Filter or Window function from the analysis Library

Friends,
I will be collecting about 20,000 data points. I would like to reduce the number of points to plot to about 300 to 500 points. (i call this filtering)   I know there is an Advanced Analysis Library function that would do this; which one would be the best?
Dave

Hi,
one possibility without even using the Advanced Analysis Library is to use the 'point frequency' parameter in PlotXY:
PlotXY ( plot_handle, graph_control, x_array, y_array, 20000, VAL_DOUBLE, VAL_DOUBLE, VAL_THIN_LINE, VAL_EMPTY_SQUARE, VAL_SOLID, 40, VAL_RED); this would plot every 40th point out of your 20000 data points.

Similar Messages

All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?

All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?

Hi
I haven't even touched anything that I know of?
And You've not moved or emptied any folder on Your Hard Disk named
• iMovie Event's - or -
• iMovie Project's
Or - disconnected any external hard disk/s
As one CAN NOT move the Event's or Project's on / via DeskTop/Finder - AS iMovie then loses the connection to them. Moving them - MUST BE DONE - within iMovie application - to work OK.
So if You by meaning or accident moved it/them - Move them back - and iMovie might work again.
ELSE - If You are 100% sure that You didn't move them then
• Trash iMovie Pref and Cache files
• Run Repair Permissions - Disk Util tool
• Run Repair Hard Disk - Disk Util tool - BUT YOU MUST Start-Up Your Mac from DVD or External HD to do this
and may be all will work OK again
Yours Bengt W

Error -5093 "The analysis library was not found" in 64 bit project. But the analysis library is found in 32 bit project

Hello,
I'm using the Labwindows/CVI 2010 Full Development system, in a Windows 7 professional 64 bits computer. So, The analysis library is installed (see in the attached file), and the Option Analysis from the Customize library menu is selected.
I'm using several function from analysis library (WhiteNoise, MaxMin1D, LinFit, etc). The projects in 32 bits work very well. In 64 bits project there is not linkage error, the exe is created, but there are errors like that:
Function WhiteNoise: (return value == -5093 [0xffffffffffffec1b]). The analysis library DLL was not found or could not be loaded.
the same for the other analysis library functions.
how to do to use the analysis library in 64 bit projects, it's the analysis library 64 bit compatible?
thanks in advance
Solved!
Go to Solution.
Attachments:
AnalysisLibraryInstalled.jpg ‏220 KB

Hi DansatB,
thanks you for posting on this forum !!
Yes, the advanced analysis librairy is 64 bits compatible. i can do the test on my computer on CVI 2013.
i think it will be great to correctly uninstall your CVI version ans all install again.
Regards
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...

DIAdem: How to store the input channel information from the Analysis modules

Hi,
I would like to know if there is a way to store the input channel name(s) when executing modules from the Analysis Panel. For example, when I run an FFT on a set of data: x-channel: "[1]/Time" y-channel: "[1]/Voltage" , I would like to be able to store this information as a custom channel property in the output file (ex. "[1]/AutoSpectrum").
The only place I've found that contains this "history" information is in the log section of the Analyze Panel. However, I have not been able to figure out how to access the information in the Analysis log programatically through VBS scripting.
Thanks

Hi Brad,
So here's where I'm struggling. My tool is more a set of tools. I have created custom bars that launch the appropriate dialog box for each tool. Let me give you and example of the kind of work flow I that might be used:
The user loads up a TDM file or imports data using a DataPlugin. Then, they launch my tool for going through each channel and adding custom properties (sensor type, sensor location, etc). Once all properties have been applied to the channels they close that tool. Now they fire up the Smoothing module in ANALYSIS and save the result as a new channel. Next, they launch my tool for computing the Shock Response for that event. When the user has the desired output, they run my plotting SUD. This is where they can select which report template to use and which channels to plot. The selected channel(s) used for plotting doesn't have all of the custom properties that we taged in the original data channels.
As you can see, the process involves using some of my own custom SUDs where I can keep track of everything but also allows the user to use any of DIAdem's native functions. This is where I am struggling to be able to keep track of the channels used as input. I can "see" the info I need listed in the log section of the ANALYSIS Panel but can't pragmatically access it (the info in the main display window). It would be really handy if this info was automatically stored in the channel properties of each output channel.
I guess my only option is to (in the plotting SUD) not only ask the user for the channels to plot, but also ask them to select the coresponding original channels that have the custom properties.
James

Sync and stream from the same library?

Hello,
Prior to upgrading to ATV2, I was able to access 'unchecked' items in my iTunes library from my ATV. This is the iTunes library that I am also syncing from.
This allowed me to stream items that I didn't want to sync.
I would do this by going to the 'sources' option and directly selecting my Mac Based iTunes library, rather than the ATV library.
With the new update, can you still stream unchecked items from the same iTunes library that you are syncing too?
If so how?
If not, I think this is a major let down???
Any help much appreciated.
FH

Depends on what you mean by unchecked.
If you don't check items in the sync options window (from device list) they won't get synced, but they will get streamed provided the item is checked alongside it's title in the main library window. If an item isn't checked alongside it's title in the main library window then it won't sync or stream.
All synced and streamed content from the same library now appears in a single list on the tv, namely 'my movies, my tv shows etc'. Only content from a secondary (streaming only) library will appear in a separate list on the tv, namely 'shared libraries'.

I have a music library on an iMac and I got a new iPhone and a new MacBook Pro and I want some of the songs from the iMac library to be on my phone and my MacBook Pro and I have a new Apple ID on my phone and my Mac book pro

I have a music library on an iMac and I got a new iPhone and a new MacBook Pro and I want some of the songs from the iMac library to be on my phone and my MacBook Pro and I have a new Apple ID on my phone and my Mac book pro, is this possible if so how do I do it?

Providing specifics on all the ways to do this will take more time than I am willing to spend here these days. You can do some of this with Home Sharing. You can transfer the entire library from one computer to another, If you do that you can delete what you don't want from the transferred library.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder. If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
You do not want to use a new AppleID. Change the AppleID on the new phone to the old ID. Purchases made with one AppleID cannot be transferred to a different one and it will be a royal pain to manage two Apple IDs.
Change iTunes Store account on an iOS device - Log out of your current account with Settings.app > Store (Settings > iTunes & App Stores on iOS 6) > tap on your AppleID. Log in with a different account. Note, turning on automatic downloads or re-download past purchases may tie the device to that account for 90 days - http://support.apple.com/kb/HT4627 https://discussions.apple.com/message/18484935 - "In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account") When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again."

Syncing & Streaming from the same Library? - Noob question

Good Evening - I have a silly noob question that I can't believe I can't find the answer to on my own: I have been trying to determine if it is possible to sync and stream from the same library simultaneously.
I purchased the 40GB aTV and it has been syncing just fine with my Windows iTunes. I told it not to sync a few albums I never listen to so I wouldn't have issues with other songs or movies. I am upgrading to a new iMac and I am am going to re-rip many of my existing CD's to get them into a consistent audio quality of 192 AAC or above. This is going to push my library size to well over the 40GB limit in just music, not including any movies or TV shows I choose to pull in.
The manual does not make it obvious (or I am not reading clearly) what happens to items that don't sync over - I assume they are still playable but will have to stream. Is there anyway to mark "preferred" albums or artists that should get synced and not streamed in case the iTunes library is unavailable for whatever reason?
Also, when I change libraries is the aTV going to completely re-sync even though the music is must going to be migrated?
Thanks for taking the time to answer these silly questions.

That's not quite what I was looking for.
My question remains, what happens to the items that can't be synced from my main library to my aTV? My library is just a smidge bigger than the available space on the aTV and not everything syncs over. Does that mean I won't be able to play those items not synced from my main library...
As my library grows I don't want to have to choose what does and doesn't get synced from my library by mood. For example, every year my wife buys new christmas music - right now I could exclude it and everything else gets copied over, but come thanksgiving that stuff better be there for her and I don't want to choose other music or movies to remove.
I guess I will just have to play to try it out.

How to remove photos from the photo library

How can I remove photos from the photo library?
I searched and tried the below method.
I connected to the PC and open iTunes. I clicked "photos" on the top. Then clicked the box "Sync Photos with" and choose the dropdown and "choose folder"
Then I clicked "desktop" option and chose an empty file and click "apply", "sync".
However, it doesn't work. Nothing has been removed.
I saw there is another method - deselecting the checkbox of the photo files. However, in my iTunes, there is no files has been selected.
How can I delete photos from the photo library? Thank you.

How did the photos get onto your device (and is it an iPad, iPhone, iPod Touch ?) ? Only photos that were synced from a computer can be deleted via iTunes, photos that were taken with it or saved from emails/websites on the iPad (or if it's an iPad copied to it via the camera connection kit) can be deleted directly in the Photos app, or you might be able to delete the via the import process : Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC.

How to retrieve photos directly from the iPhoto library?

I have over 18 GB and rising of photos in my iPhoto library. Suppose I had to change to a Windows machine or for some other reason I could not access my photos via iPhoto. Fanciful I know, but I am not so much concerned with the probability of something going wrong but with the calamity that would result if something did go wrong. I note that some years ago Microsoft changed the file structure of their Word files from a proprietary one to an open access one to allow easy access to the text. So how could my photos be retrieved directly from the iPhoto library?
Perhaps the answer is to send the library to a tech firm like the ones that retrieve data from damaged hard drives and they could pick off the photos and return them as a set of image files in a folder. But is it actually possible for anyone to do that?

If, at some time in the future, you want to get all of your original image files onto an external HD in folders representing the Events in your iPhoto Library here are the simple steps to follow:
1 - select all of the Events in your library.
2 - use the File ➙ Export ➙ File Export menu option and setup the export as shown in this screenshot:
3 - click on the Export button, select the destination where you want to save these folders and continue.

Is it possible to call a movieClip from the Flash library using XML?

Instead of using "test_1.swf" or "test_2.jpg" in the <IMAGE> tags shown below, we are wanting to call a movieClip from the same library as the .FLA via XML.
Is this possible using XML and AS3?
< ?xml version="1.0" encoding="UTF-8"?>
< all>
     < GROUP>
          <IMAGE>test_1.swf</IMAGE>
          <QUESTION>Question example #1</QUESTION>
          <OPTION1>Option A example</OPTION1>
          <OPTION2>Option B example/OPTION2>
          <OPTION3>Option C example</OPTION3>
          <IMAGE>test_2.jpg</IMAGE>
          <QUESTION>Question example #2</QUESTION>
          <OPTION1>Option A example</OPTION1>
          <OPTION2>Option B example/OPTION2>
          <OPTION3>Option C example</OPTION3>
     < /GROUP>
< /all>

data.xml:
< ?xml version="1.0" encoding="UTF-8"?>
< all>
     < GROUP>
          <IMAGE>MC1</IMAGE>
          <QUESTION>Question example #1</QUESTION>
          <OPTION1>Option A example</OPTION1>
          <OPTION2>Option B example/OPTION2>
          <OPTION3>Option C example</OPTION3>
          <IMAGE>MC2</IMAGE>
          <QUESTION>Question example #2</QUESTION>
          <OPTION1>Option A example</OPTION1>
          <OPTION2>Option B example/OPTION2>
          <OPTION3>Option C example</OPTION3>
     < /GROUP>
< /all>
// a.s.
var urlLoader:URLLoader=new URLLoader();
urlLoader.addEventListener(Event.COMPLETE,completeF);
urlLoader.load(new URLRequest("data.xml"));
function completeF(e:Event):void{
var xml:XML=XML(e.data);
var instance:*=stringToClassInstanceF(xml.GROUP.IMAGE[0]);
addChild(instance);
function stringToClassInstanceF(s:String):*{
var C:Class=Class(getDefinitionByName(s));
return new C();

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

I have a new computer now with windows 8. Old one was windows 7. The itunes library contains all I expect on new computer. Ipod will not sync with content. It says it is syncing but only picks up 1 tune. Solution please. I am on itunes 64 but it makes no

I have a new computer now with windows 8. Old one was windows 7. The itunes library contains all I expect on new computer. Ipod will not sync with content. It says it is syncing but only picks up 1 tune. Solution please. I am on itunes 64 but it makes no difference from 32 bit.

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I have an iPhone 3g. I cannot retrieve the photos from the photo library. Is there a way to get them off the iPhone?

I am using a Windows 64 bit premium, the phone is the 3g 16gig, and I cannot retrieve the photos from the photo library. I can retrieve the camera roll. How do I get the photos from the photo library?

I'm sorry I was not clear, I am extremely frustrated with iPhones right now. That is the reason my new phone is an Android!
I have a camera roll folder on the iPhone that has 346 photos that I took with the iPhone. I was able to retrieve those simply by connecting the iPhone to the computer. I have a second folder on the iPhone that is called Photo Library that has 818 photos that I wanted to retrieve from my iPhone. These photos were placed onto the iPhone from a sync, but my computer crashed and I had to format the hard drive. Doing so obviously caused me to loose all of my photos on my computer. The photos on the iPhone in the Photo Library are associated to the old computer folder library so it will not sync to the new computer. I was trying to retrieve those photos, but was not having any luck.
UPDATE! I remembered that I had backed up the computer hard drive to an external hard drive before the crash. I located ALL of the photos on that hard drive that I was trying to retrieve from the iPhone Photo Library.
*NOTE* If anyone has an answer to how to retrieve these photos, please post as my father is also have issues trying to retrieve photos the same way only he did not have his backed up.

Detaching Audio from clip from the film library panel?

I was wondering if anyone knows how to grab video only from the film library panel. I want to just pull video and not audio as I layout video only out onto my timeline and don't want to hasstle through detaching audio from each clip in the timeline. Does anyone know how to do this? I know Adobe Premier lets you do this but I'm fairly new to FCP and would like to know

Unchecking the audio in the sequence so that source/left A1 isn't connected(not touching) to timeline/right A1 will ensure audio is not added to the the a1 track.
In Premiere 5.5 if you unhighlight a1(source/left) and A1(timeline/right) no audio will be added to that track.
If you unconnect A1 & A2 in the sequence audio will never be added to timeline whether you drag a clip from a bin or insert/overwrite from the viewer window.

How do you delete photos from the photo library on iphone 5

how do you delete photos from the photo library on iphone 5

How to delete photos from your device:
In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Click Apply

Filter or Window function from the analysis Library

Similar Messages

Maybe you are looking for