Filters are not working on resulting image smaller than 8191x2048

I have created AIR application using SDK 3.5 over the Flash Builder 4, and I am targeting AIR player 1.5.3. I have large text where user can apply outline. And to apply outline I am using Glow Filter, but somehow it is not working for texts which are too large but smaller than required size which is 8191x2048.
I am wondering why it is not working even if it is mentioned in Adobe Official site.
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filters/GlowFilte r.html
"A filter is not applied if the resulting image exceeds the maximum dimensions.  In  AIR 1.5 and Flash Player 10, the maximum is 8,191 pixels in width or height,   and the total number of pixels cannot exceed 16,777,215 pixels. (So, if an image is 8,191 pixels   wide, it can only be 2,048 pixels high.) In Flash Player 9 and earlier and AIR 1.1 and earlier,   the limitation is 2,880 pixels in height and 2,880 pixels in width.  For example, if you zoom in on a large movie clip with a filter applied, the filter is   turned off if the resulting image exceeds the maximum dimensions."
If I remove the glow filter then it works.
Can any one suggest/advice, how the filter limit is not extended even if I am using proper SDK and AIR player.
Any help will be highly appriciated.
Thanks,

I have set -target-player=10.0.0 in the command line argument in the Flex compiler setting but still we are facing same issue for the not generating full text more than 4000px if we have applied Glow filters on the Text but if we removed the Glow filters from the text. Full text is displayed.
Our text dimention is : 1850x7200(with glow filters), This is below the 16,777,215 limits of Bitmap text. But still we can't generate the Full text.
Regards,

Similar Messages

  • CC 2014 nik efex - My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect.  The separate menu panel does not appear either

    My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect.  The separate menu panel does not appear either.  Help with this?

    BINGO !!!!
    Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
    All the video tests passed with flying colors.
    The sniffer rename trick fixed the problem.
    Thank goodness for the internet!

  • I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

    I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

    I have the same issue on my iPhone 5s
    I've closed the app and re-booted the phone several times but it did not resolve the issue.
    Upgrading to iOS 8.0.2 did not resolve it either.
    Erasing the iPhone and restoring from a backup did not resolve it.
    I'm not sure what else to do.

  • I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Wil

    I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Will this resolve my issue?

    any advise..?

  • Quartz filters are not working (for PDF)

    It seems that quartz filters are not working for me under Mountin Lion. I have tried to export, print, etc everything in Preview, Automator, ColorSync. It simply won't apply the filters to my PDFs.
    Anyone experienced similar issues? Is it a known bug?

    I kinda have the same problem, except its only my custom filters that aren´t working in ColorSynch. The other filters get applied as usual, but I can not change any of the preformed filters within ColorSynch, and the "live update from filter inspector" doesn´t work if I try to apply changes or use my custom filters.
    The custom filters I have, were created prior to my upgrade from snow leopard to moutain lion.
    I´ve understood that there has been multiple problems with the filters in lion ++
    If there isn´t a quick fix to this, does anybody know of any programs I can use to apply filters without having to buy Adobe Pro, my use is not for simply decreasing file size, but mostly for editing colors prior to prinitng. And its  not sufficient to use the preformed filters unfortunately.

  • Filters are not working in Bex report

    Hi All,
    I got a strange issue in my project.
    There is a report in Bex analyzer, after got the report result user trying to put filter on one navigational attribute, unfortunaltely filter is not working.
    For example:
    User ran the report and got the output, now user tried to filter on country with the value"India", but the report showing all the countries in the result.
    What could be the problem, I have checked all the settings.
    I did not get any clue. Could you please throw some light and help me.
    Thanks & Regards,
    Venkat

    Hi Rama,
    I mean, it is working fine in listcube and variable screen, but it is not working while filtering data in report output.
    Please advice me how to solve this.
    Thanks & Regards,
    Venkat

  • My photoshop filters are not working

    why my all filters are gray out?

    I have run every version from 2 to 30 and the message filters have not been an issue in any of them. Perhaps if you restart from the help menu (Alt+H) > restart with add-ons disabled and see if an add-on is causing your issue.

  • When the newest update to 24.3.0 was installed, I received duplicate messages and all of my message filters are not working properly. How to fix easily?

    24.3.0 caused errors in my message filters. Error messages occur when getting new mail that has a filter. Not sure why this happened, but would like an easy fix instead of deleting all and creating new filters. Tried edit option, but to no avail. Was going to try clearing log, but I'm just guessing. Can anyone help me out with this? Thanks.

    I have run every version from 2 to 30 and the message filters have not been an issue in any of them. Perhaps if you restart from the help menu (Alt+H) > restart with add-ons disabled and see if an add-on is causing your issue.

  • Filters Are Not Working in Photoshop CC 2014

    Mac Book Pro 13" Retina OS 10.9.3
    I recently downloaded and installed Photoshop CC 2014 as part of my Creative Cloud License. When I attempt to use any Filter in the Filter Gallery (Blur, Distort, Noise, etc.) The window pops up showing the filter, it shows the preview affect. However, when I click OK, the filter is not applied. I have tried it on a raw file, a jpeg file, on an 8 bit and 16 bit file.
    When I go through the same steps with Photoshop CC it works fine.
    I appreciate any suggestions. I can continue to use Photoshop CC; however, when I am in Lightroom and select 'edit in' it launches Photoshop CC 2014 and I cannot figure out how to change it to launch Photoshop CC instead.

    Could you please post a screenshot to illustrate the issue?
    Maybe you should go through the usual trouble-shooting routines:
    Photoshop: Basic Troubleshooting steps to fix most issues

  • HT1665 what can i do my ear phones are not working,they are  less than 04 months?

    what can i do my ear phone are not working,the phone is less than 04 months and its was bought in makro springfield durban kzn south africa

    The ear phones carry the same warranty as the iPhone.  They're still in warranty.  Bring them in to Apple for evaluation and if they are deemed defective they will be replaced free of charge.

  • Since I refreshed Firefox 36.0.4, "Save page as" and "save image as" are not working (even in Safe mode)

    I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
    In Safe Mode, same problem.
    I serached past forum discussions and found several occurrences, but no convincing response.

    ''afew2 [[#question-1054433|said]]''
    <blockquote>
    I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
    In Safe Mode, same problem.
    I serached past forum discussions and found several occurrences, but no convincing response.
    </blockquote>
    I tried troubleshooting plugins, none appeared to be causing the problem.
    I installed 36.0.1, but no difference. Went back to 36.0.4, still no change.
    I ran a malware check with Malwarebytes, no change.
    A past thread here suggested deleting localstore.rdf, which I tried, no result.
    People have had this problem in the past. No one has any idea of how to fix it?

  • After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

    After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

    Have you run it in a debugger? That will show you exactly what is happening and why.

  • The speaker of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

    the speakers of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

    Hi talero,
    Contact AppleCare or bring it into an Apple Store or AASP.

  • ** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

    Hi Friends,
    We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY. 
    We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
    lw_fieldcat-lzero = space.
    lw_fieldcat-no_zero = 'X'.
    After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
    1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
    Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
    Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
    Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
    2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
    We are using SAP ECC 6.0.
    Friends, can you clarify the about doubts. It is surprising for me.
    Kind regards,
    Jegathees P.
    Our customer is asked to remove the leading zeros for the numeric field

    Hi Clemens Li
    I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
    Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
    Hi Abhii
    I have given below the fieldcat coding.
    Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
        wls_fieldcat-col_pos   = wpv_pos.
        wls_fieldcat-fieldname = wpv_champ.
        wls_fieldcat-tabname   = wlc_tabname.
      wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
        wls_fieldcat-seltext_l = wpv_libelle.
        wls_fieldcat-ddictxt   = 'L'.
        wls_fieldcat-no_out    = wv_no_out.
        APPEND wls_fieldcat TO gt_fieldcat.
    Kind regards,
    Jegathees P.

  • Keyboard and trackpad are not working, Keyboard and trackpad are not working

    I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Maybe you are looking for

  • Race conditions - can you actually lose the data in memory?

    I've seen posts where a race condition can actually destroy the contents of a global memory. I understand about not getting the right information if your read just beats your write, but can it actually lose the data altogether? This would mean you ha

  • Why not 2880 Limit?

    Does anyone know if there are plans to remove the 2880 image dimension limit in a future version of Flash? I understant the need to limit memory consumption, but why not limit the total image size (in memory) instead of the size in a particular dimen

  • How to trigger a BPM

    Hello, I would like to create a web service, that triggers a BPM. This BPM should copy files from one server to another. Is this trigger step a receiver step in BPM?? Does anyone got an example/webblog?? Can I copy more than one file?? I have to give

  • CS5 - Naming Titles

    In CS4 I would create a Title, making it look the way I wanted... then Open said title and hit "New Title Based on Current Title", changing the wording to whatever I needed it to be. -This helps to keep the formatting, color, etc. of my titles cohesi

  • Adobe Animate and DPS

    Hey guys, Heres my little problem; I have two objects animated in Animate, when I load 1 into DPS, it plays fine but when I put two (which i need), only one plays, whichever gets touched first and the other one freezes and doesnt do anything. here is