Identify the Queue Name Based on the Datasource
Hi Experts,
How do we find the Queue name ( say for 2LIS_03_BF) in LBWQ based on Datasource/Extractor (2LIS_03_BF).
Thanks,
Satya
Hi,
Thanks for your reply,
I have a question based on the above reply that Queue Name is based on the Application or Datasource?
Thanks,
Satya
Edited by: satya prasad on Mar 11, 2010 11:21 AM
Similar Messages
-
Find the folder name based on the View Name
Hi ,
I need to find out a Folder name based on a View Name . Basically i know the view Name and want to find out the Folder that is created in Discovrer based out of that view.
Does any one know of any EUL table that stores this relationship.
Thanks in advance for your help
SunnyHi,
Your requirement can be fulfilled using the following script:
SELECT bas.ba_name,
bas.ba_id,
obj.obj_name folder,
decode(obj.obj_type,
'COBJ',
'Complex',
'SOBJ',
'Simple',
'CUO',
'Custom',
'Unknown') AS obj_type,
decode(obj.obj_hidden,0,'Bare','Hidden') IS_HIDDEN,
obj.sobj_ext_table folder_source_object
FROM eul10g_us.eul5_ba_obj_links bol,
eul10g_us.eul5_objs ; obj,
eul10g_us.eul5_bas ; bas
WHERE obj.obj_id = bol.bol_obj_id
AND bas.ba_id = bol.bol_ba_id
BUT
As you can see from the SQL, only simple folders are mapped to objects.
This means that if the object is used inside a custom folder or complex folder you will not see it.
Tamir -
Dynamic display of the Company Name based on Org
Hello All,
I need to dynamically display the Company name based on the Org_id and the ORG is not being populated in the XML data file. How do i achieve this,please let me know.
Thanks
RakeshRakesh,
It's like getting something from nothing (data template)... If you do not want to modify your report, then Vetri's option will be fine(your going to add not modify)...
Or,. define a new Oracle report based on the seeded one then do modify...
regards,
Rownald -
How to change datasource name based on the partition in configplan
Hi
Can any one please give me some solutions regarding how to change datasource name based on the partition in
configplan.
can't we do this in configuration plan?If you want to change template based on parameter. you have to use below syntax
v_layout boolean
V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
,template_code => 'HUBAPAPN' -- template name
,template_language => 'en'
,template_territory => '00'
,output_format => 'PDF');
Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
Thanks
Kamalakar -
Passing the queue name to the sender JMS adapter at run time..
Hello Experts,
I have a scenario where PI is to pick data from MQ queues. The message type coming from queues is same and the procession needs to be done with PI is also the same.That's the reason why we want to have only one interface processing the data for all the queues.
My question here is that is there any way where I do not put the queue name in the sender adapter at design time and based on the data availability in the queue let the sender adapter know the queue name to be processed at run time.
Any suggestions will be greatly appreciated.
- Rajan> My question here is that is there any way where I do not put the queue name in the sender adapter at design time and based on the data availability in the queue let the sender adapter know the queue name to be processed at run time.
Unfortunately for JMS Sender CC it is not possible, but other way around is possible. I.e. you can dynamically choose the receving queue names by using ASMA "JMSReplyTo" in JMS Sender CC.
Regards,
Sarvesh -
Why do the queue names appear to include jms-module name (+!) ?
We upgraded our domain from weblogic 8.1 to 10.3.2.
To get the clustered environment to work, I had to delete the jms-module and recreate (including the FileStore, the Jms-server...).
After doing all this, When examining the Jms-server Active Destinations,
(In Settings - Monitoring - Active Destination)
I see the queue names such as:
jms-moduleName!queueName
I can't help but think this is related to this error message in the logs;
No servers found having jms destination queueName.
In our single server environment. I did not have to delete and recreate the autogenerated Jms-module and in Active Destinations, the Name shows up as I would expect. In this environment, I do not have the same error as above.
Is there anyway to stop the prefix, 'jms-moduleName!" from being added to the queue name in Active Destinations?
How and why is this being added?
Any comments would be greatly appreciated. THANKS.Hi,
Almost all applications use a destination's JNDI name to look it up (see the JNDI name field for each destination). The "jms-moduleName!queueName" syntax your referenced is generated based on the configured name of the destination, not the JNDI name.
Some side advice since your setting up a new configuration:
* If your using distributed destination, I advise taking the opportunity to change your configuration to use the simpler"uniform distributed destination" option. 8.1 and older supported only the older "weighted distributed destination" behavior which requires that each member destination be configured individually -- this is unwieldy, and will (hopefully) be deprecated soon.
* See [ JMS Configuration Best Practices | http://download.oracle.com/docs/cd/E14571_01/web.1111/e13738/best_practice.htm#CACJCGHG ] and [ JMS Performance and Tuning Check List | http://download.oracle.com/docs/cd/E14571_01/web.1111/e13814/jmstuning.htm#PERFM294 ].
* Always configure quotas and paging, and ensure they are tuned to prevent JVM out-of-memory (as per the JMS Perf and Tuning check list referenced above).
Hope this helps,
Tom
Edited by: TomB on Jun 20, 2010 7:00 PM -
JMS ReplyTo Queue Name parameter in the receiver JMS communication channel
Hi All,
Can any please explain the use of JMS ReplyTo Queue Name parameter in the receiver JMS communication channel?
Thanks
Karthik.Hi karthik,
JMS ReplyTo Queue Name parameter is used for Specify the name of the queue to which the responses are to be sent.
Thanks
Govind. -
Fetch the operating unit name based on the country name
Hi all,
I want to fetch the operating unit name based on the country name, there is no link between fnd_territories(_tl) and hr_all_organization_unis(_tl) tables.
Can any one know how to get this thing.
any help or idea is appreciable.
Thanks,
GiriGiri,
I don't think you will find such a link. One country can be used by multiple operating units.
Hope this helps,
Sandeep Gandhi -
Is it possible to suppress the Page Header of the Main Report based on the Section Name?
Hi,
I am fairly new to Crystal Reports XI. Is it possible to suppress the Page Header of the Main Report based on the Section Name? Thanks.In the section expert you can enter a formula on the suppress function.
You just need something to check against if it is section name you say
{section name} ="Suppressme"
I have used it more in drill level to display headers based on how far you have drilled into a report.
Hope this helps
Eric
Via Christi Health System -
How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.
Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
lo_el_context->set_attribute(
name = `READONLY`
value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
DATA lo_el_input TYPE REF TO if_wd_context_element.
DATA ls_input TYPE wd_this->element_input.
DATA lv_vbeln TYPE wd_this->element_input-vbeln.
* navigate from <CONTEXT> to <INPUT> via lead selection
lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
* @TODO handle non existant child
* IF lo_nd_input IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_input = lo_nd_input->get_element( ).
* @TODO handle not set lead selection
IF lo_el_input IS INITIAL.
ENDIF.
* get single attribute
lo_el_input->get_attribute(
EXPORTING
name = `VBELN`
IMPORTING
value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
lo_el_context->set_attribute(
name = `READONLY`
value = ' ' ). -
SQL Query to retrieve the All records based on the Max Dates.
Hello all,
I am trying to retrieve the newest record based on the date field ( nextDate ).
Currently there are only 4 records in the MC_Maintenance table and two in the Machine table.
Machine table
MC_id EquipID
1 0227
MC_id EquipID
2 0228
MC_Maintenance table
Maint_id MC_id Next_maint
1 2 08/25/2010
2 2 07/01/2010
3 1 06/11/2010
4 1 07/11/2010
What I am trying to accomplish is,
list the two machines from the Machine table with the MAX(Next_maint) controlling the MC_Maintenance output list
These are the records that I would like to Display.
Maint_id MC_id Next_maint
1 2 08/25/2010
4 1 07/11/2010
Below is the SQL Query
SELECT
MC.MC_ID as ID,
MC.complete_Date as completed,
MC.next_maint as nextDate,
MC.maint_notes as Notes,
MC.facility as Facility,
M.EquipId,
M.name as name,
M.SerialNumber as SN,
M.dept as dept,
M.Freq as freq
From MC_Maintenance MC, Machine M
where MC.MC_ID = M.MC_ID
' USING MAX(nextDate )
Any ideas would help.
TJI would have thought that was a simple group by problem?
SELECT M.EquipID, MC.MC_ID, Max(MC.next_maint)
FROM MC_Maintenance MC INNER JOIN Machine M ON MC.MC_ID = M.MC_ID
GROUP BY M.EquipID, MC.MC_ID -
Hi,
I have different sets of users coming from different databases and using different
roles mapping for each of my web applications. I would like to configure a specific
security realm per application in my weblogic server 7.0 . Is it possible ?
I try to specify the realm-name of the login-config tag from the web-xml deployement
descriptor but it doesn't make any difference. The default realm is always used.
I also would like to tell the Weblogic server to use the default realm in case
the realm isn't specified or isn't found. For example, the default would contains
my admin users.
Thanks a lot for your answer.
IzI thik this is a common mistake the ralm-name tag in the deployment descriptor is used
just by the browser for display purposes (when it opens the basic auth dialog box) so as
of now there is only 1 active realm which can have multiple providers as Kevin pointed
out
Kevin Lewis wrote:
WebLogic 7 now ignores the realm-name tag (I found that out yesterday).
My understanding is that there is only one realm active at a time for a domain
(I would be interested in being contradicted in this).
However, you can have multiple providers in each category of a realm: authentication,
authorization, etc. Therefore, what you can do is key authentication, et al,
off of some other information. We have our users enter their company, for example,
and use the TextInputCallback to get it. You could also encode something in the
initial page, based on the URL they hit, or whatever, and get that back in your
callback.
You can store that information in your own Principal implementation, and key off
of that in your authorization provider, going to a different database as appropriate,
or abstaining when a specific provider doesn’t have anything to say about a subject.
Anyway, there should be a way to do it, even if it's more complex than you would
have hoped.
--Kevin -
Determine the employee responsible based on the territory structure
Hi all ,
System should automatically determine the employee responsible based on the territory structure.
Get the Employee Name and Employee Region Name
Are they standard programs or BAPI's to achive this?
Thanks,
Anitha.Hi Anitha,
You can try using partner determination procedure ,where in for partner function employee resposnible define access sequence with the source as "CRM_PARTNER_M-- Business Partner from Territory management".
Also check few notes:
1428285
1399843
1423950
Hope this helps.
Rgds,
deepa -
SAP Standard report to view the asset balance- Based on the calender year
Hi ALL
Any sap standard programs are available to view the asset balance based on the calendar year not for the fiscal year.
Asset balance report S_ALR_87011964 will display based on the fiscal year in report date. For example I want to view the September month asset balance, Any standard report to view the calendar year wise output.
Regards
K.GunasekarDear Gunasekar,
in Asset balance report S_ALR_87011964 you can view also a calendar year, you can enter every Reporting date in the progrm.
In RABEWG_ALV01 you can enter also a Capitalization date "from to". I think this is what you want.
regars Bernhard -
I get this message when I try to import some CD's to my library.
A window pops up and says
Error occurred while converting the file "name of song"
The file name was invalid or to long.
Anyone else ever get this message, and how can you import CD's???????I have had this exact same problem. I'm not sure how to fix it...
Maybe you are looking for
-
Syncing multiple iPhones with 1 computer
I have my iPhone 4s and my wife has an iPhone 4s. What is the best way to sync with iTunes. I would like to use my 1 account. Will that mess anything up, or is it better to set up both iTunes account.
-
ITunes eating up memory and disabling network in win7
Hello everyone. Im a new user of the iPod Touch 1G (gf gift). Thing is, i just installed iTunes, and when syncing my iPod, iTunes seems to simply eat up all memory available (2gB RAM) until all computer gets to a standstill. I cant even restart. Any
-
Hi All I want to read an xml file which contains all the requried data for presentation purposes. Is there any in which this file can be used a datasource and we can query this file to create different reports. From [this|Re: Can XML files be used fo
-
No group message option in iMessage option in settings
For some reason I don't have a group messaging option under iMessage options, I'm using a 5s and running ios 7.1.1
-
Problem with page size for mobile version
the mobile version of the site is not full width and there is a gap in the right side . i set the page width size to 320 or 380 or 460 but the problem is there no matter of the page size.