I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Wil
I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Will this resolve my issue?
any advise..?
Similar Messages
-
I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.
I have the same issue on my iPhone 5s
I've closed the app and re-booted the phone several times but it did not resolve the issue.
Upgrading to iOS 8.0.2 did not resolve it either.
Erasing the iPhone and restoring from a backup did not resolve it.
I'm not sure what else to do. -
I need to move my photos and contacts from my old iPhone 3 to my new iPhone 4. When I open iTunes, it is not letting me sync my old phone so I can back up to my new phone. Any thoughts?
Buy a Mac OS X 10.6 DVD from the online Apple Store, install it, and run Software Update twice.
(96978) -
I have a new iPhone 5 version 8.1 - incoming caller ID does not work and I cannot send or receive SMS messages. ISP says everything is active on their side. I have just upgraded from Samsung with the same phone number and services. Help?
Hi cggturner,
I'm sorry to hear you are having issues with iOS 8.1. If you are still having issues with Caller ID and SMS Messaging, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Messages
Regards,
- Brendnen -
Both my cameras are not working I took it in and they reset the phone and it still continued to happen what can I do?
If a Restore of iPhone with iTunes on computer does not get it working correctly. Then it is hardware problem. Apple with handle this with Replacement iPhone 4S exactly same as yours for $199. If there is any hope at fixing this otherwise, first step would be to replace the front (facetime camera) first. See if both cameras function after this. If not, if there is any fix possible it will be very difficult. Replacement iPhone may be best plan.
-
After updating my ipad 2 to iOS 7.0.4 , front and back camera is not working it gives like very small dots or dash. I did restore from iTunes and reset by holding on the home and sleep button, I also tried to close the app from the task bar but still all trials didn't solve the problem.
I haven't heard of this before so I doubt it's a bug. Probably something happened during the 7.04 download.
Backup your iPhone to iTunes and restore it as a new iphone, then restore from the backup. This will give you a fresh copy of iOS 7.04. -
Crtl+C, Ctrl+V, Ctrl+X, Tab, and arrow keys do not work at all in FF4.0b13 and later. I am not sure about earlier versions as this is the first version I have tried.
I found this helpful article (http://support.apple.com/kb/TS1381) and worked my way through the section "Some keys don't work as expected".
All the following functions/settings are disabled or turned off:
Text to speech / Speak selected text when the key is pressed
Slow Keys
Mouse Keys.
The keyboard viewer just confirms my list of keys that are not working.
Starting in safe mode makes no difference; nor does booting from the Mac OS X Install Disc and running Terminal from the Utilities menu. The same keys as before fail to work.
This seems to confirm that it's a hardware issue. Anyone have any suggestions? -
Touch Pad and Web Cam are not working after installing drivers also
Hiii
Synaptic Touch pad drivers are not working like not detecting the hardware so please help me on this
and
Webcam is not working like its not detecting even after installing cyberlink software given in the hp web site
please help me regarding this problems1.Download hp support assistant.
2.Run it and go to the tab updates and tune-ups.
3.Click in the button check for updates. It will find you the updates.
4.Click in the button Download and Install.
5.When it finish restart your computer.
[link:http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl...
Also if it doesnt' work , you can also try :
1.Right click to the computer.
2.Click to the manage option.
3.Then select the device manager.
4.After that go to imagine devices and select your camera, then right click on it and select the option update the driver software do the same in the touchpad.
If and this doesn' t work unistall the drivers and install them again. -
I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
ThanksAssuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD. -
I have an iPad 2 with most recent update 8.1.3. I have been experiencing connection problems, wifi dropping all the time. I get the prompts to enter passwords for iCloud and i Tunes all the time. I finally synched my Apple ID with my iTunes ID but the iCloud is still connected to an old email. I cannot figure out how to delete it as iCloud is not accepting the password I am using. I go round and round with changing passwords, etc. What am I doing wrong? How can I sync everything?
Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H. -
MY back camera and flash stopped working it just stopped out of nowhere I reset everything and it still does not work what do I do it's an iphone 5c
Backup and then restore as new and see if it works or not.
-
The keyboard and track pad on my macbook are not working at all!!
I have a macbook , The problem is that the keyboard and the trackpad isn't working at all but the laptop is runnig fine and i can use external USB keyboard
Any help .... :@Hey Stu,
Same here. First I was under iOS 8.0.0, brand new 6 plus. Reminders had the same problem: I can't add any task and can't add a new page, can't change the name of the blank page I have in front of me, my reminders are not synced with the computer.
The only thing I can do is clic on the alarm icon (half-hidden) and when I do it's also blank and I can't add anything, Siri can't either.
I tried updating to iOS 8.0.2, I tried turning on off the phone, turing on/off the sync with iCloud, restarting the app... Nothing worked.
I added a screen shot of both the only screens I can see (in french, but "Nouvelle liste" means "New list" and "Programmé" means "Scheduled" so you should recognise the screens). -
SPA962 and 2 SPA932 - Last 5 lights are not working
I have a Linksys SPA962 with 2 SPA932. They have 64 extensions configured as BLF and retrieve status from an Asterisk PBX.
All first 59 lamps work OK, but the last 5 don't. They stay flashing in yellow and never show the extension status. If I remove some BLF from SPA932 configuration, everything works fine. After doing some tests, I figured out that SUBSCRIBE packets never came out the Linksys phone (achieve this by capturing all network traffic). So, it might not be an Asterisk configuration issue. Also tried upgrading and downgrading firmware versions, now I have the last one installed.
It seems as if the telephone has a limitation in the number of BLFs. Does anyone experienced something similar?
Hope we can solve it ASAP.
Best,
Facundo.I have the same problem with exactly the that configuration. It's not always the last 5 subscriptions that fail, but always between 3 and 6. I used Wireshark to check packets sent to the Asterisk PBX and you're right, subscription packets don't seem to get to the network. If I delete 6 BLFs (doesn't mater which ones) the rest works fine. Seems like a buffer overflow ....
-
When printing to a laser device my Acrobat Pro XI all of a sudden was not shrinking oversized pages to fit on paper. The Fit and Shrink to page options did not work. Could still output file reduced by using the percentage box but wondered if anyone else has encountered this problem before? Reinstalled Acrobat but problem still there.
I suddenly have started having this same problem. Anyone have an answer?
-
When I use it on the speaker it's fine. But when I answer or make a call it's so quiet and you can barely hear!!! Frustrating
Number one - that person has given you false information...the Apple store genius bar supports all Apple products whether in or out of warranty. Checking is free, service on an out of warranty item is not free.
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Since you show that you have iOS 7.0.3 you might want to update that iOS to 7.0.4...plug the iPhone in so you are on a solid power source, then while on a WiFi go to Settings > General > Software Update and update to 7.0.4.
Maybe you are looking for
-
SOAP, Web Service Interaction using Flex 2
A Web Service exists on the local computer. It is a .NET Framework web service (SOAP) running under IIS. It commences with a demand for three parameters. One fills in the form and presses a button on the form and is returned an XML file with vital da
-
Opening an Image in Photoshop on Another Machine
I have a weird workflow issue. I'd like to be able to send a file so that it opened in Photoshop on another machine and then, when saved, would be returned to the Aperture database. I figured out a way to open the file remotely using smart folders an
-
Is there a way to extract highlighted text from preview
Hi I'm new to the community but would like to know if there is a way to extract all of the text I have highlighted in a pdf viewed in preview? Basically a quick versioin of cutting and pasting multiple highlighted items at once.
-
The "basic" panel in LR4 "develop" simply disappeared. How do I get it back?
The "basic" panel in LR4 "develop" simply disappeared. How do I get it back?
-
i have a question how to fetch the 4th row directly instead of starting from the frist row. see my table is having 30 records i have written a cursor that will fetches 10 rows based on the condition . k . now i want the 4 th row direclty. i tried wit