Filr 1.1 LDAP Preview Not Returning Correct Number of Result
I'm finishing set up of Filr 1.1 in our environment but noticed today that the LDAP preview does not return the correct number of results. The query:
(&(objectClass=Person)(|(employeeType=E)(employeeT ype=Y)(employeeType=Z)))
has been tried against multiple AD domain controllers and has so far returned 3 different user counts - 2895, 2800, and 2700. Mostly it always returns 2800. The correct count using powershell with the exact same ldap filter is over 5000.
I would prefer not to try a sync until I have some confidence that it will complete successfully. Any suggestions?
On Wed, 22 Apr 2015 17:26:03 GMT, jameswatson3
<[email protected]> wrote:
>
> I'm finishing set up of Filr 1.1 in our environment but noticed today
> that the LDAP preview does not return the correct number of results. The
> query:
>
> (&(objectClass=Person)(|(employeeType=E)(employeeT ype=Y)(employeeType=Z)))
>
> has been tried against multiple AD domain controllers and has so far
> returned 3 different user counts - 2895, 2800, and 2700. Mostly it
> always returns 2800. The correct count using powershell with the exact
> same ldap filter is over 5000.
>
> I would prefer not to try a sync until I have some confidence that it
> will complete successfully. Any suggestions?
Could you try it with filr 1.2?
https://download.novell.com/Download...d=q-mgVFDsOKQ~
Similar Messages
-
LDAP not returning correct number of results through Java?
Hello all,
I've written a little testing application for my new shiny LDAP server and have the following method in it, which performs a search based on department number:
public Vector searchLDAP(String depNumber) throws NamingException
String uid;
String mobile;
String givenName;
String sn;
String telephoneNumber;
String departmentNumber;
String employeeType;
String employeeNumber;
String reportsTo;
Vector people = new Vector();
Attributes matchAttributes = new BasicAttributes(false);
matchAttributes.put(new BasicAttribute("departmentnumber", depNumber));
NamingEnumeration results = ctx.search(base, matchAttributes);
SearchResult tempSR;
Attributes tempAtt;
LDAPPerson tmp;
while(results.hasMore())
uid = "";
mobile = "";
givenName = "";
sn = "";
telephoneNumber = "";
departmentNumber = "";
employeeType = "";
employeeNumber = "";
reportsTo = "";
tempSR = (SearchResult) results.next();
tempAtt = tempSR.getAttributes();
if(atts.get("uid")!=null)
uid = (String)atts.get("uid").get();
if(atts.get("mobile")!=null)
mobile = (String)atts.get("mobile").get();
if(atts.get("givenname")!=null)
givenName = (String)atts.get("givenname").get();
if(atts.get("sn")!=null)
sn = (String)atts.get("sn").get();
System.out.println("Working with " + sn);
if(atts.get("telephonenumber")!=null)
telephoneNumber = (String)atts.get("telephonenumber").get();
if(atts.get("departmentNumber")!=null)
departmentNumber = (String)atts.get("departmentNumber").get();
if(atts.get("employeeType")!=null)
employeeType = (String)atts.get("employeeType").get();
if(atts.get("employeenumber")!=null)
employeeNumber = (String)atts.get("employeeNumber").get();
if(atts.get("reportsTo")!=null)
reportsTo = (String)atts.get("reportsTo").get();
tmp = new LDAPPerson(uid, mobile, givenName, sn, telephoneNumber, departmentNumber, employeeType, employeeNumber, reportsTo);
people.add(tmp);
return people;
}But for some reason (perhaps too much coding and not enough coffee?) I get the same person's details twice, instead of the two users I'm a) expecting and b) have retrieved using ldapsearch on the command line.
Have I done something really stupid or is there something I'm not aware of?
Thanks!
GemmaHello Gemma!
I think you have used a global class attribute atts and not tempAttr. So you get anything else but not what you wish.
So i think you should change the code in the following way,
i thing it should work ...
(Sorry for the bad code formatting ...)
Greetings
public Vector searchLDAP(DirContext ctx, String base, String depNumber) throws NamingException
String uid;
String mobile;
String givenName;
String sn;
String telephoneNumber;
String departmentNumber;
String employeeType;
String employeeNumber;
String reportsTo;
Vector people = new Vector();
Attributes matchAttributes = new BasicAttributes(false);
matchAttributes.put(new BasicAttribute("departmentnumber", depNumber));
NamingEnumeration results = ctx.search(base, matchAttributes);
while(results.hasMore())
uid = "";
mobile = "";
givenName = "";
sn = "";
telephoneNumber = "";
departmentNumber = "";
employeeType = "";
employeeNumber = "";
reportsTo = "";
SearchResult tempSR = (SearchResult) results.next();
Attributes atts = tempSR.getAttributes();
if(atts.get("uid")!=null)
uid = (String)atts.get("uid").get();
if(atts.get("mobile")!=null)
mobile = (String)atts.get("mobile").get();
if(atts.get("givenname")!=null)
givenName = (String)atts.get("givenname").get();
if(atts.get("sn")!=null)
sn = (String)atts.get("sn").get();
System.out.println("Working with " + sn);
if(atts.get("telephonenumber")!=null)
telephoneNumber = (String)atts.get("telephonenumber").get();
if(atts.get("departmentNumber")!=null)
departmentNumber = (String)atts.get("departmentNumber").get();
if(atts.get("employeeType")!=null)
employeeType = (String)atts.get("employeeType").get();
if(atts.get("employeenumber")!=null)
employeeNumber = (String)atts.get("employeeNumber").get();
if(atts.get("reportsTo")!=null)
reportsTo = (String)atts.get("reportsTo").get();
LDAPPerson tmp = new LDAPPerson(uid, mobile, givenName, sn, telephoneNumber, departmentNumber, employeeType, employeeNumber, reportsTo);
people.add(tmp);
return people; -
Query not returning correct number of records
Hi Guys,
Can someone please tell me why this query is not retrieving the correct number of records.
I have a table with six users
FIRST_NAME LAST_NAME
David Robert
Martin Fisher
Henry Robert King
Edmund Tomkinson
Williams Hayes Robert
Tina Belkins
When I run a query, SELECT * FROM USERS WHERE LAST_NAME LIKE 'Robert';
I only get 1 record back (David Robert). Is the space between the last name
causing this? If yes, How can I rewite the query?show a copy-paste example of your query...
you need to use a wild card with LIKE, as in
SQL> create table test
2 (first_name varchar2(50)
3 ,last_name varchar2(50)
4 );
Table created.
SQL>
SQL> insert into test values ('David' , 'Robert' );
1 row created.
SQL> insert into test values ('Martin', 'Fisher' );
1 row created.
SQL> insert into test values ('Henry' , 'Robert King' );
1 row created.
SQL> insert into test values ('Edmund', 'Tomkinson' );
1 row created.
SQL> insert into test values ('Williams', 'Hayes Robert');
1 row created.
SQL> insert into test values ('Tina', 'Belkins');
1 row created.
SQL>
SQL> SELECT * FROM test WHERE LAST_NAME LIKE 'Robert';
FIRST_NAME
LAST_NAME
David
Robert
SQL>
SQL> SELECT * FROM test WHERE LAST_NAME LIKE '%Robert%';
FIRST_NAME
LAST_NAME
David
Robert
Henry
Robert King
Williams
Hayes Robert -
FOR ALL ENTRIES not returning correct number of records
Hi,
I have the following code: -
SELECT vbelv "Delivery
posnv "Delivery Item
rfmng "GR Qty
plmin "Sign
INTO TABLE t_gr
FROM vbfa
FOR ALL ENTRIES IN t_deliveries
WHERE vbelv EQ t_deliveries-vbeln
AND posnv EQ t_deliveries-posnr
AND vbtyp_n EQ c_goods_receipt.
The internal table t_deliveries has a single entry. The table VBFA has 5 records for the delivery/item.
When the SQL is executed it returns 4 records. If I amend the code to use the following it returns the 5 records. Has anybody had a similar issue.
LOOP AT t_deliveries INTO st_deliveries.
SELECT vbelv "Delivery
posnv "Delivery Item
rfmng "GR Qty
plmin "Sign
APPENDING TABLE t_gr
FROM vbfa
WHERE vbelv EQ st_deliveries-vbeln
AND posnv EQ st_deliveries-posnr
AND vbtyp_n EQ c_goods_receipt.
ENDLOOP.FOR ALL Entries can fatch only the unique rows from the table. So, check in the VBFA for the your inputs and the output fields, you will have only 4 unique records. That's why it is picking up only 4 records.
Try to include one more fields which makes every row as a unique row.
Regards,
Naimesh Patel -
ABAP query not returning correct number of records
Hi,
I have created an ABAP Query using logical database VFV and nodes VBRK, VBUK and VBRP.
But, after entering values for Sales Organisation ( VBRK-VKORG ), Distribution channel ( VBRK-VTWEG ) and Date ( VBRK-FKDAT), the number of records that I get are very less in number as compared to the actual number in the database.
Please give some pointers to the reason. I have set Lines 60 and Columns length - 83 and selected ALV List.
Regards,
Garima.Hi Garima,
Please Check whether you are selecting all the Key fields in your Query.
Thanks & Regards,
Ashok kumar. -
Fsbtodb macro in ufs_fs.h does not return correct disk address
I'm using fsbtodb to translate the file inode block address to file system block address.
What I've observed is fsbtodb returns corretct disk address for all the files if file system size < 1 TB.
But, if ufs file system size is greater than 1 TB then for some files, the macro fsbtodb does not return correct value, it returns -ve value
Is this a known issue and is this been resolved in new versions
Thanks in advance,
dhdreturns corretct disk address for all the files if file system size < 1 TB.and
if ufs file system size is greater than 1 TB then for some files, the macro fsbtodb does not return correct value, it returns -ve valueI seem to (very) vaguely recall that you shouldn't be surprised at this example of a functional filesize limitation.
Solaris 9 was first shipped in May 2002 and though it was the first release of that OS to have extended file attributes I do not think the developers had intended the OS to use raw filesystems larger than 1TB natively.
That operating environment is just too old to do exactly as you hope.
Perhaps others can describe this at greater length. -
PDF's in Mail and Preview not displaying correctly
Ever since upgrading to Yosemite PDF's are not displaying correctly. Every time i generate a PDF of a sales quote it seems to lose a lot of information.
But the strange thing is.....
Preview and Mail both show PDF with missing text.
When I open using "Quick Look Attachment" within Mail or Adobe Acrobat it looks perfect.
When emailed, recipients (mostly Windows users) seem to have no problem opening it and seeing all text.
So far seen that issue is only in Preview and Mail
Only has happened since upgrading to Yosemite
PDF is created using web based ZOHO CRM to build quotes.
See image below to see the difference in what Mail and Preview sees compared with how other apps open the same PDF.
NOTE: sensitive info has been purposely blurred on image.Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Yosemite
Safe Mode - About -
HTML mail preview not rendering correctly on EAS mobile clients
I'm having trouble pinning down an issue I'm having with the previews of e-mails that contain HTML on ActiveSync clients specifically iOS Mail clients. Clients are seeing HTML code in the message body previews...
Example 1: "[cid:google][cid:profilephoto] Hello..."
Example 2: "[https://statici.icloud.com/emailimages/v4/common/[email protected]] Dear User..."
When the user opens the message, everything is rendered fine (the previews remain the same though). I don't believe it's anything wrong on the client. The same messages delivered through Gmail on the client are previewed like this:
Example 1: "Hello User. You have successfully reset your password..."
Example 2: "Dear User. The following information for your Apple ID..."
I've tested with exchange servers outside the organization and the previews are rendered correctly (like Gmail). I don't know what version of Exchange the servers were running, but it leads me to believe this is not an outstanding bug between iOS
and Exchange; it's something specific to my server.
The issue is present for all users. I'm running Exchange Server 2007 SP3 and the client I'm experiencing the issue on is iOS 8.1.2.
Thanks!Hi
Outlook 2007 or newer use Microsoft Word for their HTML engine.
You can refer this page http://www.campaignmonitor.com/css/ shows
many things that do not work in different clients.I think Someone needs to re-code
the HTML form to make it work in the current versions of Outlook. You can try formatting with text and HTML and see the results.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
Table not returning correct information
We had a problem where doing a select count(*) returned a number, but then when a select * was issued not rows were returned. Many iterations were tried. Some returning rows and others not. Then when trying to truncate FK errors occurred. Does anyone know what might have been the problem? Our solution was to drop and re-create the tables. This was in a test environment, but we don't want this to happen in production.
Thanks.Something doesn't sound right to me. I haven't seen this happen in our Oracle databases but have seen this happen with a DB2 database
when an index was corrupt. The solution was to rebuild the index in that case. I'd issue a statement to validate the structure of the table
and its indexes:
analyze table table_name validate structure cascade;
From the 8.1.7 SQL manual:
VALIDATE STRUCTURE
Specify VALIDATE STRUCTURE to validate the structure of the analyzed object. The statistics collected by this clause are not used by the Oracle optimizer, as are
statistics collected by the COMPUTE STATISTICS and ESTIMATE STATISTICS clauses.
For a table, Oracle verifies the integrity of each of the table's data blocks and rows.
For a cluster, Oracle automatically validates the structure of the cluster's tables.
For a partitioned table, Oracle also verifies that each row belongs to the correct partition. If a row does not collate correctly, its rowid is inserted into the
INVALID_ROWS table.
For a temporary table, Oracle validates the structure of the table and its indexes during the current session.
For an index, Oracle verifies the integrity of each data block in the index and checks for block corruption. This clause does not confirm that each row in the table
has an index entry or that each index entry points to a row in the table. You can perform these operations by validating the structure of the table with the
CASCADE clause (described below).
Oracle stores statistics about the index in the data dictionary views INDEX_STATS and INDEX_HISTOGRAM.
See Also: Oracle8i Reference for information on these views
Validating the structure of an object prevents SELECT, INSERT, UPDATE, and DELETE statements from concurrently accessing the object. Therefore, do not use this
clause on the tables, clusters, and indexes of your production applications during periods of high database activity.
If Oracle encounters corruption in the structure of the object, an error message is returned to you. In this case, drop and re-create the object.
INTO table
Specify a table into which Oracle lists the rowids of the partitions whose rows do not collate correctly. If you omit schema, Oracle assumes the list is in
your own schema. If you omit this clause altogether, Oracle assumes that the table is named INVALID_ROWS. The SQL script used to create this table
is UTLVALID.SQL.
CASCADE
Specify CASCADE if you want Oracle to validate the structure of the indexes associated with the table or cluster. If you use this clause when validating a
table, Oracle also validates the table's indexes. If you use this clause when validating a cluster, Oracle also validates all the clustered tables' indexes,
including the cluster index.
If you use this clause to validate an enabled (but previously disabled) function-based index, validation errors may result. In this case, you must rebuild the
index. -
Problems with EVGET not Returning Correct Results
We have several reports with EVGETs that are not working. It seems to be limited to gets on a particular datasrc when getting members at the base level. Here is an example.
Application: Budgeting
Deptid: D_07104
Account: A_612080
Product: P_070040
Project: PJ_NOPROJ
Time: 2009.APR
Datasrc; ACTUALS
Category: INPUT
At this point, all the members above are base level members. A standard EVGET will not return results at this intersection even though there is data. If we change any of the following (Deptid, product, time, or category) to a parent level member, data will be returned. Another action we can take to get data to return is open a new worksheet and write the same EVGET on the same intersection and it will return results. If we go back to the original sheet edit each formula and hit enter it will return the correct results. If we refresh the sheet, the results will disappear. We have also tried EVGTS and get similar results.
Another thing we have tried is copying a month of data from datasrc (ACTUALS) and category (INPUT) to datasrc (NEW_ACTUALS) and category (NEW_INPUT) through the BPC delivered copy. That seems to work. I don't know if the copy does something to load the data that we are missing. We also updated our fact table with a SQL update changing the datasrc and category the same way and processed the application and the data would return through some EVGETs and not others.This issue can happen when you have for onde dimension multiple hierachies and something is wrong into hierachies.
Usually you have dimension formula where you are trying to do calculation of a member from H1 using members from H2.
This it is an example but it can be other possible errors.
Any way for sure your issue is related to one dimension having multiple hierachies.
Regards
Sorin Radulescu -
Bizzare error - datasource and getdate not returning correct day of week
Hi,
This is on CFMX 7.0.2,142559.
I have a data source pointing to a MS SQL server. There is a
simple query that access a date off the database and extract the
values of:
-. Current timestamp
-. Day of week
-. First day of week
The query has been running for years and suddenly it gives me
the wrong Day of week and First day of week, but the timestamp is
correct! The result of the calculation for the Day of Week suddenly
became one day ahead, the @@DATEFIRST switched between 6 and 7
(being 7 as the correct value).
Here is the code:
<cfquery name="dte0" datasource="test123"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
@@DATEFIRST dteFirst, @@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
I tried to delete and recreate this data source, restart CF
and flush the cache with no success.
The really bizarre thing is for a few minutes after I restart
CF, it returnes the correct data, but then it suddenly moves one
day ahead - and again, only the Day of week. The DATEFIRST
sometimes returns 6 (instead of the correct value of 7) The
timestamp is ALWAYS correct.
I then created a second data source with exactly the same
parameters and named it "test456" and it works perfectly every
time!!
I am baffled as how this happened and how to fix it.
Does anyone know if somehow the datasource "test123" is
cached somewhere? Appreciate any advice/suggestions/ideas.
Aditya.> The query has been running for years and suddenly it
gives me the wrong Day of
> week and First day of week, but the timestamp is
correct! The result of the
> calculation for the Day of Week and First day of week
suddenly became one day
> ahead.
>
> Here is the code:
>
> <cfquery name="dte0" datasource="test123"
> SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
> @@language LanguageVersion
> </cfquery>
> <cfdump expand="Yes" label="Query Dump"
var="#dte0">
When CF encouters the string within a <cfquery> tag,
all it does is resolve
any CF expressions (there are none in your example), and then
passes the
finalised string to the DB and patiently waits for the DB to
respond, at
which point CF converts the DB-specific result set to a CF
recordset, and
returns it to the calling code. There is very little
involvement on the
part of CF other than that: the DB does most of the work, and
is providing
all the data.
All that said, it does seem weird that one DSN returns one
thing, and
another returns something else. Is your test rig like this:
<cfquery name="dte0" datasource="test123"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
@@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
<cfquery name="dte0" datasource="test456"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
@@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
IE: both queries to each DSN within the same CF template,
executed at the
same time.
(note: you have a syntax error in your <cfdump>
statement, so that actually
*isn't* the code you're running, because it would error).
If you run the query via some other client (like Query
Analyser, or SQL
Studio), what do you get? Does it differ from what CF
presents?
Adam -
ADDT not returning correct results
Hello
SELECT tblTraders.trader_company AS trader_ref, tblTrades.trade_name AS trade_ref, tblT2t.t2t_id
FROM (tblT2t LEFT JOIN tblTraders ON tblT2t.trader_ref = tblTraders.trader_id) LEFT JOIN tblTrades ON tblT2t.trade_ref = tblTrades.trade_id
WHERE {$NXTFilter_rstblT2t1}
ORDER BY {$NXTSort_rstblT2t1}
With reference to the above SQL statement generated while using dynamic list wizard, the SQL does not return the correct results.
Sadly the SQL does not retrieve the field "trade_ref" and is blank when the "test" button is used.
Anyone got any ideas?
Cheers
PaulHi Paul,
does this query return the correct results when loading the page in a browser ?
Cheers,
Günter -
Res.getPathTranslated() does not return correct URL of the page requested
Hi,
The res.getPathTranslated() statement in the below code (in doFilter method) does not return the correct URL of the requested webpage.
Whenever a web page is accessed using a return statement (eg : return "nextPage"; ) inside a button's action method or a hyperlink's action method, the res.getPathTranslated() returns the URL of the current webpage instead of returning the URL of the webpage that is actually requested.
For example if there is a button on the page http://localhost:29080/MyJaas/faces/firstPage.jsp
And the button_action() is as follows
button_action()
return "nextPage";
The res.getPageTranslaged() returns "http://localhost:29080/MyJaas/faces/firstPage.jsp" instead of "http://localhost:29080/MyJaas/faces/nextPage.jsp"
However, if the webpage is requested by populating the URL property of the hyerlink in creator IDE, the res.getPathTranslated() returns the correct (requested) web page.
How to make res.getPathTranslagted() return the correct URL when the webpage is accessed from hyperlink's / button's action method?
I know that the explation is not very clear, so please bear with me. Let me know if you need more clarificatons. Thanks in advance for showing interest in this issue.
And by the way, the code below is the same as that used in Jaas Authentication tutorial :- http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/2/jaas_authentication.html
package jaasauthentication;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.http.HttpSession;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class SecurityFilter implements Filter{
/** Creates a new instance of SecurityFilter */
private final static String FILTER_APPLIED = "_security_filter_applied";
public SecurityFilter() {
public void init(FilterConfig filterConfig) {
public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws java.io.IOException, ServletException{
HttpServletRequest req = (HttpServletRequest)request;
HttpServletResponse res = (HttpServletResponse)response;
HttpSession session = req.getSession();
String requestedPage = req.getPathTranslated();
String user=null;
//We dont want to filter certain pages which include the Login.jsp/Register.jsp/Help.jsp
if(request.getAttribute(FILTER_APPLIED) == null) {
//check if the page requested is the login page or register page
if((!requestedPage.endsWith("Login.jsp")) && (!requestedPage.endsWith("Register.jsp")) && (!requestedPage.endsWith("Help.jsp"))){
//Requested page is not login.jsp or register.jsp therefore check for user logged in..
//set the FILTER_APPLIED attribute to true
request.setAttribute(FILTER_APPLIED, Boolean.TRUE);
//Check that the session bean is not null and get the session bean property username.
if(((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1"))!=null) {
user = ((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1")).getUsername();
if((user==null)||(user.equals(""))) {
res.sendRedirect("Login.jsp");
return;
//deliver request to next filter
chain.doFilter(request, response);
public void destroy(){
}Guys any solution for the above problem?
Right answer fetches 10 duke dollars.. -
MessageChoice does not return correct value
Hi
I am problem with MessgeChoiceBean's improver beharior
For the first time it retunrs blank and subsequently In one page if I select Yes, it returns No.
In another page it does not return any thing for the first two selections. And I reciev flip values.
I ran VO outside, VO is returning correct values.
MessageChoice attributes and associated PPR:
Data Type: Varchar2
Initial Value: N
Pick List view Definition: oracle.apps.xxx.docs.common.lov.server.YesNoVO
Pick List View Instance: YesNoVO3
Pick List Display Attribute: Meaning
Pick List Value AttributeL LookupCode
ActionType: firePartialAction
Event: handleNewLocationFlagChange
Parameter Name: newLocationFlag
Parameter Value: ${oa.CustomerInfoVO1.NewShipToLocationFlag}
ProcessParameterForm Code:
if ("handleNewLocationFlagChange".equals(event))
String newLocationFlag = pageContext.getParameter("newLocationFlag");
Serializable[] parameters = { ""+newLocationFlag};
Class[] paramTypes = { String.class};
am.invokeMethod("handleNewLocationFlagChange", parameters, paramTypes);
VO definition:
select LOOKUP_CODE,MEANING
FROM ONLINE_DOCS_LOOKUPS
WHERE ONLINE_DOCUMENT_CODE = 'ALL'
AND LOOKUP_TYPE = 'YESNO'
ORDER BY ATTRIBUTE1
View output:
LOOKUP_CODE MEANING
N No
Y Yes
I have quite a bit number of columns to change render property.
Any help will be appreciated.
Thanks
PrasadYour question is not clear, are you saying the values in the messageChoiceBean is not displayed properly. As far as I can see from the definition the poplist picks the values from a lookup(Yes, No) values and has a PPR action associated with it. Did you check what this method handleNewLocationFlagChange is doing in the AM ?
-
Iphoto preview not showing corrections with Yosemite
I created a new iPhoto file for 2015 and when I make adjustments to some of the photos with an outside editor (PhotoShop), the preview image does not show the corrections after making the changes. This has always worked before.
If I click to open the preview image after changes were made, the image shows with the corrections made but the menu under photos does not have the "revert to original" active and is grayed out, even though there have been changes. Yet, if I check the package contents of the 2015 iPhoto file to check the contents for the new pictures, the changed photos are shown under previews and the originals are shown in masters.
Since I got the iPhone, I had not used my digital camera since a June 2014 vacation. The preview corrections will always show if it is an iPhone picture but will not show the corrections if it is from my digital camera. If I export the camera photos with Image Capture to another folder not associated with iPhoto, then import the the pictures into iPhoto using the Import function, corrections will be saved and the preview will change to show the corrections (as previously). The picture also shows the revert to original option as available.
I had not used the camera since I upgraded to Yosemite so I went back to experiment in Mavericks which is on another drive and imported a test picture from the camera into iPhoto, made extreme changes to make it easier to see in the preview, and saved. The preview showed the corrections and iPhoto behaved as expected. I imported the same picture into Yosemite from the camera into iPhoto, made new radical changes and the preview did not change, no revert available, or the changes saved. Import in both instances was using the same picture on the same SDHC card in an external card reader.
These experiments seem to show that the problem is not my pictures or the card, but it a problem with iPhoto importing digital camera pictures under Yosemite. Since the iPhone imports directly and not through a reader, can it be that iPhoto under Yosemite has a problem communicating with the reader that does still work under Mavericks?
I know how to avoid the problem by this two step importing, although it will not break the photos into the auto-split of the events to individual days as would be if directly imported, but as one cluster of multiple day photos - a problem since I sort by date under View. The splitting by days is important for me. I do not want to sort trip pictures into individual days before importing as I might have as many as 1,000 photos in a single trip!
Is there a solution?Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Screenshots are from PSE 10
Note 1: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
Note 2: editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.
Maybe you are looking for
-
Jabber for iPhone cannot call over Expressway. Expressway says: Bad Extension
Hi, I've had Expressway working but now calls from/to Jabber for iPhone fail with a message "Bad Extension" in Expressway-E. Is there someone that is willing to share the search rules of Expressway-E required that are required for Jabber to make/rece
-
Unlocked Iphone 4s doesn't work in my country
Hi I bought an "unlocked 4s" from this seller on e-bay. He has a lot of reputation and good feedback and seems genunine. http://www.ebay.co.uk/itm/350980444162 Now we live in little country called Andorra next to Spain and France. I put my local sim
-
Electronic book and Macbook air
I just book an electronic book on iTunes thinking I would be able to open it in my Macbook air. Apparently the app that opens this type of files is only for iPhone/IPad. Is there any app apart from ibooks that I can use? I don't have an IPad. Thanks
-
Restore data from iCloud without resetting?
Let me get this straight. If I want to restore data from iCloud, then I will need to reset everything before I can do that? I have some photos that I need to restore, I can not do this in mac (asking for aperture or iphoto, which I refuse to buy, as
-
We are migrating an exsiting application from WLS 6.1 to WLS 7.0 SP1. Performance degraded significantly with only this change. Is there anything obvious or identified as to why when all other things remain constant that this Upgrade would cause such