Filtering data based on Z field in BUT000 while running CRMM_BUP_SEND.

We have a Z field in BUT000. So while executing CRMM_BUPA_SEND i want to filter the data in BDOCs
( BUPA_MAIN and BUPA_REL ) based on this Z Field in BUT000.Can you guys provide your inputs?

HI Jerin,
Since you want to change the data during the Middleware data exchange, You can enhance the Middleware flow using custom FM in table CRMC_BUT_CALL_FU (can be accessed through Tcode CRMC_BUT_CALL_FU).
You can use a relevant FM, for example:
BPOUT BUPA 1000000 BUPA_OUTBOUND_MAIN
Now copy the FM & create a custom FM (you jsut need the interface parameters and not the actual source code). Inside this FM , you will get all the required data and you can even change it .
So, you can do your custom code here.
To put this FM in the flow, you will have to create an entry in the table
For example:
BPOUT BUPA 999999 ZZ_BUPA_OUTBOUND_MAIN
So, your custom FM will be executed before the standard one and all your custom code will get executed.
Hope this helps. Revert if you want more detailed explanation.
Reward points if this helps
Regards,
Alin

Similar Messages

How to display filtered data based on user login

We have a SSRS report (.rdlc) which gives the report about Online count of machines. Report is incoperayed in Asp.net.
We have many filters in This report. Now we have to retrict the report based on user login to the application .
For ex: report has a drop down for Regional Admin. Now if one person login to the application he has to view only his region online count.
How can we do this in SSRS?. We have our application hosted in Microsoft Azure . Please suggest

Hi csmbrnoc,
In Reporting Services, if we want to filter data based on user login, then there must be some relationship between the UserID and the Region in the dataset. For example, there is a field named UserID in the dataset, and each ID map some region and the corresponding
“Online count of machines”. In this scenario, just as Visakh suggested, we can use built-in field User!UserID to obtain UserID of the current user, then directly add a filter to the dataset as below:
Expression: [UserID]
Operator: =
Value: [&UserID]
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar to VA01 Item Data ,based on one field selection,other fields get populated in Table control for Custom table. How Do I do that. Plz suggest

I\
Moderator message : Search for available information, discussion locked.
Message was edited by: Vinod Kumar

Hi,
You need to create table events to do so.
Refer blog
http://wiki.sdn.sap.com/wiki/display/ABAP/TABLE+MAINTENANCE+GENERATOR+and+ITS+EVENTS

How to make Parameter field not mandatory while running CFL through SAP B1

Hi Experts.......
I have a small doubt if anybody can help me.......
I have created a simple report for testing purpose by taking table OITM and it is diplayng CFL symbol in B1 scressn when I import. Upto this it is working fine and showing correct input.
Now I made some changes according to my logic is that When I select any value in condition parameter say any Item Group it shows me output for that particular ItemGroup. And when I select nothing in Parameter then it is displaying all data from all the group and this si what I want. But when I import the same CR in SAP and running same report it is not allwoing me to paas Null value so that I can get all the data as output.
This is giving right result if I dirctly run CR by refreshinh Parameter but same thing I run from SAP and put the parameter field blank it is giving me error that Parameter (ItemGroup) is mandatory
Can anybody assist me how to solve this?
Thanks & Regards,
Rahul Moundekar

Hi
I had the same issue. As noted by Julie SAP published a workaround.
See my original thread post below. Go straight to the last entry.
Crystal in B1 8.8 - optional parameters not working
The problem is that when called from B1 the hasvalue command always returns true, hence the checking for nulls and spaces etc. as well.
You keep the parameter definition as Optional.
This works find for character fields, both single select and ranges, and I have gotten around it for numerics etc by using a SQL formula to cast these to character fields in the data being queried.
I have yet to be motivated enough to see how to code around this for multi valued fields.
Hope this helps.
Rob

SYST: Date 00.00.0000 not expected - error while running DTP.

I had a red alert in a process chain , the message showed TRASFORMATION IS INACTIVE , When I tried after activating DTP manually again gives the same error, atlast I ran the ACTIVE ALL routine again it shows the same message . It also shows SYST: Date 00.00.0000 not expected error.
Can anyone please help me in this issue?

This error message is typically associated with trying to populate a field that references 0DATE incorrectly. Check that all of your update routines are syntactically correct and that the data in your source is populated correctly too.
You should be able to see at which line of the generated transformation program that is failing by looking at any short dumps in ST22 or checking the job log in SM37. Place a breakpoint before this point and run through the load in debug mode to analyse if it is a specific data record or it is the update logic that is causing the error.
Regards,
Nick

Data-Driven test : Compilation should be avoided while running tests in batch when .csv file inputs changed to use them in script

Hi,
I am running Data-Driven test on different machines with different input values in .CSV file in batch mode.we are facing following problem:
Test not considering modified values in .CSV file until we recompile the test.
Is there any way to avoid this dependency of compilation after updating .CSV file???
Regards,
Nagasree.

Assuming the CSV is part of the Visual Studio solution. Open the properties panel for the CSV file from solution explorer. Set "Copy to output directory" to "Copy if newer" or to "Copy always". Some documents recommend
"Copy if newer" but I prefer "Copy always" as occasionally a file was not copied as I expected. The difference between the two copy methods is a little disk space and a little time, but disks are normally big and the time to copy is normally
small. Any savings are, in my opinion, far outweighed by being sure that the file will be copied correctly.
See also
http://stackoverflow.com/questions/23469100/how-to-run-a-test-many-times-with-data-read-from-csv-file-data-driving/25742114#25742114
Regards
Adrian

Filtering report data based on user login and Parameter fields

Post Author: mronquillo
CA Forum: General
Hi,I am running a report that filters data based on the user login. To do this, I created a formula called @user that compares the login name (using the CurrentCEUserName field) and returns the user's name. If the user login is not a login specified in the if statements, it returns the parameter field "user_name":For example: if CurrentCEUserName = "loginname1" then "User's Name 1"else if CurrentCEUserName = "loginname2" then "User's Name 2" else if CurrentCEUserName = "loginname3" then "User's Name 3" else if CurrentCEUserName = "loginname4" then "User's Name 4".. .else {?user_name} In select expert, I have a condition which filters data based on the string returned from that formula:{Table.Name} = {@user} This works fine and when the users run the report they only their own data. However, they are still prompted to choose a parameter field regardless if of the value returned by the @user formula. Oddly enough, regardless of what parameter field they choose, they will still only see their own data (i.e. if John chooses "Bob" from the parameter list, he will still only see John's data.)If I remove the "else {?user_name}" line from the @user formula, then the users are not prompted anymore. However, if they are not a "valid" user - that is, if any of the if statements in the formula are not true for their login name - then they will see no data. What I want to do is make the report ONLY prompt the user to choose a parameter field if their login name is not "valid". That is, if the @user formula is able to return a string value for their login name, then they will jump right into the report without being prompted to choose a parameter - otherwise, the user will be prompted to choose a name from the parameter list. I thought my formula would allow this (hence the "else" clause), but it seems that if a parameter field is present in any formula, then the report automatically prompts the user to choose a parameter. Is what I am trying to accomplish possible in CR (I'm using CR v10.0) or is there a better way to do what I am trying to do?Thanks in advance.

Post Author: sharonmtowler
CA Forum: General
try, or something like that
(if CurrentCEUserName ={?user_name} then true else ({Table.Name} = {@user}) )

How to creat a Data provider based on different fields in SAP BW ?

Hi,
Experts,
There are 20 fields of Plant Maintainace like :
SWERK
BEBER
STORT
TPLNR
EQUNR
INGRP
QMDAT   ---peroid
STTXT
QMDAT - Date of Notification
QMNUM
QMTXT
QMART
AUSVN
AUZTV
AUSBS
AUZTB
AUSZT
ERNAM
QMDAB
AUFNR
I want to creat a Report based upon these fields ?
For that I h'v checked the relevant Fields to the   existing standard Datasource in Bw side   &
Checked cubes   created based upon these Datasource in Bw side !
i h'v found some fields are existing different cubes & some are missing .
How to creat a Data provider based on different fields in SAP BW ?
plz suggest      !!!!!!!
Thanx,
Asit
Edited by: ASIT_SAP on Jul 15, 2011 6:25 AM
Edited by: ASIT_SAP on Jul 15, 2011 6:27 AM
Edited by: ASIT_SAP on Jul 15, 2011 12:37 PM

Hi Lee, Please see below..
DECLARE @Machine2 TABLE
DispatchDate DATE
INSERT INTO @Machine2 VALUES ('2014/02/01'), ('2014/02/02'), ('2014/02/03')
DECLARE @DateFrom DATE
SELECT @DateFrom = DATEADD(D,1,MAX(DispatchDate)) FROM @Machine2
SELECT @DateFrom AS DateFrom
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

Role based oracle adf security and filtering data

while oracle adf security looks great its only role based... does anyone know of any resources describing an architecture where this is used in addition to filtering of data based on say, organization?
it seems that oracle adf security is not really geared towards a self service app where administrative users have a security interface as part of the application where they can assign roles and associate users to entities for the further filtering of data...

Hi,
it seems that oracle adf security is not really geared towards a self service app where administrative users have a security interface as part of the application where they can assign roles and associate users to entities for the further filtering of data...
ADF Security is a JAAS based security implementation to protect resources (like entities). It is nota security provider like OPSS or OID which you can use for user provisioning and self service (if you code against the IDM APIs). ADF Security only checks for whether a user is authenticated and if the user has the permission to perform a task.
However, you can use groovy to access the security context from Groovy, which allows you to add the authenticated username to a query - for example to filter recrds out that match the username in one of its attributes.
For example, you could create a ViewCriteria that for example filters the query by a specific attribute. Say that managers can see data starting from department 10 whereas employees can see data starting from department 100. The ViewCriteria would reference a bind variable with the following default setting
adf.context.securityContext.isUserInRole('manager')? 10 : 100
Frank

Sorting issue on - around 20 records based on one field Data Manager

Hello Experts,
We are facing issue sorting some records which belong to one contract.
if we sort by one field ie item no, it is not sorting based on this field. This issue only one set of contract only.
For other set of data, sorting is working fine.
Any hint will be appreciated.
Thanks in advance

HI saptest,
I have not heard of such a issue,please provide detailed description of the same to give a better idea.
Thanks,
Ravi

Displaying internal table fields data based on user selection

Hi all,
I am having a checkbox for each field in the internal table.
and i only have to display the fields of the internal table which the user has selected based on the check boxes provided.
Could you plz help me out, how can i display the data of only those fields which the user has selected initially.....
Thanks,
anil.

Hi,
This is not the best solution but this can be one solution.
Check this code
REPORT z_sdn.
PARAMETERS:
p_kunnr AS CHECKBOX DEFAULT 'X',
p_land1 AS CHECKBOX,
p_name1 AS CHECKBOX.
DATA:
BEGIN OF fs_tab,
    kunnr     TYPE kunnr,
    land(10) TYPE c,
    name(10) TYPE c,
END OF fs_tab.
DATA:
t_tab LIKE
TABLE OF
        fs_tab.
START-OF-SELECTION.
CLEAR fs_tab.
fs_tab-kunnr = '001'.
fs_tab-land = 'Land1'.
fs_tab-name = 'Name1'.
APPEND fs_tab TO t_tab.
CLEAR fs_tab.
fs_tab-kunnr = '002'.
fs_tab-land = 'Land2'.
fs_tab-name = 'Name2'.
APPEND fs_tab TO t_tab.
IF p_kunnr = 'X' AND p_land1 IS INITIAL AND p_name1 IS INITIAL.
    WRITE: / 'KUNNR:'.
    LOOP AT t_tab INTO fs_tab.
      WRITE: / fs_tab-kunnr.
    ENDLOOP.
ENDIF.
IF p_land1 = 'X' AND p_kunnr IS INITIAL AND p_name1 IS INITIAL.
    WRITE: / 'LAND:'.
    LOOP AT t_tab INTO fs_tab.
      WRITE: / fs_tab-land.
    ENDLOOP.
ENDIF.
IF p_name1 = 'X' AND p_kunnr IS INITIAL AND p_land1 IS INITIAL.
    WRITE: / 'NAME:'.
    LOOP AT t_tab INTO fs_tab.
      WRITE: / fs_tab-name.
    ENDLOOP.
ENDIF.
IF p_kunnr = 'X' AND p_land1 = 'X' AND p_name1 IS INITIAL.
    WRITE: / 'KUNNR:',
             'LAND'.
    LOOP AT t_tab INTO fs_tab.
      WRITE: / fs_tab-kunnr,
               fs_tab-land.
    ENDLOOP.
ENDIF.
IF p_kunnr = 'X' AND p_name1 = 'X' AND p_land1 IS INITIAL.
    WRITE: / 'KUNNR:',
             'NAME'.
    LOOP AT t_tab INTO fs_tab.
      WRITE: / fs_tab-kunnr,
               fs_tab-name.
    ENDLOOP.
ENDIF.
IF p_name1 = 'X' AND p_land1 = 'X' AND p_kunnr IS INITIAL.
    WRITE: / 'LAND:',
             'NAME:'.
    LOOP AT t_tab INTO fs_tab.
      WRITE: / fs_tab-land,
               fs_tab-name.
    ENDLOOP.
ENDIF.
IF p_name1 = 'X' AND p_land1 = 'X' AND p_kunnr = 'X'.
    WRITE: / 'KUNNR',
             'LAND:',
             'NAME:'.
    LOOP AT t_tab INTO fs_tab.
      WRITE: / fs_tab-kunnr,
               fs_tab-land,
               fs_tab-name.
    ENDLOOP.
ENDIF.
Regards
Abhijeet

User-filtered report based on date range

I am struggling with trying to implement a basic search that includes an optional date range for the data. The form looks the way I want it, but I can't seem to get the right syntax in the query. I can't get anything other than "no rows" to show up in the query if I implement a clause selecting records based on the time.
Here is a working query (without the time):
select m.AUDIT_ID, m.TIMESTAMP, m.LOC_ID, a.AREA, s.SUBAREA, d.OBSERVATIONS
from transys.SAFETY_AUDIT_MAIN m, transys.SAFETY_AUDIT_DETAIL d,
transys.SAFETY_AUDIT_AREA a, transys.SAFETY_AUDIT_SUBAREA s
where m.AUDIT_ID = d.AUDIT_ID (+)
and d.AREA_ID = a.AREA_ID
and d.SUBAREA_ID = s.SUBAREA_ID
and s.SUBAREA_ID NOT IN (198,199,398,399,498,499,798,799,898,899,999)
and (instr(upper(a.AREA),upper(nvl(:P210_SEARCH,AREA))) > 0
or instr(upper(s.SUBAREA),upper(nvl(:P210_SEARCH,SUBAREA))) > 0
or instr(upper(d.OBSERVATIONS),upper(nvl(:P210_SEARCH,OBSERVATIONS))) > 0)
I want to compare the m.TIMESTAMP column with page items P210_FROM_DATE and P210_TO_DATE.
I would also like to add in an optional filter comparing m.LOC_ID to P210_LOCATION, and I can't seem to figure out the "optional" part.
Any ideas would be helpful.

The query as I posted it returns 3 values, but it is not syntactically identical to the one APEX is using. I would be happy to get 3 rows in APEX because at least that way I would know I have the date formatting correct, and just needed to tweak the logic. When I execute the query in APEX, however, I get either "there is no data to display" or I get a formatting error - "X is not a valid month" - depending on how I use TO_CHAR and TO_DATE to try and synchronize the various date inputs with the field.
If it is a query issue (which it may be), I am still suspecting that it is something to do with the formatting of the dates involved. Just as in APEX, it could be something simple, but I suspect it is a mismatch in the formatting somewhere.
Maybe I'll try making a view of the underlying table and experimenting with the date in the view. That should enable me to see if it is the formatting in the query or the formatting in APEX that is causing the problem. Or it could even eliminate formatting as the problem as well.
PS. I had a similar struggle trying to implement some triggers against this database that used date values. NLS_TIMESTAMP_FORMAT is set to 'YYYY-MM-DD HH24.MI.SS.FF'. I ended up converting every date that I pulled from the database into a known format with TO_CHAR and then converting it back into a date with TO_DATE. It was the only way to be able to compare the date values without getting these same kinds of errors.

Can we change the data type of a field based on the value of the field

HI Gurus,
My Requirement is as below -- Could you please guide me
in the Printable Adobe form -- for ex - as usual for dates fields in the Object Pallette the object type is a date/time field and for quantity/currency fields corresponding fields are taken
now in case the either the date, quantity or currency is initial in place of displaying 0.00 or empty date we need to display N/A (Not Applicable)
for this I would like to change the data type of the field
to put it simply --
we need to change the data type of date field from DATE&TIME to Char type to hold N/A or Quantity field to Char field to hold N/A
how can we realize this in SAP adobe forms
Thanks in Advace
Ramchander Rao.K

Hello Ramchander,
     You cannot change the data type of the field at run time in Adobe forms because the type of field you choose at the time of design level is associated with the data type itself.
If you want to achieve your requirement, then your main idea should be to set the data type as CHARACTER itself while designing the field in the adobe form itself. CHAR field will comfortably hold the value of Calculation/amount field, Currency field, Amount, Date, Time HHMMSS, Unit Accuracy, Currency key, Floating point number, Numeric text, Client, Language and many other data types.
After designing the field as TEXT field in Adobe form you have two options.
Option 1:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms.
Suppose the name of the field is TEXTFIELD1, then write the Javascript code on this field in Initialize event as below.
if ( this.rawvalue == null )
     this.rawvalue = "N/A";
If the field is not blank, then it will show the date. Else it will show "N/A".
Option 2:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms. Do the formatting part in ABAP itself. It will increase the performance. Avoid Javascript as much as possible.
Suppose you have a DATE variable l_dats of type DATS. Then take another variable l_date of type CHAR. Then write the below ABAP code.
MOVE l_dats TO l_date.
IF l_date IS INITIAL.
     l_date = 'N/A'.
ENDIF.
Bind the l_date to the TEXT field in the form.
Even in this case, if the field is not blank, then it will show the date. Else it will show "N/A".
But I will suggest you to use Option 2 of keeping the AMOUNT, QUANTITY, DATE, TIME fields etc as CHAR or TEXT fields in Adobe form and do the required formatting in ABAP itself.

Filtering View Data Based on Location Value

Hi,
I have a mangers view in my list.
we have some cluster values like this:
AP/AU/MK
BD/CO/EN/MV
BE/CR/LH
BO/KM/KG
BP/BU/GR/WC
DM/KT/WM
I wrote CAML query for fetching data based on filter condition(i.e. Cluster value)
<Query>
<Where>
<Eq>
<FieldRef Name="Cluster"/>
<Value Type="Text">AP/AU/MK</Value>
</Eq>
</Where>
</Query>
But i getting only "AP/AU/MK" cluster data only.I want manuvally w/o hot coding cluster value.
Help me.
Thanks

Hi,
I wrote that code in SharePoint designer under <Query>
Now i am able to filter AP/AU/MK cluster data.Because i hotcode AP/AU/MK cluster in Query.
<Query>
<Where>
<Eq>
<FieldRef Name="Cluster"/>
<Value Type="Text">AP/AU/MK</Value>
</Eq>
</Where>
</Query>
if again i want BE/CR/Lh cluster data.i need to change that query. i don't want like that. we want manuvally
thanks:

Filtering data at the Source based on Document Type for 2LIS_02_ITM

Hello All:
I am trying to filter data based on certain purchasing document type for 2LIS_02_ITM and _SCL datasources.
I want to filter in R/3 instead of in BW
Any ideas on how to go about ?
Regards
Vijay

Vijay,
you are getting data for all the Document Types, so no need of any select Statements.
use this code in your User Exit. and let me know if you have any questions.
CASE I_DATASOURCE.
WHEN '2LIS_02_SCL'.
Delete C_T_DATA where BSART eq C.
ENDCASE.
Note: you need to give Document types which r not required fro BW extraction in EQ.
'C' i gave for test... give the document types which r not required for you.
all the best.
Regards,
Nagesh Ganisetti.

Filtering data based on Z field in BUT000 while running CRMM_BUP_SEND.

Similar Messages

Maybe you are looking for