Financial reporting login page

Hi All, we are having system 9 and I havefew basic questions. hope you can help me in this regard. 1. AFAIK, there are four instances of Hyperion servers, a) HFMconsolidations b) Hyperion Planning c) Hyperion FInancial Reportingd) Web Analysis studio. I didnt understand, why the login page ofall these applications of the same product is implmented usingdifferent technologies... for example, HFM is implmented inASP, Planning in JSP and the other two (Hyperion FinancialReporting and Web Analysis studio) are bindows applications. Why isit so, any idea? 2. I dont want to use bindows application for logging intoHyperion Financial Reporting instance. is there any other userinterface through which i login, if so, could you please let meknow the URL or should i configure somewhere in hyperion server todisable BINDOWS. I woul really appreciate if you can help me in this regard. ThanksReddy

All Applications you mentioned have web interfaces ( You can look in admin guide for URL). Planning and HFM have Windows Interfaces to Perform Admin Tasks (Create applications, sync data etc etc) Jay

Similar Messages

Financial Reporting: Suppress pages for large sparse dimension combinations

Hello,
I am trying to create a Financial Reporting report that shows only pages that are populated with data, but the dimensions that I have on the page are fairly large and very sparse. There are 8,000+ combinations of sparse members, only of which about 120 have data populated and those 120 are what I want to return on my report. I can't call out the page member combinations individually as new combinations appear regularly and I want to avoid running maintenance on the report definition each time the data in the cube is refreshed. My report isn't executing, so I suspect it is running for each of the 8,000+ combinations before determining whether or not it should render each particular page. Does this behavior sound right? If so, is there a workaround or some other trick to get Financial Reporting to test for the presence of populated combinations before rendering the pages?
Any help would be much appreciated!
Thanks,
Rob M
Synapse Group/Time, Inc.

You can achieve this by doing following:
1. Open report
2. Select grid (left top corner)
3. On 'Properties' window, select suppression
4. Select '#Missing' in 'Basic option' section.
Good luck & let me of the results.
Venu

Hyperion Financial Reporting Studio - Page Axis Dimension Prompt

I have added two dimensions to my page axis of a report. I want to be able to prompt for members for both of these page dimensions. When I double click on "Page:" to be able to setup the prompt I am only able to prompt for one of the dimensions. I am not able to select the second dimension and then setup the prompt for that dimension too. Has anyone else seen this?

This is going to be trial and error on your part until you get the results.
1. If you un-check both fit-width and fit-length, is it going to two pages in width or lenght?
2. If is going second page in width wise, only check fit-width and keep un-check length.
3. Try the same for length.
Venu

User login records on Hyperion Financial Reporting

Hi all,
We understand we can turn on audit to capture the user login (authentication) in Hyperion Planning. Can we have the same option/feature for Financial Reporting to turn on audit so that we know that which reports in one day was generated by end users?

jts wrote:
I think so..take a look at what I found below on page 301 of the financial reporting user guide under the administrative tasks section, report server tasks subsection:
Log File Output Management
Financial Reporting uses the log4j logging mechanism to manage log file output. Logging
settings can be configured and are set in the fr_repserver.properties file for each Financial
Reporting server component.
This code is an example of Financial Reporting Server default settings in the
fr_repserver.properties file. Settings you might modify are shown in bold text.
# log4j.rootLogger=ERROR,dest1
# log4j.appender.dest1=org.apache.log4j.RollingFileAppender
# log4j.appender.dest1.ImmediateFlush=true
# log4j.appender.dest1.File=C:/hyperion/BIPlus/logs/FRReportSrv.log
# log4j.appender.dest1.Append=true
# log4j.appender.dest1.MaxFileSize=512KB
# log4j.appender.dest1.MaxBackupIndex=5
# log4j.appender.dest1.layout=org.apache.log4j.PatternLayout
# log4j.appender.dest1.layout.ConversionPattern=%d{MM-dd
HH:mm:ss} %-6p%c{1}\t%m%n
Note:
See fr_global.properties for details on logging levels (FATAL, ERROR, WARN, INFO,
DEBUG) and formatting options. The Financial Reporting logging settings can be changed
without restarting the servers. The .properties files are monitored for changes to the logging
setting every minute. The frequency is set in fr_global.properties. This can be very handy
if you want to set the logging levelThanks a lot! So the login/logout information will be captured in which log file?

Financial Reporting 11.1.2.507 - pages from a report

Hello,
I was designing a report on Financial Reporting Studio, but dimensions from pages are shown separates by commas in only one combo box. What I need is to have one combo box per each dimension.
Please, We will appreciate your valuable response.
Edward

Hi Neeraj,
What you mencion is refering to "columns" section, but I am refering about "page" seccion on the grid. Maybe I can send you an email with the print screen. Please check this link http://oi47.tinypic.com/35hpmoi.jpg
Edward
Edited by: user9048308 on 23/08/2012 09:03 AM

How to repeat row header in all pages in Financial Reporting?

Hi,
I have created a simple Financial Report with landscape mode, I could not able to view the row header in second page. Please help me out , how to repeat row header in all pages?
Edited by: Awesome on Dec 13, 2012 2:04 PM

Hi,
Refer following link which states how to change the Page Setup setting (just an addition to above poster's explanation):-
http://docs.oracle.com/cd/E12825_01/epm.111/fr_user/frameset.htm?1900.html
Regards,
Edited by: 918547 on Dec 14, 2012 6:17 PM

There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles and no errors reported.

There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. Local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles, I get no further and no errors reported. Safari, Opera and Firefox. Deleted cookies and chain but still no action.

If you have not already done so, read the router's user manual troubleshooting section and/or contact its customer service department/forums.
If still having problems, post back w/details of all you have tried to resolve the problems along w/the troubleshooting solutions that the "local techies" had you try.

Financial report studio login error

Hi,
while logging in to Financial report studio i am getting this error
Could not connect to server : Server name
please make sure that the server is running as specified in the logon dialog(including port number if not default)
can any 1 help me in this ??????

Hi Andreas,
Thanks for the reply,
i have checked those two services , and they are running...
i am logging in with user id as 'admin' pwd as 'password'
and the server as my system name..
is it correct ?
any other help regarding this issue ........

Error while running the financial report in the workspace.

Hi,
Im getting the below error while running the financial report in the workspace in HTML mode.
*"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
*"You are not authorized to use this functionality. Contact your administrator"*
Can someone let me know how to resolve this error.

You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
http://workspaceServer:19000/hr/status.jsp
http://frWebAppServer:8200/hr/status.jsp
Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers.

Custom Error message in Login Page

Hi,
I am using MVC framework for my project. I want to display custom error messages to the user in the Login page(JSP).
For eg: invalid password, password has been expired etc. How do I pass these messages from Java to my login page & display it?

This is a sample action class for login page in struts : -
package xxx;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.ActionError;
import org.apache.struts.action.ActionErrors;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import LoginForm.java;
public class Action extends org.apache.struts.action.Action
public ActionForward execute(ActionMapping mapping, ActionForm form,
HttpServletRequest request, HttpServletResponse response)
throws Exception {
ActionErrors errors = new ActionErrors();
ActionForward forward = new ActionForward(); // return value
String username;
String password;
try {
LoginForm lf = new LoginForm;
username =lf.getUserName();
password = lf.getPassword();
if( username== null)
forward=mapping.getInputForward();
if( (username == "admin" ) && ( password="admin"))
// do something here
} catch (Exception e) {
// Report the error using the appropriate name and ID.
//Errors will be caught here.
errors.add("name", new ActionError("id"));
// If a message is required, save the specified key(s)
// into the request for use by the <struts:errors> tag.
if (!errors.isEmpty()) {
saveErrors(request, errors);
// Forward control to the appropriate 'failure' URI (change name as desired)
// forward = mapping.findForward("failure");
} else {
// Forward control to the appropriate 'sucuess' URI (change name as desired)
forward = mapping.findForward("success");
// Finish with
return (forward);
You need to have LoginForm.java as Model and Login.jsp as View . Action.java will be your controller.

ADF Application and Oracle Portal Login Page

We have developed ADF application and deployed it in Oracle AS 10.1.2 along with the custom JAAS module, which is working fine with the application custom login page. As a next page, I want to use Oracle Portal login page for the authentication and authorization.
How can I accomplished it? Any idea?
Thanks,
AP

Shay,
1. I created blank ADF project
2. I copied myreport.jsp file (this one was generated by Oracle Report Builder) under ..ViewController/public_html directory
3. Created directory 'lib' under ViewController/public_html/WEB-INF/lib
4. Copied reports_tld.jar file under the directory created in 3.
5. Created simple jspx page with the af:link (btw af:goLink does not exists in JDev 12c), set 'destination' to myreport.jsp
After the steps above I could not even compile the application, many problems too many to list here, Basically JDev is trying to build the project with .jsp file generated in Report Builder and is unable to.
So to be sure we are on the same page: I am trying to embed JSP report files generated by Report Builder into ADF project, then create EAR file and deploy on standalone WLS. Finally execute JSP web only report.

11i Login Page is showing 'Error on Page' while using IE 7

Hi DBAs,
I am using Oracle 11.5.10.2 with DB 10.2.0.4 (Single Instance). The EBS is on RUP6 and using JDK 1.6.0_12.
I was using Firefox and not getting any issue. I used first time IE-7 (7.0.5x) to access the application. I noticed that Pressing the 'Login' button on Login Page , it was saying in the left bottom of the IE says 'Error on page' and was not navigate to any page or did not perform any action.
I verified all the services and everything was OK. While using Firefox , I was able to navigate the application w/o any issue.
Using IE 7 , I am able to access
http://host.domain:8000/OA_HTML/fndvald.jsp?username=sysadmin&;password=sysadmin
Most of the stuff seems to be working fine while logging in using above URL but the 'GO' buttons are throwing same error in IE 'Error on page'. Rest of the Bottons like 'Edit Navigator' , 'Edit Favorites' are working fine but when on any Page I press the 'Go' button then IE showing Error. It seems to me that when a button need to navigate to next page then IE saying 'Error on page' but when a button have to lunch a new page it is working fine.
All the responsibilities and links are working fine. Application Navigation using Firefox is working absolutely fine.
Seeking your advise and suggestions to resolve the issue.
Thanks
-Samar-

Hi Samar,
You can clear the cache as follows (login as applmgr user, and source the application env file):
$ cd $COMMON_TOP/_pages
$ rm -R *
ML Note: 285218.1 is not helpful as I am on later version of EBS (11.5.10.2 with RUP6 and Developer6i Patchset 19). At Client side I am using Windows XP SP3 with IE 7.0.5.x with JInit 1.3.21 and JRE 1.6.0.12.Did you review the steps under "Recommended MSIE Browser Settings" section?
Can you reproduce the issue with JInitiator? If yes, any errors in the JInitiator console window? Enable debug (you may also enable trace for Sun JRE) and see if any errors are reported there.
Note: 549423.1 - How to enable tracing and logging for Sun JRE (Native Plug-in)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=549423.1
Regards,
Hussein

How do I create a GL responsibility to access multiple ledgers (error trying to run Financial report submission)

I created a new GL responsibility and used the same menu as an existing one but created a new data access set that has all the ledgers in it that we want to access.
I left the following profile options with no value. The reason being is this responsibility should not be tied to any org/ledger.
MO: Operating Unit
GL Ledger ID
GL Ledger Name
This all seems to be working fine except when the users try to access Financial Report Submission. The error that appears when trying to choose a ledger when running the report.
Error: Stale Data
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example).
I have cleared the browser cache and cache was cleared by functional administrator. In this case it really doesn't seem to be anything to do with the browser's back button being used (I didn't use it) since I can make this error go away by setting the value for GL Ledger Name. But that is not what the users want since that will restrict them to a specific ledger but they should be able to run the report for any ledger.
Any help would be much appreciated.
Thanks

Please see (RM: Financial Report Submission: Errors With Stale Data, View Object FSGSubmissionAM.FSGSubmissionPVO1 Contained No Record [ID 1099837.1]).
Thanks,
Hussein

ASA Clientless SSL VPN can't access login pages on websites

When I'm doing a clientless SSL VPN to my ASA and using the ASA to browse websites, I can pretty much go on to just about any website except specificly login websites. I can go on google and yahoo but when I click the "mail" button it just gives me an error message "Connection Failed - Server (site name) unavailable. When I go onto hotmail.com, it says server hotmail.com unavailable. When I browse by entering hotmail's IP address in, it says "Bad Request." Same happens on ebay, youtube, etc. Funny thing is, the ONLY login page I can get onto is Cisco's website's login page. I tried changing DNS servers, nothing changed. Here is my configuration:
show run
: Saved
ASA Version 8.4(4)1
hostname PatG
domain-name resolver4.opendns.com
enable password aDvdtQE/ih5t061i encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa844-1-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group Comcast
name-server 75.75.75.75
domain-name cdns01.comcast.net
dns server-group DefaultDNS
name-server 208.67.220.222
name-server 208.67.220.220
domain-name resolver4.opendns.com
object network obj_any
subnet 0.0.0.0 0.0.0.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-649-103.bin
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Remote1 protocol radius
aaa-server Remote1 (inside) host 192.168.1.8
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console Remote1
aaa authentication http console Remote1 LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd domain redtube.com
dhcpd auto_config outside
dhcpd option 150 ip 192.168.1.15 192.168.1.5
dhcpd address 192.168.1.5-192.168.1.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
tunnel-group-list enable
group-policy Eng internal
group-policy Eng attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value EngineerMarks
group-policy RemoteHTTP internal
group-policy RemoteHTTP attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value Test
customization value Extra
username user1 password mbO2jYs13AXlIAGa encrypted privilege 0
tunnel-group Browser type remote-access
tunnel-group Browser general-attributes
authentication-server-group Remote1
default-group-policy RemoteHTTP
tunnel-group TEST type remote-access
tunnel-group TEST general-attributes
authentication-server-group Remote1
default-group-policy RemoteHTTP
tunnel-group TEST webvpn-attributes
group-alias testing enable
group-url https://24.19.162.53/testing enable
tunnel-group Engineering type remote-access
tunnel-group Engineering general-attributes
authentication-server-group Remote1 LOCAL
default-group-policy Eng
tunnel-group Engineering webvpn-attributes
group-alias engineering enable
group-url https://209.165.200.2/engineering enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect http
policy-map map
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
password encryption aes
Cryptochecksum:843e718c8d4b23b5f421f82fc0a0c255
: end
Can anyone please help me? Thanks

In your crypto ACLs for the site-to-site tunnels, add the ASA's public IP destined to the remote network, and mirror this ACL on the remote end VPN device.
Example:
ASA public IP: 2.2.2.2
Remote network: 192.168.1.0/24
access-list vpn_to_remote_network permit ip host 2.2.2.2 192.168.1.0 255.255.255.0
Mirror the above acl on the remote end router.
PS. If you found this post helpful, please rate it.

How to insert an username from the login page to the form page

Hi friends,
I created one database apex application in which it consist of three pages...
1)login page----->1
2)form page along with report page(in same page) i.e. i created a report region within a form region
3)form page(this page appears when i click the edit option in my previous report page
(i.e.) my 3rd form page depends upon my 2nd report page, as soon after i click the edit option of each and every row in my report which is in 2nd page it has to go to the corresponding 3rd form page for making an updations in each and every row...
I have created my above listed applications....
But the scenario for me is since the login page contains two fields, that is
user name:
password:
so i will be giving my name in the user name and also respective PW for accessing to my 2nd and 3rd page in my application...
Since my 2nd form page consist of following fields like
*) user name---------->
*) assigned to
*) status
*) start date
*) priority
so my requirement over here is soon after i logging into my application through the user name and PW into second page, while coming to the second form page
my user name field in my 2nd form page has to get inserted automatically with the user name that i have entered in the login page...
example: my user_name in login page is :harry
after going into the second form page with the user name "harry"
the field of my 2nd form page "username" has to get automatically generated with the name "harry"
Whether it is possible friends to do this in my application....i doesn't have any idea of it...Kindly help me friends to solve my scenario...please explain each and every steps in detailed manner...
Since the user_name: harry, is of I got from the admin side as a developer for the workspace......
Thanks in advance
Harry....

Hi Karthik,
I made the following changes that you said, but there is just a one change in it...
You told these changes
Source Used: always, replacing any existing values in session state.
Source Type: Database column
Source value or expression: (respective column name)
and in Default: u need to give-----> &APP_USER.(exactly the same including the full stop)....
Thanks for your help Patel....I just worked and inserting for me in table of the corresponding user name who login.....

Financial reporting login page

Similar Messages

Maybe you are looking for