setRowKey(key);
Object o = graph_table.getRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding) o;
Row row = rowData.getRow();
+objectid[i] = row.getAttribute("Objectid").toString();+
i+;+
+}+
+// now get all the x and y values for these objectid's from the database out of the table history.+
BindingContainer bc = BindingContext.getCurrent().getCurrentBindingsEntry();
for (int j=0 ; j<nbr_objects; j+){+
+// get X and Y values for object number j+
DataPoints history = new DataPoints();
OperationBinding operationBinding = bc.getOperationBinding("retrieveHistory"); ===> operationBinding stays NULL ???+
+operationBinding.getParamsMap().put("OBJECTID", objectid[j]);+
Object retVal = operationBinding.execute();
+// ==> retVal should contain a List of all X and Y values for the provided objectid.+
+// while (retVal has values)+
+// {+
+// List_of_x_values.add(retVal.valueX);+
+// List_of_y_values.add(retVal.valueY);+
+// }+
history.add(List_of_x_values);
history.add(List_of_y_values):
+// call the soap method to do some calculations+
methodname.forecast(history);
+}+
+}+
In my application module :
public void retrieveHistory(String objectid) {
getHistory().setWhereClause("OBJECTID = '" + objectid + "'");
System.out.println("current query : "+getHistory().getQuery());
getHistory().executeQuery();
public ViewObjectImpl getHistory() {+
return (ViewObjectImpl)findViewObject("History");+
The query for the VO History : SELECT * FROM HISTORY
Please anyone ?
Edited by: Facehugger on 9-apr-2010 14:19 -
Good day
Everytime I want to pull data into a query from our servers it gives the error "DataSource.Error: Arithmetic operation resulted in an overflow". What is the reason for this error, and how do I get past this bump.
Thanks in advance
ArnouxHey Tristan. Thanks I did that yes.
For some reason my direct MySQL connection does not want to work.
I get the following error
DataSource.Error: MySQL: Unable to find a database provider with invariant name 'MySql.Data.MySqlClient'.
This error may have been the result of provider-specific client software being required but missing on this computer. To download client software for this provider, visit the following site and choose at minimum 'MySQL Connector/Net': -
I have an admin approved InfoPath 2010 form that is web enabled. It is published to a SharePoint 2010 Forms library and an Approval Workflow is attached to it.
The form needs to open up in the InfoPath Filler with the Workflow Task bar at the top so users can approve the task from within the form and not go to Tasks list to do so.
Here's a problem I am experiencing: sometimes the form opens in InfoPath Filler and sometiems it opens in the browser when the link to approve the form is clicked form the email that is sent by the workflow.
Windows 7, IE 9, MS Office 2010:
The form opens up in InfoPath filler like it supposed to. The Workflow task bar is there for users to approve the form.
Surface Pro with Windows 8.1, IE 11 and MS Office 2013
The form opens up in the browser and there is no Workflow task bar at the top.
Things that I've already looked at and tried which didn't solve the issue:
- The forms library is exclusivly set to open documents/forms in the Client Application
- Set the browser compatibility mode in IE 11, that doesn't work too well, because you have to do it every time you open the browser.
- Setting browser compatility in IE 11 reintroduced another issue, of multiple login promts, which was fixed by entering the SharePoint site in question into the Trusted sites by a group policy. Adding the site to trusted sites made the forms open up in the
browser.
- Researched compatibility issues with InfoPath and Windows 8.1, cannot find anything.
- Researched compatibility issues with InfoPath 2010, Windows 8.1 and SharePoint 2010, also didn't find anything.
Can someone offer a suggestion on how to fix this problem, preferably with no code, because we are not allowed to put custom code on the server?
I need to force InfoPath form to open in InfoPath Filler when the link to the form is clicked from the Workflow email. Also the login prompts should not pop up. Need it to work on all the platforms: Windows 7, and Surface Pro Windows 8.1.
Thank you.Hi,
Thank you for your response.
[Steps about how to capture the capture the fiddler log]
===========================================
1. Download fiddler from
http://fiddler2.com/
2. Install fiddler and launch fiddler.
3. When the fiddler be launched, the log will be enabled automatically.
4. You can click “X” to remove all the records before you reproduce the issue.
5. If the web site has been configured to https. Please enable https option:
Click “Tools” -> “Fiddler Options”
Switch to HTTPS tab, then check “Capture HTTPS CONNECTs” and “Decrypt HTTPS traffic”.
6. Then repro the issue.
7. Click “File”->”Capture Traffic”, uncheck the Option “Capture Traffic” to make sure the “
” is not shown, that mean the logs has been stopped.
8. Click “File”->”Save” ->”All sessions”, save the file.
Any quesitons, please let me know.
Best Regards,
Dats Luo
Maybe you are looking for
-
Adobe Acrobat Profesional Cannot Be Launched At This Time
I keep getting the following error message, Adobe Acrobat 8 Professional cannot be launched at this time. You must launch atleast one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional Any ideas?
-
How to embed a screenshot into a topic post/topic reply.
Hi all, I wasn't sure which forum to post my question in, so since all my Discussions stuff opens in a browser window, I thought it might as well be in the Safari forum. My query is two-fold: 1. How do I embed a screenshot into a reply so that the sc
-
Slow to convert Oracle 11g XMLType into Java String or Document
After retrieving a result set from an Oracle 11g database, it takes roughly 75 seconds to convert the XMLType (this is a structured XML Storage, registered with an xsd) into either a java String or Document. I'm using Java 1.6, have the xdb.jar and x
-
Serial number macromedia studio mx
Hallo, ich versuche meine Adobe CS5 auf dem neuen Computer unter Yosemite zu installieren. Ich habe dafür die Seriennummer angegeben und die stimmt. Da es sich nur um ein Upgrade handelt, muss ich auch die Seriennummer von der "Vorversion" angeben. D
-
MMy iPad mini says that I am not connected to the internet even when I am. The message I get is that the server cannot be found because I am not connected.