Problem of running the jump query from the result line
Dear expert,
I have a problem when running a jump query from the result line. Apparently, the values of the caracteristics haven't been sent to the jump target. However, the configuration in RSBBS seems to be good as the jump works well from the other lines.
Does anyone have some ideas on that?
Thanks in advance!
Hi,
If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
Hth,
-Jacob
Similar Messages
-
Problem with running the midlet class (Error with Installation suite )
hi everyone...
i have problem with running the midlet class(BluetoothChatMIDlet.java)
it keep showing me the same kind of error in the output pane of netbeans...
which is:
Installing suite from: http://127.0.0.1:49296/Chat.jad
[WARN] [rms ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
i also did some research on this but due to lack of forum that discussing about this,im end up no where..
from my research i also find out that some of the developer make a changes in class properties..
where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
i did that but also didnt work out..
could any1 teach me how to fix it...
thanx in advance... :)actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen.. -
How to run a BI query from SSM
HI,
My client would like to drill down to a BI query where the starting point is a KPI.
For eg, we have a KPI "Turnover". When we are at kpi detailed level for a specific period, we would like to run a query to have detailed information for turnover (we dont want to use report functionnality of SSM).
We are using SSM 7.5 and BW queries as data provider.
Is there a way to achieve this ? (web service ? )
Thanks in adavnceJacques,
You cannot run a BI Query from the end user interface of SSM. Your alternatives are to create an associated report inside SSM or use an Associated Link in the KPI Details section.
Right above the graphing on the KPI detail page there is the link Create Associated Report. SSM has some template reports and allows users to put together a report based on available SSM data.
There is also the possibility of using Associated Links on the KPI detail page to point the user via a url to another reporting application, though it would not bring that data with it.
Regards,
Bob -
BAPI to export features of Exceptions and Jump query from BW system to othe
Is there any BAPI is available to export features of Exceptions and Jump query from BW system to other SAP or Non SAP system, whereas won't need to re-define Exceptions and Jump Query. I mean directly export features of Exceptions and Jump query from BW system to other system.
Thanks,
RohanThanks for quick response.
I am working on Hyperion, they are using essbase, and Integration connector to connet BW directly and takes data from BW System.They have features to define Exceptions(Traffic Light) and Jump query in the Hyperion side. But now they want to import directly features of Exceptions(Traffic light) and Jump query from BW System(using BAPI) instead of defining Exceptions and Jump Query in the Hyperion side.
Please help me on this.
Thanks,
Rohan -
After I clicked and downloaded the newest version of itunes I no longer am able to connect with the store. I get an error (-32-12) and it says to check the connectivity. The problem is with the on line connection. I attempted to reload itunes , still the same problem exists.
... and that's a new one that I wasn't expecting ...
Okay ... lets try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
How to show only the result line of a Query result ?
Hi Experts,
I want to show only the result line of the Query. Is this possible in query Designer ?
In BeX Workbook, I can hide the rows but they grow or shrink dynamically and hence it is unpredictable how many rows to suppress.
If you have any solutions/workarounds, please reply !
RekhaVBA coding can be used to display just the Result rows.
Somthing like this - modify as needed.
This scans the range of query results looking to find the last row, then checks those rows to see if the word Result is found or not, deleting (or you could just hide) the detail rows. There is also a LEAF option in BEx Boolean options that returns a 1 or 0 depending on whether a row is a detail or result that could also be used to hide rows rather than looking for the presence of "Result" in a particular column
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
For rownum = 17 To 64000 Step 1
' col 2 is the Total Result, col 3 is the User Group result
If Cells(rownum, 2) = "" And Cells(rownum, 3) = "" Then
lastrow = rownum - 1
Exit For
End If
Next
For rownum = lastrow To 17 Step -1
If Cells(rownum, 2) = "Result" Or Cells(rownum, 3) = "Result" Then
Rows(rownum).Hidden = False
Else
' Rows(rownum).Hidden = True
Rows(rownum).EntireRow.Delete
End If
Next
End Sub -
How to Use the 'Result' line to caculate a special value?
Hi experts:
For example,the dimension is product (a ,b c ,d),and key figure is revenue,
then I want to show the value -->the percentage of the revenue of each product .
so that's the problem , how I can get it,or how i can get the sum of all products.
can I get it from the result line or is there a better way to get it?
thx
chankeep your Product in Rows, Revenue in Colomns.
You can get Sum of each Product Revenue by settings Product Charecterstic Properties.
Coming to % Share of Revenue for each product. Create a Calculated KF or Formula in Colomns. In the Formula or CKF definition screen, you can see Percentage Functions along with Mathemetical Functions. Select % Share of Over all Result (%GT) under Percentage Functions .
Take a look into this link if you have any Questions.<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e2/16f13a2f160f28e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/e2/16f13a2f160f28e10000000a114084/content.htm</a>
Hope this helps.
Nagesh Ganisetti.
Assign points if it helps. -
How to keep the Result Line only and delete the details
Hello
I am having a Bex issue, i have the details lines and the Result Line, i would like when i run my report, i keep only the Result Line and hide all the details
can any one help?go to Properties of Keyfigure and set 'Calculate <u>Single</u> Values as....' to 'Suppress Result'..
-
What is the color number in HTML of the result line in the web reports
Hi guys,
what is the color number in HTML of the result line in the web reports, its like a yellow, but i m looking for the exactly number color to make some modifications, pleasethe same should correspond to a CSS class definition. You execute the report - view source and ideally you should be able to find the class associated with the result cells. You can also go an check out the CSS directly.
-
Problem to run the Crystal report inside from SAP B1 based on SQL views.
Hello,
I have a problem to run my Crystal report inside from SAP B1 which is based on SQL views.And the SQL views are stored in a separate database in SQL server.The error which i am getting is saying the the tablename does not exist.What i need to do in order to sort this problem.
Great if somebody can help me to sort out this so that i can run my report based on SQL views stored on separate database other than SAP databases inside from SAP B1.
Edited by: rozenagrawal on Apr 19, 2011 11:51 AMTry using a SQL synonym in your company database for the views outside the company database. I don't know if SBO will let you get away with it, but its worth a shot.
If your company database is MyCompany and you have a view called MyView in Views database, assuming the view belongs to schema dbo, and you want the synonym to belong to dbo schema in your company database, run this:
Use MyCompany
go
create synonym dbo.OutsiderView for
Views.dbo.MyView
go
select * from OutsiderView
The select statement should return the contents of MyView in the Views database while you are connected to your MyCompany database.
For more info, see the Books Online for MSSQL on topic synonym.
You will need to change your CR options to include displaying synonyms along with tables, views, etc. You may also need to grant select to B1 users.
Edited by: Cindy Lange on Apr 21, 2011 4:00 PM -
Problem while running the report from stored procedure
Hi,
I using stored procedure to generate my report.
my stored procedure's code looks like this.
CREATE OR REPLACE PROCEDURE PROJECTOVERVIEWREPORT1(query in VARCHAR2)
IS
myPlist SRW_PARAMLIST;
myIdent SRW.Job_Ident;
myStatus SRW.Status_Record;
BEGIN
srw.start_Debugging;
myPlist := SRW_PARAMLIST(SRW_PARAMETER('',''));
srw.add_parameter(myPlist,'GATEWAY','http://localhost:8888/reports/rwservlet');
srw.add_parameter(myPlist,'SERVER','rep_kalyan1');
srw.add_parameter(myPlist,'REPORT','BillFormat.RDF');
srw.add_parameter(myPlist,'USERID','atl3_dev_jul04/atl3_dev_jul04@mgi');
srw.add_parameter(myPlist,'destype','file');
srw.add_parameter(myPlist,'desformat','pdf');
srw.add_parameter(myPlist,'documentnumber','17181');
srw.add_parameter(myPlist,'papertype','N');
srw.add_parameter(myPlist,'desname','c:\temp\17181.pdf');
myIdent := srw.run_report(myPlist);
myStatus := srw.report_status(myIdent);
srw.stop_Debugging;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
NULL;
END PROJECTOVERVIEWREPORT1;
Iam running the oc4j instance and the report server in my local machine.
when i have typed http://localhost:8888/reports/rwservlet
Iam able to see the help page.
My rdf file is placed in OralceHome/reports/integ folder.
Iam executing my stored procedure it is returning some error.
Iam doing any thing wrong.
Do i need to modify anything.
Is the place of rdf file correct.
plz help me solving the above problem.
--KalyanThis is the error message iam getting..
any idea????
* WELCOME TO EVENT-BASED-REPORTING API *
* API-Version : 9i *
* (C) Oracle Corporation, 2000 *
* Debugging turned ON *************************************
*** Length of Paramlist : 1
OK : Parameter added : GATEWAY=http://localhost:8888/reports/rwservlet
*** Length of Paramlist : 2
OK : Parameter added : SERVER=rep_kalyan1
*** Length of Paramlist : 3
OK : Parameter added : REPORT=BillFormat.RDF
*** Length of Paramlist : 4
OK : Parameter added : USERID=atl3_dev_jul04/atl3_dev_jul04@mgi
*** Length of Paramlist : 5
OK : Parameter added : DESTYPE=file
*** Length of Paramlist : 6
OK : Parameter added : DESFORMAT=pdf
*** Length of Paramlist : 7
OK : Parameter added : DOCUMENTNUMBER=17181
*** Length of Paramlist : 8
OK : Parameter added : PAPERTYPE=N
*** Length of Paramlist : 9
OK : Parameter added : DESNAME=c:\temp\17181.pdf
Starting run_report: building url
*** Building URL (RUN_REPORT)
OK : URL built : http://localhost:8888/reports/rwservlet?SERVER=rep%5Fkalyan1&REPORT=BillFormat%2ERDF&USERID=atl3%5Fdev%5Fjul04%2Fatl3%5Fdev%5Fjul04%40mgi&DESTYPE=file&DESFORMAT=pdf&DOCUMENTNUMBER=17181&PAPERTYPE=N&DESNAME=c%3A%5Ctemp%5C17181%2Epdf&statu
*** Submitting HTTP Request
*** using URL :http://localhost:8888/reports/rwservlet?SERVER=rep%5Fkalyan1&REPORT=BillFormat%2ERDF&USERID=atl3%5Fdev%5Fjul04%2Fatl3%5Fdev%5Fjul04%40mgi&DESTYPE=file&DESFORMAT=pdf&DOCUMENTNUMBER=17181&PAPERTYPE=N&DESNAME=c%3A%5Ctemp%5C17181%2Epdf&statusf
ERROR : HTTP request failed -
Problem in running the query on ODS
Hi All,
I have been trying to run the query which consists of only 25 fields and doen't contain much calculations and routines and trying to restrict even 7000 records.
That too result in system failure reporting on storage parameters somtimes giving dump as well.
Could you please suggest me the solution for this as this is urgent requirement.
Thanks
SuryamHi,
Are you using a filter / restrictions in the query,if So create a Secondary index which can be suitable(same order) to this filterations/restrictions.
You can find the order in where cluase in the sql statement used in the query execution.you can see it in SM50.
With rgds,
Anil Kumar Sharma .P -
Problem while running the report from a form
Hi,
I am able to call a report from forms9i using run_report_object. This report just has a boilertext within it. I did this just to check the functionality of run_report_object built-in. This worked perfectly.
But when I am trying to call a report based on emp table from the form, it gives me error saying that it cannot run the report.
Can anyone please help me.
Thanks
NarainHi Ino Laurensse ,
Thanks for the response.
The error code and message is as follows
frm-41214 Unable to run report.
I am able to call from forms9i a report with some boilertext but not a report accessing the database. Thro' out I have never changed the username.
The following are the changes I made
In the rwservlet.properties
I specified the
reportserver name = repsrv ( I created it and started from the services)
singlesignon = no
I am able to run the report which is accessing the emp table from the report builder with the same user as the one which I am using in forms, but, the same I am not able to call from forms.
thanks
Narain -
Problem with running a java program from the command line
I have this code:
package pkg;
import jxl.*;
import java.io.File;
public class TestClass {
public static void main(String[] args) {
try{
Workbook book = Workbook.getWorkbook(new File("d:/testWorkspace/excFile.xls"));
Sheet sheet = book.getSheet(0);
String s=sheet.getCell(4, 2).getContents();
System.out.println(s);
}catch (Exception e){System.err.println(e);}
}I've wrote it in Eclipse, added jxl.jar to the buildpath, and it works fine.
Then I tried to run it from the command line and I did it like this:
D:\testWorkspace\testProject\bin> java -cp \jxl.jar pkg.TestClassThe result was:
Exception in thread "main" java.lang.NoClassDefFoundError: pkg/TestClass
Caused by: java.lang.ClassNotFoundException: pkg.TestClass
...but the file TestClass.class DOES exist in the folder d:\testWorkspace\testProject\bin\pkg\ and the file jxl.jar IS on the root of drive D (like I already wrote, it worked fine inside the Eclipse).
So, my question is: How to run this code from the command line?
I have no idea what went wrong.
Can someone help me, please?The current directory is not implied in the classpath.
D:\testWorkspace\testProject\bin> java -cp .;d:\ pkg.TestClassor
D:\testWorkspace\testProject\bin> java -cp .;d:\jxl.jar pkg.TestClassI always forget which is right since I never work with jars... -
Problem in Running the Oracle Installer Remotely
Hi,
I installed the Oracle 10g on Enterprise Linux 4.5. The installer runs fine on the linux host successfully. And install the oracle software. Now I want to run Oracle installer remotely from my windows xp workstation but It is failing. Also I want to run DBCA remotely. But it also failed. Can anyone help me with this problem. On local linux machine every things works fine. I can run xclock as well locallay.
I need step by step instructions please. I am totally new in this.
I am using SSH connection to access my Linux box. ( I am using PuTTY ssh/telnet client).
Do I need to set any environment variable as linux user in my .bashrc file (Profile file). If so what is that.
Do I need to modify any file at Linux server for X forwarding. ( I am not at all familiar about X forwarding, how or when to configure it and why). If so what all things I need to do.
Any setting at my windows xp work station.
Any other recommended ssh/telnet client to use instead of PuTTY.
Many Thanks in Advance.
Asif
Message was edited by:
user575045Hi Madrid,
According to your instructions I started vncserver at Linux box. Now from my windows workstation I want to connect to linux. Can you recommend a good vnc client. I google and saw mostly vnc software is for windows. I tried TightVNC Viewer but I dont not connecting to the linux server. Once I provide the IP for Linux server It is giving me the errors that it could not find any vncserver. On linux I am running the vncserver. From my windows box I can ping the Linux server.
Any help or recomendation in this regard will be highly appreciated.
Thanks
__Asif
Maybe you are looking for
-
How to change delivery block for all item in the schedule lines via va32
dear sap expert: i onle can change delivery block for one sales order item in the schedule line every times via va32,it will take so many time because there are hundreds of item in a sceduling agrrement. how to change all the item one times. ple
-
Can I use LaCie Multimedia disk to see in TV, iTunes purchased movies?
Can I use LaCie Multimedia disk to see iTunes purchased movies in TV? I share files from iTunes in my local network by authorising 3 computers, but none of these have HDMI connection to TV. Can I use LaCie multimedia hard disk to store de movies from
-
I moved some pictures from my photo stream to an album in iPhoto. The photo stream icon didn't disappear and I can't edit the picture .
-
What problems should be expected after purchasing a macbook in america?
My friend is purchasing a Mac Book in the united states and then moving to england. Apart from the obvious need for a plug adapter, what other problems will he face? How might this affect the warranty or cover plan? Any advice would be appreciated! i
-
How to call transaction PC00_M10_CDTC from webdynpro?
Hi all, I am newbie to webdypro. I need a step by step guidance on this. I have come across a solution by Vishal Kapoor as followed. But I need more elaboration on the steps. 1: Call below method to get host, port and protocol cl_http_server=>if_http