Filr 1.1 android client error

I have a fresh filr 1.1 install (had to rebuild after failed 1.0.1 upgrade) small deployment. I am using a self-signed certificate and I cannot connect using android filr app. When I try to connect it first asks me if I want to accept the certificate (confirm or cancel) then it says "unable to connect. check URL and try again." I have tested with android 4.4 and 4.2 using filr app 1.1.0.888
I can connect with ipad on IOS8. Has anyone see similar behavior?
Thanks,
Aaron

Yes I have. Recently too on a small deployment.
It would appear that this issue is related to applying the POODLE patch. Now if you haven't done that then there is obviously something else amiss. I opened an SR with Novell on this very issue. I was able to connect on my smartphone (android) as I always had been but on new devices (android also) I was getting this exact error. Novell tested their end with a dummy account I set up and they were able to connect using IOS but not android.
They're looking into it. I'd suggest opening an SR with them if you haven't already. I'm in the process of rebuilding as luckily I wasn't gone live.

Similar Messages

  • Agentry Android Client Error

    Hi,
    I'm working on SMP 2.3 SP02 and using 6.1.2 Agentry Server, 6.1.2 Android Client. If Android device system language is English, Agentry Client works correctly. But when i change device system language, client gives error during transmit and shuts down.
    I've tried SP03 and SP04 but they both did not work.
    Thanks,
    Serkan Demir

    Hi Serkan,
    I have analyzed the issue of the problem.
    The problem of your error is as follows.
    When you transmitted your client or Android Agentry client (whatever version you use: 4.4, 4.4.2, 7.0.5.7, 7.0.6.2.48) is failing due to the client saw an updated definition from the server. The application is trying to download the new set of definition but your localized files are not properly loading.
    Your localizations/<overrideFiles>.tr.ini stated that you are not using any locale values ''. This means you are only using the named Country language - "tr".
    With this statement, you need to provide the needed override files for all the localization ini files.
    This includes the Enable.ini. You need to get Enable.tr.ini. In short, you need to make sure the Agentry system loads all the localizations properly. You need to make sure that nothing gets skipped.
    The main issue with skipping is that your timeStamp listed in your system showed that the definition is newer than your <OverrideFiles>.tr.ini.  This causes the application to try to load the application but due to your localization is not loading it is getting confuse and is failing on conversion.
    The technique is to play with the timeStamp of your application definition versus the override base files. The check Style is in Turkish but your localization files is not loaded so the conversion fails and you get the error (11).
    Potential actions:
    1. So you have to somehow work the system where you may try to load the application in English first (no conversion).
    2. So the application Check Style gets loaded without conversion.
    3. Then try to turn on your localization so that the application will start converting without downloading the application anymore.
    Another option:
    1) It could also be that your overrideFiles.tr.ini timeStamp has a time older than your application definition.
    2) You need to check the timeStamp of your overrideFiles.tr.ini and compare this to your Application/Development/<yourApplication> timeStamp.
    3) Check which one is newer.
    4) From the timeStamp determine why would the application load first before the override.
    5) As stated in my potential action above, we have to work the system to see how the application gets loaded so that conversion happens after the application update (probably on 2nd sync).
    Remember your error is that all your overrideFiles.tr.ini needs to be successfully loaded and not skipped. If you can do this it will work. Then you have to worry about other stuff that you need to do:
    A) Like making sure you have enabled the SAP language to sync with your SMP server. See http://service.sap.com/sap/support/notes/2116194 (for how to sync SAP timeZone with SMP test case).
    B) Setup your timeZoneAlias for your Android client to match SMP or SAP http://service.sap.com/sap/support/notes/1813025
    A and B step required in most time zone setup.
    Hope this helps.
    Mark Pe
    SAP Senior Support Engineer

  • Anyone using the ZMM Android Agent and Filr Android Client?

    If you are using the Android clients (ZMM and Filr), then once your Android device updates to Android 5.0/5.1 (or any new device you setup that comes...

    Hello, we need to remove urgently an MDM iOS Profile on iPhones/iPads.
    But we dont have a "remove" button in the profile. If we want to install a...

  • Subsite security trimming in the Office365 for Android client

    I just installed the Android Office365 client and noticed that subsite links are not security trimmed. Is this by design or can I influence this by settings in Sharepoint Online? If I click a subsite link I don't have permissions to I get the error "Can't
    complete task. Office Mobile encountered a problem."
    Just noticed this behaviour only applies if you're member at a site, then you'll see the links to all subsites in the Android client, even those you don't have permissions to. In the web interface those links are trimmed. If you only have visitor rights
    at the suprasite you only see the subsite links you have permissions for in the Android client.

    Hi,
    According to your post, my understanding is that you failed to click a subsite link in the Office365 for Android client.
    I rececomend to set a user as administrator and then sign in the site using the account to check whether it works.
    This forum is supproted for SharePoint On-Primse. Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
    Office 365 forum
    http://community.office365.com/en-us/forums/default.aspx
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • How to integrate 3D visual viewer with agentry android client

    Dear experts,
    I am working on SAP Work Manager 6.2,  integrating 3D visual viewer with agentry android client.
         - 3D Visualization is working with my WPF client
         - 3D Visualization is failing with my Android client (see below)
         - GIS is working on the same Android client.
    SAP® EAM and service mobile app SDK Installation Guide" version 1.0  indicates in step 5 to "Add Visual Enterprise libraries to the MobileAppsVELibrary project".  Could you confirm that this step is equivalent to copy contents of "DVL/Android/libs/" to libs folder of the MobileAppsVELibrary project? Is there other DLLs to copy in this step?
    3D Visualization on Android problem description:
    Code Levels:
    Eclipse => Luna 4.4.0 + ADT 23.0.4
    Agentry SDK => SMPAgentryClientFramework-Android-70.5.1.10.zip
    Mobile Apps Open UI SDK 1.0 => 51048778_5.zip
    SAP 3D SDK => SAP3DVisualEnterpriseApplicationsSDKv2_1.zip
    PB description:
    If I display VDS attachment, the screen is blank.
    ( If I display the 2nd attachment (image/jpeg), the image is displayed successfully on the Android device )
    ( If I click on the Locations link , the map is displayed successfully )
    I do not see an error the the android log.
    I am also getting some encrypted information on the Android client when I double click the blank screen and hit left/right arrows
    Regards.
    Regards.

    Hi Kunal,
    Thanks for your help. How do I checked that I have properly included the DVL libraries?
    I have implemented the following steps: (text in italic is extracted from the SAP® EAM and service mobile app SDK Installation Guide" )
    Thanks again. Didier.
    1. Add the Agentry SDK - Follow the instructions from the Open UI SDK documentation to set up the Android environment with Agentry Open UI projects in Eclipse.
    2. Add Common Library project in Eclipse
    3. Add VE Library project in Eclipse
    I have created the following projects from the files
    SMPAgentryClientFramework-Android-70.5.1.10.zip
    Mobile Apps Open UI SDK 1.0.51048778_5.zip
    b. Add MobileAppsVELibrary as a library in the AgentryAndroidClientSolution project.
    c. Copy the activities declaration
    　AndroidManifest.xml
    4. Add VE Resources Library project in Eclipse
    5. Add Visual Enterprise libraries to the MobileAppsVELibrary project
    I have copy the libDVL.so files into AgentryAndroidClientSolition libs folder from the file SAP3DVisualEnterpriseApplicationsSDKv2_1.zip

  • SP3 and PC\IOS\Android clients.

    Hello
    Som after implementing sp3 for MDocs I cannot use PC. iOS and Android clients. Web interface works fine.
    Logs from android (same for iOS):
    2014-12-10 14:31:32.878 TRACE ApacheClientHttpInvoker: GET https://server/mcm/json/mydocuments/root?objectId=100900e4-6e1c-3110-3d83-8e6180a988da&cmisselector=object&filter=cmis%3AbaseTypeId%2Ccmis%3AchangeToken%2Ccmis%3AcontentStreamLength%2Ccmis%3AcontentStreamMimeType%2Ccmis%3AcreatedBy%2Ccmis%3AcreationDate%2Ccmis%3AlastModificationDate%2Ccmis%3AlastModifiedBy%2Ccmis%3Aname%2Ccmis%3AobjectId%2Ccmis%3AobjectTypeId&includeAllowableActions=true&includeRelationships=none&renditionFilter=cmis%3Anone&includePolicyIds=false&includeACL=false&succinct=true > Headers: {Date=[Wed, 10 Dec 2014 10:31:37 GMT], Server=[nginx], cache-control=[private, max-age=0], Transfer-Encoding=[chunked], Content-Type=[application/json;charset=UTF-8], content-encoding=[gzip], Connection=[keep-alive]}
    2014-12-10 14:31:32.921 DEBUG SettingsAdapter: List item at position 7 is being rendered: 2131493071
    2014-12-10 14:31:32.938 ERROR MetadataDownloadThread: Error ERROR_SESSION_EXPIRED in metadata thread processing task (repository mydocuments, Low, SyncedItemsRefresh, Folder: [100900e4-6e1c-3110-3d83-8e6180a988da])
    org.apache.chemistry.opencmis.commons.exceptions.CmisPermissionDeniedException: INVALID_TOKEN_PROVIDED
         at org.apache.chemistry.opencmis.client.bindings.spi.browser.AbstractBrowserBindingService.convertStatusCode(AbstractBrowserBindingService.java:257)
         at org.apache.chemistry.opencmis.client.bindings.spi.browser.AbstractBrowserBindingService.read(AbstractBrowserBindingService.java:361)
         at org.apache.chemistry.opencmis.client.bindings.spi.browser.ObjectServiceImpl.getObject(ObjectServiceImpl.java:278)
         at org.apache.chemistry.opencmis.client.runtime.SessionImpl.getObject(SessionImpl.java:519)
         at org.apache.chemistry.opencmis.client.runtime.SessionImpl.getObject(SessionImpl.java:497)
         at com.sap.mcm.android.util.CmisUtil.getCmisObjects(CmisUtil.java:96)
         at com.sap.mcm.android.sync.impl.SyncedItemsRefreshOperation.execute(SyncedItemsRefreshOperation.java:32)
         at com.sap.mcm.android.sync.impl.MetadataDownloadThread.run(MetadataDownloadThread.java:158)
    2014-12-10 14:31:33.071 DEBUG MetadataDownloadThread: Requeued failed task (repository mydocuments, Low, SyncedItemsRefresh, Folder: [100900e4-6e1c-3110-3d83-8e6180a988da])
    2014-12-10 14:31:33.074 DEBUG MetadataDownloadThread: Reconnecting session for repository mydocuments
    But for PC (it also is newest) client logs looks different:
    2013 23 Oct 06:42:19 [MCM Multiple Instance Listener] ERROR com.sap.mcm.util.SingleInstancePortListener  - Error while creating server socket! java.net.BindException: Address already in use: JVM_Bind at java.net.DualStackPlainSocketImpl.bind0(Native Method) at java.net.DualStackPlainSocketImpl.socketBind(DualStackPlainSocketImpl.java:96) at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:376) at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:175) at java.net.ServerSocket.bind(ServerSocket.java:376) at java.net.ServerSocket.(ServerSocket.java:237) at java.net.ServerSocket.(ServerSocket.java:128) at com.sap.mcm.util.SingleInstancePortListener.run(SingleInstancePortListener.java:20) 2013 23 Oct 06:42:19 [MCM Multiple Instance Listener] ERROR com.sap.mcm.util.SingleInstancePortListener  - Error while creating server socket! java.net.BindException: Address already in use: JVM_Bind at java.net.DualStackPlainSocketImpl.bind0(Native Method) at java.net.DualStackPlainSocketImpl.socketBind(DualStackPlainSocketImpl.java:96) at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:376) at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:175) at java.net.ServerSocket.bind(ServerSocket.java:376) at java.net.ServerSocket.(ServerSocket.java:237) at java.net.ServerSocket.(ServerSocket.java:128) at com.sap.mcm.util.SingleInstancePortListener.run(SingleInstancePortListener.java:20) 2013 23 Oct 06:42:19 [MCM Multiple Instance Listener] ERROR com.sap.mcm.util.SingleInstancePortListener  - Error while creating server socket! java.net.BindException: Address already in use: JVM_Bind at java.net.DualStackPlainSocketImpl.bind0(Native Method) at java.net.DualStackPlainSocketImpl.socketBind(DualStackPlainSocketImpl.java:96) at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:376) at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:175) at java.net.ServerSocket.bind(ServerSocket.java:376) at java.net.ServerSocket.(ServerSocket.java:237) at java.net.ServerSocket.(ServerSocket.java:128) at com.sap.mcm.util.SingleInstancePortListener.run(SingleInstancePortListener.java:20) 2013 23 Oct 06:42:41 [Thread-0] ERROR com.sap.mcm.util.Setup  -
    Client already running!
    But of course I checked and it is not running twice... Thanks for helping.

    Hi, It will be better if you open a OSS ticket for this.

  • Lync 2013 android client fails to login bug when ISP overrides DNS

    Hello all,
    I've noticed an issue occurring in the latest Android client (as of 3/9/2015) with internet networks where the provider resolves all DNS queries to an IP address (e.g. T-Mobile, Cox Cable, and lots of others).
    Essentially, sometimes I have noticed my android client stuck on "Signing in".  The diagnostic logs show that the client is attempting to resolve http://lyncdiscover.contoso.com (which is not resolvable
    externally), but T-Mobile is sending it into a search engine.  The app continues to try to connect despite not realizing that it really did not resolve properly.  See below logs.
    <html><head><meta http-equiv="refresh" content="0;url=http://lookup.t-mobile.com/index.php?origURL=http://lyncdiscoverinternal.contoso.com/"/></head><body><script type="text/javascript">window.location="http://lookup.t-mobile.com/index.php?origURL="+escape(window.location)+"&r="+escape(document.referrer);</script></body></html>
    </ReceivedResponse>
    Mar 9, 2015 8:26:50 AM ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/common/private/TransportUtilityFunctions.cpp/1874:Accept-types (application/vnd.microsoft.rtc.autodiscover+xml;v=1) not found in Content-Type response from server (text/html). Not decoding.
    Mar 9, 2015 8:26:50 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x9a306048)
    Mar 9, 2015 8:26:50 AM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/private/CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
    Mar 9, 2015 8:26:50 AM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/private/CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = http://lyncdiscoverinternal.contoso.com/, Hops = 1, status = E_ResponseUnknown (E2-1-5)
    Mar 9, 2015 8:26:50 AM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/private/CTransportRequestRetrialQueue.cpp/725:Response received for req. UrlTrustResolver(0x9a306048): E_ResponseUnknown (E2-1-5) (RemoteNetworkPermanentError); Done with req.; Stopping resend timer
    Mar 9, 2015 8:26:50 AM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/private/CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent received. Status = E_ResponseUnknown (E2-1-5), url = http://lyncdiscoverinternal.contoso.com/
    Mar 9, 2015 8:26:50 AM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/private/CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = http://lyncdiscoverinternal.contoso.com/?sipuri=sip:[email protected], userUrl = , status = E_ResponseUnknown (E2-1-5)
    Mar 9, 2015 8:26:50 AM DEBUG SigningInActivity: onStop()
    Mar 9, 2015 8:26:50 AM DEBUG SigninActivity: onStop()
    Mar 9, 2015 8:27:20 AM DEBUG HubActivity: onPause()
    Mar 9, 2015 8:27:20 AM DEBUG MyStatusFragment: onPause()
    Mar 9, 2015 8:27:20 AM DEBUG ContactsFragment: onPause()
    Mar 9, 2015 8:27:20 AM DEBUG HubActivity: onStop()
    Mar 9, 2015 8:27:20 AM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/objectmodel/private/CApplication.cpp/944:CApplication::serialize() called
    Mar 9, 2015 8:27:20 AM VERBOSE LYNC: VERBOSE APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/privateandroid/CCredentialStore.cpp/90:storing credentials for service:0
    Mar 9, 2015 8:27:20 AM VERBOSE LYNC: VERBOSE APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/privateandroid/CCredentialStore.cpp/90:storing credentials for service:1
    Mar 9, 2015 8:27:20 AM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/objectmodel/private/CBasePersistableEntity.cpp/179:Storing 1 out-of-sync Object Models took 32ms
    Mar 9, 2015 8:27:20 AM INFO LYNC: INFO UTILITIES /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/platform/persistentstorage/private/CBasePersistableComponent.cpp/245:Storing 3 out-of-sync components took 1ms
    Mar 9, 2015 8:27:20 AM INFO PreferencesManager: commit is called on
    Mar 9, 2015 8:27:20 AM DEBUG MyStatusFragment: onStop()
    Mar 9, 2015 8:27:20 AM DEBUG ContactsFragment: onStop()
    Mar 9, 2015 8:27:27 AM ERROR HttpConnection: org.apache.http.conn.HttpHostConnectException: Connection to https://lyncdiscoverinternal.contoso.com refused
    at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:183)
    at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:164)
    at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:119)
    at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:360)
    at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:555)
    at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:487)
    at com.microsoft.office.lync.platform.http.HttpEngine.execute(HttpEngine.java:502)
    at com.microsoft.office.lync.platform.http.HttpConnection$1.run(HttpConnection.java:219)
    at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:422)
    at java.util.concurrent.FutureTask.run(FutureTask.java:237)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1112)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:587)
    at java.lang.Thread.run(Thread.java:818)
    Caused by: java.net.ConnectException: failed to connect to /198.105.244.104 (port 443) after 180000ms: isConnected failed: ECONNREFUSED (Connection refused)
    at libcore.io.IoBridge.isConnected(IoBridge.java:238)
    at libcore.io.IoBridge.connectErrno(IoBridge.java:171)
    at libcore.io.IoBridge.connect(IoBridge.java:122)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:183)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:456)
    at java.net.Socket.connect(Socket.java:882)
    at org.apache.http.conn.scheme.PlainSocketFactory.connectSocket(PlainSocketFactory.java:119)
    at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:144)
    ... 12 more
    Caused by: android.system.ErrnoException: isConnected failed: ECONNREFUSED (Connection refused)
    at libcore.io.IoBridge.isConnected(IoBridge.java:223)
    ... 19 more
    Since DNS overrides by ISPs are a common occurance, I believe the app should properly handle this situation.  I installed an app to override my DNS and use Google's DNS servers, and the client connects fine.

    Hi,
    Did you login Lync 2013 mobile client internal or external the company?
    Did the issue also happen for IOS/Windows Phones or just happen for Android Phones?
    Please try to check if the issue only happen for your mobile Lync client or also happen for other Android mobile clients.
    If the issue only happen for your Android mobile, please try to uninstall Lync client and install the latest version from Android Market and test the issue again.
    If the issue happen for multiple mobile clients, please double check the Reverse Proxy settings, if you use IIS ARR for Reverse Proxy, you can troubleshooting with the help of the link below:
    http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].
    Eason Huang
    TechNet Community Support
    Ok, I figured out that I had a partial misconfiguration, but the existing client behavior still leads to long delays on a variety of networks.  I had the reverse proxy forwarding into port 80 instead of 8080, which seemingly caused problems
    during the second autodiscovery phase after the first timed out.   I have since confirmed that it's not just T-Mobile, but any such provider (e.g. Cox Cable, see below) that resolves all DNS entries.
    Essentially, the following is happening:
    1) Client attempts to resolve lyncdiscoverinternal first.
    2) DNS record resolves to ISP's website, because they resolve everything and will return their own page if the entry really doesn't exist.
    3) Lync client continues to try to connect to the ISP's address, and sits for at least a minute until it eventually falls to the lyncdiscover record.
    From the below log entries, you can see that the login process is delayed a full minute due to the client being stuck on the lyncdiscoverinternal record!  Again, this does not occur on ISPs that do not catch all DNS resolution
    attempts, regardless of validity.
    Mar 9, 2015 8:10:04 PM INFO HttpConnection: originalurl is
    https://lyncdiscoverinternal.contoso.com/?sipuri=sip:[email protected] method Get
    Mar 9, 2015 8:10:04 PM INFO HttpConnection: decodedurl is
    https://lyncdiscoverinternal.contoso.com/?sipuri=sip:[email protected]
    Mar 9, 2015 8:10:04 PM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/common/private/TransportUtilityFunctions.cpp/689:<SentRequest>
    GET
    https://lyncdiscoverinternal.contoso.com/?sipuri=sip:[email protected] 9, 2015 8:10:05 PM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/private/CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
    completed with url =
    http://lyncdiscoverinternal.contoso.com/?sipuri=sip:[email protected], userUrl = , status = E_ResponseUnknown (E2-1-5)
    GET http://lyncdiscoverinternal.contoso.com/
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "<html><head><meta">http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html><head><meta
    http-equiv="refresh" content="0;url=http://finder.cox.net/main?InterceptSource=0&ClientLocation=us&ParticipantID=96e687opkbv4scrood8k84drs6gw5duf&FailureMode=1&SearchQuery=&FailedURI=http%3A%2F%2Flyncdiscoverinternal.contoso.com%2F&AddInType=4&Version=2.1.8-1.90base&Referer=&Implementation=0&method=GET"/><script
    type="text/javascript">url="http://finder.cox.net/main?InterceptSource=0&ClientLocation=us&ParticipantID=96e687opkbv4scrood8k84drs6gw5duf&FailureMode=1&SearchQuery=&FailedURI=http%3A%2F%2Flyncdiscoverinternal.contoso.com%2F&AddInType=4&Version=2.1.8-1.90base&Referer=&Implementation=0&method=GET";if(top.location!=location){var
    w=window,d=document,e=d.documentElement,b=d.body,x=w.innerWidth||e.clientWidth||b.clientWidth,y=w.innerHeight||e.clientHeight||b.clientHeight;url+="&w="+x+"&h="+y;}window.location.replace(url);</script></head><body></body></html>
    </ReceivedResponse>
    Mar 9, 2015 8:10:21 PM INFO LYNC: INFO APPLICATION /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/applicationlayer/infrastructure/private/CUcwaDataSynchronizer.cpp/799:Mode 0
    timed out
    Mar 9, 2015 8:11:08 PM ERROR HttpConnection: org.apache.http.conn.HttpHostConnectException:
    Connection to https://lyncdiscoverinternal.contoso.com refused
     at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:183)
    Mar 9, 2015 8:11:08 PM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/common/private/TransportUtilityFunctions.cpp/1032:<ReceivedResponse>
    GET http://lyncdiscover.contoso.com/

  • Epson SX218 doesn't print (client-error-document-format-not-supported)

    Hi there,
    I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
    Here's what I've done so far:
    I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
    I installed epson-inkjet-printer-workforce-sx218 from AUR
    I started cups...
    Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
    I searched the forums for a solution
    I installed cups-usblp and reinstalled all the cups stuff
    Printer got recognized! Yay!
    So, now the printer is set up in cups using the avasys driver. But...
    It doesn't print!
    When I try to print a test page via the cups webinterface it keeps telling me
    Unsupported format "application/vnd.cups-banner".
    The following packages are installed now:
    $ pacman -Qs cups
    local/cups-usblp 1.5.0-1
    local/libcups 1.5.0-1
    $ pacman -Qs foomatic
    local/foomatic-db 1:4.0.7_20110707-1
    local/foomatic-db-engine 1:4.0.7_20110707-1
    local/foomatic-db-nonfree 1:4.0.7_20110707-1
    local/foomatic-filters 1:4.0.7_20110707-1
    $ pacman -Qs epson
    local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
    $ pacman -Qs ghostscript
    local/ghostscript 9.04-5
    Here's my cups error log:
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
    D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
    D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
    I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
    I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
    D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:01 +0100] Report: clients=1
    D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
    D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
    D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
    D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
    D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
    D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
    D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
    I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
    D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
    D [01/Jan/2012:18:59:35 +0100] Script header:
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:00:23 +0100] Report: clients=1
    D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
    D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:19:03 +0100] Report: clients=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:22:10 +0100] Report: clients=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:24:21 +0100] Report: clients=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:27:26 +0100] Report: clients=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:37:11 +0100] Report: clients=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
    I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
    I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
    D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
    I [01/Jan/2012:19:38:18 +0100] Full reload is required.
    I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:19:38:19 +0100] Full reload complete.
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
    D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
    D [01/Jan/2012:19:38:20 +0100] Report: clients=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
    I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
    I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
    D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
    I [01/Jan/2012:20:54:26 +0100] Full reload is required.
    I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:20:54:27 +0100] Full reload complete.
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
    D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
    D [01/Jan/2012:20:54:28 +0100] Report: clients=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
    I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
    D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
    I [02/Jan/2012:05:35:05 +0100] Full reload is required.
    I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:05:35:06 +0100] Full reload complete.
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
    D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
    D [02/Jan/2012:05:35:07 +0100] Report: clients=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
    I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
    D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
    I [02/Jan/2012:17:22:51 +0100] Full reload is required.
    I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:17:22:52 +0100] Full reload complete.
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
    D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
    D [02/Jan/2012:17:22:53 +0100] Report: clients=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
    E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
    E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
    W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
    Thank you very much!

    Hi Radhakrishnan,
    ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
    I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
    regards,
    Stewart

  • KDE Printer Manager fails with "client-error-bad-request"

    I'm having some trouble with printing on my system. The KDE printer manager shows "client-error-bad-request" and no other information. When I run the KCM from the command line, I also get "kcmshell(17286) KCupsRequest::serverError: status unrecognised:  1024" on the console. I wasn't able to find any useful information on this issue on google or these forums; not even what the 1024 status code means. It seems to me that this may be a bug in the kcm_printer_manager module, but I'd like to rule out other possibilities first. Unfortunately, I don't know what to try from here. I'll provide as much potentially relevant information as I can think of below.
    Changes since last successful print job:
    Multiple updates to KDE packages
    Update to cups that changed systemd unit file names.
    Stopped and disbled old units
    daemon-reload
    Enable and start new units
    Other updates to cups since then, if I recall correctly.
    Packages and versions:
    kdeutils-print-manager 4.14.3-1 (owns kcm_printer_manager module for kcmshell4)
    kdebase-runtime 4.14.3-1 (owns kcmshell4 binary)
    cups 2.0.1-1
    libcups 2.0.1-1
    systemd 218-1
    linux 3.17.6-1
    Let me know if any other information might be helpful.

    Anyone please help.
    Thanks,
    Orton

  • Large XML Publisher reports fail with client-error-request-value-too-long

    We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2 (ATG.H RUP 5), and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
    The exact error message is as follows:
    lp: unable to print file: client-error-request-value-too-long
    Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
    Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
    Pasta: Error: Preprocess or Print command failed!!!
    APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
    Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
    Action: Review your concurrent request log file for more detailed information.
    I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
    Has anyone had this issue with BI Publisher on Linux?

    Thanks for the link. It looks like the sysadmins have throttled cups to low to allow large bitmapped print jobs:
    grep MaxRequestSize cupsd.conf
    # MaxRequestSize: controls the maximum size of HTTP requests and print files.
    MaxRequestSize 10M
    I am trying to get a more reasonable size limit.

  • Large BI Publisher reports fail with client-error-request-value-too-long

    We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2, and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
    The exact error message is as follows:
    lp: unable to print file: client-error-request-value-too-long
    Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
    Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
    Pasta: Error: Preprocess or Print command failed!!!
    APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
    Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
    Action: Review your concurrent request log file for more detailed information.
    I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
    Has anyone had this issue with BI Publisher on Linux?

    The linux sysadmins set the cups max_request_size at 10 MB, which was causing this error. Once the restriction was lifted, the reports ran without error.

  • Operation could not be completed. client error not possible.

    I have a mac mini running OS10.5.8. All of a sudden I can not print with my HP1315v all in one printer. I can print a test but that is all. I get this message. "Operation could not be completed, Client error no possible". I re-installed the HP software but that didn't help. I ran a permissions repair with Disk Untilities but that didn't correct the problem. Any help would be appreciated. :-) Dave

    I can't help, because I'm getting the same ERROR suddenly with my Samsung ML-2010 laser printer. NOTHING will print and the "Status" of the print job(s) all show "Stopped". It's driving me nuts!
    For some bizarre reason, I can still print to my other printer, a HP laserjet 2550L. It does not see to be affected in the least.
    Anyone got any ideas for a remedy?

  • "Client error not found" = DOOOOOOOOMMMMMM!!!!!!!

    Ok been getting this a lot recently and I think it is to do with my printer setup script. There must be a way to fix it, but for the life of me I can not find the solution.
    It usually starts with all printers on the system being paused. You can unpause them, but as soon as you try print they automatically pause again.
    You can reset the print system, but when you try readd a printer you get the message of doom "client-error-not-found".
    From then on I can not add any printer to the system and the only fix is a wipe and reinstall.
    I mentioned above that I use a printer script to install the 10+ printers in the office onto the 80+ machines. All the machines are running 10.5 and upto date.
    I have put the script to have a look at, but even if it is causing the problem there should be a way to fix the issue.
    #Reset print system.
    do shell script "lpstat -p | cut -d' ' -f2 | xargs -I{} lpadmin -x {}" with administrator privileges
    #log onto the server and mounts the IT_support folder. If the IT_support folder is already mounted it will skip the mount and move on.
    if {"IT_support"} is not in paragraphs of (do shell script "/bin/ls /Volumes") then
    mount volume "afp://192.168.1.251/IT_support"
    end if
    do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/drivers/* /Library/printers/PPDs/Contents/Resources/" with administrator privileges
    #Add the printers to the system.
    #Colour Printers.
    #Colour_Printroom Appletalk.
    do shell script "lpadmin -p Colour_PrintRoom -L FirstFloorPrintRoom -E -v pap://*/Colour_PrintRoom/LaserWriter -P /Library/printers/PPDs/Contents/Resources/xrx7655.ppd -o printer-is-shared=false" with administrator privileges
    #Colour_Kitchen Appletalk.
    do shell script "lpadmin -p Colour_Kitchen -L First\\ Floor\\ Kitchen -E -v pap://*/DC3535_DC3535Print/LaserWriter -P /Library/printers/PPDs/Contents/Resources/Xerox\\ DocuColor3535\\ PS -o printer-is-shared=false" with administrator privileges
    #BizHub Appletalk.
    do shell script "lpadmin -p Colour_BizHub -L Colour_BizHub -E -vpap://*/X3eBizhub45035C-KMPrint/LaserWriter -P /Library/printers/PPDs/Contents/Resources/en.lproj/Fiery\\ X3eTY\\ 35C-KM\\ PS\\ v2.01\\ eu -o printer-is-shared=false" with administrator privileges
    #Admin Printers.
    #Reception Bonjour.
    do shell script "lpadmin -p Reception -L Ground\\ Floor\\ Reception -E -v mdns://Reception%20%2892%3A1b%3A58%29.pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
    #A3_Northside Bonjour.
    do shell script "lpadmin -p A3_Northside -L First\\ Floor\\ North\\ Side -E -v mdns://A3Northside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
    #A3_Southside Bonjour.
    do shell script "lpadmin -p A3_Southside -L First\\ Floor\\ South\\ Side -E -v mdns://A3Southside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
    #Studio3_Admin Bonjour.
    do shell script "lpadmin -p Studio3_Admin -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
    #Studio1_Admin Bonjour.
    do shell script "lpadmin -p Studio1_Admin -L First\\ Floor\\ Studio\\ 1 -E -v mdns://Studio1Admin%20%2892%3A41%3Af6%29._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
    #Studio3_A3 Bonjour.
    do shell script "lpadmin -p Studio3_A3 -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3A3._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ LaserJet\\ 5100\\ Series.gz -o printer-is-shared=false" with administrator privileges
    #Plotters.
    #PlotterDeathstarHP4500ps Bonjour.
    do shell script "lpadmin -p PlotterDeathStarHP4500ps -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterDeathstar_HP4500ps._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ Designjet\\ 4500\\ PS3.gz -o printer-is-shared=false" with administrator privileges
    #PlotterPosterEpson7600 Bonjour.
    do shell script "lpadmin -p PlotterPosterEpson7600 -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterPosterEpson7600.printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/en.lproj/stp-escp2-7600.5.2.ppd.gz -o printer-is-shared=false" with administrator privileges
    #Copy a fresh copy of the printer driver settings back onto the system after the printers have been installed. driver settings are stored in /etc/cups/PPD admin rights required to copy files into this folder
    do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/ppd/* /etc/cups/PPD" with administrator privileges
    #Copy printer presets on to system.
    do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences" with administrator privileges
    #The following printer is added into the system speratly due to a driver selection issue when adding more than one Xerox Phaser 4510DT. The system seems to apply the correct driver to the first one that is added to the system. The second Xerox Phaser 4510DT does not get the correct driver applied to it.
    #Studio2_Admin Bonjour.
    do shell script "lpadmin -p Studio2_Admin -L First\\ Floor\\ Studio\\ 2 -E -v mdns://Studio2Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
    #Copy printer presets on to system.
    do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences"
    do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04_Printers/PrinterAutoInstall/ppd/Studio2Admin.ppd /etc/cups/PPD/" with administrator privileges
    #Reset file permissions
    do shell script "chmod 664 /Library/Printers/PPDs/Contents/Resources/*" with administrator privileges

    Well, I succeeded in solving the problem by myself ...
    The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

  • Can't delete printer - client-error-not-found

    After messing around with the installation of a cups based network printer (via a local Suse server) I came across some strange problems with my printer setup utility. Currently, I can neither delete nor add a printer from the list for the current user. When trying to delete a previously installed network printer I get an error message that the printer could not be removed (client-error-not-found). When trying to add a new printer I won't get an error message, but the printer is not being added to the list anyhow.
    I already tried to reset the printing system both with the printer setup utility and with the Printer Setup Repair Tool from Fixamac, both without success.
    I have to note that for user root everything works fine!
    Any suggestions?
    Wolfgang
    MacBook Pro   Mac OS X (10.4.8)  

    Well, I succeeded in solving the problem by myself ...
    The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

  • Invalid lv client error

    I created a .Net interop assembly with LV2009 and added it to a Visual Studio 2005 VB.net project.  When I run the project I get a "Invalid LV Client" error when it calls one of the functions in the interop assembly.
    Anyone got any ideas on this?
    Thanks!

    Hi there,
    Here are a couple of things that you could perhaps try to resolve this issue.
    Below is the Help link on how to build a .NET Interop,
    http://zone.ni.com/reference/en-XX/help/371361F-01​/lvhowto/building_a_net_assembly/
    it might be a case of making the .NET interop again following the guidance above ensuring every function prototype is properley defined, as this may cause a problem.
    Otherwise, you could use the Driver export wizard in LabVIEW 6.1, this is no longer included since LabVIEW 8.2.
    Please let me know if this helps!
    Liam A.
    National Instruments
    Applications Engineer

Maybe you are looking for

  • SQL Query in Procedure...

    Hi , I have to build a view dynamically using procedure like this: create or replace procedure call_get(arg1 in varchar2 default null,arg2 in varchar2 default null,arg3 in varchar2 default null) is begin execute immediate 'create or replace view v_ge

  • Occasionally when I paste settings, everything goes green...

    Does anyone know why this is? I copy settings, and paste them to one or many other photographs in the Library module, and some of those images that I have pasted to, will have a green tint. (See bottom left). Any help greatly appreciated. Mac OSX 10.

  • Captcha on the way?

    Hi, I was really interested with your product however, Captcha must be on the way as an option in your form product for it to be a serious contender with other software we use? Peter

  • I can't print images on anything but 4X6 inch paper. What am I doing wrong?

    Print settings and preferences have to be set to the size of media that you want to print on. Some imaging software will default to 4X6 inch photo paper, when you select printing a "photo" or "borderless image" for printing. The settings need to be a

  • Dreamweaver cs3 Layout Clear Floats

    Have two sidebar divs and a maincontent div in the middle with a header at the top. In IE7 it displays incorrectly by moving the maincontent down below the clear float. Any help would be great.