Fill parameter for BAPI BAPI_ACC_STAT_KEY_FIG_POST with T.code 9KE5
Dear experts!
Now, I'm getting some issues about fill parameters for BAPI: BAPI_ACC_STAT_KEY_FIG_POST with t.code 9KE5.
Really, I want to perform the bapi with t.code 9KE5.
Help me, please!
Best regards, Huy!
Hi Huy
If you go to SE37 you have to set the following parameters to make it work:
1-For Parameter section, Doc Header you have to set:
CO_AREA 1000
DOCDATE 08.11.2011
POSTGDATE 08.11.2011
VERSION 0
DOC_NO
VARIANT
DOC_HDR_TX
USERNAME X1FREDRA
OBJ_KEY
OBJ_TYPE
OBJ_SYS
VAL_PERIOD 000
VAL_FISYEAR
For table DOC_ITEMS you have to set:
STATKEYFIG BRSAPU
STAT_QTY 10,000
PERSON_NO 00000000
SEG_TEXT
REC_CCTR MS1010
ACTTYPE
REC_ORDER
REC_WBS_EL
RECSALEORD
RECITEM 000000
Then you run and it will post. But there is no profit center line, maybe you have to use the parameter RECCOSTOBJ.
Regards
Fred
Similar Messages
-
SMS_STATE_MIGRATION_POINT Health check failed for port 80 with status code 500
My SMS_STATE_MIGRATION_POINT gets a red cross because the health check of the SMS_STATE_MIGRATION_POINT is “sometimes” failing. I don’t understand why its fails sometimes? Any suggestions.
gr, Iwan
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Checking store for cleanup of failed or stale state stores... SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
STATMSG: ID=6207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_MIGRATION_POINT" SYS=SWAMS0083 SITE=P01 PID=13560 TID=22044 GMTDATE=Thu Apr 15 13:01:29.777 2010 ISTR0="500" ISTR1="Internal Server Error" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)I'va got the following event in my security event log this is strange because the Windows Firewall is off and the problem is not always there, 8 out 10 time the health checks passes.
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 4/15/2010 7:01:27 PM
Event ID: 5159
Task Category: Filtering Platform Connection
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ********
Description:
The Windows Filtering Platform has blocked a bind to a local port.
Application Information:
Process ID: 13560
Application Name: \device\harddiskvolume2\programs (x86)\microsoft configuration manager\bin\i386\smsexec.exe
Network Information:
Source Address: 0.0.0.0
Source Port: 9000
Protocol: 17
Filter Information:
Filter Run-Time ID: 0
Layer Name: Resource Assignment
Layer Run-Time ID: 36 -
Table as Input parameter for BAPI in Webdynpro Application
I am creating webdynpro JAVA application to create RFQ, for which ABAP guy written a Custom BAPI called Z_BAPI_INQUIRY_CREATE. I tested this BAPI in SAPGUI it is working fine. From my webdynpro application when I passes header and item parameter, my header getting inserted but my item data is not. It is giving me error like "Table input parameter not found". I am passing table to this bapi. When I tried my code to standard BAPI's (NOT CUSTOM), I am able to insert both HEADER and ITEM data.
In above scenario I have few questions,
1. Is there anything extra we have to do with custom BAPI's? (my BAPIs are in BOR).
2. What is the datatype in webdynpro parallal to table parameter?
3. is there any tutorial available for table parameter? (except FLIGHT examle).
Thanks and regards,
NitinHi Vijayakhanna Raman,
Thanks much for your reply.
Yes I did the same as you mentioned, but still I am getting an error "Table parameter not avaliable is empty".
I am not getting were is the bug. And this is happening only with ZBapi's not with Standard Bapi's.
I am really stucted becouse of this, answer will really get all 10 points.
Here is my code,
1. First create an instance for bapi and bind the instance to the bapi node.
Z_Bapi_Inquiry_Change_Input input = new Z_Bapi_Inquiry_Change_Input();
Zbapirfqitem item =new Zbapirfqitem();
wdContext.nodeBapi_RFQ_OnHold_Update_Input().bind(input);
2. Then if u have the import parameter u have to set them by using
input.setRfq_Number("6");
input.setCreated_By("NLNS0000");
//wdContext.currentBapi_RFQ_OnHold_Update_InputElement().modelObject().setRfq_Number("6");
//wdContext.currentBapi_RFQ_OnHold_Update_InputElement().modelObject().setCreated_By("NLNS0000");
3. If the bapi has a table parameters then the structure for the table parameters will also be imported In the model class.
DONE!
4. Set the table parameters by creating the instance for that structure and using this instance set it.
item.setUpdateflag("I");
item.setItm_Number("000030");
item.setMaterial("MAT-NITIN");
item.setMatl_Desc("Inserted by Nitin");
item.setQuantity(new BigDecimal(4));
item.setBase_Uom("PCE");
item.setReq_Qty(new BigDecimal(4));
item.setBase_Uom1("PCE");
item.setList_Price(new BigDecimal(3));
item.setList_Curr("");
item.setReq_Price(new BigDecimal(4));
item.setCurrency("EUR");
item.setIndirect_Price(new BigDecimal(4));
item.setCurrency_2("EUR");
item.setFinal_Price(new BigDecimal(4));
item.setCurrency_3("EUR");
item.setText_Line("");
item.setReq_Date_H(new Date(12-05-06));
item.setDirect_Dis(new BigDecimal(4));
item.setIndirect_Dis(new BigDecimal(4));
item.setFinal_Dis(new BigDecimal(4));
item.setProfit_Margin1(new BigDecimal(4));
item.setProfit_Margin2(new BigDecimal(4));
item.setBrand1("");
item.setModel1("");
item.setVal_Loccurr1(new BigDecimal(4));
item.setCurrency1("");
item.setBrand2("");
item.setModel2("");
item.setVal_Loccurr2(new BigDecimal(4));
item.setCurrency2("");
5. Then add the structure instance to the bapi instance.
input.addItem(item);
6. Then Execute the bapi after setting the import parameters.
//wdThis.wdGetContext().currentBapi_RFQ_OnHold_Update_InputElement().modelObject().execute();
input.execute();
Message was edited by: Nitin Kamble -
How to create a sales order for Onetime customer with Tax code?
Hi everyone,
Can I use sd_salesdocument_create for a one-time customer? From the standard bapi, which field can I use for the Tax Code ?
pOints will be given.I have the same problem... should I use a different function module on this? if yes, what is it?
I need to create a sales order for one onetime customer with tax code... help me pls.... -
PO for Finished Goods with Tax Code - Inventorise
Hi All,
Our Client is procuring Finished Goods from Domestic Vendor & Excise Duty is paid to the Vendor for that i am defining the tax code in PO. Over here For the Finished Good in Tax Code it is not capturing - (Condition Type - JMO2). I have checked it in PO for ROH, HALB tax code is working perfectly with (Condition Type - JMO2). I like to know will it work for finished goods or not. In J1ID i have maintained Excise Rate.
I had followed the following steps.
1) Material code- Chapter id maintained in J1ID
2) Vendor code excisable in J1ID
3) Maintain condition record in FV11 for the correct validity period
4) Check the PO creation date whcih should fall between condition record validity period
Every thing is maintained i have checked it Thoroughly fot this particular material i am not getting it. This one is a finished goods material.
I am not able to identify what is happening.
I will give the flow so that you can help me out.
1. Created Material - Finished with all views except - Classification, Forecasting,
Work Scheduling & QM
2. Create Info Record - Tax Code given
3. J1ID - Chapter ID, Chap ID with Material, *** Val for Mat, Vendor Excise Detail, Excise ind. for Plant, Excise ind. for Plant & Vendor, & Excise Tax Rate.
4. FV11 - Maintained till - 31.12.9999.
5. FTXP - Tax Code is Maintained & it's working fine with other PO.
6. ME21N - PO is done for Domestic vendor with Standard PO With no condition & With only tax code for ED & CST.
7. In J1ID cenvat determination has been maintained.
Also the material type should be raw in material chapter id combination instead of RG1 even though the material is finished to take credit of excise it should be maintained as RAW .
Over Here if i see i am not able to capture (JMO2 A/P Eduty for Inven 0.000%) &
For Sale tax i have maintained it in FTXP as (A/P C Sales Tax Inv NVV 12.500% JIP1) but it is not appering in PO Tax code. I can See the sale tax is geting updated in Tax code for Inventorise if i give it with out ED in tax code. With ED it is not Appering in Taxcode.
Can you help me resolving the issue.
Once again thanks for youre help.
Thanks in Advance,
sapuser.
Edited by: sapuser on Dec 26, 2008 10:10 AMHi All,
Just give a check by entering cenvat determination table. System checks this by default for excise details. Enter i/p and o/p material as same.
Hope this will resolve you Problem,
Pherasath -
Limiting or control for Residual payment with reason codes
Hi FI Gurus,
When we are received or making payment to customer or vendor, sometimes we need to clear the invoice by receiving or making payments with small differences through residual payment. Is there any control for limiting residual payment.
Lets have an example
invoice posted for 1000
customer dr 1000
sales cr 1000
Partial payment recd 500
cash/bank dr 500
customer cr 500
final payment received 350 and balanace amount adjusted with residual payment by defining reason code like rounding off difference. So in this case accounting entry will be
customer cr 350
rounding off diff 150
cash/bank 500
being final payment agaisnt invoice
My question: Is there any way to restrict the residual payment like 10% or 20% of total invoice i.e. 100 or 200 and not more than 20% ? other wise sometime user may adjust any amount may be 100000 through this way by putting the same reason code, which is not fair.
I checked SPRO setting but i did not get anyt setting relating to above case.
If any body know, please let me know? Thanks in advance
Regards,
PrakashHi Lawerance,
Thanks for reply.
But I am looking for amount adjusted through residual with reason code. I dont think there is any limitation or control in the SPRO standard setting. Tolerance is preventing user to post document for more than a specific amount. But my question is something different.
I want to control the user for adjusting amount from residual tab with selecting reason code. In other words user should not adjust more than some limit with residual payment by selecting reason codes. Thanks.
Regards,
Prakash -
Look for JDeveloper Tutorial with samples code
Hello All ,
my name is Ron ,
i'm new user of JDeveloper i'm looking for a place to start a tutorial "How to use
the JDeveloper ? " with samples code .
from very basic use ( Hello world program ) to addvanced programming ( Like GUI Forms and Database )
please show me links where to start learning from
thanks in advanceThe tutorials in the JDeveloper help system are a very good place to start. Choose Help | Help Topics from the JDeveloper menu then click the Tutorials book in the Help navigator. The tutorials are also available on OTN, see:
http://otn.oracle.com:8877/jdeveloper/help/
You may also find the 'how to' documents and samples on OTN helpful:
Oracle9i JDeveloper How To Documents
http://otn.oracle.com/products/jdev/howtos/content.html
Oracle9i JDeveloper Sample Code
http://otn.oracle.com/sample_code/products/jdev/content.html
Hope this helps.
- jon -
PO for Finished Goods with Tax Code
Hi All,
Our Client is procuring Finished Goods from Domestic Vendor & Excise Duty is paid to the Vendor for that i am defining the tax code in PO. Over here For the Finished Good in Tax Code it is not capturing - (Condition Type - JMO1). I have checked it in PO for ROH, HALB tax code is working perfectly with (Condition Type - JMO1). I like to know will it work for finished goods or not. In J1ID i have maintained Excise Rate.
Help me to resolve tis issue.
Thanks in Advance,
sapuser
Edited by: sap user on Dec 18, 2008 4:04 PMHi All,
Every thing is maintained i have checked it Thoroughly fot this particular material i am not getting it. This one is a finished goods material.
I am not able to identify what is happening.
I will give the flow so that you can help me out.
Created Material - Finished with all views except - Classification, Forecasting,
Work Scheduling & QM
Create Info Record - Tax Code given
J1ID - Chapter ID, Chap ID with Material, *** Val for Mat, Vendor Excise Detail, Excise ind. for Plant, Excise ind. for Plant & Vendor, & Excise Tax Rate.
FV11 - Maintained till - 31.12.9999.
FTXP - Tax Code is Maintained & it's working fine with other PO.
ME21N - PO is done for Domestic vendor with Standard PO With no condition & With only tax code for ED & CST.
Over Here if i see i am not able to capture (JMO1 - A/P Eduty for Setoff 0.000 %).
Any other thing has to be taken care let me know.
Help me out in Solving this issue.
sapuser -
Report Listing for GL account with tax code assiociated with it by company
Hi expert,
Would like to seek for help does SAP have any standard report to list down all the tax code (with description) with the related GL accout by company code?
Please help.
Many thanks.
KHHi,
Thank you for your reply.
Do you have any ideas any report will be able to list all the define tax code for the related GL account not by posting document.
Please advice.
Many thanks.
KH -
Plant Abroad functionality for South Korea with Company Code in India
Hi,
I need help on SD functionality set up with regards to Plants abroad functionality for the Parent company in India and a manufacturing Plant in South Korea.
Has anyone work on such scenarios with plant abroad in South Korea. If yes, please help with the SD setup especially CIN and taxation requirements from SD side w.r.t. a South Korean Plant.
Thanks a ton in advance.
SameerHello Sameer,
I am working for Plants Abroad Funtionality for one Company Code with several Plants across Countries in Europe. Here there is a Standard feature given by SAP for INTRASTAT (Eupore) reporting. Also in Europe we can transfer stock from say plant in Germany to another PLant in France with charging any Tax.
But in your case you have Indian Company Code having Plant in South Korea... I don't know whether it is supported in SAP or not...
Also legally I wonder whether Indian Companies can own Plant in South Korea?
Infact most probably in your case there will be a seperate Company Code for Korean Plant... If that is the case then you don't require Plants Functionality.
Can you please further details of your Business Requirements?
Thanks,
Jignesh Mehta -
Transfer for sp stock with company code
Hi
Need your help on the following scenario
The scenario involves 2 company codes A & B
company A creates a STO with account assignment sales order, since the STO is assigned to sales order, when company B delivers the product, SAP system does not find special stock, so company B first transfers the stock from unrestricted stock to sp stock and then creates a delivery.
The question is it possible to deliver from company B without sp stock assignment as company B is independent and not aware of company A's business.
Looking forward
RegardsHi,
Your scenario seems like intercompany sales..
pls refer to the following links:
[http://www.sap-basis-abap.com/sd/configuring-intercompany-billing.htm]
[Intercompany sales process;
And you'll find many more discussions on this topic--pls search the forum.
Regards,
Raghu. -
Hi,
I have a sccm 2007 infrastructure with multiple site. from some period of time one site start to have problems after some switches changes.
I try to locate the problem but until now no succes.
Any ideea?
Thksmp.msi log
Property(S): SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\WINDOWS\system32\
Property(S): X64Perf.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\WINDOWS\system32\CCM\X64Perf\
Property(S): CCMSERVERDATAROOT = d:\sms
Property(S): Incoming.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = d:\sms\CCM\Incoming\
Property(S): Outgoing.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = d:\sms\CCM\Outgoing\
Property(S): CcmSystemVDirName = CCM_System
Property(S): CcmSystemRegVDirName = CCM_System_WindowsAuth
Property(S): CcmSystemAltAuthVDirName = CCM_System_AltAuth
Property(S): System.8D24F0F7_99DC_460C_9DA6_4193612E0D59 = C:\WINDOWS\system32\CCM\ServiceData\System\
Property(S): IA64Dir.181B4E66_9269_4E84_9E55_B6E7B91A7472 = C:\WINDOWS\system32\CCM\IA64\
Property(S): System.181B4E66_9269_4E84_9E55_B6E7B91A7472 = C:\WINDOWS\system32\CCM\ServiceData\System\
Property(S): x64Dir.6E186A08_E33E_4FBC_A39A_E3456945465F = C:\WINDOWS\system32\CCM\x64\
Property(S): System.6E186A08_E33E_4FBC_A39A_E3456945465F = C:\WINDOWS\system32\CCM\ServiceData\System\
Property(S): SMSCACHEDIR = Default
Property(S): SMSCACHEFLAGS = Default
Property(S): DISABLESITEOPT = Default
Property(S): DISABLECACHEOPT = Default
Property(S): SMSCACHESIZE = 5120
Property(S): x64.1A064B3F_A0C0_4EAC_8EE8_5AA5F0B33E3E = C:\WINDOWS\system32\CCM\x64\
Property(S): IA64.15899AB9_39B9_4695_BC16_3CCBF38F7EEB = C:\WINDOWS\system32\CCM\IA64\
Property(S): CCMINSTALLMSMQ = FALSE
Property(S): CCMINSTALLMP = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): ARPNOREMOVE = 1
Property(S): ARPNOMODIFY = 1
Property(S): CCMENABLELOGGING_Default = FALSE
Property(S): CCMLOGLEVEL_Default = 1
Property(S): CCMLOGMAXSIZE_Default = 2000000
Property(S): CCMLOGMAXHISTORY_Default = 1
Property(S): SecureCustomProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;SMSUPGRADEPRODUCTS;CCMSERVERDATAROOT;SMSUPLEVELPRODUCTS;USESMSPORTS;SMSPORTS;CCMHTTPPORT;SMSSP1COLOCDOWNGRADE;USESMSSSLPORTS;SMSSSLPORTS;SMSSSLSTATE;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSFWKUPGRADEFROMPREV4BETA2;CCMFWKUPGRADEFROMPREV4BETA2;SMSCWS;CCMSHAREMODE
Property(S): AdminProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;CCMSERVERDATAROOT;CCMALLOWSILENTREBOOT;CCMHTTPPORT;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSCWS
Property(S): CcmDefaultPolicyAuthorityPriority = 10
Property(S): SmsDetectColocationDowngrade_ErrorMessage = A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
Property(S): ButtonText_Next = &Next >
Property(S): ButtonText_Back = < &Back
Property(S): ButtonText_Cancel = &Cancel
Property(S): ButtonText_Finish = &Finish
Property(S): ButtonText_Install = &Install
Property(S): ButtonText_Close = &Close
Property(S): ButtonText_OK = &OK
Property(S): ButtonText_Abort = &Abort
Property(S): ButtonText_Ignore = &Ignore
Property(S): ButtonText_No = &No
Property(S): ButtonText_Yes = &Yes
Property(S): ButtonText_Retry = &Retry
Property(S): ButtonText_Exit = &Exit
Property(S): FilesInUse_Info = Setup has detected that it needs to update some files that are currently in use by other processes.
To prevent having to reboot the machine, please close the following applications:
Property(S): DefaultUIFont = DefaultDlgFont
Property(S): DialogBox_Title = SMS Management Point Setup
Property(S): WelcomeDialog_Info = This will install the Systems Management Server Management Point.
Property(S): InstallDialog_Title = Install
Property(S): InstallDialog_SubTitle = The product is now ready to install
Property(S): InstallDialog_Info = Click Next to proceed.
Property(S): ProgressDialog_Title = Please Wait
Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
Property(S): CompleteDialog_Title = Setup Complete
Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
Property(S): CompleteDialog_Info = Setup was successful.
Property(S): UserExitDialog_Title = Setup Aborted
Property(S): UserExitDialog_SubTitle = Setup was cancelled
Property(S): UserExitDialog_Info = The SMS Management Point setup was cancelled.
Property(S): InstallErrorDialog_Title = Setup Aborted
Property(S): InstallErrorDialog_SubTitle = Setup failed
Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\WINDOWS\system32\
Property(S): X64Perf.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\WINDOWS\system32\CCM\X64Perf\
Property(S): CcmDefaultPolicyAuthority = SMS:MP:Default:{B391E30E-C8BD-41FC-8B8C-540C4365DBE0}
Property(S): MPVDirRoot.67022EC1_A401_46E9_91FC_2DF2ED04CF15 = C:\WINDOWS\system32\CCM\SMS_MP\
Property(S): x64.0A840968_9A21_4DA4_A2B3_06C6AEAA2EC9 = C:\WINDOWS\system32\CCM\x64\
Property(S): MPVDirRoot.0A840968_9A21_4DA4_A2B3_06C6AEAA2EC9 = C:\WINDOWS\system32\CCM\SMS_MP\
Property(S): IA64.41483201_CB1F_4581_8423_CA84BCFA8A59 = C:\WINDOWS\system32\CCM\IA64\
Property(S): MPVDirRoot.41483201_CB1F_4581_8423_CA84BCFA8A59 = C:\WINDOWS\system32\CCM\SMS_MP\
Property(S): Res1033.0EACD2EE_412B_4985_9727_96BC217AABD8 = C:\WINDOWS\system32\CCM\1033\
Property(S): Res1033.4CB41E5B_59DE_4D09_98C5_332377961F73 = C:\WINDOWS\system32\CCM\1033\
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): USESMSPORTS = TRUE
Property(S): SMSPORTS = 80
Property(S): USESMSSSLPORTS = TRUE
Property(S): SMSSSLPORTS = 443
Property(S): USESMSSSL = TRUE
Property(S): SMSSSLSTATE = 0
Property(S): CCMENABLELOGGING = TRUE
Property(S): CCMLOGLEVEL = 1
Property(S): CCMLOGMAXSIZE = 1000000
Property(S): CCMLOGMAXHISTORY = 1
Property(S): CURRENTDIRECTORY = D:\sms\bin\i386
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 4972
Property(S): VersionDatabase = 110
Property(S): VersionMsi = 3.01
Property(S): VersionNT = 502
Property(S): WindowsBuild = 3790
Property(S): ServicePackLevel = 2
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\WINDOWS\
Property(S): WindowsVolume = C:\
Property(S): System16Folder = C:\WINDOWS\system\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\WINDOWS\TEMP\
Property(S): ProgramFilesFolder = C:\Program Files\
Property(S): CommonFilesFolder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\WINDOWS\system32\config\systemprofile\Application Data\
Property(S): FavoritesFolder = C:\WINDOWS\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\WINDOWS\system32\config\systemprofile\NetHood\
Property(S): PersonalFolder = C:\WINDOWS\system32\config\systemprofile\My Documents\
Property(S): PrintHoodFolder = C:\WINDOWS\system32\config\systemprofile\PrintHood\
Property(S): RecentFolder = C:\WINDOWS\system32\config\systemprofile\Recent\
Property(S): SendToFolder = C:\WINDOWS\system32\config\systemprofile\SendTo\
Property(S): TemplateFolder = C:\Documents and Settings\All Users\Templates\
Property(S): CommonAppDataFolder = C:\Documents and Settings\All Users\Application Data\
Property(S): LocalAppDataFolder = C:\WINDOWS\system32\config\systemprofile\Local Settings\Application Data\
Property(S): MyPicturesFolder = C:\WINDOWS\system32\config\systemprofile\My Documents\My Pictures\
Property(S): AdminToolsFolder = C:\Documents and Settings\All Users\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\Documents and Settings\All Users\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\Documents and Settings\All Users\Start Menu\Programs\
Property(S): StartMenuFolder = C:\Documents and Settings\All Users\Start Menu\
Property(S): DesktopFolder = C:\Documents and Settings\All Users\Desktop\
Property(S): FontsFolder = C:\WINDOWS\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 15
Property(S): PhysicalMemory = 4095
Property(S): VirtualMemory = 5202
Property(S): AdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 1033
Property(S): ComputerName = CCAZ341
Property(S): SystemLanguageID = 6153
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 15:42:16
Property(S): Date = 4/9/2014
Property(S): MsiNetAssemblySupport = 2.0.50727.42
Property(S): MsiWin32AssemblySupport = 5.2.3790.3959
Property(S): RedirectedDllSupport = 2
Property(S): Privileged = 1
Property(S): USERNAME = TGAdmin
Property(S): COMPANYNAME = Teagasc
Property(S): DATABASE = C:\WINDOWS\Installer\15b9a.msi
Property(S): OriginalDatabase = d:\sms\bin\i386\mp.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
Property(S): IISAnonymousUserAccount = IUSR_CCAZ341
Property(S): ROOTDRIVE = E:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 21613138
Property(S): PrimaryVolumeSpaceRequired = 29783
Property(S): PrimaryVolumeSpaceRemaining = 21583355
Property(S): INSTALLLEVEL = 1
Property(S): CcmAdministratorsGroupName = Administrators
Property(S): CcmUsersGroupName = Users
Property(S): CcmCreatorOwnerAccountName = CREATOR OWNER
Property(S): PrimaryVolumePath = C:
Property(S): SOURCEDIR = d:\sms\bin\i386\
Property(S): SourcedirProduct = {B391E30E-C8BD-41FC-8B8C-540C4365DBE0}
Property(S): CCMHTTPSPORT = 443
Property(S): CCMHTTPSSTATE = 0
Property(S): CCMHTTPPORT = 80
Property(S): ProductToBeRegistered = 1
MSI (s) (44:D4) [15:42:16:906]: Note: 1: 1708
MSI (s) (44:D4) [15:42:16:906]: Product: SMS Management Point -- Installation operation failed.
MSI (s) (44:D4) [15:42:16:906]: Cleaning up uninstalled install packages, if any exist
MSI (s) (44:D4) [15:42:16:906]: MainEngineThread is returning 1603
MSI (s) (44:C0) [15:42:17:015]: Destroying RemoteAPI object.
MSI (s) (44:F8) [15:42:17:015]: Custom Action Manager thread ending.
=== Logging stopped: 4/9/2014 15:42:16 ===
MSI (c) (6C:F0) [15:42:17:015]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (6C:F0) [15:42:17:031]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/9/2014 15:42:17 === -
MakePri.exe came to the end with a code -1073740791
Hi.
I have a problem with my project for Windows Phone 8.1.
For example yesterday I built my project without error. But today I can't launch my project, I got error for MakePri.exe with error code -1073740791. And I didn't do any changes in my code today!
Please, any ideas!
I tried to remove all pages, but I got this error again.Hi Pizhon,
I think this could be a environment issue instead of coding issue, I believe if you create a blank app, the MakePri.exe still get problem.
I would recommend you to restart your dev computer and also try to install the updates for Visual Studio also Windows, you should be able to cover this issue. Otherwise probably you may need fix your Visual Studio from Control Panel.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I want parameter for program name entering with f4 help pls send code
I want parameter for program name entering with f4 help pls send code
Points if helpfulHi,
PROG is a string which indicates the type of the object --- program
u can call the FM as follows
CALL FUNCTION 'REPOSITORY_INFO_SYSTEM_F4'
EXPORTING
<b> object_type = 'PROG'
OBJECT_NAME = p_report</b>
ENCLOSING_OBJECT =
SUPPRESS_SELECTION = 'X'
VARIANT = ' '
LIST_VARIANT = ' '
DISPLAY_FIELD =
MULTIPLE_SELECTION =
SELECT_ALL_FIELDS = ' '
WITHOUT_PERSONAL_LIST = ' '
IMPORTING
OBJECT_NAME_SELECTED =
ENCLOSING_OBJECT_SELECTED =
STRUCINF =
TABLES
OBJECTS_SELECTED =
RECORD_TAB =
EXCEPTIONS
CANCEL = 1
WRONG_TYPE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Patil -
How to use the field checkbox for bapi parameter ?
Dear All,
Now, i find some code as below.
The BAPI is uesd to create or update the sales order; but checkbox for bapi parameter have not been give values 'X'. why?
take the first bapi for example, i think table order_items_inx (table parameter) should be given value 'X' for the field which will be update.
Could you teach what happed?
case gt_all_hd-sd_doc_cat.
when 'C'.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
order_header_in = gs_order_hd
importing
salesdocument = gv_vbeln
tables
return = gt_return
order_items_in = gt_items
order_partners = gt_partners
order_schedules_in = gt_schedules
order_conditions_in = gt_conditions.
when others.
call function 'BAPI_SALESDOCU_CREATEFROMDATA1'
exporting
sales_header_in = gs_order_hd1
importing
salesdocument_ex = gv_vbeln
tables
return = gt_return
sales_items_in = gt_item1
sales_partners = gt_part1
sales_schedules_in = gt_sch1
sales_conditions_in = gt_cond1.
endcase.If you want to change a value, you need to pass the value in the 'order_items_in = gt_items' structure.
You also need to add an 'X' in the 'order_items_inx = gt_itemsx' structure for the same field.
If you do not pass the 'X' then the value will not be updated...
It looks like you are not passing the required '...x' structures.
For more info see the documentation:
Notes
1. Mandatory entries:
ORDER_HEADER_IN : DOC_TYPE Sales document type
SALES_ORG Sales organization
DISTR_CHAN Distribution channel
DIVISION Division
ORDER_PARTNERS..: PARTN_ROLE Partner role, SP sold-to party
PARTN_NUMB Customer number
ORDER_ITEMS_IN..: MATERIAL Material number
2. Ship-to party:
If no ship-to party is entered, use the following: Ship-to party =
sold-to party.
3. Commit control:
The BAPI does not have a database commit. This means that the
relevant application must leave the commit, in order that can be
carried out on on the database. The BAPI BAPI_TRANSACTION_COMMIT is
available for this.
4. German key words:
The following key words must be entered in German, independantly of
the logon language:
DOC_TYPE Sales document type, for example: TA for standard order
PARTN_ROLE Partner role, for example: WE for ship-to party
Further information
You can find further information in the OSS. The note 93091 contains
general information on the BAPIs in SD.
Maybe you are looking for
-
Safari 4.0.2 keeps on crashing
hey there, after some time, it can be minutes or hours safari crashes on me. not doing anything extra it can be the only program open. here's the report: Process: Safari [182] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple
-
Dear All , I also need complete document on idoc-xi-file scenario including configuration required for SAP and XI system The documents which are there in the weblog contains only some part of the scenarion . It doesn't capture the configuration requi
-
Exception in thread "main" java.lang.UnsatisfiedLinkError: no ocijdbc 10
I have a script file called xmldr XML_LIB=~/sm/xmlDR/xmldr/lib export XML_LIB CLASSPATH=$CLASSPATH:$XML_LIB/ojdbc14.jar:$XML_LIB/xmldr.jar:$XML_LIB/xml.jar:$XML_LIB/xmlparserv2.jar:$XML_LIB/xsu12.jar; export CLASSPATH java xmlDR $0 $1 $2 $3 $4 $5 $6
-
I can send printed text from my iPhone, but when i copy and paste a photo from my camera roll, it doesn't print and when I check my account, it has a failed message. The photo was only 1.25 MB
-
Identify the Queue Name Based on the Datasource
Hi Experts, How do we find the Queue name ( say for 2LIS_03_BF) in LBWQ based on Datasource/Extractor (2LIS_03_BF). Thanks, Satya