Find condition type (kschl) for a particular material document no (mblnr)

hiiiiii
How to find condition type (kschl) for a particular material document no (mblnr).

Hello,
<b>Check the table A017 and KONV.</b>
Vasanth

Similar Messages

  • Making condition type mandatory for a particular po document type

    I have 2 po document type namely local po and international po. i want a particular condition type ZLCS to be picked automatically as soon as the user picks the po document type.

    Hi,
       You may check the condition technique through a new condition table with PO document type. You may proceed as below:
       You may append the standard MM condition structure to include the PO document type field (in structure KOMPAZ), with the help of abapers . Add the field to condition catalogue in the path: OLME - Conditions - Define Price Determination Process - Extend Field Catalog for Condition Tables.
        Now, you can create condition table with document type field in M/03. Maintain the condition table in the access sequence in M/07. Assign the access sequence to condition type in M/06. Include the condition type in pricing procedure. Maintain condition record for the condition type with required document type in MEK1.
        Check the procedure and revert back in case of any doubts.
    Regards,
    AKPT

  • How to find condition  type for a particular material document no.

    hiiiiii
    How to find condition type for a particular material document no.

    Hi
    Condition types are maintained at PO level
    Take the EKKO-KNUMV and pass to
    KONV-KNUMV field and take the different condition types values from KONV
    Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
    see the table T685 for different condition types.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Where can i find the Datewise stock for a particular material

    Hello friends,
    In which table i can find the stock of a particular material on particular date?.MARD, MCHB these all tables gives the current stock of material.But i want to find the stock of material on particular date.In Report MB5B and MC.9 we can find the stock on particular date but is there any table from where these reports fetch the data?
    Thanking you guys in advance.

    Dear Jitendra,
    Check once again in this thread whether are you able to find out some help.
    But I'm sure MB5B is not getting the info from a single table,it's getting the information from info
    structures and few tables.
    table to see stock on particular date
    Regards
    Mangalraj.S

  • Condition Types used in a particular country

    Hi Experts,
    I am trying to pull a report of changes made to the condition types using VK13. Before doing this, I would like to know what are the condition types used for a particular country. How can I find out the condition types used for a particular country. Please advise.

    Hi Murukan,
    As above said we will not maintain condition record for country,until we select the country in our access sequence.
    You know the changes made to condition type by the table CDHDR and CDPOS
    go to SE16N give the table CDHDR there in TCODE filed give VK12 you will get all changed information regarding that and get the
    value in filed CDHDR - OBJECTID pass the same into CDOPS - OBJECTID you can get specific record information.
    Check and revert
    Regards
    Ram

  • How to find condition type for a material???

    How to find condition type for a material??

    Hi Suman.
    Refer the following
    tcodes:http://www.tcodesearch.com/sap-tables/search?q=condition+types
    and http://wiki.scn.sap.com/wiki/display/Snippets/Get?original_fqdn=wiki.sdn.sap.com
    Please search for condition type with pricing condition/pricing procedure.
    Regards,
    Kannan

  • How to find the corresponding programs for a particular condition type

    Hi experts,
    I have one condition type( KSCHL ).
    I need to find the programs where this condition type is used.
    Thanks in Advance.

    Dear Nagireddy,
    You have to go further by using where-use list option(Arrow Direction Icon) from SE11 or from SE38 editor. Then the system will show you the places where the condition type KSCHL is being used.
    Thanks & Regards,
    Dinesh

  • Restricting Purchase order for a particular material type

    Hi All,
    How do I restrict a purchase order document type to be created for a particular material type.
    For eample PO document type NB should allow to create for materials with the material type ROH only and restrict the other material types by issuing an error.
    Many thanks in advance.
    Regard,
    Ravi

    Hi Ravi,
    This is not directly achievable in std. You will have to implement the check in a user exit, e.g. the BAdI ME_PROCESS_PO_CUST method PROCESS_ITEM.
    But why this strange reqmt? Maybe there's another solution whuch would keep you in std?
    BR
    Raf

  • Default VAT 4 % for 1 particular material group

    My client wants to default VAT 4 % for 1 particular material group...It means if i create PO for that particular material belonging to that material group  it should fetch VAT  4 % default.
    How to map it?

    Hi,
    For the VAT condition type, maintain access sequence with the field material group and then create the tax condtion using FV11 for the said material group with 4% tax rate. All subseqent PO's created with that particular Material Group will automatically calculate VAT with 4% based on the conditon record, Pl check
    Regards
    Merwyn

  • Material master extension for a particular material

    hi everyone,
    i got a requirement to add a customized screen for a particular material, i designed the screen and added that by going into spro. the screen is viewable now but for all materials. so could anyone tell me how to make it visible only for a particular material type.
    Thanks heaps
    Surya

    Hi mate
    double click the material type in T.code oms2 and higlight the view in user department so it will be displayed in the material master creation,if not deselect the item so it wont be available in MM01 .
    Hope this helps
    cheers
    Chellam

  • Conditions we go for a particular dimension as high cardinlity?

    Hello SAP Gurus,
    Under which conditions we go for a particular dimension as high cardinlity?
    Any pratical scenairos you have faced in the project?

    Oye Lucky ,
    Line Item Dimension: We will go for Line Item dimension when there is only one character in the Dimension.If you tick on the Line Item Dimension no table will be created for this Dimension.
    For Example:Consider there is an Document number in the Line Item Dimension for this Dimension there will not be any table created but it will reconize based on the ID's so it will improve the performance.
    High Cardinality: We will go for high cardinality when there is more number of Info Objects. i.e more then 20% of the Fact table entries.The reason why we go for the High cardinality is it will convert the type of search criteria i.e when you go for normal dimension it will be bitmap (this is good for smaler dimension) when you for Cardinality it will be B-Tree Index(good with large number of attrcibutes).
    Regards,
    Shiva Kumar G.C

  • Condition type table for mm

    hw to get a condition type table for mm?i
    i want to get the records from eban,ebkn,esll,esuh, and some more fields (service currency,service condition type,service price and service price unit) but the functional consultant people dnt know wr these 4 fields are? i have got records from eban , ebkn ,esll
    and esuh.but i dnt know hw to get the another four fields .i m doing report for mm module.these four fields are condition from condition table .

    Hai Safi,
       U compare Tables Ekbe-Knumv , Ekko-Knumv , From Table Konv-Knumv
    U will get all the condition types(Kschl) But Konv is a  Cluster Table U have to write Seprate Select query.
    Reward Points If Usefull,
    Thanks & Regrds.
    Shiva .

  • Condition type used for scrap

    hi,
    what is the condition type used for scrap in Standard SAP.?Assured points
    Best regards,
    R.Srinivasan

    Dear Srinivasan
    Follow the below process:-
    1)  Go to V/06, either copy the standard or create a new by naming ZTCS and maintain the following:-
    -  Cond. class::::::::::A
    -  Calculat.type::::::::A
    -  Access seq.::::::::::K004
    -  Manual entries:::::::D
    -  Item Condition:::::::X
    -  Text DetPrc::::::::::04
    2)  Again in V/06, create one more condition type (say ZECT) for Edu.Cess on TCS for which the same values can be maintained as like ZTCS
    3)  Go to OV34, create an Account key for TCS, say ZTC and ZET for Edu.Cess
    4)  Go to VK11, input the condition type ZTCS and maintain the required TCS percentage (the combination which you can maintain is for Sales Org / Dis.Channel / Material or as per the requirement demands you).   Similarly, you have to maintain the required percentage for Edu.Cess also in VK11
    5)  Now go to V/08, create a new pricing procedure exclusively for scrap sales and maintain these two condition types there with respective Account Keys
    thanks
    G. Lakshmipathi

  • How can i find the exact BADI For a Particular Transaction

    hi ppl,
    How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

    Use this code:
    *& Report  ZGET_BADI
    REPORT  ZGET_BADI.
    TABLES : TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA wa_tadir type tadir.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    *Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    *Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    *For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    endcase.
    Regards
    Vinayak

  • To find the User Exits for a particular Transaction.

    hi,
        I want to find the number of User Exits for a The Transaction MM01 or MM02,
        I serched in the forums but could not find satisfactory ans,
        I tried with:
                 T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
        But its not helping me,
        Please help me.
    Thanks and Regards
    Suraj S Nair.

    hi ,
    if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
    create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
    Finding the user-exits of a SAP transaction code
    * Finding the user-exits of a SAP transaction code
    * Enter the transaction code in which you are looking for the user-exit
    * and it will list you the list of user-exits in the transaction code.
    * Also a drill down is possible which will help you to branch to SMOD.
    * Written by : SAP Basis, ABAP Programming and Other IMG Stuff
    *              http://www.sap-img.com
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    Regards,
    Prabhudas

Maybe you are looking for