+filter +ID +CAN +XNET

In the XNET Bus Monitor there is an option to "Filter-ID's". How is it working in the code? Is there any setting for the session to get only specific frames, or the bus monitor gets all the frames and ignores those which are not in the list?
A second question, is the source code for the XNET Bus Monitor available?
Madottati

Thank you guys for your replies.
The problem is with the frame input single point session, that reading the frames at any time can return no payload - it depends on when you call the Read VI. I made a workaround with a frame input stream session using :subordinate: and I filter my IDs programmatically.
Madottati

Similar Messages

Which filter i can use to identify text CYM at work 100% black ?

Which filter i can use to identify text CYM at work 100% black ?
That's may problem:
I have one work 100% black (book), end fill texts may include CYM, how to identify them using a filter (Shift+ctrl+x)
Thak's

I'd use the settings you'll use to convert the data (or Absolute). If you do any conversions in Photoshop, make sure Dither is off.

The HOLE filter. Can I place an image behind the hole created in another image?

The HOLE filter. Can I place an image behind the hole created in another image?

Here's an example of the hole filter composited against a background image. This filter will run in the Pixel Bender Toolkit.
<languageVersion : 1.0;>
kernel HoleCompositedAgainstBackground
<
namespace: "pb::forums";
     vendor: "spotted chicken";
    version: 1;
description: "Hole filter composited against a background image. The original 'Hole' filter was written by Jerrynet. See the Pixel Bender Exchange, <http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1550519#> for more information.";
>
//< namespace : "net.Jerry.PixelBender";
// vendor : "[email protected]";
// version : 4;
// description : "A Hole Distortion Effect.";
//>
parameter float radius
<
     minValue:    float(0.0);
     maxValue: float(1000.0);
defaultValue: float(100.0);
aeDisplayName: "Radius";
>;
parameter float2 center
<
     minValue:   float2(-800,-800.0);
     maxValue: float2(1600.0,1600.0);
defaultValue:   float2(120.0,120.0);
aeDisplayName: "Center";
>;
parameter float EdgeSmooth
<
     minValue: float(0.0);
     maxValue: float(3.0);
defaultValue: float(1.0);
aeDisplayName: "Edge smoothing";
>;
input image4 src;
input image4 background;
output pixel4 dst;
void
evaluatePixel()
float2 Pos_from_cen = outCoord() - center;
float p_length = length(Pos_from_cen);
float fun = (radius*radius)/abs(p_length);
float m = fun/sqrt(Pos_from_cen[0]*Pos_from_cen[0] + Pos_from_cen[1]*Pos_from_cen[1]);
float2 pp = -float2(m*Pos_from_cen[0], m*Pos_from_cen[1]) + outCoord();
pixel4 final = sampleLinear(src,pp);
if (p_length <= (radius+EdgeSmooth/2.0))
//smooth the circle edge
if (p_length >= (radius-EdgeSmooth/2.0))
final *= (p_length-radius+EdgeSmooth/2.0)/EdgeSmooth;
else
final = sampleNearest(background, center + Pos_from_cen);
dst = final;

I've downloaded the free pixel bender plugin for my mac (it says toolkit) for cs5 but I don't know how to put it in my filter list, can someone walk me thru it please?

I've downloaded the free pixel bender plugin for my mac (it says toolkit) for cs5 but I don't know how to put it in my filter list, can someone walk me thru it please?

Copy it in the respective plug-in folder.
Mylenium

Do you know if Assessment Filter fields can be use for reports?

Do you know if Assessment Filter fields can be use for reports?
I have an Assessment filter field in contacts that it use to capture relavant information for the contact. Because I thought we could use it as another picklist. But when I am creating a report I can find it in the list of fields available for the report.
Thank you very much
Catalina Valadez
Regards

Hi thank you for the answer but a have another point.
I am not using asssessment as an object, I am just using the field "assessment filter 3" that is one's of the default field for contacts that you have for customize the application. So I thought it will be show in the list of fields for the reports (Going to Reports -> Design Analysis -> under reporting choosing "Contacts") and I can't see this field, when I'm looking in "Contact Fields".
Regards
Catalina Valadez

Performance Point Cascading filter challange - Can it be done? If not, we need to change our BI front end!!

My challenge at the moment is that I need to create a dynamic filter. To explain this is a cascading filter but not your normal cascading filter,
ie, Year/Month/day etc.
Here we have a single Dimension, Organisation. It contains every level of a business,
Site,
Dept,
Company name,
Division
Holding
Strategic Area
From these as a default we have 4 built hierarchies with a different combination of the above.
Activity (Strategic Area, Dept)
Organisation (company Name, site, Dept)
Sites (Division, Site)
Holdings(Holding, Strategic Area, site, Dept)
At any given time we have have additional Hierarchies created within the Dimension, further adding to the hierarchy list.
We now have a challenge where we require our users to be able to in the first filter select the Hierarchy they want to use, ie, Holdings, Site, Organisation
or Activity. This should then cascade to the second filter and contain the relevant hierarchy and levels as a multi select filter. Of course this also needs to be connected to number of graphs, charts and scorecards on the page, dynamically.
I have gone around the houses to get this to work but not having any luck. Tried the variety of filters available, MDX, member selection, tabular,
SharePoint, and attempted to mix and match to get this to work. I cannot find a way but I don't believe this is not possible.
If it is not possible we must look around for another front end solution for our BI Dashboards which I would prefer to avoid. Any response or suggestion
would be much appreciated.
Regards,
Sheb

This is possible within PerformancePoint 2010. Filters can be cascading. There is one restriction that might affect you, and that is the cascade only works on the preceding level. For example, let's say you have 4 filters, Country, County, City, postcode,
that have been set up in PerformancePoint as cascading filters. Now when you choose a country, say United Kingdom, only Counties within the UK will be displayed. That's exactly as you could expect. However, now if you select Norfolk county, all the cities
with "Norfolk" county will be available. That's including the cities within "Norfolk" Massachusetts. This is because PerformancePoint cascading filters only work between two levels.
Here's a link to setting up cascading filters http://technet.microsoft.com/en-us/library/hh272541(v=office.15).aspx
Hope that information is useful to you and the cascade limitation doesn't limit you too much.
Richard

Convert binary data to decimal in CAN XNET

I am using NI-XNET Read function to read CAN frames from port CAN1 , the data out put comes in cluster in binary format is there any function that I can use to convert the binary to decimal ? I prefer not to write another sub-vi to do conversion but using the existing functions that can use my .dbc file and parse all frames in decimal format.
Thanks.

Yes Doug You are correct. We have a PCB and we have connected two inductive sensors over the PCB which are measuring the distance and transpose it to voltage. The PCB has a software which transpose this voltage through an ADC and through the Can Bus we are reading the sensors .To communicate with the PCB we are using a USB to Can device from IXXAT to communicate, we have build the Labview drivers and our problem as you mention is that we want to transpose this data to voltage. How we can do this? I try several times to upload photos or even the program we have create but for some reason the site is not letting me to do that. If you have an email i can send you the program we have create to tell us your opinion in this problem we have, we can also send you the Labview drivers and the datasheet of the sensor we are using.
Attachments:
Read from Can.vi ‏37 KB

How can I filter J1939 CAN messages by Command Byte. (NI-CAN)

We have customers who use the first byte of data as an additional header byte. They have the usual J1939 extended header along with the first byte. Does anyone know of a way to filter on this in "Measurement & Automation Manager" (NI-CAN). We then bring this data into our VB6 application using the NI-CAN API. But I always need to write extra software to filter on the Command Byte (first byte of data).

You have to have at least LabVIEW 6.1 to use the NI-CAN 2.2 driver. So you might be OK running it on a Win95 machine.
I didn't find anything saying that it won't work on Wi95, it may not be supported, which just means that if you run into problems, NI support probably will not help you. On the download page for the driver, it says it supports Windows 2000; Windows 98; Windows ME; Windows NT and Windows XP. They may have indeed dropped support for Win95. LabVIEW 7.1 will not even install on a Win98 or 95 machine, so they may have done the same for the new CAN driver. Only way to know for sure is to try it.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Servlet filter that can differentiate between Filter and Servlet Writers

Hey,
I'm trying to build a Filter and HttpServletResponseWrapper that, when applied to a generic servlet, can differentiate between the output stream from the Servlet and the one from the Filters.
So, say I have a servlet:
PrintWriter pw = response.Writer();
pw.write( "Output from servlet" );
pw.close();And a filter that is applied to the servlet:
PrintWriter pw = response.Writer();
pw.write( "Output from filter" );
pw.close();I want to be able to do this in my filter that is able to differentiate between the servlet and filter response:
System.out.println( "Response from servlet: " + responseWrapper.servlet.toString() );
System.out.println( "Response from filter: " + responseWrapper.filter.toString() );The responseWrapper.servlet and responseWrapper.filter can contain all filter responses from all the servlet(s) and filter(s), respectively.
Can anyone give me guidance as to how to start with this - really I just need to know if I can differentiate between servlet and filter responses in a generic way (without having to modify the response specially in the filter or servlet files that write output)
Thanks for your time.

first thing's first..if the OutputStream if not closed Either a Filter or a ServletChain can write on to the stream.
There could be cases where the servletoutputstream would be closed at servlet end itself.Therefore,its a valiant effort by acomplishing a responseheader in the response to indicate that.
Now once the response/outputstream is not closed or flushed out there is not direct way by which you do this unless we indicate using response Headers as flags when we are implementing FilterChaning.
Hope that might help :)
REGARDS,
RaHuL

Use FI Posting date as a filter value, can I get YTD for current year?

Dear Expert,
I work on a BI report which calculate the YTD key figure (restricted by 0CYEAR and =< 0CMONTH).
One of the requirement for the report is to allow user to enter a value for a date using FI Posting date (although this is optional).
Without entering the value for FI Posting date, my report works fine.
But once FI Posting date is entered, no data found.
I expect that when the value for the FI Posting date is entered, the YTD value will be calcuated starting from the Jan 1 of that FI Posting year to the FI Posting date entered.
But this seems not happen.
Could you help me to resolve this problem?
If there is a better solution, please let me know.
Very appreciated.
Arthur

Hi Dipika,
Thanks for your reply.
In my report, FI Posting date is a free characteristic, which user can optionally select it and fiter it for a specific FI Posting Date. Do you consider it as a global filter?
my query structure is as below:
rows: profit center, department, manager
columns: YTD for current year, YTD for Previous year, the difference betwwen the two
The requirement is when user enter a FI Posting date, use it to restrict the KF shown above.
For example, if the FI posting date is March 15, 2008, then YTD for current year should be restricted by the period between Jan 1, 2008 and March 15, 2008 and YTD for previous year should be restricted by Jan 1, 2007 and March 15, 2007.
Do you have any idea how to implement this requirement in term of FI Posting date?
Thanks and appreciated.
Arthur

Filter which can change wavelength automatically

I have ahead of me certain task regarding filter. Now my filter has semi auto(user can input desired wavelength) wavelength selection.The range of the filter is 550nm to 720nm. My tasks are:
1) the filter should automatically select (for eg: 600nm, 645nm,686.7nm and 718nm) one after other and remain in that level for a specified time(.5s,1s etc)
2)The camera attached should take image at each of these wavelengths and store the image(without giving capture command)
Can I use stack structure for the first task.
Solved!
Go to Solution.

Hey
I have 8.6 version of labVIEW.
So i guess i cannot save in a version previous than 8.0
however i am attaching a pic of the modified code. Do the modifications accordingly and also i am attaching a 8.0 version of the same. Ask some one who can save it in 7.1 for you
Somil Gautam
Think Weird
Attachments:
vi.JPG ‏95 KB
filtersweep-1-3.vi ‏10 KB

Is there a filter I can add so that my kids don't stumble into inappropriate websites?

Hello,
I have two boys who love the game Minecraft. I have recently heard about children who stumble inadvertently into totally inappropriate web sites. Are there filters I can add so that this can't happen? I do supervise them when they are online, but I don't stand over them the whole time they are playing the game.

runningafterboys wrote:
Hello,
I have two boys who love the game Minecraft. I have recently heard about children who stumble inadvertently into totally inappropriate web sites. Are there filters I can add so that this can't happen? I do supervise them when they are online, but I don't stand over them the whole time they are playing the game.
Make them a seperate User account (System Preferences > Users and Groups)and only let them log in this account and then set Parental Controls to your level of security required for the new account.
Good Luck
Pete

Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

Problem was first noticed because I can't burn CDs in iTunes.
The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway ESSEX2
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX 440 (Gateway)
NVIDIA GeForce FX 5200 (Gateway)
Connected Device Information:
DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Gateway Essex2 Windows XP

Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

Can you take a photo on an iPad 2 with a filter or do you have to add one after?

Can you take a photo with a filter or can you only add it after?

I guess you could tape a filter over the camera lens.
 Cheers, Tom

Can I filter emails in icloud by selecting a sentence in the email body

I have received thousands of unwanted emails from a myriad of addresses, in a similar format, but each of which has a different randomly generated set of letters and numbers in the subject - so there is no point in selecting the email addresses or subject for the filter. Can I create a filter which selects a specific sentence in the body of an email, and sent it to the trash folder?

You can do that in Mail on your Mac but not at the iCloud.com Mail site.
OT

+filter +ID +CAN +XNET

Similar Messages

Maybe you are looking for