Filtering View Data Based on Location Value

Hi,
I have a mangers view in my list.
we have some cluster values like this:
AP/AU/MK
BD/CO/EN/MV
BE/CR/LH
BO/KM/KG
BP/BU/GR/WC
DM/KT/WM
I wrote CAML query for fetching data based on filter condition(i.e. Cluster value)
<Query>
<Where>
<Eq>
<FieldRef Name="Cluster"/>
<Value Type="Text">AP/AU/MK</Value>
</Eq>
</Where>
</Query>
But i getting only "AP/AU/MK" cluster data only.I want manuvally w/o hot coding cluster value.
Help me.
Thanks

Hi,
I wrote that code in SharePoint designer under <Query>
Now i am able to filter AP/AU/MK cluster data.Because i hotcode AP/AU/MK cluster in Query.
<Query>
<Where>
<Eq>
<FieldRef Name="Cluster"/>
<Value Type="Text">AP/AU/MK</Value>
</Eq>
</Where>
</Query>
if again i want BE/CR/Lh cluster data.i need to change that query. i don't want like that. we want manuvally
thanks:

Similar Messages

Is it possible to regroup data based on attribute value of a tag?

is it possible to regroup data based on attribute value of a tag?

Hi Rajeev,
You can filter records during import if one of the Matching field is of type Lookup.
In your case if you create City as flat lookup table in MDM & maintain lookup values in DM(Just as an example), then you can import only records where city is HYD.
Map Name & City, Then in Match Records tab select both the fields (Combination)
then right click on it & select Filter.. option.
Now new pop up will open where you be able to see ur Lookup table values, from there select HYD and Add
Now in default Import Action, set Create Action for None/None (All other will be skip)
This way you will import only HYD records.
But this is possible only on Lookup fields & not foe Text fields
Hope this will help you
Thanks & Regards,
Mahi

SSRS report with tabular model - MDX query to filter parameter data based on Tuple value.

Hello Everyone,
I am working on SSRS report in which a tabular model is being used as a backend.
I want to filter the report parameters which are dependent to other parameters. Like, country, state, and cities drop downs.
All are multi-select parameters. I am using MDX queries to filter the parameters data.
Based on selected one or more countries, the data of states needs to be filtered.
The point is the text which is being displayed in state dropdown for each state name is combination of 3 different members.
So, I created the following Tuple for the same and can see the expected display names in states dropdown.
"("+
[Location].[Code 1].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Code 2].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Descr].CURRENTMEMBER.UNIQUENAME +")"
Now, when I would like filter the cities data based on selected one or more states, I am unable to pass the multiple Tuples (more than one selected Tuples) as parameter for cities dropdown.
The following is my query for City parameter. It is working well when I select only one State from the dropdown.
However, when I select multiple states, it is unable to convert the Tuple into SET in ELSE part of IIF condition specified in following query.
Can anybody help me how to resolve the error that I am getting about STRTOSET function?
Or
Are there any other alternatives to achieve this requirement?
Any help would be much appreciated.
Query:
WITH MEMBER [Measures].[ParameterCaption] AS [City].[City Business].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS [City].[City Business].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS [City].[City Business].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS ,
[City].[City Business].Children ON ROWS
FROM (
SELECT ( STRTOSET(@State, CONSTRAINED) ) ON COLUMNS FROM [Model])
WHERE ( IIF( STRTOSET(@State).Count= 1,
STRTOTUPLE(@State, CONSTRAINED),
STRTOSET("{
("+
[Location].[Code 1].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Code 2].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Descr].CURRENTMEMBER.UNIQUENAME
+ ")
}",CONSTRAINED )) ) CELL PROPERTIES VALUE
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Hi,
I used following dynamic query in expression of dataset of parameter and it works like a charm.
"WITH MEMBER [Measures].[ParameterCaption] AS [City].[City Business].CURRENTMEMBER.MEMBER_CAPTION "&
"MEMBER [Measures].[ParameterValue] AS [City].[City Business].CURRENTMEMBER.UNIQUENAME "&
"MEMBER [Measures].[ParameterLevel] AS [City].[City Business].CURRENTMEMBER.LEVEL.ORDINAL "&
"SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , " &
"[City].[City Business].Children ON ROWS " &
" FROM [Model] WHERE ({"& join(Parameters!Location.Value,",") &"}) CELL PROPERTIES VALUE"
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Filtering report data based on user login and Parameter fields

Post Author: mronquillo
CA Forum: General
Hi,I am running a report that filters data based on the user login. To do this, I created a formula called @user that compares the login name (using the CurrentCEUserName field) and returns the user's name. If the user login is not a login specified in the if statements, it returns the parameter field "user_name":For example: if CurrentCEUserName = "loginname1" then "User's Name 1"else if CurrentCEUserName = "loginname2" then "User's Name 2" else if CurrentCEUserName = "loginname3" then "User's Name 3" else if CurrentCEUserName = "loginname4" then "User's Name 4".. .else {?user_name} In select expert, I have a condition which filters data based on the string returned from that formula:{Table.Name} = {@user} This works fine and when the users run the report they only their own data. However, they are still prompted to choose a parameter field regardless if of the value returned by the @user formula. Oddly enough, regardless of what parameter field they choose, they will still only see their own data (i.e. if John chooses "Bob" from the parameter list, he will still only see John's data.)If I remove the "else {?user_name}" line from the @user formula, then the users are not prompted anymore. However, if they are not a "valid" user - that is, if any of the if statements in the formula are not true for their login name - then they will see no data. What I want to do is make the report ONLY prompt the user to choose a parameter field if their login name is not "valid". That is, if the @user formula is able to return a string value for their login name, then they will jump right into the report without being prompted to choose a parameter - otherwise, the user will be prompted to choose a name from the parameter list. I thought my formula would allow this (hence the "else" clause), but it seems that if a parameter field is present in any formula, then the report automatically prompts the user to choose a parameter. Is what I am trying to accomplish possible in CR (I'm using CR v10.0) or is there a better way to do what I am trying to do?Thanks in advance.

Post Author: sharonmtowler
CA Forum: General
try, or something like that
(if CurrentCEUserName ={?user_name} then true else ({Table.Name} = {@user}) )

Pivot table that uses a Stored Procedure parameter and filters the data based on it

Hello, my 1st post. I am lost. Please help.
I am trying to create an Excel Pivot Table that has data that comes from an ODC but needs to be filtered based on a parameter from a Stored Procedure. This involves Project Server. I need to filter the results based on the RBS value of the logged
in user. My Stored Procedure can return the RBS as long as the ResourceNTAccount value is given. I cant figure out how to tie this all together.

Hi,
Based on your description,I think this issue should be more related to Programming/coding, you can sumbit a new case to MSDN forum.
As I'm not quite formular with Project Server, all I can tell you is that it is easy to running a Stored Procedure within Excel, however, if you have to pass dynamic parameters you’ll have to turn to VBA.For detailed information,please refer
to:
http://blogs.office.com/2010/06/07/running-a-sql-stored-procedure-from-excel-no-vba/
Wind Zhang
TechNet Community Support

Filter data based on the value of sorce field in mapping

Hi,
I have a scenario (IDOC to file) where i have to move data to target file, only when one of the source fields has particuler value. Otherwise skip the record, no need to write into output file.
Please let me know how to handle it in mapping, without BPM.

Karthik,
Ofcourse there is no need of BPM, You can use the IF without Else function in your mapping with using Equals function.
Example:
Field1 ---> Equals (Particualr Value) -
> IF -
> Then -
> pass it to Target field.
Since there is no Else option, therefore whenever condition will fail, nothing will be passed to the target field.
Regards,
Sarvesh

How to view data pump dir location?

I see that DATA_PUMP_DIR is defined in database [in DBA_OBJECTS]
But how do I find out the location of DATA_PUMP_DIR?
Thanx

select * from dba_directories where DIRECTORY_NAME = 'DATA_PUMP_DIR';

Filtering out rows based on field value

Hello,
I have something like this:
create table stuff
avalue varchar2,
anothervalue varchar2,
thirdvalue varchar2,
anumber number
INSERT INTO stuff Values('abc', 'cde', efg', 2);
INSERT INTO stuff Values('abc', 'cde', efgggg', 4);
INSERT INTO stuff Values('abc', 'xxx', efg', 1);
INSERT INTO stuff Values('abc', 'xxx', efgxxx', 2);
INSERT INTO stuff Values('abc', 'yyy', efg', 2);
I would like to recieve the rows with the higest 'anumber'-value, grouped by 'avalue', and 'anothervalue' (but not 'thirdvalue'). So in this example I want row 2, 4 and 5.
Anyone have an idea? I'm thinking a 'order by desc' is not the best way here?

select avalue,
        anothervalue,
        thirdvalue,
        anumber
from (
         select s.*,
                 rank() over(partition by avalue,anothervalue order by anumber desc) rnk
           from stuff s
where rnk = 1
AVALUE     ANOTHERVAL THIRDVALUE    ANUMBER
abc        cde        efgggg              4
abc        xxx        efgxxx              2
abc        yyy        efg                 2
SQL> SY.

Use of filters and aggregations based on hierarchy nodes in an update rule

Hello,
I need to calculate some indicators from a ODS (BW 3.5) that contain raw data to another one that will contain indicators. These figures are the results of the use of filters and aggregations based on hierarchy nodes (for example: all sales accounts under a node).
In fact, this is typically a query but I want to store these figures, so I need
I understood I have to use a start routine. I never did that before.
Could you provide me with easy-to-understand-for-newbies examples of:
- filtering data based on the value of an infoobject (value must be empty, for example)
- filtering and aggregation of data based on the appartenance to hierarchy nodes (all sales figures, ....)
- aggregation of the key figures based on different characteristics after filtering of these
Well, I am asking a lot ...
Thank you very much
Thomas

Please go through the following link to learn more on aggregates:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e55aaca6-0301-0010-928e-af44060bda32
Also go through the very detailed documentation:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a
Regards,
Mahesh

How to display filtered data based on user login

We have a SSRS report (.rdlc) which gives the report about Online count of machines. Report is incoperayed in Asp.net.
We have many filters in This report. Now we have to retrict the report based on user login to the application .
For ex: report has a drop down for Regional Admin. Now if one person login to the application he has to view only his region online count.
How can we do this in SSRS?. We have our application hosted in Microsoft Azure . Please suggest

Hi csmbrnoc,
In Reporting Services, if we want to filter data based on user login, then there must be some relationship between the UserID and the Region in the dataset. For example, there is a field named UserID in the dataset, and each ID map some region and the corresponding
“Online count of machines”. In this scenario, just as Visakh suggested, we can use built-in field User!UserID to obtain UserID of the current user, then directly add a filter to the dataset as below:
Expression: [UserID]
Operator: =
Value: [&UserID]
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Filtering of the data based upon the selection screen data using ldb

Hi Experts ,
I am using ldb pnpce, for my report ,and i created my own report category with selection paramaters
action type and payroll area
now the problem is when i am giving the action type as Z0 ,the data to be extracted is not getting filtered
based upon the action type ,the data consists the records having different action types other than Z0
Please give me some solution for this

Thanks Durga ,but the link wat ever u was for hiding the selection screen fields
but my question is when am using get pernr event my data is not getting filtered with the selection screen paramater value
i,e m giving action type as only hiring ,but m getting the data for all the action types ,its not filtering based upon my selection

SSRS Matrix report to show or hide year column based on parameter value "Date" selected.

Hey experts!
I have a requirement an ssrs matrix report should display columns (year/s) based on parameter value (date/s).
My Dataset fileds are: Product, Year_name, Month_name, Date
Currently my report output looks like this-
Param Date: 2013-08-01 00:00:0.000
Product +Calender2011 +Calender2012 -Calender 2013........ +Calender2014
Total
Total Jan13 Feb 13 Mar13.. Dec13 Total Total
Abc 100
220
10 20 30....... 20 250 400
Xyz 110
200 50 80 40....... 30 450 600
My requirement: if I'm selecting Date parameter value as '2013-xx-xx' I should only able to see Year column 'Calender2013' and rest of the years should hide. Similarly If I'm selecting Date parameter value as '2014-xx-xx' I should only able to
see Year column 'Calender2014' .
Appreciate your kindly help.
Afan

Hi Afan,
According to your description, you want to only show the selected year on your report, right?
In this case, you need to get the year from the date parameter using the expression below
=Year(Parameters!Date.Value)
And then use the expression below to get the year from Year_Name field.
=Right(Fields!Year_Name.Value,4)
Then add a filter to the dataset to filter the data like below
Expression:=Year(Parameters!Date.Value)
Operator:=
Value:=Right(Fields!Year_Name.Value,4)
Reference
http://msdn.microsoft.com/en-IN/library/dd255287.aspx
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

Autopopulate data in listitem based on the value of data in other itemlist

Hi,
In my project there is requirement of populating the data in based on the value populated in other list item.
For ex in list box item we select value 'PE' then in second list box based value of PE should be populated.If we select other value for ex 'PA' then in second list other valu is populated.So how can we populate the data in second itemlist based on the value selected in the first listitem

Hello,
<p>In this article, you can find a dialog sample that does that (section : 2.4.2)</p>
Francois

How to restrict a table with its set of data based on a column value in it?

Hi,
I have a scenario in which I have to show a set of data of a pivot table by restricting data based on a column value. I am creating BIP report whose source is from BIA ie.RPD. Based on a column value I want to restrict the data being displayed in the table. Since I also want the hidden data in the first table to be displayed in another table in the same report I cannot restrict the data at the query level i.e at RPD or at BIA. For this reason I used
<?xdofx:if saw3_ = 1?>
the pivot table
<?end if?>
But it does not restrict any data.
Also I tried using the if condition inside the table before the row level looping happens. But no good show even then.
How can I forgo this problem?
Regards,
The MM

Hi,
See : http://download.oracle.com/docs/cd/E12096_01/books/PubUser/T421739T481157.htm#4535373 regarding column and row.
Regards,
Colectionaru

How to insert values using pushputtons in text item & fetch data based on

Dear friends,
I want to insert values in the Text item using pushbutton e.g to insert 05CST884 into text item using pushbuttons '0' '5' 'C' 'S' 'T' '8' '8' '4' (alpha numeric buttons) in the layout editor and then fetch data based on the number entered with that of one in the table in the another text item2 in the layout editor.
Suggestions regarding how to develop and use effective triggers are welcome.

At the block level (for the control block where all your push buttons are, let's call it block1) create a WHEN-BUTTON-PRESSED trigger. Your [A-Z] and [0-9] buttons should be on a dedicated non-database datablock to reduce problems. As stated previously, this trigger should just contain the code:
:block2.text_item := :block2.text_item||get_item_property(:system.trigger_item, label);
Also on the pushbutton block, create a backspacve button with its own dedicated WHEN-BUTTON-PRESSED trigger containing:
if length(:block2.text_item) > 0 then :block2.text_item := substr(:block2.text_item, 1, length(:block2.text_item)); end if;
This will hopefully erase the last character entered.
block2 should be based on the database table (see Property Palette --> Database) you wish to query and text_item should be based on the database item which contains the code you entered. All the other database items you wish to displayshould also be added to block2.
Add another FIND push button to block1 with the code:
go_block('block2');
execute_query;
Without writing the whole thing for you, I'd suggest you get a decent Forms tutorial book to guide you through the basics (Oracle Forms Developers Handbook).

Filtering View Data Based on Location Value

Similar Messages

Maybe you are looking for