Final Cut Rendering and Editing

So I just got Final Cut Pro 4.0 and I am a total newbie at it. I have used it before at a friend's house, but I find the rendering long and HD consuming. Is there a way around this so that I can preview my content in real time without eating up HD before I can export the project? Thank you.

It's been a long time since I used version 4 and I can't remember whether or not it has Unlimited RT support. I'm pretty sure that it doesn't. Unlimited RT allows you to play back your timeline in real-time IF your system is fast enough to handle it. With some effects and filters, you pretty much have to render though because they are very processor intensive.

Similar Messages

Can I capture with Final Cut Pro and edit in Premiere Pro?

Since it appears that Premiere has issues with capture - at least for me but as I see it for others as well - and that I can capture with iMovie, can I consider using Final Cut Pro for capture - then cross to Adobe Premiere and the suite for editing, finalizing ? Or is there a problem to copy the shots/files from one program to the other (would they remain identified clearly so I could just import shots into Premiere afterward ?)
Thanks
Rob

Hi Rob,
When you capture HDV in FCP it creates a specific Apple HDV codec. This is a codec that is only available if FCP, Motion or Compressor is installed.
The two workarounds would be to use Premiere Pro on the Mac with one of the above mentioned apps installed on the same system or convert to a codec that can be read in Premiere.
Best,
Peter Garaway
Adobe
Premiere pro

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

When you "Send Movie to Final Cut Pro" and you cancel Rendering and how

I am moving from iMovie to Final Cut Pro and have multiple movies to send to Final Cut Pro. I would like to cancel the rendering in FCP until I actuall need it.

Uncheck Background Render:
Al

I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it.

I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it. Thanks, stevefromnorthfreo

Try outputting it as a MP4 or M4V
If Final Cut won't output it, Mpegstreamclip will convert it. So will Quicktime if you have the pro version.

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Can I migrate an iMovie project to final cut pro and keep the edits intact?

can I migrate an iMovie project to final cut pro and keep the edits intact? It may be a solution to my apparently corrupted iMovie

The manual tells ..
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver41812c7c
keep in mind: just the 'plain cuts', not the eye-candy iMovie offers, wil be transfered.
unfortunately it says ...:
You initiate the process from within iMovie. The project file and the media used in the project are copied to your Final Cut Pro library.
For more information, see iMovie Help.
so, if your iM doesn't work anymore, you can not transfer.
plus, my personal opinion!, I would start from scratch in FCPx...
What issues in iM do you expect FCPX to solve,...?

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup.

I tried downloading Final Cut ProX but my computer said that "this computer cant download Final Cut ProX" and i dont know why?

i tried downloading Final Cut ProX but my computer said that "this computer cant download Final Cut ProX" and i dont know why?

Is your iMac still really on OS X 10.2 Jaguar?
Could you supply more accurate info about your Mac.
What Mac do you have?
To find out info about your system,
Click on the Apple symbol in the upper left of the OS X main menu bar. A drop down menu appears.
Click About this Mac. A smaller popup window appears. This gives you basic info like what version of OS X your iMac is running, the speed of your iMac's CPU and how much RAM is installed.
Click on the button that says More Info.
A larger window appears giving you a complete overview of your iMac's hardware specs.
Highlight all of this info and copy/paste all of this into another reply to this post, editing out your iMac's serial number before actually posting the reply.
This will tell us everything about your iMac so we may begin to help with your iMac issues.
Final Cut Pro X System Requirements.
OS X v10.9.2 or later
4GB of RAM (8GB recommended for 4K)
OpenCL-capable graphics cardor Intel HD Graphics 3000 or later
256MB of VRAM (1GB recommended for 4K)
3.5GB of disk space

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

I'm a little confused by this?
Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

Student Help advice! what is best iMac model for Final Cut Pro and logic pro

Hi
I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
The specs that I have on mine are..
21inch
Upgrades include
Sdd drive 512gb
Intel core i7
16gb of ram
Or
27 inch
Upgrades
Fusion drive or sdd 250gb
Intel core i7
(Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
(Ram is way to expensive so will buy from second party)
Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
My budget is £1900
My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow. Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
You are correct about the issue with the smaller fusion drives. It's one of the reasons I am not high on recommending them. Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance. The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them. I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell. For the most part I assemble my own with OWC Mercury Elite enclosures. In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives. I also have some Seagate Barracuda 7200.xx drives. They all perform excellently and reliably.
Pls. refer to my earlier post for what i recommended to you.

Why Final Cut X and Not Premier Pro?

I've been using FCP for many years and was shocked when FCX first came out. Thought it was just iMovie with a few more features. I know there was a big update to FCX which added a bunch of features that pros need (why Apple would didn't just wait 6 mos. and release THAT version first is beyond me, but that's another thread in itself).
I can't use FCP 6 forever, but I'm nervous to make the leap. I have to say, Premiere Pro CS6 is tantalizing and is fully supported people seem to love it.
I make :30 sec. TV/web spots mainly, with the occasional longer project thrown in. We already have CS5 so upgrading wouldn't be too bad.
Why Final Cut X and Not Premier Pro?
Any advice is appreciated.

Alex Campuzano1 wrote:
Why Final Cut X and Not Premier Pro?
Any advice is appreciated.
first of all: I'm no pro - my personal enthusiasm about FCPX doesn't help you
maybe some 'real world' examples from professionals using FCPX:
http://fcp.co/final-cut-pro/news/906-making-a-music-video-shot-on-red-composited -in-after-effects-graded-in-resolve-and-edited-in-final-cut-pro-x
http://fcp.co/final-cut-pro/tutorials/784-final-cut-pro-x-real-world-use-on-the- iditarod-sled-dog-race
or this example from the Ripple Team:
http://fcp.co/final-cut-pro/tutorials/905-lightning-fast-organisation-of-media-i n-final-cut-pro-x
... to illustrate the very different GUI and workflows of FCPX.
it's probably crucial when youre used to the 'old' (no offense ment!) metaphores.
I assume a perfect integration of Premiere with AE and PS ... (which would completely overstrain an hobbyist like me - way too much options ) - FCPX is in its actual version more an island (even no integration with/to Motion5)
best advice was already given twice:
test on your own - keep in mind: it is very different ....

Final Cut Pro transitions edit window problem

I am totally new to Final Cut Pro and when I click on the transition from the timeline the transition window appears in the canvas window but the bottom half of the transition edit window does not appear. Any ideas? It shows the transition down the the bar with start and end and then bellow that it's all gray.

Figured it out on my own... sorry to bother you guys.

Compatibility issues with Final Cut Express and Final Cut Pro

I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
If I transfer project files from one platform to the other will i run into any issues?
Thanks for all and any help.

{quote:title=cuttingedge wrote:}
If I transfer project files from one platform to the other will i run into any issues?
{quote}
Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

Final Cut Rendering and Editing

Similar Messages

Maybe you are looking for