Filter not working for all objects

I have 17 objects in one group with an applied "Repel" behaviour. All of the objects are affected except one, why is this?

Move the object that doesn't move slightly off of "dead center" (0,0,0).

Similar Messages

Shared Libray UDF does not work for all objects

I have created a shared UDF Library and am successfully using the code in other mappings.
however when i am trying to apply the code to two new mappings, the code does not work! there is nothing special about the code. just get the MessageID.
public String GetMessageID(Container container) throws StreamTransformationException{
//This UDF gets the PI message ID
String constant;
java.util.Map map;
map = container.getTransformationParameters();
constant = (String) map.get(StreamTransformationConstants.MESSAGE_ID);
return constant;
it works when i enter the messageID in graphical mapping, but when i test end to end, it does not work!
and as i mentioned, it works in two other interfaces... but not in the new one!
any thoughts?

after applying the latest patches it seems to have corrected iteslf

Triger extract is not working for USERDETAILS object.

Dear MI experts,
I am doing custom client integration. In that we have faced a problem.
Trigger extract is not working for USERDETAILS object in SWCV SAP BASIS 7.10.
1. I have assign the SWCV SAP BASIS 7.10, user define SWCV to device.
2. I have checked the SMQR all queues(extract queues) are in register mode.
But if I delete the users and reassign the same user, then it is sending deletes and insert to the outbound queue.
please help to resolve the issue.
Regards
lakshman balangu

Dear ananth,
Thanks for ur replay.
Actually as soon as the device is registered, automatically the USERDETAILS and USER_AUTHORIZATION Objects should
go to the Outbound queue from the pending extract
I have tried what you have suggested.
1.I have taken device which is in initial state and I have assigned the 'user' and 'user define SWCV'.
2.I have register the devices with my custom client. After that also SWCV SAP BASICS 7.10 not become operational and automatic extract not happend for USERDETAILS.
my doubt is, any thing i need to send from client to make SWCV SAP BASICS 7.10 operational?
(or) is it problem with system?
Regards
lakshman balanagu

Key focus is not visible for all objects when tabbing

I'm using LabView 5.1.
The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
Is this a bug with LabView or am I doing something wrong ?

Hi Ben,
Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
Thanks for your time !
BigBen
Attachments:
3buttons.vi ‏22 KB

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

Query level formula is not working for all the amounts

Hi Friends,
In my production system I found new thing that in my query level I done some calculation (as per my requirement I done amount devide by 100 to get correct values)
It is working for all the amounts except 1or 2 amounts, im uploading same source file for all the amountsu2026 why it is happening like this u2026and is there any availability to change those 1 or 2 values at data base tables level or at any pleace (I hope in SAP it is may not possible)u2026can any body tell me why it is happening like this. u2026 because of this issue only my report is pending to sign off u2026.please can any body find the solution ASAP.
Regards,
VENKAT

Are they non decimal currencies?
If yes, create RKF1 on amount field excluding the currencies for which you are not getting currect values then in CKF or formula as RKF1 / 100. Similarrly create another RKF2 on amount only including the currencies which are excluded in RKF1, create a CKF or formula as RKF2/10000. Then created another formula wich adding CKF1 and CKF2.

F1 help not working for J2EE objects

Hi,
I love the F1 help that takes you to the JavaDoc. However, it doesn't seem to
work for J2EE objects (only J2SE). However, workshop does know about J2EE objects
because the function completion stuff works.
The "J2EE Javadoc location" in IDE Properties is set to http://java.sun.com/j2ee/1.4/docs/api/.
I also changed it to my local install of the Javadoc. Still no satisfaction.
Anyway to get this working?
Thanks,
Phil

Raj,
Thanks for the service pack clarification.
Any ideas why the F1 for J2EE is not working?
Is anyone else having this problem?
It seems to be using the J2SE javadoc location instead.
Thanks,
Phil
"Raj Alagumalai" <[email protected]> wrote:
Phil,
The installation you have is WebLogic Platform 8.1 GA, which contains
WebLogic Server 8.1 sp1, which is why the next service pack will be called
Service Pack 2.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Phil Grimm" <[email protected]> wrote in message
news:[email protected]...
Is there an SP1 for Workshop? The build I have (in Help | About) showsBUILD: 2003.0710.190003).
Is there a newer build? I have not been able to locate a download.
One file you can try is LoginBacking.java in{sampleportal}/WEB-INF/src/examples/login.
Postion on "HttpServletRequest" and hit F1 goes to the J2SE javadocand
displays
java.lang.Object. It's not going after the correct javadoc file.
Phil
"Raj Alagumalai" <[email protected]> wrote:
Phil,
I have tested JE22 objects and have not had any issues. Can you attach
a
file where F1 help fails ?
Regarding F1 help for weblogic API's they will be available in Service
Pack
2.
Hope this helps.
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Phil Grimm" <[email protected]> wrote in message
news:[email protected]...
Oh, it would be nice if F1 would work for BEA APIs. Is this possible?
Even more cool would be if we could configure it to point to API'sof our
own
or others like Struts, etc.
If this is not possible, please consider this an enhancement request:)
Phil
"Phil Grimm" <[email protected]> wrote:
Hi,
I love the F1 help that takes you to the JavaDoc. However, it doesn't
seem to
work for J2EE objects (only J2SE). However, workshop does know
about
J2EE objects
because the function completion stuff works.
The "J2EE Javadoc location" in IDE Properties is set to
http://java.sun.com/j2ee/1.4/docs/api/.
I also changed it to my local install of the Javadoc. Still nosatisfaction.
Anyway to get this working?
Thanks,
Phil

OC4J JSP Debugging not working for all the jsps

Hi,
Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
1) global-web-application.xml is modified
Changed the attribute development="true" in orion-web-app
Added the below init param for the JspServlet
<init-param>
<param-name>debug</param-name>
<param-value>class</param-value>
</init-param>
If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
Project Structure:
Test (Eclipse Dynamic Web Project)
-WebContent
Sample.jsp ( Breakpoints are working)
-subF (Folder)
SubSample.jsp (Breakpoints are not working)
-WEB-INF
web.xml
Debugging worked for http://localhost:8888/Test/Sample.jsp
Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
Any help is highly appreciated.
Regards
Danny

This tells there is not enough main memory (not disk space) for the program to run.
- You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
- Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

SelectManyListBox is not working for Integer Objects in Jsf

hi,
In JSF selectManyListBox is not working with Integer objects it is working only with String Objects. It is showing the error "value is invalid" can anybody please send me sample code snippet regarding this.

The javadoc of UISelectMany.validateValue() says:
In addition to the standard validation behavior inherited from UIInput, ensure
that any specified values are equal to one of the available options.
So, you should take care that the submitted values are equal to one of the
options. Note that an Integer is never equal to a String.
Show your codes to us.

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

Filter not working for session timeout

Hi all,
I am working on a struts application in portal. I want to logout of the application when a user does not perform any action, for say 30 mins. For this, i am using a filter and defined the filter as follows in web.xml.
<filter>
<filter-name>PageFilter</filter-name>
<filter-class>SessionFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>PageFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
Also i gave the timeout in web.xml as follows.
<session-config>
<session-timeout>30</session-timeout>
</session-config>
And i had the filter servlet as follows.
public class SessionTimeoutFilter implements Filter
public SessionFilter()
public void init(FilterConfig conf) throws ServletException {
public void destroy()
// Create a new instance of SessionFilter
private static int firstRequest = 0;
public void doFilter(ServletRequest request,ServletResponse response,FilterChain chain)
throws IOException,ServletException
HttpServletRequest hreq = (HttpServletRequest)request;
HttpServletResponse hres = (HttpServletResponse)response;
HttpSession session = hreq.getSession();
try{
if (session.isNew()) {
if(firstRequest == 0){
firstRequest++;
else {
hres.sendRedirect("http://www.google.com");
firstRequest = 0;
return;
}catch(Exception e){
e.printStackTrace();
chain.doFilter(request,response);
When trying to execute this one i am getting a portlet 500 internal error. I am not sure where i went wrong. Can anyone give me a suggestion for this to work in a portal.?
Thx in advance....

Hi,
Thx for ur reply, Here i am using firstRequest as a counter variable. when the session is new and firstRequest is 1, it means that the session has expired and new session started and this is where i am redirecting to another page. The problem is, i think is mainly because of the sendRedirect i am using there in the code. I think sendRedirect will not work in portal, because when i test this application locally , it is working fine. But when i deploy it in portal, i am getting the error. Can you suggest me an alternative for sendredirect in portal.Even i tried with forward but no use.
Thx....

ECR/ECO Workflow not working for multiple Objects

Hello all,
We have implemented ECR/ECO workflow by customizing the SAP standard one. We are facing a problem when entering multiple ECO objects such as mutiple Documents, materials, BOMs etc. When we create the ECR, two parralel workflow start (one for ECM and other for ECO) and depending on how many ECO objects we have included, multiple instances of ECO workflows will trigger (I think this is the standard behaviour as well but not sure)
In our workflow, we have a wait step in ECO workflow that waits until ECM has been converted into ECO (ECOP status) and starts the ECO workflow. Also, we have created a Wait step in ECM workflow and that waits until the ECO workflows have reached the CONFIRMATED Step when the processing of the objects are finished.
When we enter one object, both workflows start and ECO waits until ECM has been converted into ECO and then start the processing the Objects. when the ECO workflow is done (Status confirmated), it switches back to ECM workflow and then goes on with Close/Release steps of the Objects/ECO etc.
But, when we have multiple ECO objects, both start well as ECR converts to ECO and the ECO starts and then work items are processed but then stops just before the CONRIMATED steps even though all objects are changed/maintained properly and ECO workflows are completed. As a result, the control doesn't refer back to ECM and we never get the ECO close and Release step work items.
I have checked SWETYPV, SWEL, business objects ECM and ECO but nothing gives a result..
Any help would be appreciated..
Thanks

Can you please update on what is the status in the workflow log. You can check this from SWIA tcode.
If it is in process step please check for ST22 dump if any.
Thanks
Arghadip

Exe created with Report Generation toolkit does not work for all users

I created a exicutable with the report generation toolkit and it only works with some of my users. I use microsoft 2007 and anyone that has microsoft 2007 my exe works well. Most of my users that have microsoft 2010 are able to use my program as well. However, there is one user with 2010 and Windows 2007 that cant get my program to work.
Any suggestions for troubleshooting this?
Thanks

The most likely issue is due to the fact that Microsoft changes the ActiveX object model of Office for each version of Office. The Report Generation Toolkit does a pretty good job of handling this, but it is not 100% effective. Search, for example on the "Set Cell Border" function and you will see what I mean. In these cases it's up to you to handle this issue. How you handle it really depends on your situation. For us to provide a more concrete answer you will need to provide further details, such as what toolkit function is "not working" (whatever that means), and who you "users" are. Is this an internal distribution? Are you selling this program? Is this code written for a project with a specific customer?

Center alignment not working for all groups

We are trying to center our visual within our blank white canvas, and we have multiple groups within the file. See image attached. When we select all groups then hit the center alignment button, only the bottom group becomes centered and nothing else. When we try to select all layers within the first group and hit it, everything moves except the color mask which stays in the original place.
This seems to be a glitch or bug that it's not working automatically for everything.
~Katie

Ask in the PS forum and provide exact system and version info.
Mylenium

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

Filter not working for all objects

Similar Messages

Maybe you are looking for