Warnings and success messages in F-02

Hi Techi's
I am having a very strange issue in F-02 for posting in G/L accounts. It goes like that.
When I run the BDC in forground mode, whatever the information and success messages are being trapped are being captured in the IMSG table and later when I process the IMSG table givning perfect results including the last message number 312 (saying document number posted)
But this BDC would be scheduled in background later and when I run this in background call transaction is not traping the complete information and success messages including the last message number 312 also.
My complete processing is based on the last messages only which is the successful document number generation.
Please tell me why its not capturing that document number generation message. How can I reslove this.
Please help as soon as possible, its going very terrible now.
Regards,
-=Maddu=-

Hi all
I have found the solution to my problem. The question was, if I turned off the messages in the web template, is there another way to see the information and warning messages.
The way to do this is to put &WARNINGS_VISIBLE=X and/or &INFORMATION_VISIBLE=X at the end of the URL.
Thanks for all who helped.
Edited by: Nicholas Chia on Jul 20, 2009 12:43 PM

Similar Messages

Xcode problem, how do I get rid of doubled up warnings and error messages?

One of my cocoa projects is always showing the compiler warnings and error messages twice. It is only happening in one project which indicates to me that it must be something in this particular project configuration.
I have looked high and low for setting to control this behaviour in Xcode.
There must be a way to correct this behaviour.
I am using Xcode 3.1.4

You have to get rid of the triggers....and cleaning up the code is the only way to do that. As you've noted, it only happens in one project.

Update report row wise using row buttons and success message

Hi Jari,
Thanks for your reply but i wan't success message in success message region of page and not as popup or alert message.
for report it is classic report but two columns are text field.
Thanks
Manish
Hi,
On Demand process you can use HTP.P to output success message after you code.
Create also exception handler that output error using same HTP.P.
When you call Ajax in JavaScript
var ajaxResult=ajaxRequest.get();
Result you output are in variable ajaxResult.
You can use e.g. alert
alert(ajaxResult);
Refresh report depend lot of what report you have.
There is lot of posts relating interactive report and classic in this forum.
It might be good to create sample what you already have done to apex.oracle.com.
Also creating new post might be good idea as this is answered.
Regards,
Jari

866038 wrote:
Errors come from trying things that don't work.
For example, instead of =, using IN VALUEOF(NQ_SESSION.GROUP) or @{session.GROUP} or lots of other things.
The question is this:
how can I filter a column in Answers using the GROUP session variable which had been initialized in a row-wise initialization block?
I can find no way to do it. Mostly it returns no rows.Hi,
we had a similar requirement, where we have an external name that has project number values. We used row wise initialization to capture all the projects that a user belongs to. Then, we applied the filters at the RPD level, instead of doing it at the report level. From you requirement I see that you are trying to filter the groups based on user login. When a user logs in, he will see the information about the groups that he only belongs to. Correct me if I am wrong here.
Assuming I am right about your requirement, providing the filter that you need apply in RPD.
On all the fact tables are joined to the Package Virtual Group dimension, apply the below filter.
case when 1=1 then (Dim)"."Package Virtual Group" END = VALUEOF(NQ_SESSION."GROUP");
The reason for use of case statement here is, it converts the logical sql to IN Clause, helping us acheive the exact query that we would want.
Please Award points if this helps.
Thanks,
-Amith.

How to display the error and success message in ALV

Hi expert,
i am doing recording through call transaction,from the output list of a ALV,now my requirement is after recordig how many record get success and how many get failed ,i need to display in Another ALV .please any one help me in this .
Regards
Swaraj

HI ,
             Use this following Perform form statment to display error message.
FORM format_message .
g_row = g_row + 1.
LOOP AT t_bdcmsgcoll.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = t_bdcmsgcoll-msgid
        lang      = '-D'
        no        = t_bdcmsgcoll-msgnr
        v1        = t_bdcmsgcoll-msgv1
        v2        = t_bdcmsgcoll-msgv2
        v3        = t_bdcmsgcoll-msgv3
        v4        = t_bdcmsgcoll-msgv4
      IMPORTING
        msg       = G_MSG
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc = 0.
      CASE T_BDCmsgCOLL-msgtyp.
        WHEN 'E'.
          FORMAT COLOR 6 ON.
          WRITE:/ g_row,
                / T_BDCmsgCOLL-msgtyp, g_msg.
          FORMAT COLOR OFF.
        WHEN 'W'.
          FORMAT COLOR 3 ON.
          WRITE:/ g_row,
                / T_BDCmsgCOLL-msgtyp, g_msg.
          FORMAT COLOR OFF.
        WHEN 'I'.
          FORMAT COLOR 4 ON.
          WRITE:/ g_row,
                / T_BDCmsgCOLL-msgtyp, g_msg.
          FORMAT COLOR OFF.
        WHEN 'S'.
          FORMAT COLOR 5 ON.
          WRITE:/ g_row,
                / T_BDCmsgCOLL-msgtyp, g_msg.
          FORMAT COLOR OFF.
      ENDCASE.
    ENDIF.
ENDLOOP.
ENDFORM.                    " FORMAT_MESSAGE
*&      Form success
      text
FORM success .
LOOP AT i_message.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = i_message-msgid
        lang      = sy-langu
        no        = i_message-msgnr
        v1        = i_message-msgv1
        v2        = i_message-msgv2
        v3        = i_message-msgv3
        v4        = i_message-msgv4
      IMPORTING
        msg       = g_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    WRITE : /2 g_msg COLOR 1.
    CLEAR G_MSG.
ENDLOOP.
ENDFORM.                    " success
*&      Form error
FORM error .
DATA g_msg(255).
LOOP AT i_message.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = i_message-msgid
        lang      = sy-langu
        no        = i_message-msgnr
        v1        = i_message-msgv1
        v2        = i_message-msgv2
        v3        = i_message-msgv3
        v4        = i_message-msgv4
      IMPORTING
        msg       = g_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    WRITE : /2 g_msg COLOR 6.
ENDLOOP.
ENDFORM.                    "error

Removal of the warnings and error messages

Hi,
I am using JAXB to read/write some objects. I wish to know how to disable(just prevent it from being displayed thats all) the warnings/errors that arise due to the non-compliance to the schema.
Thanks in advance,
Achyuth Krishna

For validation errors and warnings detected while unmarshalling XML data into Java objects, to disable it use method Unmarhaller.setValidating(false)

How to clear Success Messages on Tabular Form

In my tabular form I created a manual process for Update/Insert I have disabled the standard APPLYMRU process in order to use mine instead. I've done this so that I can set some column values that I don't want the user to enter. This is a Tabular Form type process with Execution Scope set for Created and Modified Rows. The process works fine.
I created 2 hidden page items P20_UPDATE_COUNT and P20_INSERT_COUNT. I use these as counters in the sql to count number of rows updated and inserted. I then use these as substitution variables in the success message. I set the values for P20_UPDATE_COUNT and P20_INSERT_COUNT to zero in the computations: Before Regions and also After Submit computations ( I realize may not need to reset in both). After submit the branch is to the same paqe.
The problem I am having is that the success messages do not get cleared out. If I update one row then click the Submit button row is updated and success message appears 1 row updated, 0 rows inserted - Fine. I then update 2 rows and insert one row and the message appears as: 1 row updated, 0 rows inserted. 2 rows updated 1 row inserted. It seems the messages keep getting appended to the previous message if they are different. This does not occur if I use the standard APPLYMRU process. Is there a way to clear the prior messages? Note; this is happening in my application on the Oracle Apex site so the version is current version.
Thanks for any help!

Hi Therese,
Not sure what is going wrong, but I remember I at one point had to make custom success messages. There is a function that lets you print the message yourself:
apex_application.g_print_success_message
I don't think there is any oracle documentation on it, but here's an old blog post that explains how you can use it:
Using individual error/success messages in APEX - APEX-AT-WORK by Tobias Arnhold</title><meta content='text/htm…
You can use it to overwrite/bypass the standard success messages.
Regards,
Vincent
http://vincentdeelen.blogspot.com

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

Images with success and error messages

Hi,
I am using theme 20. I want to add a success image on all success messages and an error image on all validation failure messages. I can do this by putting img tag in messages individually. Is there an easy way by which I can make sure that all success and error messages are always displayed with a corresponding image without including img tag in every message?
Thanks,
Bhavesh

Hi Bhavesh,
in page template there is Subtemplate region related to success, error and notification messages. You can put there your HTML tags and add some css class or image for every page using this template.
Regards,
Przemek

Success and Failure messages Report

Hi All,
Could you advice if it is possible within SAP XI to generate a report or list of messages with sender party, receiver party and timestamp for reference. Say end of day we need to run a report of how many successful message passed thru XI and the messages that failed. In XI we can see that, but can we generate a report out of automatically at the end of the day, or mail it to a particular e-mail address?
Can I create a spreadsheet report of all the success and failure messages with the time, sender party, receiver party automatically whenever desired.
Thanks in advance
Ravijeet

It is possible. Have a look at this blog have more idea on the table that needs to be used to pick the messages and the details.
[How-to enrich XI monitor's output|How-to enrich XI monitor's output]
Thanks
SaNv...

I have activated the genius for Ipad and the message that It was a success never disappears . It is impossible to access the itunes or apple store. What can I do?

I have activated the genius for Ipad and the message that It was a success never disappears . It is impossible to access the itunes or apple store. What can I do?

You have encounter Activation Lock, the antitheft feature of the iPhone. The previous owner did not remove the phone from their account. The phone cannot be used until they do. Return to the store and let them sort this out. It is very unusual for someone to "forget" to disable activation lock, as it is necessary to do so to erase personal information on the phone. So it is quite likely you bought a stolen phone.

Custom success and failure messages on quiz results slide

I'm trying to create a custom success and failure message on the quiz results slide, using certain colours in the text caption to reflect our company's brand. So I've added an advanced action on entering the slide so that if the quiz percentage is 80% or more, the success message shows, and the failure message hides. It seems that this should work, but for some reason, only the failure message displays, regardless of whether I fail or pass. Has anyone else tried this with any success?
Thanks for your help!

I've changed the retake and continue buttons to image buttons, then added my custom success and failure captions which I've named 'fail_f' and 'pass_f':
And here is my advanced action on entering the quiz results slide:
The hide-button, is a white rectangle that I added so that I could place it over the retake button if they passed the quiz successfully.

Downloaded and installed trial version of Adobe Captivate. Even though I get a installed successful message it is not in applications folder. Where is it?

Even though I get a installed successful message it is not in applications folder. Where is it?

Hi 88Gears,
Try typing 'Captivate' in spotlight and see if it shows the application else you need to reinstall the software.
Regards,
Rave

WD abap - destroy success message

Hello,
I have a screen where I do the following:
CALL METHOD l_message_manager->report_success
EXPORTING
message_text = 'Changes were successfully saved!'.
when I navigate to another screen messsage area is still there but without the message.
How can I destroy message area without calling reset_view method?
Thank you.

Hi Georgy,
>It seems to be very inconvenient since if the user
>navigates to a different screen the message area is
>still there.
Yeah, it's only due to the message history. There is the idea to make it possible to switch it off. In that case the message area would become invisible automatically again in case no message was raised.
>What you are saying is that one message area gets
>displayed there is no way to get rid of it unless
>refresh the screen?
Only for success and warnings. Error messages are not kept in the history as they rather reflect the current state of an application. There is a way to get rid of the message - switching to old style message display (can be specified at the application). Of crourse, this soluation has drawbacks. The old style message displays lacks several features, like displaying message documentation, scrolling of messages, etc.
Personally, I would still use the new message area and accept for the moment that it won't get hidden once an success or warning message is raised. We are working on providing an improved user feedback that tells a user that the history contains items (reducing confusion) and making it possible to switch off the history (reenabling auto-hiding). That means that the problem will auto-solve itself at some time.
Best regards,
Thomas

Skillbuilders modal page - success message not closing in Internet Explorer

Hello,
I'm using Skillbuilders modal page plugin on Apex 4.1.
The plugin works great in all browsers except in IE, where I'm unable to close the success message by clicking on the "x" in the upper right corner.
I'll explain further.
I have a report on, say, page 10, and I'm editing each row in a modal page (page 11). Upon saving the changes, the modal page closes and a success message is shown on the page 10. I can see the message both in Firefox and IE, however, I am unable to close it in IE.
When I inspect the success message using Firebug in Firefox, I see that I have:
<div id="messages" style="display: block;">
<div id="success-message" class="success">
<img class="remove-message" onclick="$x_Remove('success-message');" alt="" style="float:right;" src="/i/delete.gif">
Action processed.
</div>
</div>However, when I inspect the success message in IE, I see:
<div id="messages">
</div>The success message is shown on the page, but it doesn't show in the page source code, and clicking on the "x" doesn't close it.
I've tried it with several themes, the problem persists.
Does anyone have any idea what might be the problem here?
Did someone have a similar problem?
Thank you!

I've been looking at it, kind of gutted that indeed the semi-colon means nothing. Was sure that was it, and then didn't bother to test it in the template anymore as it ate so much time already. That should teach me...
Anyway, I was puzzled too. Apparently it has to do with IE8 and jQuery appending code to the document, whether it is .append or .before. The element is there and all, but the onclick just does nothing. Why did it work after editing it? Probably because IE was then able/willing to pick the attribute up.
I've fiddled with it over and over, trying to find something ,googling it, but couldn't really find a certain cause nor fix. Putting in the anchor? Nope. Onclick reacting only on second click? Nope. Just do an alert? Nope. Just nothing works at all. I really just gave up. IE8 is just such a headache that by trying to "fix" it in its ways you're off worse.
In the end I fixed it in another way. My template is different than yours but the technique is the same.
I removed the onclick attribute from the success message region, on both page templates. If it ain't gonna work I don't want it there (good riddance too). I changed the href attribute too by just putting "#" in, which is probably just me being pedantic. This is my result success message template:
<section class="uRegion uWhiteRegion uMessageRegion clearfix" id="uSuccessMessage">
<div class="uRegionContent clearfix">
    <a href="#" class="uCloseMessage"></a>
    <img src="#IMAGE_PREFIX#f_spacer.gif" class="uCheckmarkIcon" alt="" />
    <div class="uMessageText">
      #SUCCESS_MESSAGE#
    </div>
</div>
</section>To be able to close it, I added some javascript in the page header:
<script type="text/javascript">
    $(document).delegate(".uCloseMessage", "click", function(){$(this).closest(".uMessageRegion").remove(); return false;});
</script>This is much in the way of a dynamic action with scope "live". I didn't want to bother with having to put a dynamic action on each page, and is why I did it this way. It works fine in each browser too, so hurray.
Your solution works too of course, it's much the same. I wouldn't call it a "workaround" too, since it didn't work initially anyway. I wouldn't look further and stick with what works best for you. :)

Report with BDC not displaying success message when run in Background

I am running a BDC report in Background mode.The below statement is not capturing the Success message when a document is posted.But when I am running the same in ForeGround mode it is capturing and is displayed in the output.Can anyone please help me in understanding why this is happening and how can I resolve this.
CALL TRANSACTION 'MB1C' USING bdcdata MODE mode UPDATE 'S'
MESSAGES INTO messtab.

Hi Madhu,
I think your BDC didnt generated any document when you run it in 'N' screen mode.
Debug your program when you run it in background
Goto Tcode :SM37
Select the job ( march checkbox )
==> in command prompt enter 'JDBG'
==> Then you can start reexecting the job .
You can check the sucess messages accordingly in debug mode
Also add a read statement on messtab for msgtype = 'S'.
Thanks
Bhanu

Warnings and success messages in F-02

Similar Messages

Maybe you are looking for