Filtering Tables with Checkboxes?

Hi, does anybody if it's possible to filter a table according to checkbox values and if so how? I have a book wishlist table, and I added a checkbox column called "Bought". I'd like to filter the table according to whether the checkbox is ticked or not, e.g. only bought/not-yet-bought books. Is this possible with Numbers? I tried using "Bought" equals TRUE/FALSE, but it didn't work. Thanks in advance!

I did what I think you said and it worked...
Then, enabling the filter by checking "Show rows that match the following" in the "Sort & Filter" window gives...
Did I miss what you meant? Did you try "Bought" "is" "TRUE" in the "Sort & Filter" window?

Similar Messages

ADF Table with CheckBox - Select/deselect issue

I have seen couple of threads and blogs for ADF table with check box . but none of them exactly matching with my requirement . My Database table does not have any field for check box .
Here is my DB Table
tableA_
A_Id
A_Name
tableB*
B_Id
Requirements :*
1. Display the above tables data with Checkbox . ( if A_Id = B_Id then the checkbox will be checked , else unchecked ) .
2. Select / deselect the check box and save the data . Saving the data , will update only tableB . i,e when a new check box is selected then A_Id value will be inserted to tableB . Similarly , deselecting a checked in data will remove the entry from tableB.
Development :
1. Created a VO where tableB has marked as updateable .
2. Created a transient Boolean variable for checkBox . and modified the getter method of checkbox for returning true/false based on the below condition in the ViewRowImpl Class .
if ( A_Id = B_Id )
return true;
else false ;
3. I have not modified the setter method .
Using the above concept i can view the data with selected checkbox . but the problem is to save the data . because , when I select a checkbox the above coding in the getter method will return false .
Therefore , though i am selecting the checkbox but value of the checkbox has been set as false .
While saving the Data , I am iterating through the VOIterator and observed that a newly selected checkbox value is false . and realized its because of the getter method condition .
Can you please suggest how can I overcome this issue or shall I need to take any other approach ?
Jdev version 11.1.1.5
Regards,
Amitava
Edited by: Amitava on Mar 17, 2012 3:48 PM

You need to go through the ADF page life cycle concepts. In simple words the boolean value in the model is not set while in valueChangeListener. Try adding valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance()); on top in your listener method and see the effect.
Reference:
http://docs.oracle.com/cd/E15051_01/web.1111/b31974/adf_lifecycle.htm

Multi insert on table with checkbox list

Hi all,
I've a problem perhaps it's a small one but I need to do an insert on a table with with the use of a checkbox, however the checkbox retrieves multiple values.
Which I've tried to insert with a loop in the pl/sql block.
How exactly can I do that using bind variables ? Can I get an example, please?
using Apex 4.0
kind regards,
Cleo

Hi,
what are you trying to do ? Are you inserting a line only a checkbox is checked, or are your trying to save the values of a group of checkboxes ?
I got an example for deleting a line with a checked checkbox :
In your process
DECLARE
   va_val APEX_APPLICATION_GLOBAL.vc_arr2;
BEGIN
va_val := APEX_UTIL.string_to_table(:P20_PARAMETRES, ',');
FOR i IN 1..va_val.count LOOP
    DELETE MY_TABLE WHERE ID = va_val(i);
END LOOP;
:P20_PARAMETRES := '';
END;In your page header (javascript)
function delete(){
   if(confirm('Do you really want to delete the checked options ?')){
   var param = document.getElementById('P20_PARAMETRES');
   var root = 'f20_';
   var i = 1;
   var id;
   do{
     id = root + i;
     obj = document.getElementById(id);
     if((obj != undefined) && (obj != null)){
        if(obj.checked == true){
           if (param.value == ''){
             param.value = obj.value;
           } else {
             param.value = param.value + ',' + obj.value;
   i++;
   }while((document.getElementById(id) != undefined) && (document.getElementById(id) != null));
doSubmit('BTN_DELETE');
}In your report your column must be something like this:
apex_item.checkbox (20,
                           a.id,
                           NULL,
                           NULL,
                           'f20_' || '#ROWNUM#'
                          ) delete_checkboxThat way I delete only those who has been checked. You can do that or try
FOR i in 1..APEX_APPLICATION.G_F01.COUNT LOOP
END LOOP;But I'm not sure how you notice those who are checked or not that way.. If I remember clearly, it only store those who are checked...
Edited by: leinadjan on Sep 21, 2011 2:45 PM
Edited by: leinadjan on Sep 21, 2011 3:37 PM

Christmas Tree Table with checkboxes

I am using the JTable (CTTable, CTTableCellRenderer, and VisibleTableModelEvent) found at http://java.sun.com/products/jfc/tsc/articles/ChristmasTree/.
The problem that I am having is that I inserted a column with checkboxes. In that column, it shows the text value (true/false) instead of the checkbox. When I click on a cell in the column, it shows the checkbox while the mouse button is depressed. After clicking on the cell, the checkbox disappears and the value changes (example: if it was false before clicking, it becomes true after clicking).
Also, I have tried using my table with the standard JTable class and the checkboxes work correctly.

Thanks Frank.
You are correct I am setting the Bind variable via client method dropped as default activity in TF.
I tried to utilize ensureVariableManager method in VOImpl and setting the Variable Value but when I try accessing the value of bind variable via get<BindVariableName>
I end up in stackOverFlow error.
Then I tried to override execute query by putting this lines before super.executeQuery();
ensureVariableManager().setVariableValue("BindVariableName", value);
but I guess this is not setting the Bind Variable too..
What am I doing wrong ?
Amit

Table with checkbox

Hi Experts,
             I have one table and 4 column. i need
              1. one check box for selection
              2. if i click the check box entire row will be selected.
         how to give checkbox?
         its very urgent?
Regards,
P.Manivannan.

Hi Manivannan,
Is your scenario like this?
You have a table with 4 columns
Near to the table , you need a checkbox, for selecting entire   rows of the table
In your View Context   add 1 value attribute, say 'checkVar' of type boolean.
Then in your view layout insert a check box.
Then go to the properties of checkbox.
select the property 'checked' , bind it to your boolean attribute 'checkVar'.
Then in checkbox's properties itself , select the event 'onToggle'.
create an action for this.
In that action write the coding
     boolean chk=wdContext.currentContextElement().getCheckVar();
         if(chk)
              for(int i=0;i<wdContext.node<youtTableValueNode>().size();i++)
                    wdContext.node<youtTableValueNode>().setSelected(i,true);
         else
               wdContext.node<youtTableValueNode>().clearSelection();
Also note : set the table's property 'selection mode' to 'multi'

ADF Faces table with checkboxes

Hi,
My dev env: jdev 11.1.1.2.0
I like to implement something like yahoo mail, with a checkbox at the column header. If selected,
all rows will be selected. I assume Yahoo's email is using javascript. How do I achieve the same
thing here with adf faces table? Is there any tutorial I could reference.
Thanks in advance!
Edited by: user1145549 on Jul 13, 2010 8:18 AM

Hi,
U can also check this too.... it very simple approach to Implement Check box
http://theo.vanarem.nl/2010/07/07/adf-checkbox-representing-a-yes-or-no-value/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+orana+(OraNA)&utm_content=Netvibes
Regards,
Suganth.G

Horizontal table with checkboxes

Hi,
I need to create a horizontal table. With this i mean the column aren't on top but on the left side and the data goed from top to bottom. You often see this construction to make it easy for user to compare values. I also need to display in the last row for every column a checkbox.....as to select that data column
Something like this:
              | X | Y |
name     |    |    |
descr     |    |    |
              | 0 | 0 |
I managed to create the table dynamically but i cant seem to find a way to a the checkboxes because the go by column and not by row. I tried adding them in a seperate container underneath but i can't seem to get hold of the column widths at runtime.
Another possibility which i thought maybe would work, is not to work with a table but to simulate this and just create it with a container with Gridlayout and filling it like a grid. Dont know if this woulr workd though...
Any thoughts or idea's?
Much thanks & regards,
Hugo

Hi Hugo,
This is the complete code for achiving a simple sceanrio where you would have
both checkBox and textview in the same column.
if(firstTime)
         int elementIndex =0;
         IWDTable table = (IWDTable)view.getElement("Table");
         for(int i=0;i<wdContext.nodeTableNode().size();i++){
         IWDTableColumn tableColumn = (IWDTableColumn)view.createElement(IWDTableColumn.class,"tableCol"+elementIndex+i);
          elementIndex++;
         Iterator iterator = wdContext.nodeTableNode().getNodeInfo().iterateAttributes();
         while(iterator.hasNext()){
               IWDAttributeInfo attInfo = (IWDAttributeInfo)iterator.next();
               IPrivateAView.ITableNodeElement tableNodeElement = wdContext.nodeTableNode().getTableNodeElementAt(i);
               IWDTableStandardCell stanCell = (IWDTableStandardCell)view.createElement(IWDTableStandardCell.class,"standardCell"+elementIndex);
               elementIndex++;
              if(attInfo.getDataType().getLocalName().equalsIgnoreCase("string")){
                    IWDTextView textView = (IWDTextView)view.createElement(IWDTextView.class,"textView"+elementIndex);
                    textView.bindText(attInfo);
                    textView.setVisible(WDVisibility.VISIBLE);
                    elementIndex++;
                    stanCell.setEditor(textView);
                    stanCell.setVariantKey(elementIndex+ "String");
              else{
                    IWDCheckBox checkBox = (IWDCheckBox)view.createElement(IWDCheckBox.class,"checkBox"+elementIndex);
                    checkBox.bindChecked(attInfo);
                    checkBox.setVisible(WDVisibility.VISIBLE);
                    elementIndex++;
                    stanCell.setEditor(checkBox);
                    stanCell.setVariantKey(elementIndex+ "Boolean");
               tableColumn.addCellVariant(stanCell);
               tableColumn.setVisible(WDVisibility.VISIBLE);
               table.addColumn(tableColumn);
         table.bindDataSource(wdContext.nodeTableNode().getNodeInfo());
Regarding the the data source in this case you can create a node i.e table Node with least an attribute of type String and another of type boolean.Create and add
node elements in wdDoInit() for the same.
Regards
Amit

Filtering table on checkbox state

Hello Everyone,
I'd like to achieve a quite simple goal: to filter a table on a column that contains checkboxes. Three options would be to show checked, unchecked or all. Using the standard table handler (IF_WD_TABLE_METHOD_HNDL) the behavior is not surprisingly the following:filtering checked entries ('X') works fine, but filtering unchecked entries (' ') will show all entries as the filter criteria has initial value which is being interpreted as there is no filter criteria.
There must be a very simple solution for this. All ideas are welcome.
Thanks, regards,
Peter

Unfortunately - no simple solution.
But given that you are given the on_Filter event you can code one yourself...
sorry - but the standard implementation of IF_WD_TABLE_METHOD_HNDL~APPLY_FILTER doesn't allow you much wriggle room here - it retrieves the value of the filter and compares to "INITIAL" as you mentioned.
Can only suggest a custom implementation of your own filter method - you can't really override the attribute that is filtered easily - retrieved using CL_WD_ABSTRACT_TOGGLE->GET__PRIMARY_PROPERTY_BINDING for checkboxes - would be nice to redirect this to an alternate binding but that would cause other problems...
Would be interested if anyone else has already done this!
Chris

Default select rows in table with checkbox

I want to display a datatable that has checkboxes in one of it s columns to select a row. How can I programatically select some checkboxes in the table when the page renders for the first time...
I tried the following below but was able to only get the row highlighted...is there a way to mark the checkbox as selected for that row ?
public void prerender() {
RowKey[] RK = this.objectArrayDataProvider1.getAllRows();
for (int i= 0; i< RK .length; i++ ){
this.getSessionBean1().getTablePhaseListener().setSelected(RK, new Boolean(true));
//THE ABOVE ROW ONLY HIGHLIGHTS THE ROW AND DOEs NOT MARK THE CHECKBOX AS SELECTED.
Thanks in advance for any help.
- Lakshmi

Hi,
For items created using APEX_ITEM.HIDDEN(), null values are ok
As far as I can see, there is nothing wrong with the SQL statement. I have just set up a test page [http://apex.oracle.com/pls/otn/f?p=267:189] using the following SQL:
select APEX_ITEM.CHECKBOX(1,EMPNO) " "
      , APEX_ITEM.HIDDEN(2, JOB) || ENAME "JOB_ENAME"
      , APEX_ITEM.HIDDEN(3, DEPTNO) || NVL(SAL,0) "DEPTNO_SAL"
from EMPI don't have your tables, so have used EMP instead, but the structure of the code is the same.
If you click the Submit button, you will see the submitted data shown next to F01, F02 and F03 at the top. Some of the EMP records do not have JOB values, so you will see that the F02 contains empty values for these - but F02 and F03 contain the same number of values (empty or not). F01 will only contain a value if the checkbox has been ticked.
Andy

Problem with checkbox group in row popin of table.

In table row popin I have kept Check Box Group.I have mapped the texts property of checkbox group to the attribute which is under the subnode of the table.the subnode properties singleton=false,selectioncardinality=0-n,and cardinality=0-n.
if there are 'n' number of records in the table.each record will have its own row popin and in the row popin there is check box group.
the check box group in the row popin belongs to that perticular row.
but the checkboxegroup values in row popins of all the rows are getting changed to the row which is lead selected.
The same scenario (table in the row popin is showing the values corresponding to its perticular row and all the table values in popin are not getting changed to the one lead selected in the main table)is working fine with the table in place of checkbox group in row popin with datasource property of table binded to the subnode
I cant trace out the problem with checkbox group in place of table.
Please help me in this regard.I have to place check box group in place of table in row popin.
Thanks and Regards
Kiran Kumar K

I have done the same thing successfully with normal check box ui element. Try using check box in your tabel cell editor instead of check box group.

Problem with checkbox on table component

Hello i am having a problem with checkbox in table component
i am developing something like a shopping cart app and i have a checkbox in my table component , i want users to select items from the checkbox to add to thier cart, They can select the items from cartegory combobox , my problem is when they select the items from the checkbox if they select another category the alread selected once do not display in my collection opbject please how can i maintain the state of the already selected items in my collection object

Hi,
Please go through the tutorial "Understanding scope and managed beans". This is available at:
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/scopes.html
The details of the selected items need to be stored in an object that is in session scope.
Hope this helps
Cheers
Girish

How to work with checkbox in a table

hi im working with a table than shows SQL result and i put a column with checkboxes in the table
how can i handle the rows with the checkbox in true ? i want to do it with a button
thanks

Here are more resources. By the way, I don't understand what you mean by "how can i handle the rows with the checkbox in true ? i want to do it with a button "
http://blogs.sun.com/roller/page/divas?entry=using_checkboxes_in_a_table
http://blogs.sun.com/roller/page/divas?entry=table_component_sample_project

Bug in ADF(10.1.3.2.0) with checkboxes in a table in a pop-up

So I've found a bug in ADF. The bug manifests when I have a dialog window pop-up with a table with many rows(13 or more). Each row has a checkbox in it. If I change the state of 12 or fewer of the checkboxes and click ok, the returnListener will fire. If I change 13 or more checkboxes, the return listener does not fire.
I'll try to create a test case/demo for this. Has anyone else encountered this?

Hi,
I haven't seen this problem, but I normally use a JSF HTML boolean checkbox for ADF editable tables.
<h:selectBooleanCheckbox value="#{row.Enabled}"/>I found that the <af:selectBooleanCheckbox> readonly attribute did not evaluate its EL so I stuck with the JSF component since. You could try this component as a workaround.
Brenden

Multiple row selection in ADF Table using addition column with checkbox

I am using ADF table(Jdeveloper11g) and i want to selecte multiple rows it may be more than one OR all rows.
For that i added one Column to the table with Header Delete and checkbox
<af:table....
<af:column sortProperty="Delete" headerText="Delete" width="100"
sortable="false">
<af:selectBooleanCheckbox label="#{row.favoriteId}"
valueChangeListener="#{Mybean.onCheck}"
id="checkbox" autoSubmit="true">
</af:selectBooleanCheckbox>
</af:column>
</af:table>
backing bean:Here i added code to get Value of one column with id favoriteId and use an arrayList(listForDelete) to monitor the state of the checkboxes
public void onCheck(ValueChangeEvent valueChangeEvent) {
BindingContainer bindings = getBindings();
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding iterBind =
(DCIteratorBinding)bindings.get("getUserFavoritesByUserIDIterator");
if (iterBind != null && iterBind.getCurrentRow() != null) {
RichSelectBooleanCheckbox ch = (RichSelectBooleanCheckbox)valueChangeEvent.getSource();
if (!ch.isSelected()) {
Long issueId = (Long)iterBind.getCurrentRow().getAttribute("favoriteId");
listForDelete.add(issueId);
else
Long issueId = (Long)iterBind.getCurrentRow().getAttribute("favoriteId");
listForDelete.remove(issueId);
Problem is that when i select single row checkBox, onCheck() method of backing bean gets called multiple times(equals to the number of rows)
I think this is beacuse of <af:selectBooleanCheckbox id is same that is "checkbox" but i am not sure.Even i tried to assign some unique id but no any success in assigning Id with value Expression.
I also find related post
Re: ADF Table Multiple row selection by Managed Bean
but that is related to Select All rows or Deselect all rows from table.
From the simillar post i follow the steps given by Frank.but problem with below step
->have an af:clientAttribute assigned to the checkbox with the following EL #{row.key} ,here I added <af:clientAttribute name="#{row.key}"></af:clientAttribute> and i am getting error
Error(64,37): Static attribute must be a String literal, its illegal to specify an expression.
Please let me know if any one had already implemented same test case.
Thanks for all help
Jaydeep
Edited by: JaydeepJ on Aug 7, 2009 4:42 AM

just to update after the rollback is called in the cancel button i wrote following code which does not change the row focus to the first row
DCBindingContainer bc =
(DCBindingContainer)BindingUtils.getBindingContext().getCurrentBindingsEntry();
DCIteratorBinding profItr =
bc.findIteratorBinding("ProfileSearchInstIterator");
Row cRow = profItr.getRowAtRangeIndex(0);
if(cRow != null){
System.out.println("Current row is not null so fixed ");
profItr.setCurrentRowIndexInRange(0);
RowKeySetImpl rks = new RowKeySetImpl();
ArrayList keyList = new ArrayList();
keyList.add(cRow.getKey());
rks.add(keyList);
profileTable.setSelectedRowKeys(rks);
AdfFacesContext.getCurrentInstance().addPartialTarget(profileTable);
}

Filtering a table with 19699 rows

Hello
I am new to Xcelsisu and I am trying to aply filter component to a table with 19699 rows. I is suppose to show in the filter 45 diferent clasifications. I seems to be using only the first 500 rows to aply the filter. I changed the maximum number of rows in the preferences. What should i do ?

a component cannot handle 20.000 rows you should filter these in the database by using quries when getting the data in the dashboard. If there is no database connection available, you can use pivot tables to create list for the different dimensions and then use lookup formulas like match and index o display the data for your chart.

Filtering Tables with Checkboxes?

Similar Messages

Maybe you are looking for