Final cut pro quality loss

I have final cut pro 7.0.3 and when i import my footage and watch in the viewer window it looks crisp as it should as it is 1080p video but when i watch it after putting it onto my timeline in the canvas window I can notice the quality has decreased. Then I tried exporting it hoping it was just the canvas but no, once exported the quality looked as if it was 360p..... Need Help
Thanks

Go to the SEQUENCE MENU and shoot SETTINGS. What do they say for COMPRESSOR? DV?
What is the format of the footage you are trying to edit? Did you convert it to an FCP friendly format? FCP doesn't just work with any old QT footage you decide to bring into the project...it has to be FCP type media.

Similar Messages

Exporting from Final Cut Pro - Quality of AfterEffects Text Graphics

I am once again struggling with Final Cut Pro exports in terms of the look and quality of AfterEffects graphics.
I have AfterEffects MOV files that look fine as is (both as Animation and as Apple Pro Res) and they look fine on the timeline in FCP 7. When I export though from FCP (in multiple ways - H.246, AppleProRes, 1080/720, etc.), the graphics within the exported video are breaking up and look pixellated. Any advice? Thank you!! - [email protected]

This is very hard to tell because, first, we don't know anything at all about your export settings, frame rate, frame size or even how you are judging the quality, and second, this is not a Final Cut Pro forum. There are a bunch of FCP users that use AE but if everything looks great coming out of AE as a rendered DI (digital intermediate) and your are using the DI in FCP then the problem is in Final Cut.
Maybe a better explanation of the process in FCP and some screenshots or examples of the rendered from FCP vs the rendered from AE would help us figure out what is going on.

IMovie - Final Cut Pro ? Same Quality DV Video?

I would like to know if iMovie and Final Cut Pro have the same ".dv" quality in producing a movie.
Is there any 'loss' in the digital video quality if you use iMovie?
Can I get professional results equal to Final Cut Pro .. without all the bells and whistles?

Definitely.
You can't see any difference between DV material edited with iMovie, Final Cut Express, or Final Cut Pro. There is no "loss" in the digital quality if you use iMovie.

Quicktime 7.1.5/Final Cut Pro 4.5 Image quality problems

Hi.
A lot of the time when I export .dv video into a lower quality video (.mov, .mp4) there are weird lines that appear in the motion. It's hard to explain, so I will post an image of it.
http://img.photobucket.com/albums/1003/KhyronJinn/Screens%20with%20a%20purpose/Q uickTimePlayerScreenSnapz001.jpg
*Just tried again*
This happens with ANY export to any settings, even at the highest quality and almost identical hard drive space. I've also observed this problem when using still frames in Final Cut Pro, these lines of motion (I guess you could call them?) from one frame to another when extracted from a still. I'm at a complete loss here.

Use the De-interlace filter in FCP...If your using Compressor, best bet is to de-interlace in Compressor.

What export options in Quicktime Pro or Final Cut Pro should I select to export HDV video in .MOV files to highest quality Windows-compatible files?

I have some HDV video files imported through iMovie to .MOV files with Apple Intermediate Codec.
I need to convert these to Windows compatible video files of the highest possible ( least loss) quality. What export options in Final Cut Pro or in Quicktime Pro should I select? The codex in the converted files must not be Apple Intermediate Codec, for which there is no Windows version.

Okay, I read the whole Flip4Mac website.
Flip4Mac is an application for Apple computers.
Perhaps my question was unclear. When I posed it I was thinking of asking somebody with an Apple shop to do the conversion for me, and wanted advice on settings for his QUicktime Pro /Final Cut Pro that would produce the highest quality Windows -compatible files.
The Windows version of Quicktime will not play Quicktime files with Apple Intermediate Codec. You get black screen video, although the audio does come through.
So here's what I need: I need a Windows application that will transcode Quicktime files in Apple Intermediate Codec, with no loss or very little loss, to WIndows-compatible files. All Windows, all the time. Thank you.

Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
https://discussions.apple.com/message/12073794#12073794
I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc. Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted.
To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export. My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
Example A
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all.
Example B
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
Example C
Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
Example D
Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded. This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e., 13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena. Did I misuse Compressor? I think the sample video exported as a self contained QT movie was the right thing to do? Not sure where I went wrong.
Thanks in advance for Feedback and Recommendations. For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
BoBo

Thank You, Brad, for responding; glad to hear I'm not the only one having similar Compressor issues.
You may have hit on something. Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts? And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
What version of Toast do you have? Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music. I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
Thanks,
BoBo

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

Every video put into Final Cut Pro exports in horrible quality regardless of format/settings.

Hello fellow Mac enthusiasts,
I'm having a problem which may or may not have been plaguing my studio since day one. Every video that we edit in Final Cut Pro exports in MUCH lower quality than it was when it was imported, not only that, the file size of the newly exported video is several times the size of the original. What I end up getting is a file too large for our clients to email around. We recently had a client come into our studio with a flash drive full of 15 second avi's no larger than 900 KB, he wanted a few of them edited together with simple cross fade transitions, and even a few seconds of dead space cut out. He needed them to be the highest quality possible for a powerpoint presentation he may now be unable to give. At first I exported them as Uncompressed avi's, best quality, thousands of colors, and no sound. The resulting file was not only blurrier, but now 260.5 MB!! And that one was with zero edits! The original was 803 KB and crystal clear. So after that I decided to try a few tests. We also produce a bi-weekly hour-long local television show, which looks fine on television but now I'm wondering how much better it could and should look. I've been exporting that out as a Quicktime, Apple ProRes 442 HQ, Interlaced bottom-field-first, zero filters, both compressor native and NTSC 720 X 480. I attempted this method on the client's original 803 KB with zero edits and not only did it export a completely unusable video compared to the original, but it was now 57.1 MB. What is going on here? Is Final Cut conspiring against me? I'm guessing it's something in my settings which I'll shamefully admit I know absolutely nothing about. Could anyone help a struggling video editor do his job?
Joey

Hey guys sorry it took me song long to respond it's been a busy week filled with many things not relating to final cut...
In response to David's post, the original file is indeed larger than 720X480, though it's dimensions are not available to see in the 'more info' associated with the file itself. By comparison, the apple pro res LT file I exported through final cut of the same avi file is 720X480, and looks significantly worse.
[URL=http://imageshack.us/photo/my-images/87/screenshotofavis.png/][IMG]http://img87.imageshack.us/img87/5421/screenshotofavis.png[/IMG][/URL]
This was after I created a new project, made the sequence settings into Apple ProRes lt 30p under the audio/video settings in Final Cut, and exported it as the same with 'current' dimensions (it was listed as 850X637, maybe that was the original?) Although I did have to render the original avi itself once it was placed in the timeline. I guess there's no way to know exactly what sort of avi my original file is so I can match my sequence to it? The 'more info' (to be fair im sort of used to 'properties') leaves something to be desired..
I guess my question is: what else can I change in my settings to leave the quality of the video intact, if anything?
Thanks everyone.

Video quality changes when imported into Final Cut Pro

I have video files that I have imported from an external hard drive that were transferred from an HD camera. When viewing the footage directly from the hard drive, the quality is great. Once imported into Final Cut Pro, however, there are small "flares" (don't know how else to describe them) that appear for split seconds across the screen. The best way to describe it is if you are watching a television that has an antenna, there will be static or interferance on the image. This is barely noticable but I can't determine what would cause the decline in quality. My video settings are set to DV NTSC 48 kHz and wonder if this is the problem or if anyone knows of something else that I should change prior to importing.

Thank you so much for your help! I am technically challenged and STRUGGLING to say the least.
Some files are definitely H.264 and I can convert them to ProRes. I also have clips that are
DVCPRO HD 1080p25, 1,440 x 1,080 (1,888 x 1,062)
Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
Current Size: 1,440 × 810 pixels
Will I need to do anything to those as well?
Here is the question I'm afraid to ask because I think I know the answer already. Can I simply replace the clips in my sequence with the newly compressed ProRes files or do I have to change all of the video and sequence settings and then start all over?

Final Cut Pro X -- Export is Low Quality?

I'm wondering about some of the behavior on export with Final Cut Pro X.
While editing my videos, I set preferences to 'use proxy media' to make playback smoother.
However, when I go to export the video as a high-quality 1080p file it's clear that Final Cut is using the proxy files to make this video -- rather defeating the point of exporting at 1080p. Now, it's not a problem if I switch playback in preferences from 'use proxy media' to 'use high quality media' -- then the export is actually high quality.
My question is this: is final cut supposed to work this way? Why on Earth would it not default to use the highest quality files when exporting? It's not a huge deal, but it is annoying when I spend several hours exporting a project only to find out at the end that I accidently left playback on 'proxy media' and have to restart the process.

I've read a few threads on this issue. Are you using the share feature or exporting to compressor? My understanding is when you export you need to set to original or optimize setting in preference.
More about this topic here.
https://discussions.apple.com/thread/3166556?start=0&tstart=0

Final Cut Pro exports very low quality video to DVD

I tried exporting a timeline to a DVD from Final Cut Pro X 10.0.3 today. Every clip in the timeline was 1080x1920, but the DVD export menu insisted (without offering an option to change settings) that Final Cut export at 720x480. The Blu-Ray menu offers 1080x1920 exporting, though. Is there any way to get the app to export to DVDs at 1080x1920?

Yes, you can create an AVCHD Disc which is basically Blu-ray quality on a cheapo standard DVD.
Select Share>Blu-ray and in the window that opens make sure the Output Device is your DVD burner, not the hard drive.
Note that you will only get about 35 minutes at the highest quality.
If your video is longer the data rate will be reduced but should still produce good quality hi-def up to an hour or so.
You must play the DVD in a Blu-ray player. It will not work in a normal DVD player.

How do I achieve a high quality PAL SD DVD from Final Cut Pro?

From a PMW-EX1 camera file edited in Final Cut Pro I am unable to produce a high quality PAL SD DVD using compressor and DVD Studio Pro (tried multiple combinations).
Using Final cut pro and Magic iDVD I can achieve a high quality SD DVD with no changes in export.But am limited to the iDVD restrictions.
From discussions it appears using compressor and DVD Studio pro it is not achievable, it is very frustrating that the Apple product you have to buy is not as efficient as the free one?
If not possible then how do I access the encoded file from IDVD?
My Final cut pro sequence settings:
General - Aspect ratio: HDTV 1080i (16:9) 1920x1080, square and upper(Odd)
Quicktime video settings compressor: xdcam ex 1080i50 (35 mb/s vbr)
I

iDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
http://www.videohelp.com/calc.htm
3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
4. bring your encoded video and audio files into DVDSP and author

Final cut pro X is supposed to accept AVI. Yet the AVI files my client gave me don't work. I know there are softwares that can convert AVI to APPLE PRORES, but does that affect the quality of the media ?

Final cut pro X is supposed to accept AVI. However the AVI files my client gave me cannot be imported in my Final cut pro X. I know there are softwares that can convert AVI to APPLE PRO RES, but does that alter the quality of the media ?

There are apps that will give you tech specs on files. I think Media Info is one. Most likely it's in done delivery codec like DiVX. AVI is a piece of **** as a container anyway and should have been completely abandoned years ago.

Why is the text I create in LiveType appear so low Quality in Final Cut Pro

I been having problems trying to get my fonts and titles to look sharp because once I place them into Final Cut Pro, they become all pixelated. I have my playback at full quality, and even when I render the movie the titles look sloppy... What exactly is wrong?

It would really help if someone could tell me exactly what I need to do to achieve good looking titles... I would hate to be halfway through the project only to have to re-do everything because of a small technical error.
Powermac DC 2.0Ghz - 160GB - 2.5 DDR2 RAM + Apple Cinema 20 inch + Harman/Kardo Mac OS X (10.4.3)

Final cut pro quality loss

Similar Messages

Maybe you are looking for