Filter report on multiple select lists dynamically

Hello
Can somebody tell me how to filter/refresh a interactive report based on multiple select lists?
The select lists are created with apex_item.select_list_from_query, because I need to create them dynamically.

do not post duplicate questions/posts when you already have {message:id=10453848}
It doesn't make any sense

Similar Messages

Report Using Multiple Select

hi
I want to display a report with Multiple Select List like
http://apex.oracle.com/pls/apex/f?p=267:16:
Thanks
Edited by: 805629 on Jan 6, 2011 9:28 PM

Did you ever get this answered???
This is exactly what I am looking for!

How can i display Value in Report which i select from Multiple select list

Dear All,
i am using multiple select List in form with report page.
When i create new Entry with select Multiple value in Multiple Select List then in report Value display me in below format
my SQL Query are
select NAME D, CODE R from COUNTRY_MAS WHERE ACTIVE_FLG ='Y' order by NAME
AS:AI:AG:AM these are return value .i want to display NAME in report .
How can i do this ?
Thanks
Edited by: Vedant on Apr 25, 2012 11:14 PM

Short answer, use the apex_util.string_to_table to convert to a table; then you can either iterate through the table to generate a string of names, or accomplish the same with a bulk operation.
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDFEEJD
Encapsulate all this within a pl/sql function.

Multiple Select List does not Refresh with Dynamic Action

All,
Scenario:
Using APEX 4.2.2, I have a Select List page item (P4_SPONSOR) set to allow multiple values which has a dynamic LOV to populate the list. What I would like to do is highlight the display values based on another page item's value (P4_DRIVER_ID). When I set the source of P4_SPONSOR to static text, such as a delimited string of 1:2:3:4, any display values where the return values are equal to the static text are highlighted when the page loads.
Problem:
The problem lies in trying to use a query as a source for P4_SPONSOR which is filtered based on the other page item, P4_DRIVER_ID. For instance, my SQL Query (returning colon separated values) returns the same as the static text noted above. In the query's WHERE clause, I specify that the driver's ID is equal to P4_DRIVER_ID:
SELECT sponsor_id
FROM sponsors_drivers_xref
WHERE driver_id = :P4_DRIVER_ID;
This, as I understand it, would necessitate a refresh of P4_SPONSOR whenever the value of P4_DRIVER_ID changes. So, I have a Dynamic Action that does just that. When executed on the page, I can see the P4_SPONSOR multiple select list actually refresh, but none of the display values become highlighted.
Thoughts?
Thanks,
-Seth.

Seth,
A dynamic action refresh of your select list will refresh the list of values (this is what you are seeing), it will not refresh the value of the item itself. In fact, it will remove any values that you had already selected. To refresh the value you will need to add additional dynamic actions.
Create another dynamic action with:
Event: After Refresh
Selection Type: Item(s)
Item(s): P4_SPONSOR
If this was a normal select list you could just create a Set Value action and use your query to set the value of the select list. Since this is a multiple select list your will need to get your colon delimited value first and then use some javascript to set the values of your select list.
Create an hidden page item name P4_SPONSOR_TEMP.
Add a true action to your new dynamic action:
Action: Set Value
Set Type: SQL Statement
SQL Statement:
SELECT sponsor_id
FROM sponsors_drivers_xref
WHERE driver_id = :P4_DRIVER_ID;
Page Items to Submit: P4_DRIVER_ID
Selection Type: Item(s)
Item(s): P4_SPONSOR_TEMP
Add another true action to your new dynamic action:
Action: Set Value
Set Type: JavaScript Expression
JavaScript Expression:
$("#P4_SPONSOR_TEMP").val().split(":")
Selection Type: Item(s)
Item(s): P4_SPONSOR
--Jeff

Setting current values in Multiple Select List in SQL Query based Report

Hi,
I have a report based on a sql query that contains a multiple select list. Unfortunately I cannot get the multiple select list to display the current values (p_value) correctly. I have created a page item, :p311_current_versions, that is set using a pre-header process and it returns a value with a colon delimited format e.g. '10.1.2.1.0:10.1.2.2.0'. Then this item is used in the sql query to set the current value (p_value) of the apex_item.select_list_from_query function. However when the table is displayed, instead of having two entries, 10.1.2.1.0 and 10.1.2.2.0 selected, it has an extra entry '10.1.2.1.0:10.1.2.2.0' selected.
Here is my code:
select distinct a.product, a.version from (
select distinct
apex_item.display_and_save(2,product)||apex_item.hidden(1,env_product_id) PRODUCT,
APEX_ITEM.SELECT_LIST_FROM_QUERY(3,decode(product, 'HTTP Server' , :p311_current_versions, version), 'SELECT distinct version d, version r FROM ebs_tech_stack where
product ='''||PRODUCT||'''',
decode(PRODUCT, 'HTTP Server' ,'multiple="multiple" style="width:170px"','style="width:170px"'),
'NO') as version
from ebs_environment_tech_stack
where environment_id = :p311_umgebung_id) a order by a.product
If anyone can help me figure out how to set the current values correctly I'd be really grateful!!
Thanks in advance,
Jean

Jean,
I don't think this is possible using the apex_item package. The select_list_from_query function accepts only a single value for the second parameter.
Scott

Multiple selection lists in abap report

I need to populate a multiple selection list and then read the selection in an ABAP report. A parameter with list box is not solving my purpose.
Please give any suggestion on this.

Hi
If you can't use the SELECT-OPTION statament, there's no standard solution.
U can only try to create a table control with only one colunm and every hit of the table control is a single hit for the selection.
To insert a table control in a selection-screen u need to use the statament:
SELECTION-SCREEN BEGIN OF TABBED (see the help)
In order to create a TAB where u can load a subscreen where u can insert a table control.
The u need to transfer the hit from table control to a range.
Max

Multiple selection list and passing that value to oracle reports

Hi
I need to create a multiple selection list and then based on use selection, I need to pass that value to oracle reports. Can any one help with steps on how I can do this. Thanks

Hi
Concatenate the multiple values into a string separated by comma and then pass that string to report as a parameter.
In report query, you have to use the lexical parameter using ' & '
regards
SD

Multiple Select List not returning multiple values

I have created a Multiple Select List, and the manual says that when multiple values are selected and the page is submmitted (I'm using a GO button), the multiple values are put into the ITEM field, separated with a colon . However, whenever I select multiple entries in my list, it only ever returns a value for the first item (like a single select list).
Does anybody know what I may have missed ? I'm still fairly new to this stuff, so I'm hoping it's fairly simple!
thanks.
p.s I'm using a dynamic list of values.

Andy / Scott,
Sorry, please bear with me ... still new to this.
I have a multi select list item in page 2, called P2_MULTI_LIST. When the page is submitted, I no longer physically pass it to page 3, but how would page 3 pick up the value ? Do I need to set up a P3_MULTI_LIST item in page3 and set that item to the P2_MULTI_LIST value, or do I reference P2_MULTI_LIST directly in my Page3 SQL query ?
Also, if I then want to propogate the value in P2_MULTI_LIST down to another page from page3, via a link in a report, is this possible ?
thanks
Tim

Multiple select list in Safari 8.1 is broken again

Multiple select list is broken again in iOS 8.0.* and 8.1 Safari.
Few temp solutions can be found here until apple fixes this issue again.
Multiple Select box does not retain selected choice
Multiple Select on Safari - iPhone iOS 7

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

Multiple Select List looping thru PL/SQL function body returning SQL query

Hi,
I have a Multiple Select List. I want to loop through the values from the Select List and process them in a PL/SQL function body returning a SQL query. Currently, my code only returns the SQL SELECT results of one item in the select list. How do I change my code to make it return the results of all of the items in the select list? (I tested it and it is definitely picking up all the values in the select list).
<b>
DECLARE
selected_items HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
s VARCHAR2(20);
q varchar2(32767);
BEGIN
selected_items := HTMLDB_UTIL.STRING_TO_TABLE(:P50_SELECTED_INSTRUMENTS);
-- htp.p('COUNT: '||selected_items.count);
FOR i in 1..selected_items.count LOOP
s := TO_CHAR(selected_items(i));
-- htp.p('First: '||s);
-- htp.p('Second: '||:s);
-- htp.p('Third: '||TO_CHAR(selected_items(i)));
q:= 'SELECT '||
'SUBSTR(orig_geo_loc_sys,1,INSTR(orig_geo_loc_sys,''-'')-1) AS INSTRUMENT, '||
'SUBSTR(orig_geo_loc_sys,INSTR(orig_geo_loc_sys,''-'')+1, LENGTH'||
' (orig_geo_loc_sys)) AS ORIG_LINENUM, '||
'sum(orig_intrl) orig_intrl, '||
'sum(orig_extrl) orig_extrl, '||
'sum(recv_intrl) recv_intrl, '||
'sum(recv_extrl) recv_extrl '||
'FROM line_usage_sum_view '||
'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''' || s ||'%'' '||
--'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''2213003%'' '||
'AND switch_id = ''' || :P1_SWITCH_ID || ''' ' ||
'AND call_start_date > TO_DATE(''30-NOV-1999'') ' ||
'AND call_clear_time > TO_DATE(''30-NOV-1999'') '||
'AND '||
:SORTFIELD||' BETWEEN '||
'TO_DATE(:STARTDATE,''dd-MON-YYYY HH24:MI'') AND '||
'TO_DATE(:STOPDATE, ''dd-MON-YYYY HH24:MI'') '||
'GROUP BY GROUPING SETS (orig_geo_loc_sys)';
-- htp.p('SQL query: '||q);
RETURN q;
END LOOP;
END;</b>
Thank you,
Laura

Laura,
First, I would be careful of introducing SQL Injection possibilities. Any time I see
'Select ... ' || :P123_FOO || ' ... '
I worry about sql injection. In your case you are converting :P50_SELECTED_INSTRUMENTS into selected_items and then selected_items into s. So when I see
'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''' || s ||'%'' '||
I think, "I could use sql Injection and hack this."
So, I would do some validation on :P50_SELECTED_INSTRUMENTS or some other method to avoid this.
I'm not certain I understand your query. Do you really intend to allow the user to select the beginning of a string and then find all rows that start with that string? Or, do you just want to let them find when it matches the string. This is one way if you want to do matching:
DECLARE
selected_items HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
s VARCHAR2(32767);
q varchar2(32767);
BEGIN
-- Change the : separate string to be comma separated with quoted strings
s := '''' || replace(:P50_SELECTED_INSTRUMENTS, ',', ''',''')|| '''' ;
-- htp.p('COUNT: '||selected_items.count);
q:= 'SELECT '||
'SUBSTR(orig_geo_loc_sys,1,INSTR(orig_geo_loc_sys,''-'')-1) AS INSTRUMENT, '||
'SUBSTR(orig_geo_loc_sys,INSTR(orig_geo_loc_sys,''-'')+1, LENGTH'||
' (orig_geo_loc_sys)) AS ORIG_LINENUM, '||
'sum(orig_intrl) orig_intrl, '||
'sum(orig_extrl) orig_extrl, '||
'sum(recv_intrl) recv_intrl, '||
'sum(recv_extrl) recv_extrl '||
'FROM line_usage_sum_view '||
'WHERE TO_CHAR(orig_geo_loc_sys) in (' || s ||' ) '||
--'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''2213003%'' '||
'AND switch_id = ''' || :P1_SWITCH_ID || ''' ' ||
'AND call_start_date > TO_DATE(''30-NOV-1999'') ' ||
'AND call_clear_time > TO_DATE(''30-NOV-1999'') '||
'AND '||
:SORTFIELD||' BETWEEN '||
'TO_DATE(:STARTDATE,''dd-MON-YYYY HH24:MI'') AND '||
'TO_DATE(:STOPDATE, ''dd-MON-YYYY HH24:MI'') '||
'GROUP BY GROUPING SETS (orig_geo_loc_sys)';
-- htp.p('SQL query: '||q);
RETURN q;
END;
If you want to do something more like you originally stated, try this:
DECLARE
selected_items HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
s VARCHAR2(20);
q varchar2(32767);
BEGIN
selected_items := HTMLDB_UTIL.STRING_TO_TABLE(:P50_SELECTED_INSTRUMENTS);
-- htp.p('COUNT: '||selected_items.count);
q:= 'SELECT '||
'SUBSTR(orig_geo_loc_sys,1,INSTR(orig_geo_loc_sys,''-'')-1) AS INSTRUMENT, '||
'SUBSTR(orig_geo_loc_sys,INSTR(orig_geo_loc_sys,''-'')+1, LENGTH'||
' (orig_geo_loc_sys)) AS ORIG_LINENUM, '||
'sum(orig_intrl) orig_intrl, '||
'sum(orig_extrl) orig_extrl, '||
'sum(recv_intrl) recv_intrl, '||
'sum(recv_extrl) recv_extrl '||
'FROM line_usage_sum_view '||
'WHERE 1=1 ';
FOR i in 1..selected_items.count LOOP
s := TO_CHAR(selected_items(i));
q := q || ' and TO_CHAR(orig_geo_loc_sys) LIKE '''|| s ||'%'' ' ;
END LOOP;
q := q || ||'%'' '||
--'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''2213003%'' '||
'AND switch_id = ''' || :P1_SWITCH_ID || ''' ' ||
'AND call_start_date > TO_DATE(''30-NOV-1999'') ' ||
'AND call_clear_time > TO_DATE(''30-NOV-1999'') '||
'AND '||
:SORTFIELD||' BETWEEN '||
'TO_DATE(:STARTDATE,''dd-MON-YYYY HH24:MI'') AND '||
'TO_DATE(:STOPDATE, ''dd-MON-YYYY HH24:MI'') '||
'GROUP BY GROUPING SETS (orig_geo_loc_sys)';
-- htp.p('SQL query: '||q);
RETURN q;
END;
Hope this helps...
Anton

Using multiple select lists in ADF

Hi,
I am trying to use a multiple select list in my JSP page, and have a method in the ApplicationModule be called when the Struts action is called. I am following the example ADF tutorials, where the method is added to the ApplicationModule class, then dragged onto the Stuts Flow diagram (to associate it with an action).
I am able to create a dyna form bean for the page that contains the multi select as a type "java.lang.String[]" (string array). I am able get that values that were selected in a normal action's "execute" method. For example:
msf = (DynaActionForm) form;
String[] statusSelection = (String[]) msf.get("multSelectList");
However, I cannot seem to get the "multSelectList" values into a method in my Application Module class. The "multSelectList" is defined in my dynaFormBean as a String[] type. I am passing it in as an argument like the following....
public void setParams(String multSelectList[]) {
This results in the method not being called at all. I am not sure why. Does this have something to do with a String[] not being serializable??
However, if I just attempt to pass other types form items to the method, it works. For example:
public void setParams(String simpleCheckbox) {
Does anyone know how to use multiple select lists in conjunction with ADF?
P.S.
my multSelectList looks something like this:
<select name="multSelectList" multiple size="5">
<option value="ALL">Select All</option>
<option value="preferred">Preferred</option>
<option value="standard">Standard</option>
<option value="approved">Approved</option>
<option value="interim">Interim</option>
</select>

I got this working by changing the signature of the Application Module method to use ArrayList rather than String[], then you can marshal the Struts FormBean contents into an ArrayList to pass up.
To do this, subclass the DataAction by using "Go To Code" off of the context menu and then override the initializeMethodParameters() method:
protected void initializeMethodParameters(DataActionContext actionContext, JUCtrlActionBinding actionBinding)
    //Get the String Array from the Form Bean
    String[] selection = (String[])((DynaActionForm)actionContext.getActionForm()).get("multiSelect");
    //convert that to an ArrayList
    ArrayList selectionArr = new ArrayList( Arrays.asList(selection));
    //Add that object to the Arg List for the AM method
    ArrayList params = new ArrayList();
    params.add(selectionArr);
    actionBinding.setParams(params);
}

How to submit a multiple-selection list box in an Infopath Sharepoint form as multiple entries on a Sharepoint list?

I would like to be able to submit an Infopath form with a multiple selection list box in Sharepoint as multiple entries on a Sharepoint list.
For example, a user has to complete the following fields:
First Name:
Last Name:
Favorite Color (can select more than one):
[] Blue
[] Red
[] Yellow
[] Green
If the user picks blue AND red and submits the form, the Sharepoint list would feature TWO entries, both with their first and last names, but with different colors in the "Favorite Color" column.
Please let me know if there is a way to do this. Any guidance would be helpful!

Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Multiple select list selected options

Hello ;
how can i get the selected options of my multiple selected List
Thankyou

Multiple select list is a concatenated double quote delimited string
value_1:value_2:value_3
Where do you (how do you) want to "get" the selected options? You want to use
the selected value where?
I have couple of demonstrations on how to handle multi-select lists:
http://htmldb.oracle.com/pls/otn/f?p=31517:84
http://htmldb.oracle.com/pls/otn/f?p=31517:87
Denes Kubicek

Refresh classic report based on select list value selected

hello,
can anyone please help me out with this issue. I have a parameterized classic report based on a select list and I want to refresh this report whenever the select list value is changed. I am using oracle apex version 3.2. i just want to have a javascript function onchange event for the select list which refreshes my report whenever a value is selected.
My select list item is p1_datastore
select distinct datastore d,datastore r from my_table1 order by 1;
My classic report query is
select * from my_table2 where datastore = :p1_datastore order by last_updated_dt desc;
****************************************************thanks,
orton

can anyone please help me out with this issue.
thanks,
orton

Filter report on multiple select lists dynamically

Similar Messages

Maybe you are looking for