Find matching records from two tables, useing three key fields, then replace two fields in table1 from table2

I have two tables - table1 and table2 - that have the exact same schema. There are three fields that can be used to compare the data of the two tables, field1, field2, and field3. When there are matching rows in the two tables (table1.field1/2/3 = table2.field1/2/3)
I want to replace table1.field4 with table2.field4 and replace table1.field5 with table2.field5.
I have worked with the query but have come up with goobly goop. I would appreciate any help. Thanks.

If your field1, field2, and field3 combinations in these tables are unique, you
can do a join on them.
Select t1.field4, t2.field4 , t1.field5, t2.field5
from table1 t1 inner join table2 t2 on t1.field1 =t2.field1 and t1.field2=t2.field2 AND t1.field3=t2.field3
--You can update your table1 with following code:
Merge table1 t1
using table2 t2 on
on t1.field1 =t2.field1 and t1.field2=t2.field2 AND t3.field3=t2.field3
When matched then
Update Set
t1.field4= t2.field4
,t1.field5 = t2.field5 ;

Similar Messages

Need help to join two tables using three joins, one of which is a (between) date range.

I am trying to develop a query in MS Access 2010 to join two tables using three joins, one of which is a (between) date range. The tables are contained in Access. The reason
the tables are contained in access because they are imported from different ODBC warehouses and the data is formatted for uniformity. I believe this cannot be developed using MS Visual Query Designer. I think writing a query in SQL would be suiting this project.
ABCPART links to XYZPART. ABCSERIAL links to XYZSERIAL. ABCDATE links to (between) XYZDATE1 and ZYZDATE2.
[ABCTABLE]
ABCORDER
ABCPART
ABCSERIAL
ABCDATE
[ZYXTABLE]
XYZORDER
XYZPART
XYZSERIAL
XYZDATE1
XYZDATE2

Thank you for the looking at the post. The actual table names are rather ambiguous. I renamed them so it would make more sense. I will explain more and give the actual names. What I do not have is the actual data in the table. That is something I don't have
on this computer. There are no "Null" fields in either of the tables.
This table has many orders (MSORDER) that need to match one order (GLORDER) in GLORDR. This is based on MSPART joined to GLPART, MSSERIAL joined to GLSERIAL, and MSOPNDATE joined if it falls between GLSTARTDATE and GLENDDATE.
[MSORDR]
MSORDER
MSPART
MSSERIAL
MSOPNDATE
11111111
4444444
55555
2/4/2015
22222222
6666666
11111
1/6/2015
33333333
6666666
11111
3/5/2015
This table has one order for every part number and every serial number.
[GLORDR]
GLORDER
GLPART
GLSERIAL
GLSTARTDATE
GLENDDATE
ABC11111
444444
55555
1/2/2015
4/4/2015
ABC22222
666666
11111
1/5/2015
4/10/2015
AAA11111
555555
22222
3/2/2015
4/10/2015
Post Query table
GLORDER
MSORDER
GLSTARTDATE
GLENDDATE
MSOPNDATE
ABC11111
11111111
1/2/2015
4/4/2015
2/4/2015
ABC22222
22222222
1/5/2015
4/10/2015
1/6/2015
ABC22222
33333333
1/5/2015
4/10/2015
3/5/2015
This is the SQL minus the between date join.
SELECT GLORDR.GLORDER, MSORDR.MSORDER, GLORDR.GLSTARTDATE, GLORDR.GLENDDATE, MSORDR.MSOPNDATE
FROM GLORDR INNER JOIN MSORDR ON (GLORDR.GLSERIAL = MSORDR.MSSERIAL) AND (GLORDR.GLPART = MSORDR.MSPART);

How we relate two tables using foreign key(fk)?

hi to all,
what are the conditions has to follow to relate two tables.I.e.,
the two tables have same primary keys(pk). if we relate these two tables in one table the pk and fk will be the same then how that table in active.

Hi
To relate two tables..we have foreign key relationship.
In one table v have primary key and in the second table, the same key is foreign key for that table..
To relate two tables, we can use JOINS
If there is already a suitable foreign key between two tables used in the view, these tables can be linked with a join condition from this foreign key.
Create a view on tables TAB1 and TAB2. TAB1 is the primary table of the view. TAB2 is the secondary table of the view. TAB1 is the check table for TAB2. The foreign key fields are assigned to the check table fields as follows:
TAB1-FIELD_A assigned to TAB2-FIELD_1
TAB1-FIELD_A assigned to TAB2-FIELD_1
The join condition of the view generated from the foreign key is then:
CREATE VIEW ... AS SELECT ... WHERE TAB2-FIELD_1 = TAB1-FIELD_A AND TAB2-FIELD_2 = TAB1-FIELD_B.
Join conditions can also be copied from generic and constant foreign keys. If a constant is assigned to a field in the foreign key, it is also assigned to the field in the join condition. There is no join condition for a generic relationship in the foreign key.
The foreign key between tables TAB1 (check table) and TAB2 (foreign key table) is defined as follows:
TAB1-FIELD_A assigned to TAB2-FIELD_1
TAB1-FIELD_B generic
TAB1-FIELD_C assigned to constant C
The join condition for the view generated from the foreign key is in this case:
CREATE VIEW ... AS SELECT ... WHERE TAB2-FIELD_1 = TAB1-FIELD_A AND TAB2-FIELD_2 = C.
Hope it helps
Reward if useful.

FETCHING VALUES IN MULTI RECORD BLOCK FROM ANOTHER TABLE USING SELECT STATEMENT.

Hi,
I have one multi record block in which i want to fetch values
(more then one record) from another table using select statement
IN KEY NEXT ITEM.I am getting following error.
ORA-01422: exact fetch returns more than requested number of rows
Thanks in advance.

In your case I see no reason to use non-database block and to try to populate it from a trigger with a query, instead of using the default forms functionality where you can associate the block and the fields with table, create where clause using bind variables and simply use execute_query() build-in to populate the block. The power of the forms is to use their build-in functionality to interact with the database.
Also, you can base your block on a query, not on a table and you dynamically change this query using set_block_property() build-in. You can use any dynamic queries (based on different data sources) and you simply need to control the column's data type, the number of the columns and their aliases. Something like creating inline views as a block data source.
However, you can replace the explicit cursor with implicit one like
go_block('non_db_block_name');
first_record();
FOR v_tab IN (SELECT *
FROM tab
WHERE col_name = :variable)
LOOP
:non_db_block_name.field1 := v_tab.col1;
:non_db_block_name.field2 := v_tab.col2;
next_record();
END LOOP;

DELETE THE MATCHED RECORDS IN DB2 TABLE

DELETE THE MATCHED RECORDS IN DB2 TABLE
sql server table sqlserver_emp(c1,c2,c3,4)
records:1 2 3 4
DB2 table db2_emp(c1 key,c2,c3,c4)
records:1 2 5 6 7 8
Both tables having same structure
Matched records : 1 2
1.Delete the matched records in db2 table : 1 2 (without using truncate option for DB2 in Anywhere)
2.Finally Load all records in sql server(Because duplicate records in db2 already removed so no duplicates occured)
3.NEED final OUTPUT AS:db2 table: 5 6 7 8 1 2 3 4
Note:
1.DB2 truncate doesn't used
2.STARING AREA: ORACLE
3.SQLSERVER AND DB2 CLOSED ENVIRONMENT DOESN'T USED AS STAGING AREA.
HOW MANY INTERFACES AND PROCEDURES SHOULD BE CREATE? WHAT ARE THEY?
HOW TO REACH MY REQUIREMNT?
Answer provider is more appricatable.
Thanks in advance.
Edited by: krishna on Nov 9, 2011 8:40 PM

1st option
See in this scenario you can use two interface and one procedure step.
1st interface-->poricedure-->2nd interface
1st interface will bring data to oracle staging-->then procedure will delete matched record from target using keys--->3rd interface will simple insert the the data in oracle staging.
2nd option
Insted of deleting the target matched records, you just update target matched record with latest records in your staging oracle.You can use IKM Merge
Thanks

How to find out the Non Partitioned Tables used 2Gb on oracle

Hi team
how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
regards

heres 1 I made earlier
set pagesize 999
set linesize 132
col owner format a25
col segment_name format a60
select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
from dba_segments
where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
and segment_type = 'TABLE'
having (bytes/1024/1024) > 2000
group by bytes, segment_Type, segment_name, owner
order by 4 asc

Query to find out the list of tables used in a package

hello,
can anyone please help me out with a query; i want to find out the list of tables used by a particular package.
thanks,
orton

orton607 wrote:
thanks for replying guys. But the thing is i am using dynamic sql execute immediate in my package, so i want those tables also and the schema name.
thanks,
ortonThis is not possible. The best you could do is to have a good guess.
Or how would you parse some dynamic statement as this:
   v_suffix := 'loyees';
   v_sql := 'Select count(*) from (select ''nonsense'' col1 from emp'||v_suffix||') where col1 = ''Y'''';
   execute_immediate(v_sql);
...What is the table name? How do you want to parse that?
Better rewrite all dynamic SQL statements into non dynamic ones. Or do the source control logic for those dynamic parts in an extra module. For example implement your own dependency table and force every developer to add there all dynamic parts.

Get FI Documet number from BKPF table using CO document number in COVP tabl

Hi,
In datasource 0CO_OM_CCA_9 , we have written a code in CMOD to get the FI Document Number from CO document Number.
The flow of code is:
1) From the CO document number, get reference document number (REFBNfield) from, COVP table
2) Pass this REFBN in AWKEY(10) field of BKPF table.
3) We have created new field in datasource named 'ZBELRE' which gets populated with BELNR field obtained from BKPF table.
This ZBELNR is the FI Document number.
But somehow wrong FI Document number is getting populated.
After analyzing code, we found that the AWKEY which we passed in BKPF table is incomplete and the full AWKEY is
COVP-REFBN+COVP-AWORG
Is this condition always remains true in all the cases? Also, is the selection criterion which we have used to find the FI document number from BKPF table is sufficient?
Our CO Consultant says that we should also pass AWTYP along with AWKEY in BKPF table.
Please suggest a solution.
Following is the code :
***********Datasource Modification for0CO_OM_CCA_9*******************
WHEN '0CO_OM_CCA_9'." Data Source
    TYPES:BEGIN OF ty_bkpf,
    belnr TYPE bkpf-belnr,
    xblnr TYPE bkpf-xblnr,
    bktxt TYPE bkpf-bktxt,
    awkey TYPE bkpf-awkey,
    bukrs TYPE bkpf-bukrs,
    gjahr TYPE bkpf-gjahr,
    END OF ty_bkpf.
    TYPES : BEGIN OF ty_bseg1,
    lifnr TYPE bseg-lifnr,
    belnr TYPE bseg-belnr,
    bukrs TYPE bseg-bukrs,
    gjahr TYPE bseg-gjahr,
    END OF ty_bseg1.
    DATA: it_bkpf TYPE STANDARD TABLE OF ty_bkpf,
    wa_bkpf TYPE ty_bkpf,
    it_bseg1 TYPE STANDARD TABLE OF ty_bseg1,
    wa_bseg1 TYPE ty_bseg1,
    l_s_icctrcsta1 TYPE icctrcsta1.
    "Extract structure for Datasoure 0co_om_cca_9.
    DATA: l_awkey TYPE bkpf-awkey.
    DATA: l_gjahr1 TYPE gjahr.
    DATA: len TYPE i,
    l_cnt TYPE i.
    l_cnt = 10.
    SELECT lifnr
    belnr
    bukrs
    gjahr
    FROM bseg
    INTO TABLE it_bseg1.
    DELETE ADJACENT DUPLICATES FROM it_bseg1 COMPARING belnr gjahr .
    SELECT belnr
    xblnr
    bktxt
    awkey
    bukrs
    gjahr
    FROM bkpf
    INTO TABLE it_bkpf.
    IF sy-subrc EQ 0.
      CLEAR: l_s_icctrcsta1,
      wa_bkpf,
      l_awkey,
      wa_bseg1.
      LOOP AT c_t_data INTO l_s_icctrcsta1.
        MOVE l_s_icctrcsta1-fiscper(4) TO l_gjahr1.
        READ TABLE it_bkpf INTO wa_bkpf WITH KEY awkey(10) =
        l_s_icctrcsta1-refbn
        gjahr = l_gjahr1.
        IF sy-subrc EQ 0.
          MOVE wa_bkpf-belnr TO l_s_icctrcsta1-zzbelnr.
          MOVE wa_bkpf-xblnr TO l_s_icctrcsta1-zzxblnr.
          MOVE wa_bkpf-bktxt TO l_s_icctrcsta1-zzbktxt.
          MODIFY c_t_data FROM l_s_icctrcsta1.
          READ TABLE it_bseg1 INTO wa_bseg1
          WITH KEY
          belnr = wa_bkpf-belnr
          bukrs = wa_bkpf-bukrs
          gjahr = wa_bkpf-gjahr.
          IF sy-subrc EQ 0.
            MOVE wa_bseg1-lifnr TO l_s_icctrcsta1-lifnr.
            MODIFY c_t_data FROM l_s_icctrcsta1.
            CLEAR: l_s_icctrcsta1,
            wa_bseg1,
            l_gjahr1.
          ENDIF.
        ENDIF.
        CLEAR: l_s_icctrcsta1.
      ENDLOOP.
    ENDIF.
***End of Datasource Modification for 0CO_OM_CCA_9*******************

Hi,
this forum is for the SAP BusinessObjects BI Solution Architecture. Please post your question into the corresponding product forum for SPA BW
regards
Ingo Hilgefort

Abort inserting a record in a table using a trigger

Hi there,
Is there any way to abort inserting a record in a table using a trigger?
For full details, I have the following table ("myTable"):
BSC INTEGER NOT NULL,
BTS VARCHAR2(20) NOT NULL,
INFO1 INTEGER,
INFO2 INTEGER
myTable_PK = PRIMARY KEY (BSC,BTS)
I have also a stored procedure that imports a data from text file and inserts them to the specified table (using UTL_FILE package). The stored procedure works great.
But the thing that in the text file itselft it might be (due to third-parity report generation bug) that the primary key will be violated or the BSC/BTS field has null value. In such case I just want to ignore the insertion statement using a trigger.
Thanks

Ok Jens, could you tell me what exception could I use?
Below a protion of my StoredProcedure.
CREATE OR REPLACE PROCEDURE update_myTable() IS
FHANDLE UTL_FILE.FILE_TYPE;
BSC INTEGER;
BTS VARCHAR2(20);
INFO1 INTEGER;
INFO2 INTEGER;
BEGIN
FHANDLE := UTL_FILE.FOPEN('LOG_FILE_DIR',FILENAME,'R',4000);
LOOP
UTL_FILE.GET_LINE(FHANDLE,STR);
-- Process the line STR and generates BSC, BTS, INFO1, and INFO2 values
EXECUTE IMMEDIATE 'INSERT INTO myTable VALUES(:1,:2,:3,:4)' USING BSC,BTS,INFO1,INFO2;
END LOOP;
EXCEPTION WHEN NO_DATA_FOUND THEN UTL_FILE.FCLOSE(FHANDLE);
END UPDATE_R205BTS;
Remember that I am already using an exception with NO_DATA_FOUND to indicate the end of file then closing it.
Thanks for your reply

Operates on two table using procedure

i want to handle two table using procedure in oracle 10g. i have created a procedure like this
CREATE OR REPLACE PROCEDURE sold_car1(
sid soldcar.sold_id%TYPE,
cid soldcar.id%TYPE,
cuid soldcar.customer_id%TYPE,
eid soldcar.emp_id%TYPE,
d soldcar.dat%TYPE
) IS
BEGIN
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd'));
DELETE FROM pcar where id=cid;*
COMMIT;
END sold_car1;
SHOW ERRORS
i have found some errors. how can i do this.

hi
the errors are something like this ''the procedure is created with some errors''.
actually i want to pass 4 parameters in the procedure that will insert in one table and among the 4 parameters by using one parameter i want to delete one row of another table.
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd')); //soldcar is first table
DELETE * FROM pcar where id=cid; //pcar is second table

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay

Best practice for deleting multiple rows from a table , using creator

Hi
Thank you for reading my post.
what is best practive for deleting multiple rows from a table using rowSet ?
for example how i can execute something like
delete from table1 where field1= ? and field2 =?
Thank you

Hi,
Please go through the AppModel application which is available at: http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
The OnePage Table Based example shows exactly how to use deleting multiple rows from a datatable...
Hope this helps.
Thanks,
RK.

Retreiving data from 2 tables using a sender JDBC Channel

Hi all,
We got anew requirement where we have to select data from 2 tables and update fields in 2 tables at the sametime.
I have a few queries regarding this.
Can we retrieve data from 2 tables using select query in sender JDBC channel?
If yes, how we can achieve this?
Can we use inner/outer joins in the select query?
Can we update field of 2 tables using the Update query in Sender JDBC channel?
Your help is greatly rewarded.
With Regards
Sudha.

Hi,
Even i have the same requirement where data has to be read from 2 tables and later update the falg once done .
SELECT query :
SELECT t1.KUNNR,t1.SETT_KEY,t1.QUART_START,t1.QUART_END,t2.PAY_METH,t2.MAT_NDC,t2.AMOUNT FROM TSAP_REBATE_MEDI t1 INNER JOIN TSAP_REBATE_LINE t2 ON t1.KUNNR=t2.KUNNR AND t1.SETT_KEY=t2.SETT_KEY WHERE t1.PROCESSING_STATUS = 'N' AND t2.PROCESSING_STATUS = 'N'
This is working fine.
Can somebody help me with update query with this. where flag PROCESSING_STATUS has to be updated with 'P'.
I tried a lot but couldnt get the answer
Br,
Manoj

How to find function module's and tables used for the particulat screen or TCODE?

Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.

Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip.

How to insert into two tables using a Single ADF creation form?

Hi,
I need to make a ADF Creation Form that will insert the data at same time in two tables... Like i have two tables Track (Track_id,Track_Name)
and Module ( Module_id, Track_id, Module_name, Module_Short_name) and i have to insert the data in both the tables using Same Creation Form.
can anybody help me out and gave me the solution,how to do that?
Thanks

if you want to insert different data into two different tables then you can drag the two data objects into creation form..
If you want to duplicate the data inserted in the one table to another then you can follow two approach
1. Drag and drop one table, When Save button is invoked then insert data into another table using callable statement.
or
2. Create on-insert trigger in Table1 where you can insert data into table2.
--Prasanna

Find matching records from two tables, useing three key fields, then replace two fields in table1 from table2

Similar Messages

Maybe you are looking for