Filtering Interactive Reports with Greater Than Less Than Operators

The available filter operators in the interactive reports do not include greater than or less than. How is it possible to enable an application user to filter records where greater than or less then logic is needed?
For example the user wants to query records where sysdate falls between a start and end date.
Regards,
Todd

Ya know, that's all well and good ... BUT ... WHAT IF you do want to sort text type columns with Greater Than and Less Than operatiors??
SQL does it just Fine ... so WHY does APEX have the limit??? This is an Oracle BUG ... it SHOULD NOT limit the operators ... I realize "they" may be trying to be helpful with proper constraints to field searches ... but ... if SQL can do it, then ... no need for a limit.
EG ...
Show the records where
the "Begin_Year-Wk" data is less than or equal to "2009-09" AND
the "End_Year-Wk" data is greater than or equal to "2009-04"
... to give everything that was running in that 5 week period whether or not it starts within that time frame
I can run this query perfectly fine via SQL ... but not in APEX ... unless I reconvert a lot of strings back to numbers, and for sorting / formatting / explain-to-user purposes, I really don't want them to be numbers.
So ... there's gotta be a hidden tweak for operators somewhere ...

Similar Messages

User input formula variable with greater than/less than operators for KFG

Hello all,
I have used a formula in my query that is a difference of two key figures .For e.g:
Difference = tax from system A - tax from system B.
Now when the users run the report they should be prompted for the 'Difference' threshold for seeing the report say where difference is greater 100 or equal to 10 and so on.Currrently I have created a formula variable with 'user input' and created a 'condition' to display 'Difference' greater than the user entered value.
However,it is required to have various selection options for setting the threshold of difference.For e.g User should be able to set say 'equal to'/'greater than/less than/not equal to operator for 'difference' in the initial selection screen of the report.
With the current user-input formula variable I am not getting these 'greater than' etc operators.Any ideas on how to achieve this?

Ya know, that's all well and good ... BUT ... WHAT IF you do want to sort text type columns with Greater Than and Less Than operatiors??
SQL does it just Fine ... so WHY does APEX have the limit??? This is an Oracle BUG ... it SHOULD NOT limit the operators ... I realize "they" may be trying to be helpful with proper constraints to field searches ... but ... if SQL can do it, then ... no need for a limit.
EG ...
Show the records where
the "Begin_Year-Wk" data is less than or equal to "2009-09" AND
the "End_Year-Wk" data is greater than or equal to "2009-04"
... to give everything that was running in that 5 week period whether or not it starts within that time frame
I can run this query perfectly fine via SQL ... but not in APEX ... unless I reconvert a lot of strings back to numbers, and for sorting / formatting / explain-to-user purposes, I really don't want them to be numbers.
So ... there's gotta be a hidden tweak for operators somewhere ...

Can a topic title contain angle brackets (greater than / less than)?

Using RoboHelp 8, WebHelp output generated via rhcl and displayed in modified Internet Explorer (IE).
One of my colleagues is creating a topic to describe an application object that has angle brackets (greater than / less than signs) in its screen name. Needless to say, RoboHelp doesn't like those symbols in the topic title, and it hides them and the text between them in the generated topic title. Steps to reproduce: Typed < and > in the Properties dialog; topic's <title> meta tag shows < and > .
Other than replacing the topic title field with static text, is there a way to push these symbols through the Properties dialog or the HTML editor?
It's not world-shatteringly important - the workaround is okay - but I'd like to know how to avoid this problem with other "special" characters, if I can.
Thanks,
Elisa

Willam is correct that you cannot type < or > directly into the HTML code and in pointing out that RoboHelp automatically converts the code when you type that in design view.
However, I think that you are aware of that and it is not the problem you want addressed. You can see that you can type that straight into the Topic Heading but your Topic Headings are not typed in, you are using fields and what you are finding is that if the Topic Title contains the brackets, that works everywhere other than Topic Headings. Is that correct?
If so the cause is linked to what Willam has pointed out but I am sure Adobe could work out a solution. Report it as a bug. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Greater than/less than comparisons

Hello!
Does somebody has any idea why I get this error message ?
Greater than/less than comparisons with character type operands may not be portable ?
friendly regards
erdem

Hi Erdem,
       You can only use the comparison operators with in the Numeric Characters or the parameters with integer Data Types or Decimal Data Types.
For Example,
Data : A type I Value '5',
         B Type I Value '10'.
If A < B.
else.
Thanks.
Reward points If Helpful.

Problem with the operator less than or equal to in a weby query

Hi all.
The universe is a OLAP Universe
When i created a query in webi and put the month in the filter area with the operator less than or equal to like this.
Month (less than or equal to) 2010.01 for example. The all result brings also the all values like 2010.02, 2010.03, etc
What is the problem and how can fix that ?
Thanks

Looks like you are using a less than or equal to with a Sting data type.
I think you should change to your filter to Year <= 2010 And Month <= 1. Hope you have a month and year object in you BeX.
Anil

I have started migration système to transfert from hold Macbook pro to New MacBook air application starter successfully for several hours. But since more than 3 hours I got the message transferring Time zone paramètres with time left less than 1 minute.

Hi
I have started migration système to transfert from hold Macbook pro to New MacBook air
Application starter successfully for several hours.
But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
Any recommendation or suggestion to solve it ?
Many tanks

If it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If you're interested here is an article explaining Setup Assistant tips.
Roger

Interactive Report with PL/SQL Function Source

Is it possible to create interactive report with PL/SQL function source returing a query? If not, has anyone done any work to simulate the interactive reporting feature for a normal report using API?

I haven't tried that before but you could:
1. create a collection from your result set returned by a dynamic query,
2. create a view on that collection,
3. use the view in your interactive report.
The usability of this proposal depends from a question how "dynamic" your query is - does it always have the same number of columns or not.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Interactive Report with Null Columns

I've got a user who wants to export an interactive report, and he needs certain columns to appear on the export for him to fill the data in later (this is an intermediate step, while we work on getting all the data he needs in to the database). I've created the report query, and there are a handful of null/empty columns (to preserve the correct order for the export). When I try to add this query to APEX in an interactive report, I get a "ORA-00001: unique constraint (APEX_040000.WWV_FLOW_WORKSHEET_COLUMNS_UK2) violated" error.
Googling around shows me that this happens because of similarly-named columns, and the solution is to provide aliases to all columns. My report has aliases on all columns, but I still cannot create an interactive report. I've tried changing the null columns to empty strings, as well as enclosing the aliases in double-quotes, but nothing works. I can however use my original query to create a standard report, but due to the export requirement, this isn't ideal.
I was able to create the interactive report with one null column, and then edited the report source to add in the others. This had to be done one at a time, since trying to add multiple null columns at the same time gives the same error again. Unfortunately, when I try and run the page, I get an "ORA-20001: get_dbms_sql_cursor error ORA-00918: column ambiguously defined" error.
My original query:
select customer.customer_name as customer,
       project.name as project_name,
       trunc(project.estimated_end_dt) as due_date,
       project_status.project_status_desc as status,
       null as revenue,
       project.baseline_effort as baseline_hours,
       null as projected_cost,
       null as est_gain_loss,
       project.actual_hours as actual_hours,
       project.estimated_hours as projected_hours,
       null as projected_cost,
       null as projected_gain_loss,
       null as roi
    from project,
         customer
where customer.customer_id = project.customer_id
and project.inactive_ind = 0
and project.customer_id is not null
and project.estimated_end_dt >= :DTP_P50_STARTDT
and project.estimated_end_dt <= :DTP_P50_ENDDT
order by customer.customer_name,
         project.estimated_end_dt;             Can someone tell me a way to create an interactive report with multiple null columns?

Hi shimmoril,
The problem is likely that you have two columns aliased as "projected_cost" (7th column and 11th column).
Hope this helps,
John
If you find this information useful, please mark the post "helpful" or "correct" so that others may benefit as well.*

Interactive Report with union all in the query

I have an interactive report with the following query in the report region:
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries;
This gets translated as listed below during runtime. I am trying to pass a value to both SELECT statements instead of the just the bottom select statement. Is this possible using interactive reports.
select
PROPERTY,
SADDR1,
UPOSTDATE,
SOTHERDATE1,
ACCOUNT,
SDESC,
UREF,
SUSERDEFINED1,
TRANS_NOTES,
SAMOUNT,
DETAIL_NOTES,
"JOURNAL_CONTROL-1000000000" "JOURNAL_CONTROL-1000000000"
from (
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries
) r
where ("PROPERTY" = :APXWS_EXPR_1)
0.14: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="prop1"
Thanks for any help,
Jim

The bottom query is actually the third query, it encompasses the two that are unioned. It is generated by APEX to allow for the search facility - to achieve what you want ignore the larger query, and get your query working in something like SQL developer. Once it's working then put it into APEX, and the search wrapper will be generated.
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
where property = :YOUR_CRITERIA
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries
where property = :YOUR_CRITERIA;
Then you need to think about how you are using the report, if it is linked to from another report, then create a hidden variable and pass it from the parent.
If the report is standalone , then you could create an item , that can be edited and when submitted, re-executes the report based on the criteria entered.
Steve
Hot and bothered in sunny Dubai

Interactive reports with alv

Hi,
i just wanted to know how to create interactive reports with check box and whether we can use av with interactive reports.

hi,
this the code for interactiv ALV
*& Report ZINT_ALV
REPORT zint_alv.
TYPE-POOLS:slis.
TABLES:mara,
       makt,
       mseg.
DATA:BEGIN OF itab OCCURS 0,
      matnr LIKE mara-matnr,
      maktx LIKE makt-maktx,
     END OF itab.
DATA:BEGIN OF itab1 OCCURS 0,
      mblnr LIKE mseg-mblnr,
      menge LIKE mseg-menge,
      meins LIKE mseg-meins,
      werks LIKE mseg-werks,
     END OF itab1.
DATA:BEGIN OF itab2 OCCURS 0,
      mblnr LIKE mseg-mblnr,
      budat LIKE mkpf-budat,
     END OF itab2.
DATA:fcat TYPE slis_t_fieldcat_alv,
     fcat1 TYPE slis_t_fieldcat_alv,
     fcat2 TYPE slis_t_fieldcat_alv,
     eve TYPE slis_t_event,
     eve1 TYPE slis_t_event.
DATA:t_mat LIKE mara-matnr,
     t_doc LIKE mseg-mblnr,
     s_mat LIKE mara-matnr,
     g_repid LIKE sy-repid,
     subtot TYPE slis_t_sortinfo_alv,
     g_subtot LIKE LINE OF subtot.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:mat FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN:END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_fcat USING fcat.
PERFORM build_eve.
START-OF-SELECTION.
PERFORM get_data.
PERFORM dis_data.
*&      Form build_fcat
      text
     -->T_FCAT     text
FORM build_fcat USING t_fcat TYPE slis_t_fieldcat_alv.
DATA:wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-seltext_m = 'Material'.
wa_fcat-input = ' '.
wa_fcat-edit = 'X'.
wa_fcat-input = 'X'.
wa_fcat-key = 'X'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Description'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
ENDFORM.                    "build_fcat
*&      Form build_eve
      text
FORM build_eve.
DATA:t_eve TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type           = 0
   IMPORTING
     et_events             = eve
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "build_eve
*&      Form get_data
      text
FORM get_data.
SELECT maramatnr maktmaktx INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt
ON maramatnr = maktmatnr
WHERE mara~matnr IN mat.
ENDFORM.                    "get_data
*&      Form dis_data
      text
FORM dis_data.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid         "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND'
     i_grid_title                      = 'Interactive ALV'
     it_fieldcat                       = fcat
     it_events                         = eve
    TABLES
      t_outtab                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "dis_data
*&      Form user_command
      text
     -->U_COM      text
FORM user_command USING u_com LIKE sy-ucomm sel_field TYPE slis_selfield.
CLEAR fcat1.
CASE u_com.
    WHEN '&IC1'.
      READ TABLE itab INDEX sel_field-tabindex.
      IF sel_field-fieldname = 'MATNR'.
        IF sy-subrc = 0.
          t_mat = itab-matnr.
          PERFORM build_cat1 USING fcat1.
          PERFORM build_eve1.
          PERFORM get_data1.
          PERFORM dis_data1.
        ENDIF.
      ENDIF.
     SET PARAMETER ID 'MAT' FIELD t_mat.
     CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_command
*&      Form build_fcat1
      text
     -->T_FCAT1    text
FORM build_cat1 USING t_fcat1 TYPE slis_t_fieldcat_alv.
DATA:wa_fcat1 TYPE slis_fieldcat_alv.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MBLNR'.
wa_fcat1-seltext_m = 'Material Doc.'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MENGE'.
wa_fcat1-seltext_m = 'Quantity'.
wa_fcat1-do_sum    = 'X'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MEINS'.
wa_fcat1-seltext_m = 'UOM'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'WERKS'.
wa_fcat1-seltext_m = 'Plant'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
g_subtot-spos = 1.
g_subtot-fieldname = 'MBLNR'.
g_subtot-tabname = 'ITAB1'.
g_subtot-up = 'X'.
g_subtot-group = 'X'.
g_subtot-subtot = 'X'.
g_subtot-expa = 'X'.
APPEND g_subtot TO subtot.
g_subtot-spos = 2.
g_subtot-fieldname = 'MENGE'.
g_subtot-tabname = 'ITAB1'.
g_subtot-up = 'X'.
g_subtot-group = 'X'.
g_subtot-subtot = 'X'.
g_subtot-expa = 'X'.
APPEND g_subtot TO subtot.
ENDFORM.                    "build_fcat1
*&      Form build_eve1
      text
FORM build_eve1.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = eve1
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "build_eve1
*&      Form get_data1
      text
FORM get_data1.
SELECT mblnr menge meins werks FROM mseg
INTO CORRESPONDING FIELDS OF TABLE itab1
WHERE matnr = t_mat.
ENDFORM.                                                    "get_data1
*&      Form dis_data1
      text
FORM dis_data1.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid              "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND1'
     it_fieldcat                       = fcat1
     it_events                         = eve1
     i_save                            = 'A'
     it_sort                            = subtot
    TABLES
      t_outtab                          = itab1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "dis_data1
*&      Form user_command1
      text
     -->U_COM1     text
     -->SEL_FIELD text
FORM user_command1 USING u_com1 LIKE sy-ucomm sel_field TYPE slis_selfield.
CASE u_com1.
    WHEN '&IC1'.
      READ TABLE itab1 INDEX sel_field-tabindex.
      IF sy-subrc = 0.
        t_doc = itab1-mblnr.
        PERFORM build_cat2 USING fcat2.
        PERFORM get_data2.
        PERFORM dis_data2.
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
*&      Form build_cat2
      text
     -->P_FCAT1 text
FORM build_cat2 USING    t_fcat2 TYPE slis_t_fieldcat_alv.
DATA:wa_fcat2 TYPE slis_fieldcat_alv.
wa_fcat2-tabname = 'ITAB2'.
wa_fcat2-fieldname = 'MBLNR'.
wa_fcat2-seltext_m = 'Material Doc.'.
APPEND wa_fcat2 TO t_fcat2.
CLEAR wa_fcat2.
wa_fcat2-tabname = 'ITAB2'.
wa_fcat2-fieldname = 'BUDAT'.
wa_fcat2-seltext_m = 'Material Date'.
APPEND wa_fcat2 TO t_fcat2.
CLEAR wa_fcat2.
ENDFORM.                    " build_cat2
*&      Form get_data2
      text
--> p1        text
<-- p2        text
FORM get_data2 .
SELECT mblnr budat FROM mkpf
    INTO CORRESPONDING FIELDS OF TABLE itab2
    WHERE mblnr = t_doc.
ENDFORM.                                                    " get_data2
*&      Form dis_data2
      text
--> p1        text
<-- p2        text
FORM dis_data2 .
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid              "'ZINT_ALV'
     it_fieldcat                       = fcat2
     i_save                            = 'A'
    TABLES
      t_outtab                          = itab2
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    " dis_data2
reward if useful...

Can i have a sample BSP INTERACTIVE Reports with step by step.

Hi Friends,
Can i have a sample BSP INTERACTIVE Reports with step by step.
Moosa

Hello,
Please find the sample Code below.
FIRST PAGE
Layout Code.
<htmlb:label for="emp" text="Employee id" width="10"/>
      <htmlb:inputField id="emp" value="<%= w_input1%>"/>
      <p>
<htmlb:label for="Employee Details"/>
       <htmlb:button   id = 'get'
                       text = 'Display'
                       on Click = 'OnInput Processing' />   <p>
<h1>Employee Details</h1>
<htmlb:tableView id="Employee"
                 table="<%= ZTABLE%>" <- Give the table name
                 selectionMode = "lineEdit"
                 design="ALTERNATING">
ONINITILIZATION EVENT.
data:
fs_yhtable like line of TABLE.
    select * from yhtable into table ZTABLE.
ONINPUT PROCESSING CODE:
* event handler for checking and processing user input and
* for defining navigation
class cl_htmlb_manager definition load.
case event_id.
when cl_htmlb_manager=>event_id.
data: event type ref to if_htmlb_data,
        fs_yhtable like line of t_yh1205,
        selrow type ref to cl_htmlb_tableview.
event = cl_htmlb_manager=>get_event_ex( request ).
selrow ?= cl_htmlb_manager=>get_data( request = request
                                        name    = 'tableView'
                                        id      = 'Employee' ).
data: tv_data type ref to cl_htmlb_event_tableview,
         t_tab type int4_table.
*        tv_data1 type ref to cl_htmlb_event_tableview.
tv_data = selrow->data.
   t_tab = selrow->selectedrowindextable.
if event is not initial
and event->event_name = 'tableView'.
    w_int = tv_data->rowselection.
    navigation->set_parameter( 'Employee' ).
    navigation->set_parameter( name = 'w_int'
                               value = w_int ).
    navigation->set_parameter( name = 'table'
                               value = table ).
    navigation->goto_page( 'second.htm' ).
endif.
endcase.
SECOND PAGE CODE:
LAYOUT CODE:-
<htmlb:content design="design2003">
<htmlb:page title = "Employee Details">
    <htmlb:form>
<h1>Employee Details</h1>
<htmlb:tableView id="Employee"
                 table="<%= t_yh1205%>"
                 selectionMode = "lineEdit"
                 design="ALTERNATING">
</htmlb:tableView>
    </htmlb:form>
</htmlb:page>
</htmlb:content>
Hope this is helpful.Let me know if you need any more help.
Thanks
kalyan

Interactive Report with specific rows editable

I have an interactive reports, with the edit (pencil) link to a maintenance form. I only want the link to show for specific records in the reports. Can you put a condition in the link column to the pencil for certain records?
If so, how can you access the value of the field? ie. I need to check the value of 'USER_NAME' in the select below against :APP_USER
select A.pk_id as "PK_ID",
A.fk_sis_user as "FK_SIS_USER",
A.list_name as "LIST_NAME",
A.list_description as "LIST_DESCRIPTION",
B.user_name as "USER_NAME",
A.creation_date as "CREATION_DATE"

Not exactly what you are asking for, but it may give you an idea hot to create conditional
icon and link.
From always excellent examples from Denes Kubicek:
http://apex.oracle.com/pls/otn/f?p=31517:23:3086073313243153::NO
HTH
Thomas

Interactive report with pagination

Hi,
i have create an interactive report with pagination .i have follow instraction form
[http://dbswh.webhop.net/apex/f?p=BLOG:READCAT:0::::CATEGORY:10800346812869]
i have put JQuary in Page HTML HEADER .
Now it show me that code in header in my page .No value in my pagination select list.
How can i solve this problem.
Thanks

Hi friends,
i have sort out that problem,
i have jus put JQuary code in JavaScript Section.
Thanks

Numbers '08 "If" with a greater or less than answer

Hi all - I have a cell with a sum D & E28 (merged cell) that I want another cell B30 to display a value based on what is in cell D & E28.
If cell D & E28 is 8 or less I want B30 to say 8. If D & E28 is greater than 8.001 but less than 12 I want B30 to say 12 and if D & E28 is greater than 12.001 but less then 18 I want B30 to say 18
Any ideas?
Thanks
Peter

pdmjr,
=IF(ROUND(D28,3)<=8.001, 8, IF(ROUND(D28,3)<=12.001, 12, IF(ROUND(D28,3)<=18, 18, "Over 18")))
should do it for you.
The nested IF statements handle your logic. The ROUND statements handle internal math errors and your need to break at .001. You didn't say what to do with inputs of 18 or greater, so I suggested a text string for that case.
The form of the IF statement is: If (logical statement) is True, Then do this, Else do this. Your case requires three tests. You could quibble about a value that is, say, 12.0011 and rounds to 12.001, but I doubt you are concerned about that level of detail. If so let me know.
Does this help?
Regards,
Jerry
Message was edited by: Jerrold Green1

Greater Than Less Than

Dear all,
I am Using oracle 10g R2 database on windows.
I have a doubt that,
If I have a 'Date' datatype column suppose a and want to (select Less than sysdate and greater than Sysdate-31(One Month).
e.i.
select a,b,c from T where a Less Than Sysdate-31(One month.);How can i do this.
Thanks,
Chanchal Wankhade.

Shinegar wrote:
I had not considered the effect on an index with TRUNC. Thank you for pointing that out.
TRUNC doesn't actually remove time as you can see below
SELECT TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH:MM:SS AM') "Today's Date and Time" from DUAL;
Today's Date and Time
01/19/2012 12:01:00 AMLet's say sysdate = Jan 19, 2012 11:00:00 AM
As shown above, trunc(sysdate) = Jan 19, 2012 12:01:00 AM
So, trunc(sysdate) -1 = Jan 18, 2012 12:01:00 AM
Removing the trunc from column a
select a,b,c
from T
where a between trunc(sysdate)-1 and trunc(sysdate);will also remove all data that is greater than Jan 19, 2012, 12:01:00 AM so you would only see data from one day -- Jan 18th.
Adding the trunc to column a returns all the data from Jan 18th and 19th.
It is my experience that users will ask for a date range, but then will ask for just one day. If Column a is not truncated, then no rows would be returned when between trunc(sysdate) and trunc(sysdate).
Most programmers will not use trunc(sysdate) in the where clause, but would use a variable with value assigned of sysdate or trunc(sysdate) as it provides more flexibility.
If you do not want to use trunc on column a, then the where clause should be BETWEEN trunc(sysdate) - 31 AND sysdate.
Edited by: Shinegar on Jan 19, 2012 12:40 PMThe trunc function does not remove the time portion, but it does set it to midnight. Or at least i would if you used the correct format mask in your TO_CHAR. The mask for minutes is MI not MM.
SQL> SELECT TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH:MI:SS AM') am_pm,
2 TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH24:MI:SS') mil_time
3 from dual;
AM_PM MIL_TIME
01/19/2012 12:00:00 AM 01/19/2012 00:00:00John

Filtering Interactive Reports with Greater Than Less Than Operators

Similar Messages

Maybe you are looking for