Finally fixed my Router

I had the same problem as many others with my Linksys routers always disconnecting and was unable to run torrents for any amount of time. I tried 4 different Linksys routers and had the same problem. Finally Linksys released firmware for my WRT54g2 that fixed all my problems. About time
Solved!
Go to Solution.

same here....

Similar Messages

Mac OSX NOT GETTING IP ADDRESS BECAUSE OF THE DHCP(FINAL FIX)

You may get some errors when trying to connect to the wireless connection.
LIST OF PROBLEMS:
-Auto-Assigned IP with 255.255.0.0 Subnet Mask and a 169.x.x.x IPV4 Address
-Unable to renew the DHCP beacuse the DHCP doesn't send the IPV4 address to your iMac/MacBook
-No IP
FINAL FIX:
-Log to the Router Configuration page inserting the default gateway address in your browser bar(It should be 192.168.1.1 though my default gateway is 192.168.0.1.....nevermind).
-Go to DHCP tab and make sure that DHCP is ENABLED
-Go to Wireless Settings and set Channel to "1" and the Wireless mode to 802.11 bg(In some routers it's 802.11 bg mixed)instead of 802.11 bgn or 802.11 n.(IN SOME ROUTERS THERE'S ONLY .11 and not 802.11....that's the same s**t though!)
-Reboot your router
-Shut down your machine and unplug the power cables
-When done press once the power button
-Re-Plug the power cables and turn on your MacBook/iMac
-Go to Network Settings,Advanced settings,TCP/IP and set IPV4 address to DHCP
SOFTWARE FIX(FIREWALL CONFLICT):
-Disable ANY non-Apple firewall or network management application such as mDNS responder,etc..

Great work, nice info, thanks!

Fixed my router 'connect' problem after coming out of sleep

After almost 2 weeks of agonizing over this, I think I finally fixed the problem that I was having of my Macbook Pro not wanting to reconnect to my router after being brought out of sleep.
Simply, all I did was try a Wireless G router instead of the N one that I had been using and I have yet to experience the problem again! I had been using a Netgear Wireless N (even forcing it to G did not help) and am now using a Linksys Wireless G instead. Not one issue so far!!

Apple Store currently thinks it's a hardware problem

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

How to Link equipments(PM) in a Settlement from AUC to Final Fixed Asset

Hi All,
I need your help with an integration problem between AA, CO and PM.
This is the scenario:
We are buying equipments that should not be capitaliazed until deliver them to the customer so to support this we do the following flow:
1. Create an sheduling agreement for the whole year with and AUC and a statistical Internal Order.
2. We create a 'Good receipt' for purchasing equipments(PM) againts the scheduking agreement. At this time we store the equipments in a specific storage location and those equipments are not capitalized. The equipments are create automatically.
3. We deliver the equipments to the customer, not necessarily all purchased equipments.
4. Monthly we have to capitalize the equipments that were delivered to the customer so we create a final fixed asset and execute the settlement of the AUC againts that final fixed.(First AIAB to create settlement rule and then AIBU to distribute)
Problem:
When we execute AIAB for the step 4 we can not link the equipments with the final fixed asset, in the settlement rule we have to calculate manually the percentage or the amount that shoul be settle according to the equipments that were deliver to the customer, but we would like to:
1. Link the equipments to the final fixed asset.
2. Update the material and quantity in the FI posting line item.
3. Update the quantity field in the final fixed asset master record automatically.
Do you have any idea?
Many thanks in advance.

Hi,
Please check in the screen layout for Asset Master. I think the equipment field is available.

A FINAL FIX THAT WORKS

Go to
http://discussions.apple.com/messageview.jspa?messageID=3349822&stqc=true

Geez...
When I tried to quote the original post, the function truncated apparently it... or maybe I did by accident...however, the original post:
A FINAL FIX
Posted: Oct 16, 2006 7:45 AM in response to: Tagliente Reply Email
After much arguing on the phone with apple support, I got a straight answer. The problems are due to old iTunes software and virus protection.
1) Uninstall iTunes, Apple Update, and Quicktime using the 'Add/Remove' software option in the control panel.
2) Open your program files folder (Found in My Computer in the C: drive)
3) Delete any folders that may be left such as iTunes, ipod, Apple Updater, Quicktime)
4) Download the iTunes 7 install package from the apple website (http://www.apple.com/itunes/download/). Be sure to save the file to your desktop.
5) Exit your web browser
6) Turn off all virus protection software. This includes firewalls, spyware protection systemguards, etc. The “how” to do this depends on your virus software. For example, with McAfee open the Security Center and click Computer and Files. Click configure. The new window has the options to turn things off. Turn everything off.
7) Install iTunes 7 (includes Quicktime [needed for iTunes])
8) Restart
9) Turn virus protection and firewalls back on
10) Plug in iPod and you’re golden!
This worked for me and I no longer get any messages about iPod in recovery mode or unable to update iPod.
Good luck.
Windows XP
By the way, I think I clearly stated in my post that when trying to update my nano from version 1.2 to 1.3 (after being prompted to do so from launching itunes 7.0.1.8) it will not perform the suggested update offering up a cryptic message about the files on my ipod being in use by another program.
Now, if you have any constructive ideas, it would be appreciated...

Timesheet Approval Configuration - Fixed Approval Routing

Hello,
Currently our timesheet configuration is through chain approvals. Team member submits to their manager, manager does approval and sends to me (timesheet manager). I have Fixed Approval Routing unchecked, as I would like for the Manager to be able to select
me as manager to approve. However, after unchecking Fixed Approval Routing, it doesn't seem to pop up for managers to select me as the timesheet manager. They just get the dialogue box to click OK when approving. Is there a configuration I'm missing? I tried
this for every manager by delegating and it seems it just goes directly to their timesheet manager without having a message to send to. Previously, it would work fine, but after a few configuration tweaks it stopped popping up to select timesheet manager.
Johnny Eltawn, Project Server Admin

For Project Server 2013, Try following:
Add yourself in the "Timesheet Managers" list, which can be set under "Server Settings" -> "Timesheet
Managers"
Update Team member and make yourself as "Timesheet
Manager"
thru "Manage User" or thru "Resource Centre."
Update following setting on "Server
Settings" page, in the "Time and Task Management"
section, click "Timesheet Settings and Defaults"
Select the "Fixed Approval Routing" check box.
Under "Task Status Manager Approval", choose "Enabled" if you want managers to be able to approve individual
timesheet lines. You can also choose to "require line approval before timesheet approval."
Hope this will help you.
Raushan Kumar |
LinkedIn

Airport Drops and Freezes---- Finally Fixed!

Ever since I bought my MBP in July, 2009, I have had trouble with total freezes and airport drops.
The fixes by Apple:
1. New hard drive, battery, keyboard, logic board
2. Problem persisted-- new logic board
3. Problem persisted-- heat sensor was missing the sensor part
4. Problem persisted-- Genius said it was 3rd party software
5.Problem persisted-- local Apple certified repair shop had no idea
6. Problem Persisted-- in the meantime I had done several erase and install. It froze up every time I installed SL
7. Problem persisted and I took it to Apple Store last week in one last final try. After hours of testing, it froze for them. They ordered new hard drive and logic board. Then the tech noticed it freeze and dropped the internet. He checked one of the logs and saw that the airport card had lost power just before the freeze.
He replaced the airport card and it is finally fixed-- the first time since July, 2009.
So if you have freezes and airport drops, be sure to check the airport. The airport was never changed when the logic board, et.al. were replaced.

Wow! I would think replacing the airport would be the first step in this madness.

Vista - Sleep FINALLY fixed, still annoying Random Shutdowns

Ok, they FINALLY fixed it so the Mac Pro wakes from sleep in Vista RC1 with the recent EFI update, now they need to fix the Random Shutdowns. These occur as if you were telling your system to shutdown, I do not suspect the power supply because it is not an abrupt power loss, it gracefully shuts down, but of-course is annoying as h3ll...
Here's looking forward to the Leopard/Vista releases when all of this should be worked out!
SH
Does Vista RC2 run any better? Have better Bluetooth support?

... well... that was really a (slap in face) help ??
I never tried sleep or hibernate, but I read the latest RTM had some fixes in there regarding better support now for laptops and sleep.
Ignorance is bliss perhaps? or, it is a mixed world? or, there is still software that is not available...
How about, curiosity? that's always been man's greatest strength, too.
Being able to run Windows Vista on Mac Pro must be something even Apple engineers are keep to do and improve on.
Every release for OS X takes a couple updates to be "ready" for use. Long-term that has meant 2-3 updates for the last three+ releases, and each release meant more work for everyone, developer and end user, while "rules" change and hardware and software has to be updated to accommodate those changes. Even good changes are still costly, and some have been costly.
I've lived and survived FIVE releases, $600+ for one machine license, and over a year of that was "1.0" issues all over again. And the same story will get played out next year, too, bet on it.
Some people like to explore linux and alternatives. I have, and while I've never felt linux offered the desktop experience I want, I thought SuSE 6.4 gave OS 8/9 a real run for the money at the time.
Things to Love/Hate about Vista
I can now help my Dad 1200 miles away with his PC Windows w/o needing a PC. I can run multiple VMs. One computer, multiple OSs. VMware, Parallels, CrossOver, as well as native installs.
And maybe, just maybe, a more secure desktop PC will help everyone. However, a really good balanced review might actually be one from ComputerWorld - Vista may make Mac converts of IT folks!
IT folks can support XP/Vista and be running Mac OS X
ComputerWorld article

ACR 4.4 *FINALLY* fixes magenta reds under tungsten light! Yeah!

Adobe has FINALLY fixed the ugly reds that were always too blueish when shooting in tungsten light and correcting the WB! Hurray! Took them 5 years almost! Before 4.4, no matter how much I calibrated by shooting a CC under tungsten and doing it via the book, it never looked correct.
Now can they please do this for the daylight profile as well? 1/2 way there!
I know all about the calibrations and have done them with the CC card, but the reds were always a problem in ACR. Obviously Adobe realized this as well when fixing it in 4.4 for tungsten - they said extreme ends of the color temperature scale.
So IMO, they can also fix the reds (without having users do ridiculous calibrations that ALWAYS yield negative hues for red and a LOT of saturation for RED) in daylight!
Pretty please!

Hi Thomas,
I went back to look at the tungsten/available light photos, and most are in the mid 2000Ks. The reds look spot on to me with the 4.4 profiles.
Here's a shot (saved/embedded as sRGB) of a CC taken with a 1DMKIII and then processed in ACR (just WB correction) with the 4.1 and 4.4 profiles. Look at the difference. I'm going by look - not numbers. The 4.4 looks better/more accurate on the reds and other patches too. This is very apparent when shooting clothes, real life objects, etc. that have those hues. 4.4 looks great. In this example it's 2400K +3 (the only ACR adjustment was to WB click on the 2nd patch on the bottom row - 2nd from left). Is this not what was meant by the fix at the extreme ends in the 4.4 release notes? But I also understand the each camera has a 2 profiles - one of which is tungsten. And until now, I had to fuss with the reds. Now I don't! Love it!
4.1
http://homepage.mac.com/bogdan_urma/misc/4-1.JPG
4.4
http://homepage.mac.com/bogdan_urma/misc/4-4.JPG
Here's another example from the 5D. I know the hue of the pillows since I own them :) 4.4 looks accurate and 3.3 way off. Look at the EXIF to see the differences. Again, only correction in ACR was click WB.
3.3
http://homepage.mac.com/bogdan_urma/misc/3-3-pillows.JPG
4.4
http://homepage.mac.com/bogdan_urma/misc/4-4-pillows.JPG
Bogdan

How to fix a router needs to be reset every morning?

I just purchased a new WRT54G V8.0. I upgraded to 8.0.0.2 and set up my network. I have 3 wireless devices and one wired device. The wireless devices are the Desktop, the Laptop, and the Wii console. The wired device is the Xbox.
My problem is this... The network works perfectly all day, no problems what so ever except every morning the router has to be reset and I can't figure out why. Any ideas on how to fix this??
Wireless is set up for DHCP using WAP-PSK with TKIP auth and MAC adress filtering. Everything connects and work fine throughout the day but every morning it needs to be reset.
Thanks.
Message Edited by DaveW on 08-24-2007 08:46 AM

already tried that. the problem is that the router won't assign an IP. Even on the wireless machines, the router shows up as available. I can even connect to it, the problem is it won't assign an IP. I've reset the preferences for the wireless connection, including the WAP key then attempted to recconect. I still couldn't get an IP.
This morning I just reset the router without playing with any settings on the computers. After resetting the router I attempted to reconnect. It asked me to enter the WAP key again, so I did and it connects perfectly.
It's not a huge problem I suppose... but it's really annoying to have to reset the router every morning.

Finally Fixed! Oracle 11g XE 'Get Started' Page (but it won't start) Error

OMG--I JUST FIXED THIS!!
I've been looking for days on these posts and saw a lot of frustration and finally got it.
I'm coming from your 'average guy' approach, so I don't get all super technical stuff, so...
I just read the message on my IE explore page when it couldn't load it, and under 'More Information' drop down, it said...
(my paraphrase)
'The possible problem with your internet connection is'
...(and somewhere down the line)
- GO TO Internet Explorer TOOLS, INTERNET OPTIONS, ADVANCED TAB, and under the SECURITY heading, make sure the...
[X] SSL 2.0
[X] SSL 3.0
[X] TSL 1.0 boxes are checked
And I saw the Home page--AHH HAAAA!
Anyway, Hope this helps you guys!!!
Don's 3D

Hi Paul,
I was convinced with you ans. And i tried by enabling the Local LAN option in VPN.
But all vain... Its working off the VPN but not on.
And I did something: installed old 10g XE and guess what! its working perfectly fine. I don't even need to change the port.
For the time being work is being done. but i'd love to know the reason n case with 11g.
any points?

Need help fixing my router: WRT54G

I just got rid of Vonage and went back to this router. I tried puting in some firware and now everything is screwed up. I have no access to 192.168.1.1 to make any changes. Is there a way to clear everyhting out of the router and start over.
Message Edited by billyball on 07-19-2007 10:43 AM
Message Edited by billyball on 07-19-2007 11:03 AM

Things might not be as bad as it looks. This screenshot typically occurs when your browser is not getting a full connection to the router. Try the following:
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall. If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.

Nested Sequences Bug is finally fixed?

I just noticed that Apple seems to have patched a significant bug in FCP with the last update.
According to my own tests, Nested Sequences now update automatically and consistently without having to be re-added or refreshed in the timeline.
Nesting is when a sequence is placed into another sequence. Complex projects may involve several layers deep of nesting, but FCP users have been wise to avoid this useful technique because it just didn't work right.
For example, if I were to build a neat animated logo sequence, then nest it inside a standard footage sequence, the animation would play through and be scalable like any other footage. This allows for a simpler "master track" timeline based workflow where everything is not placed into the same huge sequence.
In the past, the sequence containing a nested sequence would not get updated if one made a change to the nested sequence after placing it. So if I were to change the animated logo sequence mentioned above, the change would not show up in the footage sequence that hosts it. I believe this has finally been fixed in 5.04
The nested sequence bug is a very old issue that dates back to version 1 of FCP and has been a real problem for me because of my high-volume workflow. I've been reporting the problem at Apple's feedback site and it appears they finally listened.
Why nest? Nesting is also very useful when format converting or adding letterbox, etc. I mostly use nesting because I have 100's of TV commercials that are identical but use different phone #'s. For this I nest the nearly completed spot into new sequence where the phone number is added. I can then have 100's of sequences that only contain the stuff that changes. I don't have time to explain why this works better than just rendering the master track for me, but it does.
Has anybody else noticed this fix, or am I just dreaming here? I really am excited about this.

It was fixed as I described until about a month ago, when I noticed the problem was back. This could have coincided with an OSX update. It also might have been the update to QuickTime or Pro Applications Support as well. I don't know. But the problem is back and I noticed it "the hard way" during a dub. Sorry for not amending my post when I noticed this.
This is a problem that Premiere and Avid users NEVER experience, FYI. It is a critical bug in my opinion. I believe Apple could fix this with just a few lines of code, but it seems like it just isn't on the priority list. We need to get busy with the Apple Feedback forum requesting the a fix (again). Please everybody that reads this should post a request at that forum for a fix. Thanks!

The way I finally fixed my iTunes 6!!!

Well, I have had trouble since version 5, and now I fixed it! At the moment I am downloading an episode of Lost on iTunes!!! Here is how I fixed it.
When I installed, we found it was the Quicktime that messed me up. I couldn't get version 7.0.3 to install. So after tons of troubleshooting, I downloaded the Windows Installer Cleanup Utility (http://support.microsoft.com/kb/290301/) and erased Quicktime. Then I tried it again. No problems!
It worked for me, but I know everyone is different. If this does work, please say, so we can get the Apple people to fully erase the older versions of Quicktime!
Adam

You can only patch a router so many times before patching becomes useless.
Sounds like you are trying to argue that you should be able to keep a router around for 5 plus years even though hardware and software standard have grown beyond what an old router can handle.
Anyone here still using their Router that only supports A and not b and g?
I think not i can sqee myself replacing my fantastic d-link extreme N within 2 to 3 years by then it would be a 6 year old router....... Do you have to upgrade new hardware? Well look at the support life cycle of the company that made it.... If they are no longer offering patches for old hardware then it means more than likely it is no longer in active support...... Support anyway in most companies is 2-5 years anyway and your argument is that you want to go up and beyond squeezing that turnip..... If so then go to open source soft mod websites for your router

Finally fixed my Router

Similar Messages

Maybe you are looking for