FIM and BPC Integration error

Hi Experts,
I was trying to upload data to BPC through FIM using Flat file.
I created the Job and did all the mapping but whenever I ran the job I get the below error.
"com.sap.fpm.fim.common.webservice.WSException: The job launch for job 'Trial' failed with error 'Web Services sent the request to start batch job 'Trial' on server 'null'. The Job Server refused the request with error: Job Server not found'"
Please help.
We have BPC and FIM in same server and have FIM users added as BPC users as well.
We have other SAP sources so using FIM to load data to BPC.
Regards
Raman

Hi Raman
You need to configure the Data Services Job Server, is the Job Server running?
Check the following link for some troubleshooting tips.
[Job server is not working;
Hope this helps
Kind Regards
Daniel

Similar Messages

OIM and OIA11g Integration(error while importing Resource metadata into OIA

Hi,
I followed the below link and trying to integrate OIM 11.1.1.5 and OIA 11.1.1.3.6
And both are deployed different weblogic domains..
http://wikis.sun.com/display/OIA11gDocs/Integrating+With+Oracle+Identity+Manager,+Preferred+Method
I am getting error in Step 6: Import the Oracle Identity Manager (OIM) Data Into Oracle Identity Analytics (OIA) -> To Import Resource Metadata
10:56:21,484 DEBUG [DBIAMSolution] publishing import starting event...
10:56:21,623 DEBUG [OimUtilityFactory] ************** OIM Connection Params *************
10:56:21,628 DEBUG [OimUtilityFactory] XL Home ---> C:\Oracle\Middleware\Oracle_IDM1
10:56:21,630 DEBUG [OimUtilityFactory] login config ---> C:\Oracle\Middleware\Oracle_IDM1\server\config\authwl.conf
10:56:21,631 DEBUG [OimUtilityFactory] ****************************************************
10:56:21,636 DEBUG [OimUtilityFactory] Xellerate Discovery Settings {}
10:56:21,638 DEBUG [OimUtilityFactory] ********** Connecting to OIM Server **********
10:56:21,774 ERROR [IamDbNamespaceImporterHelperImpl] Error connecting to OIM
Thor.API.Exceptions.tcAPIException: javax.security.auth.login.LoginException: java.lang.SecurityException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied
     at Thor.API.tcUtilityFactory.<init>(tcUtilityFactory.java:166)
     at com.vaau.rbacx.iam.util.oracle.oimapi.OimUtilityFactory.getUtilityFactory(OimUtilityFactory.java:67)
     at com.vaau.rbacx.iam.db.helpers.IamDbNamespaceImporterHelperImpl.readNamespaces(IamDbNamespaceImporterHelperImpl.java:87)
     at com.vaau.rbacx.iam.db.DBIAMSolution.readResourceMetadata(DBIAMSolution.java:642)
     at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importResourceMetadata(RbacxIAMServiceImpl.java:472)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy274.importResourceMetadata(Unknown Source)
     at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:107)
     at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
10:56:21,784 ERROR [DBIAMSolution] Error Importing Namespaces : javax.security.auth.login.LoginException: java.lang.SecurityException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied
10:56:21,836 DEBUG [DBIAMSolution] publishing import completed event...
10:56:21,903 INFO [VaauSchedulerEventListenerImpl] Job executed: oim tst, IAM
10:56:21,904 INFO [VaauSchedulerEventListenerImpl] Job run time: 0s
10:56:21,904 INFO [VaauSchedulerEventListenerImpl] Next Run: null
Thanks..
Edited by: IDMuser19 on Aug 24, 2011 4:06 PM
Edited by: IDMuser19 on Aug 25, 2011 10:58 PM

Thanks rajiv for the reply..
No i am not able to import users too..getting same error in the rbacx.log
I tried with below details
Xellerate Home: C:\Oracle\Middleware\Oracle_IDM1
Login Config : C:\Oracle\Middleware\Oracle_IDM1\server\config\authwl.conf
User Name: XELSYSADM
Password : ●●●●●●●●
( in version 11.1.1.3.6 does not prompt for these two Provider URL: t3://localhost:14000 , Initial Context Factory: weblogic.jndi.WLInitialContextFactory)
here the OIA and OIM are in different domains.. i am able loginto OIM with xelsysadm without any problem just followed the instruction in the integration doc not sure where i did a mistake..
Please let know if have any idea..Thanks..
Edited by: IDMuser19 on Aug 30, 2011 8:25 AM

Sharepoint and SSRS integration Error Requested registry access is not allowed.

I have integrated SSRS with sharepoint foundation 2010, it was running fine but suddenly its starts giving me error as -
"An unexpected error occurred while connecting to the report server. Verify that the Reporting Services Service Application mapped to this web application is available OR the report server is available
and configured for SharePoint Integrated mode. --> The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. --->
Microsoft.ReportingServices.Library.ReportServerDisabledException: The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted
content. ---> System.Security.SecurityException: Requested registry access is not allowed."
Now i am not able to read reports or cant access all database options in sharepoint,it says
registry access is not allowed
I tried to reset encryption key and allowed all access to registry keys buts its giving same error .
Please suggest me what should i do now, i stuck here...

Hi Bhagyashri,
From your description, there have two questions in the environment:
"Requested registry access is not allowed" while access SharePoint sites
and "The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database" while viewing reports
For the first issue, the cause is the SharePoint web service account can't access some registry keys.
For the second issue, the cause is that the report database was restored from another server, and the encryption key was not restored correctly.
To fix the issue, please:
Follow "solutions" in this article
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx to fix "Requested registry access is not allowed"
Restore the encryption key again, or please delete the key and then reset every credential setting in SSRS data source connection
Thanks,
Jinchun Chen
Jinchun Chen(JC)
TechNet Community Support

Essbase and OBI integration - error establishing connectivity

Hello,
We are working on setting up the Essbase connectivity from the OBI Admin Tool on our laptops and have run into an issue whereby OBI is not connecting to Essbase. I can use the ESSCMD command from a command prompt to connect to the Essbase server; however, when I attempt to use the OBI Admin Tool to Import the cube (File > Import Metadata > Essbase 9) and enter the essbase server hostname and appropriate credentials I receive an "The connection has failed. Essbase Error 0". I cannot move forward from this screen. Any ideas as to why I would not be able to connect to the Essbase cube from the OBI Admin Tool ?
Specs
OBI Server = 11.1.1.7.1
OBI Server OS = Linux
Windows Laptop w/ OBI Admin tool 11.1.1.7.1 and Essbase Client 11.1.2.3
Essbase Server = 11.1.2.1
Essbase Server Clustered = Yes
Environment Variables on Laptop
ARBORPATH = C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
ESSBASEPATH = C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
PATH = C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;%ARBORPATH%;C:\Program Files (x86)\RSA SecurID Token Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Enterprise Vault\EVClient\
Contents of bi_init.cmd on Laptop
@echo off
rem overwrite JAVA_HOME
set JAVA_HOME=%~d0%~p0..\..\..\..\..\jre
if exist "%JAVA_HOME%\bin\java.exe" goto:doneJAVAHOME
rem abort
echo *******************
echo ****** ERROR ******
echo *******************
set /p prompt=[Invalid JAVA_HOME: %JAVA_HOME%] Enter return to abort
exit 100
:doneJAVAHOME
set ORACLE_HOME=C:\Oracle\oraclebi\orahome
set ORACLE_INSTANCE=C:\Oracle\oraclebi\orainst
set ORACLE_BI_APPLICATION=coreapplication
set ARBORPATH=C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
set ESSBASEPATH=C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
rem call %ORACLE_INSTANCE%\bifoundation\OracleBIApplication\%ORACLE_BI_APPLICATION%\setup\user.cmd
if NOT "%1" == "" set COMPONENT_NAME=%1
set PATH=%ESSBASEPATH%\bin;%ARBORPATH%\bin;%ORACLE_HOME%\bifoundation\server\bin;%ORACLE_HOME%\bifoundation\web\bin;%ORACLE_HOME%\bin;%JAVA_HOME%\bin;%windir%;%windir%\system32;%PATH%
if "%2" == "" goto:end
%2
:end
Thank you!
Mike

Which version of OBIEE? Which Essbase components are installed on the OBI machine which opnes the connection to the Essbase server? You need at least a 9.3.1 client.
Cheers,
C.

Error while XI and xMII integration (Plain HTTP as sender)

Dear Friends,
   I am doing the scenario XI and xMII integration. While sending the input file from plain HTTP adapter the result comes as follows in *sxmb_moni* :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1/>
<SAP:P2/>
<SAP:P3/>
<SAP:P4/>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: <xMII server name></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack/>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In HTTP Client Adapter for XI 3.0 it is shown as follows:
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL
</SAP:Code>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: <xMII server name> </SAP:AdditionalText></SAP:Error>
Please show the way to rectify this error.
Regards,
Jagan.

Dear Sudharshan,
   I'm doing the scenario which is in the following blog.
/people/dhanabal.thangavel/blog/2008/02/07/xi-and-xmii-integration--part-1 ==> XI and xMII Integration - Part 1
This is a synchronous one. So I set QOS as BE in Client Http Adapter for XI 3.0.
Scenario is HTTP <--> XI <--> xMII
The following errors are I found:
1) In RWB -> Message Monitoring
Status : Canceled with Errors
Message Details:
SOAP : call failed
SOAP :error occured: java.net.UnknownHostException: <HOST>
Exception caught by adapter framework: <HOST>
Delivery of the message to the application using connection AFW failed, due to: <HOST>. Setting message to status failed
The message status set to FAIL.
Returning synchronous error message to calling application: <HOST>.
2) Error coming in the Client Http Adapter for XI 3.0 as follows:
*URL:*
http://xxxxxx07:xx10/sap/xi/adapter_plain?namespace=http%3A//www.xxxxxxx.com/XIBatch3/10099/xMII_Integration&interface=xMII_Integration_Sync_Outbound&service=BS_BATCH3&party=&agency=&scheme=&QOS=BE&sap-user=xxxxx&sap-password=xxxxx&sap-client=xx1&sap-language=EN
*Result:*
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException:<HOST></SAP:AdditionalText></SAP:Error>
*Input XML file:*
<?xml version="1.0" encoding="UTF-8"?>
<ns1:XacuteRequest xmlns:ns1="http://www.lighthammer.com/Xacute">
   <ns1:LoginName/>
   <ns1:LoginPassword/>
   <ns1:InputParams>
      <ns1:ProductName>ProductA1</ns1:ProductName>
   </ns1:InputParams>
</ns1:XacuteRequest>
*WSDL file (Which is generated using the xMII transaction):*
<?xml version="1.0" encoding="UTF-8"?><definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.lighthammer.com/Xacute" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.lighthammer.com/Xacute">
    
    <types>
        <s:schema elementFormDefault="qualified" targetNamespace="http://www.lighthammer.com/Xacute">
            <s:complexType name="InputParams">
                <s:sequence id="InputSequence">
                <s:element maxOccurs="1" minOccurs="0" name="ProductName" type="s:string"/></s:sequence>
            </s:complexType>
            <s:element name="XacuteRequest">
                <s:complexType>
                    <s:sequence>
                        <s:element maxOccurs="1" minOccurs="0" name="LoginName" type="s:string"/>
                        <s:element maxOccurs="1" minOccurs="0" name="LoginPassword" type="s:string"/>
                        <s:element maxOccurs="1" minOccurs="0" name="InputParams" type="s0:InputParams"/>
                    </s:sequence>
                </s:complexType>
            </s:element>
            <s:complexType name="Rowsets">
                <s:sequence>
                    <s:element maxOccurs="1" minOccurs="0" name="FatalError" type="s:string"/>
                    <s:element maxOccurs="1" minOccurs="0" name="Messages" type="s0:Messages"/>
                    <s:element maxOccurs="1" minOccurs="0" name="Rowset" type="s0:Rowset"/>
                </s:sequence>
                <s:attribute name="StartDate" type="s:dateTime" use="required"/>
                <s:attribute name="EndDate" type="s:dateTime" use="required"/>
                <s:attribute name="DateCreated" type="s:dateTime" use="required"/>
                <s:attribute name="Version" type="s:string"/>
            </s:complexType>
            <s:complexType name="Messages">
                <s:sequence>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Message" type="s:string"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Columns">
                <s:sequence>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Column" type="s0:Column"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Column">
                <s:attribute name="Name" type="s:string" use="required"/>
                <s:attribute name="Description" type="s:string" use="required"/>
                <s:attribute name="SourceColumn" type="s:string" use="required"/>
                <s:attribute name="MinRange" type="s:double" use="required"/>
                <s:attribute name="MaxRange" type="s:double" use="required"/>
                <s:attribute name="SQLDataType" type="s:int" use="required"/>
            </s:complexType>
            <s:complexType name="Rowset">
                <s:sequence>
                    <s:element maxOccurs="1" minOccurs="1" name="Columns" type="s0:Columns"/>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Row" type="s0:Row"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Row">
                <s:sequence id="RowSequence">
                <s:element maxOccurs="1" minOccurs="1" name="Quantity" type="s:long"/><s:element maxOccurs="1" minOccurs="1" name="ProductName" type="s:string"/></s:sequence>
            </s:complexType>
            <s:element name="XacuteResponse">
                <s:complexType>
                    <s:sequence>
                        <s:element maxOccurs="1" minOccurs="0" name="Rowsets" type="s0:Rowsets"/>
                    </s:sequence>
                </s:complexType>
            </s:element>
        </s:schema>
    </types>
    
    <message name="XacuteSoapIn">
        <part element="s0:XacuteRequest" name="parameters"/>
    </message>
    <message name="XacuteSoapOut">
        <part element="s0:XacuteResponse" name="parameters"/>
    </message>
    
    <portType name="XacuteWSSoap">
        <operation name="Xacute">
            <input message="s0:XacuteSoapIn"/>
            <output message="s0:XacuteSoapOut"/>
        </operation>
    </portType>
    
    <binding name="XacuteWSSoap" type="s0:XacuteWSSoap">
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
        <operation name="Xacute">
            <soap:operation soapAction="http://www.lighthammer.com/Xacute" style="document"/>
            <input>
                <soap:body use="literal"/>
            </input>
            <output>
                <soap:body use="literal"/>
            </output>
        </operation>
    </binding>
    
    <service name="XacuteWS">
        <port binding="s0:XacuteWSSoap" name="XacuteWSSoap">
            <soap:address location="http://<XMII_SERVER_NAME>/Lighthammer/SOAPRunner/Jagan/SDN_Fetch_Product_Qty"/>
        </port>
    </service>
</definitions>
Regards,
Jagan.

[svn:fx-trunk] 11601: Integrating Min' s recent fixes to FXGUtils for a group of attribute parsing bugs and clarification of error messages .

Revision: 11601
Author:   [email protected]
Date:     2009-11-09 22:00:50 -0800 (Mon, 09 Nov 2009)
Log Message:
Integrating Min's recent fixes to FXGUtils for a group of attribute parsing bugs and clarification of error messages.
QE notes: Please confirm test cases.
Doc notes: N/A
Bugs:
SDK-22982 - FXG compiler fails on percentage lineheight inside formatted text content
SDK-24093 - If a
tag has children, you do not get a compile error.
SDK-24092 - You get a compile error if you set justificationStyle="prioritizeLeastAdjustment"
SDK-24097 - Setting an invalid verticalAlign style on RichText has a typo in the error message
Reviewer: Min
Tests run: Checkintests, Bug test cases
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22982
    http://bugs.adobe.com/jira/browse/SDK-24093
    http://bugs.adobe.com/jira/browse/SDK-24092
    http://bugs.adobe.com/jira/browse/SDK-24097
Modified Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGException_en.properties
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RichTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich BlockTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich TextLeafNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich TextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/BRNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/ImgNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TabNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextHelper.j ava
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/text/AbstractCharacte rTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXGSAXScanner.java

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

Log On to null and Plugin Manager error

After installing BOE XI 3.1 Update and SAP Integration Kit 3.1, when attempting to log on to InfoView get a Log On to null showing up in the upper corner and when attempting to use SAP Authentication get:
Account information not recognized: Plugin Manager error: Unable to locate the requested plugin secSAPR3 on the server. (FWB 00006)
SAP Authentication doesn't show up in CMC either. Any ideas? Already checked SAP Java Connector.

Here is the "README":
wdeploy: Business Objects Deployment tool
Objective: To deploy Business Objects web applications.
Location of online deployment guides:
BusinessObjects Enterprise XI 3.1 Web Application Deployment Guide for Windows
BusinessObjects Enterprise XI 3.1 Web Application Deployment Guide for UNIX
1. Go to http://help.sap.com
2. Click on tab "Business Objects"
Please note that you will need your SAP Service Marketplace USER ID and PASSWORD to access this material.
If you do not have the necessary credentials contact your SAP support center.

Oracle Portal and Discoverer Integration

Portal Version: 9.0.2.0.1
RDBMS Versjion: 9.0.1.3
OS/Vers. Where Portal is Installed:: Suse 7 SLES
Error Number(s)::
Oracle Portal and Discoverer Integration
We're trying to integrate Discoverer with Portal unsuccessfully.
We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
In view mode, the worksheet portlet shows the error:
"The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
(WWC-00000)
An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
44846)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The following error occurred during the call to Web provider:
oracle.portal.provider.v2.PortletNotFoundException
at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
at java.lang.Throwable.<init>(Throwable.java:78)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
(DiscoPortletPersonalizationMgr.java:65)
at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
"Failed to refresh portlet. Please verify that the information used to create the
portlet instance or customization is still valid. Otherwise, please contact your
iAS administrator. oracle.discoiv.controller.FatalControllerException:
DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
code: 0 completed: No null"
Any ideas?
Thanks

Hi there,
Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
Hope this helps
Mark Rittman
[email protected]

Facebook and Twitter integration not working

I'm have trouble using Facebook and Twitter integration in Mountain Lion. When I click 'Click to Tweet', or 'Click to Post', nothing happens; I don't get the notecard looking thig, and it's like I never clicked the button. Same thing with sharing from an app, except for Twitter. I receive notifications from both just fine, but I'm unable to post. I can tweet something from the sharing menu (link to a webpage with Safari, for example), but I cannot send a tweet using the 'Click to Tweet' button in Notification Center. Also, I cannot post to Facebook by neither sharing nor the 'Click to Post' button. So far I have tried sharing with Safari, Finder, and Preview, all with the same results. (Facebook sharing with iPhoto does work, but I don't believe that is integrated with OS X.)
I have also tried the following, with no luck:
Checked my settings on the Facebook and Twitter sites.
Removed my acounts and re-added them.
Obviously, my internet connection is working.
Added my Facebook account to the 'Guest User' account, and another administrator account.
Had a friend add his Facebook account to his own (limited) account on my computer--he could not post to Facebook either.
I believe the last two things I tried indicate that this is a system-wide problem. A couple more things to note: 1) there is no kind of error message; it just sits there, like nothing happend, no 'spinning wheel' or anything. 2) It DID work before. Twitter worked when I first upgraded to Mountain Lion, and Facebook worked when I installed the 10.8.2 update. I don't use either often enough to know when exactly they stopped.
Here is a video illistrating my problem.
It's been driving myself crazy with this over the past few days, and can't seem to find an answer anywhere. I also seem to be the only one with this problem.

First, I would eject whatever it is that you downloaded. Go to Finder and eject it that way or depending how you have your system set up, do the two finger tap and Eject it. Download the link above. Once it downloads, double click it to install it. It should work. If it doesn't you need to use your Disk Utility to check for errors. Click your Finder again and then Applications. Scroll down to Utilities and then Disk Utility. Click on your hard drive and you will get a menu of items on the right side. Towards the bottom, you will see a button to Verify Disk Permissions. Click that and let it run. It may take a few minutes to finish. Once it's finished there may be a list of things wrong with your system. Click the Repair Permissions and let the computer do it's thing. Use Disk Utility at least once a month to make sure everything is in order on your system. If this doesn't fix it, I don't have any other suggestions. I'd hate to say do a fresh install but that might be the next step if this doesn't work.
Something else to consider is that is if you use Time Machine and the system did work at one point, you could go back to the last known good point and reinstall that back-up. You would lose anything you have saved since that point (obviously). If you take steps to back up your information, that should not be an issue. (For me), Time Machine works as advertised. If you are not backing system up regularly, shame on you. You need to start ASAP backing up. It's an easy process and it's times like you are having now, that make the small preventive maintenance, worth extra time and effort.
Good luck.

FRM-41211: Integration Error: SSL failure running another product Error

Hai,
I am developing POS Application in Oracle(Forms6i/Reports6i). I design the Invoice Print Format in Reports6i and call from the Invoice Form. When the
user save the Invoice I Commit the Invoice and call the Invoice Report for Printing Immediately. I use Epson TM U210B Label Printer for Billing. Sometimes the Invoice Print is not coming in the Printer and it gives the
following error(especially the First print after restart the computer).
FRM-41211: Integration Error: SSL failure running
another product
After that if you print further for transaction no plm. only it gives the error first time of print
So Please give the solutions immediately. I am waiting for Ur favourable Reply.
Ur's Shahul

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

Run report --- Integration Error ----SSL failure

I have a form that call a report through the Run_Product Built, this works fine on Developer 6 version, but after I upgraded to 6i, everytime I press the buttonn that call the report, an error message will appear that say "FRM-41211 Integration Error SSL failure running another product" after the Report Background Engine appeared. And the report will not start.
But if I press the button again, all will be fine.
Does anyone know what happens ?
PLease help!!!!

It is a bug in Forms 6i and possible workaround (from Metalink) is:
WORKAROUND as follows :
This brings up the Background Engine on startup and minimizes it.
1. Create a shortcut for rwrbe60.exe and do a CTRL+C to copy it.
2. Right click on the TASK BAR at the bottom of the screen and get the TASKBAR
Properties box up.
3. Select ADVANCED
4. Expand Tree for PROGRAMS.
5. Click of STARTUP folder.
6. Do a CTRL+V to Paste in the Shortcut to rwrbe60.exe.
7. Right Click on Shortcut and select Properties.
8. Click Shortcut Tab.
9. Make sure of the following fields are as follows:
TARGET : {drive}:\{path}\rwrbe60.exe /c
START IN : Is the location of your Reports and Forms.
SHORTCUT KEY : None
RUN : MINIMIZED

Integration error SSL failure running another product. - Urgent

Anybody knows what could be the possible problem and how to solve it. This error is coming when I am running RUN_PRODUCT built-in forms 6i, that application was running for 2 years in Forms 5, without any problem.
I have included the message what Forms doucmentaion had.
FRM-41211: Integration error: SSL failure running another product.
Cause: There is a problem detected when launching another product.
Action: Check the RUN_PRODUCT built-in.
Level: 99
Type: Error
null

I got this error when I was using 4.5, it may be caused by the
correctness of report_path in registry.
Regards,
George
Anybody knows what could be the possible problem and how to solve it. This error is coming when I am running RUN_PRODUCT
built-in forms 6i, that application was running for 2 years in
Forms 5, without any problem.>I have included the message what
Forms doucmentaion had.>FRM-41211: Integration error: SSL
failure running another product.>Cause: There is a problem
detected when launching another product. >Action: Check the
RUN_PRODUCT built-in. >Level: 99 >Type: Error >null

Integration Error:SSL failure running another product.In DeveloperSuite 10g

I'm using DeveloperSuite 10g. I'm trying run the report from Forms but when I'm
clicking on button to run report using RUN_REPORT_OBJECT I'm getting following
error :
Integration Error : SSL failure running another product.
Can any one explain why I'm getting this error.
Regards
Alpesh.

Hi alpesh
I think you are good at oracleDS 10g and it is running on your machine successfully. But I am not able to run any form on my system.
My OS is Win XP with service Pack 2
Installed Oracle Database 10g
Installed Oracle DS 10g
Able to run reports on paper layout and web layout, But can not run forms. Error is shown on the IE Ver 7. Only source code is displayed. can you help me out from this.

Forms / Reports 6i - slow starting printing & FRM-41211 Integration error

We are having a problem with Forms / Reports 6i that seems to be slowly getting worse.
When beginning printing, the CPU usage goes up to 100%. In task manager I can see IFRUN60.EXE or RWRBE60.EXE, or IFBLD60.EXE or RWBLD60.EXE taking up 70% or so of the CPU time with the rest being taken up by the SPOOLSV.EXE spooler service.
This can be observed when
* Starting the Reports background generator from the Forms runtime
* Printing from a "print form" function inside the Forms runtime
* Starting Reports builder
* Printing from Reports Builder
* Printing from Forms Builder
The big problem is launching Reports from the Forms runtime. If this CPU / Spooler wheel spinning takes more than 30 seconds or so (and it can on slower machines), Forms thinks that it has failed to launch Reports and gives the error "FRM-41211 Integration error: SSL failure running another product" Eventually the reports background generator will finish launching.
This happens on NT 4, 2000, XP, and 2003 server. I have tried this in a "clean" configuration where nothing else (no extra services or anything) is running at all and this still happens. We are currently running Forms & Reports Patchset 17.
Does anyone have any idea what is causing this? Thanks.

More info:
This is one of the lines that is calling the report:
RUN_PRODUCT(REPORTS, 'ORDER_PRINT.RDF', SYNCHRONOUS, BATCH, FILESYSTEM,ORDER_ID,'');
Here is another one:
RUN_PRODUCT(REPORTS
,'OE_AUTO_QUOTE'
,SYNCHRONOUS
,RUNTIME
,FILESYSTEM
,ORDER_ID
We have a client/server setup. We are running 6i forms and reports, with a 9 database.
There have been no changes to these forms or reports. And it doesn't happen all the time. It just happens every-so-often.
EDIT - I guess it has been doing this for the past 3 weeks. One user says it happens everytime she tries to print anything from a form......
I've searched the forum about this and there are a lot of unanswered questions. I'm thinking my chances are slim on figuring this out.
2nd EDIT - I looked at the documentation at
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164945.1
everything seems to be right - according to that. So I'm wondering if this has anything to do with any sort of networking issues.....
.....3rd EDIT........
Still searching. It looks like this person has the same problem. http://www.webservertalk.com/archive149-2005-11-1283220.html
Having problems with the rwrbe60.exe
I'm wondering if there was some sort of patch Microsoft let out that is causing this issue?
null
Message was edited by:
loweride

FRM-41211 integration error

When we are calling Oracle report builder 6i report from Oracle forms 6i first time it gives us a FRM-41211 integration error. It's urgent.

hi
the problem in u r code please check u r run_product();
and also try something like this.
Errors
FRM 41211 Integration Error: SSL Failure Running Another Product.
Symptoms
"Frm-41211 Integration Error Ssl Failure Running Another Product" error while calling a report from form that is invoked by a shortcut place in the desktop. The Form runs fine when running from forms builder.
Cause
This is caused by the incompatibility introduced by the shortcut settings in XP.
Fix
In the Properties of the shortcut goto Compatibility-->Compatibility Mode tab. There uncheck the "Run this program in compatible mode for..." option. This will revert the default compatibility. This solves this issue. . sarah

FIM and BPC Integration error

Similar Messages

Maybe you are looking for