Filled redo log files are available to LGWR for reuse

Hi,
Oracle version:
Oracle Database 10g Release 10.2.0.4.0 -
OS:Windows XP
In oracle documentation it is mentioned that:
Filled redo log files are available to LGWR for reuse depending on whether archiving is enabled.
*> If archiving is disabled (the database is in NOARCHIVELOG mode), a filled redo log file is available after the changes recorded in it have been written to the datafiles*.
Link for Documentation is:
http://docs.oracle.com/cd/B28359_01/server.111/b28310/onlineredo001.htm
My doubt is:
Redo Records are written to datafiles also??

user12141893 wrote:
Does it mean:
Suppose:
Online redo log files contains some redo entries and database buffer cache contains some data and this data belong to redo entries of redo log files.
Now this redo log file can't be reused until those (related) blocks of database buffer cache are written into datafiles.
This is sort of correct. If the log file would be filled up , LGWR would switch over to the next log group and would initiate a Log Switch which would further trigger DBWR to start checkpointing the content protected by this log group to the data file. By the time this operation would be going on, the Log group's members would have the status of Active and once it would be complete, the status would be marked to Inactive which means that this log group and its members can be reused by LGWR.
HTH
Aman....

Similar Messages

Redo log files are not applied in DR of primary

Hi All,
I have a DR database of primary on QA Serevr. The Redo log files are not properly applied in the DR database.
The Oracle version is 11.2.0.1 Some of the files get shipped and applied to DR database automatically but not all.
SQL> select status, error from v$archive_dest where dest_id=2; gives following massage
ERROR ORA-16086: Redo data cannot be written to the standby redo log
Please suggest.
Regards,
Shashi

Hi,
Sorry for delay in response. Here I am attaching the error captured in standby database.
Please advise
alert_abc.log
RFS[1780]: Identified database type as 'physical standby': Client is LGWR SYNC pid 21855
Primary database is in MAXIMUM AVAILABILITY mode
Standby controlfile consistent with primary
Standby controlfile consistent with primary
RFS[1780]: No standby redo logfiles of file size 94371840 AND block size 512 exist
Clearing online log 16 of thread 0 sequence number 0
Errors in file /oracle/diag/rdbms/abc_location11/abc/trace/abc_rfs_27994.trc:
ORA-00367: checksum error in log file header
ORA-00315: log 16 of thread 0, wrong thread # 1 in header
ORA-00312: online log 16 thread 0: '/oracle/abc/origlogB/log_g116m1.dbf'
Mon Nov 14 00:49:16 2011
Clearing online log 9 of thread 0 sequence number 0
Errors in file /oracle/diag/rdbms/abc_location11/abc/trace/abc_arc0_15653.trc:
/oracle/diag/rdbms/abc_location11/abc/trace/abc_rfs_27994.trc
2011-11-14 00:49:19.385
DDE rules only execution for: ORA 312
START Event Driven Actions Dump -
END Event Driven Actions Dump -
START DDE Actions Dump -
Executing SYNC actions
START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -
DDE Action 'DB_STRUCTURE_INTEGRITY_CHECK' was flood controlled
END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (FLOOD CONTROLLED, 1 csec) -
Executing ASYNC actions
END DDE Actions Dump (total 0 csec) -
ORA-00367: checksum error in log file header
ORA-00315: log 16 of thread 0, wrong thread # 1 in header
ORA-00312: online log 16 thread 0: '/oracle/abc/origlogB/log_g116m1.dbf'
DDE rules only execution for: ORA 312
START Event Driven Actions Dump -
END Event Driven Actions Dump -
START DDE Actions Dump -
Executing SYNC actions
START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -
DDE Action 'DB_STRUCTURE_INTEGRITY_CHECK' was flood controlled
END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (FLOOD CONTROLLED, -641 csec) -
Executing ASYNC actions
END DDE Actions Dump (total 0 csec) -
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 16 thread 0: '/oracle/abc/origlogB/log_g116m1.dbf'
Error 19527 clearing SRL 16
/oracle/diag/rdbms/abc_location11/abc/trace/abc_arc0_15653.trc
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 9 thread 0: '/oracle/abc/origlogA/log_g19m1.dbf'
Error 19527 clearing SRL 9
DDE rules only execution for: ORA 312
START Event Driven Actions Dump -
END Event Driven Actions Dump -
START DDE Actions Dump -
Executing SYNC actions

Redo log files are not applying to standby database

Hi everyone!!
I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database. I run the following command on the standby database.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
1. How to resolve this issue ?
2.Is it compulsory to have Primary database open ?
3. I have created standby control file by using command
SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should I have different database name for both or existing one is correct ?
Can anybody help me to come out from this stuck ?
Thanks & Regards
Tushar Lapani

Thank you Girish. It solved my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
I did following scenario.
1. Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
Thanks

Redo log files are deleted, how to recover the database

Hi All,
I removed the redo01.log, redo02.log and redo03.log files of our Oracle database. And it caused the db to fail. Is there any way I can recover the database and startup database in normal mode? I do not need it to have all the latest data restored, I will be happy to just start the db and get going.
database is in arcive log mode.
Thanks

Hello,
You may try this if the database is mounted:
recover database until cancel;
cancel
alter database open resetlogs;Hope it can help.
Best regards,
Jean-Valentin

Need to understand when redo log files content is wrote to datafiles

Hi all
I have a question about the time when redo log files are wrote to the datafiles
supposing that the database is in NOARCHIVELOG mode, and all redo log files are filled, the official oracle database documentation says that: *a filled redo log file is available
after the changes recorded in it have been written to the datafiles* witch mean that we just need to have all the redo log files filled to "*commit*" changes to the database
Thanks for help
Edited by: rachid on Sep 26, 2012 5:05 PM

rachid wrote:
the official oracle database documentation says that: a filled redo log file is available after the changes recorded in it have been written to the datafiles It helps if you include a URL to the page where you found this quote (if you were using the online html manuals).
The wording is poor and should be modified to something like:
<blockquote>
+"a filled online redo log file is available for re-use after all the data blocks that have been changed by change vectors recorded in the log file have been written to the data files"+
</blockquote>
Remember if a data block that is NOT an undo block has been changed by a transaction, then an UNDO block has been changed at the same time, and both change vectors will be in the redo log file. The redo log file cannot, therefore, be re-used until the data block and the associated UNDO block have been written to disc. The change to the data block can thus be rolled back (uncommitted changes can be written to data files) because the UNDO is also available on disc if needed.
If you find the manuals too fragmented to follow you may find that my book, Oracle Core, offers a narrative description that is easier to comprehend.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
Author: Oracle Core

What is the purpose of standby redo log files

Hi,
What is the purpose of the standby redo log files in DR?
what if the standby redo log files are created? or else not created?
Please explain
Thanks

3.1.3 Configure a Standby Redo LogA standby redo log is required for the maximum protection and maximum availability modes and the LGWR ASYNC transport mode is recommended for all databases. Data Guard can recover and apply more redo data from a standby redo log than from archived redo log files alone.
You should plan the standby redo log configuration and create all required log groups and group members when you create the standby database. For increased availability, consider multiplexing the standby redo log files, similar to the way that online redo log files are multiplexed.>
Reference http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#i1225703
HTH
Anand

Use of standby redo log files in primary database

Hi All,
What is the exact use of setting up standby redo log files in the primary database on a data guard setup?
any good documents?

A standby redo log is required for the maximum protection and maximum availability modes and the LGWR ASYNC transport mode is recommended for all databases. Data Guard can recover and apply more redo data from a standby redo log than from archived redo log files alone.
You should plan the standby redo log configuration and create all required log groups and group members when you create the standby database. For increased availability, consider multiplexing the standby redo log files, similar to the way that online redo log files are multiplexed.
refer the link,and Perform the following steps to configure the standby redo log.:-
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#i1225703
If the real-time apply feature is enabled, log apply services can apply redo data as it is received, without waiting for the current standby redo log file to be archived. This results in faster switchover and failover times because the standby redo log files have been applied already to the standby database by the time the failover or switchover begins.
refer the link
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_apply.htm#i1023371

BRARCHIVE backup for high volume offline redo log files on Standby Database

Hi All,
We are through with all of Standby database activity, also started applying the offline redo log files on the Standby site.
The throughput is not utilizing the actual available bandwith.
So we are not able to copy the offline redo files on time, as the offline redo files are piling up on the Production side.
My query is how we can parallely copy the offline redo log files on the DR site (ie. 4-5 redo files at a time).
Kindly guide for the same.
Regards,
Shaibaz

hi,
I have one doubt.
On other server (r3qas) the Umask settings are as followed
User UMASK value
<sid>adm 077
ora<SID> 077
root 077
Running SAP System : SAP R3 4.6C
Running DBMS : Oracle 9.0
Operating System :- HP_UX
On this system The new offline redo log files are created with 600 permissions. There is not a problem here, while taking the backup. I checked last "r3qas-archive" backups. There, i have not found any single error related to permissions, or any others (something like, Cannot open /oracle/RQ1/../.........dbf).
If everything is working fine, with this umask setting on this server, then, what's going wrong with the BW Quality server, which have the same umask settings (also others) for all the concerned users, as mentioned above.
Regards,
Bhavik Shroff

Moving the online redo log files to different location

We just installed few more drives into our sandbox system and I want to move the online redo log files for better performance. We've got the SAPARCH directory moved to a different location.
Does anyone know how/where I can change the parameters so redo log files are pointed at different drives? It's not in the init<SID>.ora file...
Regards,
Sumit

Hi Sumit,
The following link contains information about moving the redo logs:
http://www.stanford.edu/dept/itss/docs/oracle/9i/server.920/a96521/onlineredo.htm
Best regards,
Alwin

Purpose of ONLINE REDO LOG FILES - Media or Instance recovery or BOTH ?

Hi
Currently studying this topic for the 1z0-031 exam and am a little confused.
my books (from instructor led class) say
-redo logs are a mean to provide redo transactions in the event of a DATABASE recovery
-redo log buffer gets flushed to redo log files to provide a recovery mechanism in case of MEDIA FAILURE
Then it says
-Online redo log files are used in a situation such as an INSTANCE FAILURE to recover uncommitted data which has not yet been written to the data files
- online redo log files are used for RECOVERY only.
Am i misunderstanding? Or are redo log files for both MEDIA and INSTANCE recovery? Or just INSTANCE ?
confused....
Amanjit

Online Redo Log Files are used in a sense for both Media and Instance Recovery. If your database is in NoArchive Mode then you will only be able to use the Redo Log Files for instance recover. But if you are running in Archive Log Mode then Redo Log Files are archived and will allow you to recover from media failure.

How to reduce the size of redo log files

Hi,
I am using Oracle Database 9.2.0.1.0. My present redo log files are of 100 MB each
(redo01.log,redo02.log,redo03.log) which tooks more time to swicth the logs.
I want to change the size to 20MB each so that log switcjing will be faster.
Please let me know the exact step to resize the redo log files so that Ican change it.
Regards,
Indraneel

Technical questions cannot be answered here. Please, post in the right forum :
General Database Discussions

Where are BLOB Files stored when using redo log files.

I am using Archive Log Mode for my backups. I was wondering if Blob files get stored in the redo log files or if they are archived somewhere else?
Rob.

BLOB are just columns of some tables and are stored in related tablespace table by default in their own segments. Changes to BLOB columns are also stored in redo log more or less like any other column.
See an short example for default LOB storage in Re: CLOB Datatype [About Space allocation]
Edited by: P. Forstmann on 27 avr. 2011 07:20

How does LGWR write redo log files, I am puzzled!

The document says:
The LGWR concurrently writes the same information to all online redo log files in a group.
my undestandint of the sentence is following for example
group a includes file(a1, a2)
group b includes file(b1, b2)
LGWR write file sequence: write a1, a2 concurrently; afterwards write b1, b2 concurrently.
my question is following:
1、 my understanding is right?
2、 if my understanding is right, I think that separate log file in a group should save in different disk. if not, it cann't guarantee correctly recovery.
my opinion is right?
thanks everyone!

Hi,
>>That is multplexing...you should always have members of a log file in more than 1 disk
Exactly. You can keep multiple copies of the online redo log file to safeguard against damage to these files. When multiplexing online redo log files, LGWR concurrently writes the same redo log information to multiple identical online redo log files, thereby eliminating a single point of redo log failure. In addition, when multiplexing redo log files, it is preferable to keep the members of a group on different disks, so that one disk failure will not affect the continuing operation of the database. If LGWR can write to at least one member of the group, database operation proceeds as normal.
Cheers
Legatti

Redo log files in case of NOARCHIVELOG Mode.

Question is related with the oracle architure..
database requires a minimum of two redo log files to guarantee that one is always available for writing while the other is being archived, this sounds perfect when DB is running in ARCHIVELOG mode but at the same time it also forces database to have 2 redo log files even when the DB is running in NOARCHIVELOG mode?
Any particular reason..
I would look for reasons not answers on what redo log is and what information it holds etc..

pgoel wrote:
If you had only one file all further changes would have to stop until all changed data blocks had been written to disc. By insisting on a minimum of two log files Oracle can allow the log writer to fill the second log file as the database writer writes out the dirty blocks covered by changes desrcibed in the first log file.What about having a big size redo log file instead of two? Checkppoint being initiated when the redo log file is half filled
I mean, understand the logic, two is better, even best.. but still not getting convinced. I am just trying to think, can not Oracle work with 1 group with 1 big file..specailly when Noarch mode ? Having
Edited by: pgoel on Mar 12, 2011 7:27 PMNo, you still didn't understand and I am not sure how else we can say it. Okay, think about log groups as two buckets which are used to fill the redo content. The LGWR is filling one bucket at a time till it can't accept any more content. Once filled, rather than spilling the content out, it jumps over to the second bucket. Now, taking your statement of big sized redo, Pgoel, it doesn't matter how big sized bucket you bring in, eventually it will fill in. Its not possible that you wont be able to fill it , it just would take more longer than the normal timings. Thats all. So in any case , you need the second bucket. And I am not sure that why you are struck on the archivelog mode. I hope you do understand that its an optional mode. This means, this may or may not be there. If there, its a good thing that before doing the flush of the redo content, Oracle would be able to save the contents in the archived (think about the name, it's very meaning is to preserve, to archive) log file. If not, the redo content wuold be lost and there won't be any record of transactions leaving you to reenter the lost transactions. Its a meaningless point on which you are struck i.e. the archive or no-archivelog mode. Be it whatever, Oracle would still need minimum of the two log groups.
HTH
Aman....

Unassigned Status Of Standby Redo Log Files

I created 2 standby redo log groups, and use LGWR in primary site to
transfer redo data, all are good. But when I query the V$STANDBY_LOG
view, I found that the status column of my both standby redo logs is UNASSIGNED".
also sequence#
THREAD# and all others are 0 and 0.
Any explains.

Thanks for the reply Sophie. I did perform log switch at my primary site but the status of standby redo log files remained unassinged. I am pasting here the message in my Alert Log file may be that can help you to diagonose the problem.
ALTER DATABASE SET STANDBY DATABASE PROTECTED
Tue Jul 26 15:35:18 2005
Completed: ALTER DATABASE SET STANDBY DATABASE PROTECTED
Tue Jul 26 15:35:22 2005
ALTER DATABASE OPEN
Tue Jul 26 15:35:23 2005
LGWR: Primary database is in CLUSTER CONSISTENT mode
LGWR: Primary database is in MAXIMUM PROTECTION mode
LGWR: Destination LOG_ARCHIVE_DEST_1 is not serviced by LGWR
LNS0 started with pid=18
Tue Jul 26 15:35:28 2005
LGWR: Error 16086 verifying archivelog destination LOG_ARCHIVE_DEST_2
LGWR: Continuing...
Tue Jul 26 15:35:28 2005
Errors in file e:\oracle\admin\test\bdump\test_lgwr_1864.trc:
ORA-16086: standby database does not contain available standby log files
LGWR: Error 16086 disconnecting from destination LOG_ARCHIVE_DEST_2 standby host 'TESTstdb'
LGWR: Minimum of 1 applicable standby database required
Tue Jul 26 15:35:28 2005
Errors in file e:\oracle\admin\test\bdump\test_lgwr_1864.trc:
ORA-16072: a minimum of one standby database destination is required
LGWR: terminating instance due to error 16072
Instance terminated by LGWR, pid = 1864

Filled redo log files are available to LGWR for reuse

Similar Messages

Maybe you are looking for