Find & Replace text in html files

This is my first real attempt at using Automator, and it has become increasingly frustrating for me. I love the idea of Automator, nice interface, and it appears to be so easy to use. But, I can't get it to actually DO anything and I don't understand why.
Here is my goal:
to batch process multiple html files to remove certain characters and words (or replace them with empty space).
I currently open these files in Pages and do 6 separate Find & Replace commands for each file before I continue with my other processing tasks. This is very tedious and I believe the computer should be able to find & replace multiple items at one time. (I have used other utilities to do batch renaming and trimming file names before.)
All I want to do is select a group of files (usually 25 at a time) and have Automator get rid of all the unwanted words and characters before I open each file for final processing in Pages. I found a set of Automator actions for TextEdit which includes a Find & Replace action, but I've wasted over an hour so far trying to get it to work.
When I run the workflow, it acts like it's doing something, but the files remain unchanged. I have tried using actions such as Read Text File, Get Contents of TextEdit Document, Set Contents of TextEdit Document, along with 6 instances of Find & Replace, but I cannot get it to work.
I'm at a point today where I cannot afford to mess around with this anymore. I have to do it the long way in Pages or else I'll never get it done, but I want to get these Automator workflows to work before I have to repeat this task. (I do this at least once a week right now.)
Any ideas or suggestions? I've tried reading in the help menus and support pages, but perhaps I'm just not understanding something here.

Any ideas or suggestions?
You might be interested in using TextWrangler. It can perform batch find-and-replace changes across multiple selected files.
Good luck!
Andrew99

Similar Messages

Spotlight doesn't find search results in .HTML file contents

When I use Spotlight to search, it doesn't find any .HTML file contents. If I rename an .HTML file to use a .TXT extension, the contents are found. Is there a way to enable Spotlight to find contents in .HTML files?

I remembered that used to be problem, so I just checked on my local version of my site, and Spotlight found the files on the basis of content without a problem. So I took a look at my installed mdimporters in /Library/Spotlight, to see what may have led to this happy turn of events. I thought perhaps the iWeb mdimporter might be doing it, but was unable to find a reference to HTML in its type declarations. I then took a look at in /System/Library/Spotlight and discovered that RichText.mdimporter has a declaration for public.html as a content type. You should have that mdimporter installed by default, but you might take a look to make sure it is there.
If the mdimporter is there, but the html files aren't being indexed, it could be that whatever program you are using to create them isn't giving them the appropriate content type. I code by hand using TextEdit, which saves them with the following metadata entry:
kMDItemContentType = "public.html"
kMDItemContentTypeTree = (
"public.html",
"public.text",
"public.data",
"public.item",
"public.content"
They are then evidently indexed without problem by the RichText.mdimporter. You might try opening one of your html docs in TextEdit (as plain text), resave, and see if Spotlight then picks up the content of the file. Of course, the content means the words that people see when they look at the page in a browser. If the content you are talking about is stuff that is inside an html tag, you are out of luck. I know of NO way to get Spotlight to find that. EasyFind will though, but it is a brute force search and will take awhile, even when restricted to a particular folder.
Francine
Francine
Schwieder

Batch code for running a find/replace all on multiple files within a source floder/directory

What I need is a Batch source code that will open all files in a folder/directory and run a find and replace_all query within them and then save all the files. The files were created in Illustrator and saved using the Scene7 FXG format extension.    These files will be uploaded into Scene7 as a group after the find and replace macro/query is run on the code. The same find and replace query will be the same for all the files. Basically this function or batch process will save time in setting the same parameters all at one time instead of having to set the parameters individually in scene7.
a source code sample of the find/replace module macro might be              searchString: s7:colorvalue="#FFFFFFFF"
                                                                                                                      replaceString: s7:colorValue="#&txtclr;"
                                                                                                                      searchWhat   "FXG document"
                                                                                                                         searchSource: true,
                                                                                                                    useRegularExpressions:   true
I have no problems creating batch files within Ai and PhotoShop but I have limited programming skills in how to create source code for manuipulating documents outside of those apps or in a OS invironment.
I could probably come up witha simple program to do what i want for one document but i get lost when dealing with multiple documents in a source folder (prolbem is, I will be dealing with thousands of documents not 100 or less)
If anything which Adope cloud app would work best: Dreamweaver or Edge code   (or just use my notepad)

What I need is a Batch source code that will open all files in a folder/directory and run a find and replace_all query within them and then save all the files. The files were created in Illustrator and saved using the Scene7 FXG format extension.    These files will be uploaded into Scene7 as a group after the find and replace macro/query is run on the code. The same find and replace query will be the same for all the files. Basically this function or batch process will save time in setting the same parameters all at one time instead of having to set the parameters individually in scene7.
a source code sample of the find/replace module macro might be              searchString: s7:colorvalue="#FFFFFFFF"
                                                                                                                      replaceString: s7:colorValue="#&txtclr;"
                                                                                                                      searchWhat   "FXG document"
                                                                                                                         searchSource: true,
                                                                                                                    useRegularExpressions:   true
I have no problems creating batch files within Ai and PhotoShop but I have limited programming skills in how to create source code for manuipulating documents outside of those apps or in a OS invironment.
I could probably come up witha simple program to do what i want for one document but i get lost when dealing with multiple documents in a source folder (prolbem is, I will be dealing with thousands of documents not 100 or less)
If anything which Adope cloud app would work best: Dreamweaver or Edge code   (or just use my notepad)

"texts on html file" are not updated "when edited on server"

Hi All,
QUESTION
What are the solutions, for having editable text/content on .html published files, so clients can edit through their server control panel
Scenario:
Client wants to update the "text" by editing the .html files on a server.
I published the website as static html so the text can be included in .html file, but edits made on server's control panel, doesnt appear in live website.
I also noticed that the texts located in edgeActions.js are editable through server, i am not very interested to define all my text content as the dynamic
code because then I must worry about empty .html files and SEO questions.

Here is what I ve found in regard to my own question...
For a Client, to be able to change the text on server (Ex: phone numbers in a contact page), they should access and modify the text in the edge.js or sometimes edgeaction.js page. Changing the text on .html page will create no result. I assume, this is because, the .html page is exported ONCE and only at the point of Publishing a project, to satisfy the SEO needs or whatever. Think of the text on .html page as a Sticker to fool the rest of the world, changing it will not change anything on webste and. Also if you change the text in .js, the change will not be relfected on .html file.

AppleScript: Change an order of texts and HTML file in the body of Mail

I would like to know how to insert a HTML file below the Signature in the body of Email.
This is my code,,,,
set the clipboard to (read (choose file) as «class RTF »)
set theBody to "Hello"
tell application "Mail"
activate
set theMessage to make new outgoing message with properties {content:theBody, visible:true, subject:"mysubject"}
end tell
tell application "System Events"
tell process "Mail"
set focused of UI element 1 of scroll area 1 of window 1 to true
keystroke "v" using command down
end tell
end tell
What I would like to do is an order of body going like
From the top:
Body
Signature
HTML rtf file
Please teach me how to do!
Cheers,

Hi,
murrayshimada wrote:
Wondering how about inserting a HTML between body and signature? If you have a free time, please give me a tip again. Anyway, thank you for your help. Cheers,
You can set the order like this:
set the clipboard to (read (choose file) as «class RTF »)
set theBody to "Hello" & return & return -- need two return character to paste the clipboard after the body
tell application "Mail"
    activate
    set theMessage to make new outgoing message with properties {content:theBody, visible:true, subject:"mysubject"}
    my pasteToEnd()
    delay 0.6 -- need a delay to not remove the pasted text.
    set message signature of theMessage to signature 1 -- this put the signature after the text
end tell
on pasteToEnd()
    tell application "System Events"
        tell process "Mail"
            set focused of UI element 1 of scroll area 1 of window 1 to true
            key code 125 using command down -- (arrow down + command down) to set the insertion point to the end of text
            keystroke "v" using command down
        end tell
    end tell
end pasteToEnd
Here's another example, the order = the HTML, the body and the signature:
set the clipboard to (read (choose file) as «class RTF »)
set theBody to "Hello"
tell application "Mail"
    activate
    set theMessage to make new outgoing message with properties {content:"theBody", visible:true, subject:"mysubject"}
    my pasteAtBeginning() -- at beginning
    delay 0.6 -- need a delay to not remove the pasted text.
    set message signature of theMessage to signature 1 -- this put the signature after the text
end tell
on pasteAtBeginning()
    tell application "System Events"
        tell process "Mail"
            set focused of UI element 1 of scroll area 1 of window 1 to true -- this set the insertion point at beginning
            keystroke "v" using command down
            keystroke return & return -- to put a blank line between the RTF and the body
        end tell
    end tell
end pasteAtBeginning

Find & Replace Text - Styling Problem (CS5 Mac)

Hi everyone,
Is there a way when finding and replacing a text string to style the block of copy. My problem is that I have some color codes given by the customer that now need to be converted to our internal color matches on our production drawings.
The original string of text looks like this:
Holder: P1 (Metallic Silver)
What I’m getting when I go to replace this string is:
Holder: Natural Satin
What I want is:
Holder: Natural Satin
I do not want the replaced text to be italicized. I'm thinking since the original string ends with an italic style that the replacement string is also italicized. There are about 50 pages of drawings with about 10 colors on the job and some pages have them entered in more than one place. So that's a minimum of 500 entries and defititely more considereing the multiple places these are called out. I'd really rather not have to copy and paste all of these by hand. I'm use to FreeHand, which would respect the font styling of pasted text in the find and replace diaglog.
Any help would greatly be appreciated. Work around if it cant be done natively?
Thanks

Thanks Monika,
I downloaded that earlier today and yes realized that the beta is over after installing it. I joined the mailing list for updates, but it looks like the script hasn't been updated in nearly 3 years. I'm not sure if something in one of the newer versions of Illustrator broke the script and the script writer decided not to update it anymore? I guess I could email them, but seems weird that if there were an updated version that it would be posted on the site also. I'd hate to pester the author. Seems like an extremely useful tool if it would do what I need. I suppose it couldn't hurt to ask anyway. I don't mind supporting developers too by paying for the script. This is something that I use all the time. I've spent about an hour and a half copying and pasting these text blocks for something that truly take about 2 minutes to do with a proper find and replace.
I do appreciate your input though, it's greatly appreciated.

Find+replace in all Pages files in a folder

Hi,
A simple question (?). I have a long manuscript which is a folder comprising several dozens of Pages documents. I would like to execute a find+replace command across all the individual documents (without having to open them all one by one...) I guess Applescript will be the answer, but I am not experienced in its use... Would there be a pre-existing script available? I have searched, but with no success.
Many thanks.

Ned is right... if the server can do it, let it. Also - I only wish Flash had file system access on servers... but if they did - how would Adobe sell Flash Media Server?
Google php filelist, php directory list, etc... you'll find lots of useful scripts.

Print the text into html file

Dear all,
How i will print the result directly to the html file instead of print output in the console.
Give the sample code.
Thanks & Regards,
kumar

Hi kumar :)
I'm not sure if this is what you mean but Jakarta has an Element Construction
Set (ECS) API that can generate elements for HTML and XML mark-up
languages.
Please checkout their site: http://jakarta.apache.org/ecs/

How do I find and replace text in PHP files?

How can I in CS3 make sitewide changes to the text in PHP pages without changing variable names etc that have the same name?
For example if I have an installation of a PHP forum and I want to change every instance of the word 'forum' to 'message board'...
If I used the 'inside tag' search with " as the tag, then if "" contained a variable called 'forum' it would also be changed and therefore corrupt the code....
Is there a simple way around this?
Thanks!
I'm using CS3 on Windows Vista.

It looks like you're trying to find and replace source code, so you may be able to look at the various places that are looked at when finding and uncheck the ones that don't apply.
But, if it's all source code then that won't help. One thing that may work is to expand the search option - for example if the work "forum" that you're wanting to change it preceded by another word, or character or something that sets it apart, then do you find on that. You can expand that search phrase as far out in either direction that you need to to make it different, if of course that is practical in your situation.
The only other way I can think of is to somehow create an exception rule, but I'm not sure if that's possible or how to do it.

Find and Replace text in several files

Can automator do that?
I made a website in iweb and as the ones of you that had already tried it must know, it is impossible to change the font format on the links, you have to hack the code manually, changing the .css files.
I think a trick would be to get automator to replace the code automatically, to lock for a string of text inside a group of files and save it. I just don't know how to do it. Can anybody help?
The most I have been able to do is to get automator to open all .css files within a folder, inlcuidng all subfolders and open them on textedit.

I doubt anyone is going to download and look at your code. Please remember that anyone who helps you here is a volunteer, and so the onus is on you to make helping you as easy as possible to do. That means you must take the effort to pare your code down to the bare minimum that shows your problem and compiles, and then post this code here. If you do decide to do this, please use code tags by highlighting your code after pasting it, and then pressing the Code button just above the editor window.
Good luck.

Find/Replace text in one Doc based on List from another Doc

I'm not sure Automator can do this so I thought I would ask before spending too much time on it. I have searched the forums and several of the Automator tutorial websites.
What I want to do is take one text file (or it could be an Excel file, I don't care) with a list of words to Find in a folder full of files.
For example I have this list in a txt file:
Big Dog
Furry Cat
Bird
Fox
I would want the action to search every document for every occurrence of 'Big Dog', then search for every occurrence of 'Furry Cat', etc. I would also want to replace each instance with something else, say a formatted html link.
Is something like that even possible with Automator? I am on Snow Leopard but I didn't see a forum for Automator on SL. Thanks in advance for any help/advice.

Asked and responded here:
http://discussions.apple.com/thread.jspa?messageID=8367522
Yvan KOENIG (from FRANCE vendredi 14 novembre 2008 14:22:47)

HT2488 Find/Replace text in document with automator: any suggestions?

I'm looking to replace a number of unique html tags for a number of documents: is there any way to do this without going through the documents one-by-one, tag-by-tag? I would imagine I might be able to do something with automator, but I'm open to any other suggestions. I have some knowledge of html, but that's about it.

So I take it this is something you do regularly, not something that needs to get done once? if it were a oneshot operation it would be simpler to use TextWrangler.
For repeated use, the simplest approach is to run through the files and apply text item delimiters to each tag:
set indesignTags to {"idtag1", "idtag2", "idtag3"}
set htmlEquivs to {"htmltag1", "htmltag2", "htmltag3"}
set theFiles to choose file with prompt "Choose indesign files" with multiple selections allowed
repeat with aFile in theFiles
-- get file text
          set fileText to read aFile
-- swap tags
          repeat with i from 1 to count of indesignTags
-- swap lead tags
                    set fileTextBits to tid({input:fileText, delim:"<" & item i of indesignTags})
                    set fileText to tid({input:fileTextBits, delim:"<" & item i of htmlEquivs})
-- swap trailing tags
                    set fileTextBits to tid({input:fileText, delim:"</" & item i of indesignTags})
                    set fileText to tid({input:fileTextBits, delim:"</" & item i of htmlEquivs})
          end repeat
-- make new file path with html extension
          set oldFilePath to POSIX path of aFile
          set filePathBits to tid({input:oldFilePath, delim:"."})
          set last item of fileNameBits to "html"
          set newFilePath to tid({input:filePathBits, delim:"."})
-- save at new file path
          set fp to open for access newFilePath with write permission
write fileText to fp
close access fp
end repeat
on tid({input:input, delim:delim})
-- handler for text items
          set {oldTID, my text item delimiters} to {my text item delimiters, delim}
          if class of input is list then
                    set output to input as text
          else
                    set output to text items of input
          end if
          set my text item delimiters to oldTID
          return output
end tid
This will work if the indesign tags are unique and there is no complex syntax. It might fail if tags have overlapping names (e.g. "<bl>" and "<blue>") or if there's any irregular notation. If you need more sophisticated handling you'll have to use regular expressions. In that case, download and install the Satimage osax from this page, and use the following (similar) code:
set indesignTags to {"idtag1", "idtag2", "idtag3"}
set htmlEquivs to {"htmltag1", "htmltag2", "htmltag3"}
-- set up regular expressions change lists
set findList to {}
set changeList to {}
repeat with i from 1 to count of indesignTags
          set end of findList to "(</?)" & item i of indesignTags & "(?![[:alnum:]])"
          set end of changeList to "\\1" & item i of htmlEquivs
end repeat
set theFiles to choose file with prompt "Choose indesign files" with multiple selections allowed
repeat with aFile in theFiles
-- get file text
          set fileText to read aFile
-- swap tags - needs Satimage osax
          set fileText to change findList into changeList in fileText with regexp
-- make new file path with html extension - needs Satimage osax
          set oldFilePath to POSIX path of aFile
          set newFilePath to change "\\.[^.]+$" into ".html" in oldFilePath with regexp
-- save at new file path
          set fp to open for access newFilePath with write permission
write fileText to fp
close access fp
end repeat
Message was edited by: twtwtw - I made an error in the second regular expression. should be "\\.[^.]+$", not "\\..*$". fixed in text.

How to replace text in a file

Hi everyone,
I have a txt file and It has some data's. I want to specifically replace a character in the text file. Data's will be like this,
TT=15
S1ST=21601
S1EN=50400
S2ST=50401
S2EN=72000
S3ST=72001
S3EN=21600
GNST=00000
GNEN=00000
S1B1S=22800
S1B1E=23400
S1B2S=28800
S1B2E=30600
S1B3S=36000
S1B3E=36600
S1B4S=45000
S1B4E=46800
In the 2nd line i.e. S1ST=21601, I want to replace 36000 instead of 21601.
After replacing the specific character, data's should overwrite in the file or appending the file will also ok for me.
Give me a suggestion. I am using LV 8.2. So plz post your code in 8.2 ver
Thanks in advance.
Regards,
Vijay
Solved!
Go to Solution.

Check this out.
Edit:- attaching 8.2 version
With Regards
Miraz
Kudos is better option to thank somebody on this forum
Attachments:
String.vi ‏8 KB
String.vi ‏8 KB

Help with Replacing text in a file using a vbscript

I have the following script which I am wanting to
1. Take the prf file and read it
2. Edit a line in the outlook .prf file replacing it with the text I have asked it to replace which is the full name of the user pulled from the currently logged on user
The problem I am seeing is that when the temp file is being generated it is throwing off the formatting of the file hence the script doesn't work. Can anyone help me please.
set objSysInfo = CreateObject("ADSystemInfo")
struser = objSysInfo.Username
set objUser = GetObject("LDAP://" & strUser)
strFullName = objUser.Get("displayName")
Const ForReading=1
Const ForWriting=2
Set objFSO = CreateObject("Scripting.FileSystemObject")
folder = "C:\test"
'filePath = folder & "file.txt"
filePath = "c:\test\test2007_3.prf"
Set myFile = objFSO.OpenTextFile(filePath, ForReading)
Set myTemp= objFSO.OpenTextFile(filePath & ".tmp", ForWriting, True)
Do While Not myFile.AtEndofStream
myLine = myFile.ReadLine
If InStr(myLine, "MailboxName=%UserName%") Then
myLine = "&strFullName"
End If
myTemp.WriteLine myLine
Loop
myFile.Close
myTemp.Close
objFSO.DeleteFile(filePath)
objFSO.MoveFile filePath& ".tmp", filePath
Christopher

Sorry Irv,
Here is the code I have and then after that is the prf file. I think there is an issue with the file structure because if I take a regular text file and add the lines in there myself it replaces the lines, but with the prf file or even the prf file as a
text file it gives me the invalid argument message
Const filePath = "c:\test\test2007_3.txt"
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set myFile = objFSO.OpenTextFile(filePath)
fileText = myFile.ReadAll()
myFile.Close
fileText=Replace(fileText,"%UserName%","THIS_IS_THS_REPLACEMENT_TEXT")
Set myTemp= objFSO.OpenTextFile(filePath, 2, True)
myTemp.Write fileText
myTemp.Close
;Automatically generated PRF file from the Microsoft Office Customization and Installation Wizard
; Section 1 - Profile Defaults
[General]
Custom=1
ProfileName=Somthing
DefaultProfile=Yes
OverwriteProfile=Yes
ModifyDefaultProfileIfPresent=false
DefaultStore=Service1
; Section 2 - Services in Profile
[Service List]
ServiceX=Microsoft Outlook Client
ServiceEGS=Exchange Global Section
Service1=Microsoft Exchange Server
ServiceEGS=Exchange Global Section
; Section 3 - List of internet accounts
[Internet Account List]
; Section 4 - Default values for each service.
[ServiceX]
CachedExchangeMode=0x00000002
CachedExchangeSlowDetect=true
[ServiceEGS]
CachedExchangeConfigFlags=0x00000900
MailboxName=%UserName%
HomeServer=
RPCoverHTTPflags=0x0027
RPCProxyServer=
RPCProxyPrincipalName=
RPCProxyAuthScheme=0x0001
[Service1]
OverwriteExistingService=No
UniqueService=Yes
MailboxName=%UserName%
HomeServer=
OfflineAddressBookPath=%USERPROFILE%\local settings\application data\microsoft\outlook\
OfflineFolderPathAndFilename=%USERPROFILE%\local settings\application data\microsoft\outlook\outlook.ost
AccountName=Microsoft Exchange Server
DefaultAccount=TRUE
;[ServiceX]
;FormDirectoryPage=
;-- The URL of Exchange Web Services Form Directory page used to create Web forms.
;WebServicesLocation=
;-- The URL of Exchange Web Services page used to display unknown forms.
;ComposeWithWebServices=
;-- Set to true to use Exchange Web Services to compose forms.
;PromptWhenUsingWebServices=
;-- Set to true to use Exchange Web Services to display unknown forms.
;OpenWithWebServices=
;-- Set to true to prompt user before opening unknown forms when using Exchange Web Services.
; Section 5 - Values for each internet account.
; Section 6 - Mapping for profile properties
[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
OfflineAddressBookPath=PT_STRING8,0x660E
OfflineFolderPathAndFilename=PT_STRING8,0x6610
[Exchange Global Section]
SectionGUID=13dbb0c8aa05101a9bb000aa002fc45a
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
RPCoverHTTPflags=PT_LONG,0x6623
RPCProxyServer=PT_UNICODE,0x6622
RPCProxyPrincipalName=PT_UNICODE,0x6625
RPCProxyAuthScheme=PT_LONG,0x6627
CachedExchangeConfigFlags=PT_LONG,0x6629
[Microsoft Mail]
ServiceName=MSFS
ServerPath=PT_STRING8,0x6600
Mailbox=PT_STRING8,0x6601
Password=PT_STRING8,0x67f0
RememberPassword=PT_BOOLEAN,0x6606
ConnectionType=PT_LONG,0x6603
UseSessionLog=PT_BOOLEAN,0x6604
SessionLogPath=PT_STRING8,0x6605
EnableUpload=PT_BOOLEAN,0x6620
EnableDownload=PT_BOOLEAN,0x6621
UploadMask=PT_LONG,0x6622
NetBiosNotification=PT_BOOLEAN,0x6623
NewMailPollInterval=PT_STRING8,0x6624
DisplayGalOnly=PT_BOOLEAN,0x6625
UseHeadersOnLAN=PT_BOOLEAN,0x6630
UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
UseHeadersOnRAS=PT_BOOLEAN,0x6640
UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
ConnectOnStartup=PT_BOOLEAN,0x6642
DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
DisconnectOnExit=PT_BOOLEAN,0x6645
DefaultDialupConnectionName=PT_STRING8,0x6646
DialupRetryCount=PT_STRING8,0x6648
DialupRetryDelay=PT_STRING8,0x6649
[Personal Folders]
ServiceName=MSPST MS
Name=PT_STRING8,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Unicode Personal Folders]
ServiceName=MSUPST MS
Name=PT_UNICODE,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Outlook Address Book]
ServiceName=CONTAB
[LDAP Directory]
ServiceName=EMABLT
ServerName=PT_STRING8,0x6600
UserName=PT_STRING8,0x6602
UseSSL=PT_BOOLEAN,0x6613
UseSPA=PT_BOOLEAN,0x6615
EnableBrowsing=PT_BOOLEAN,0x6622
DisplayName=PT_STRING8,0x3001
ConnectionPort=PT_STRING8,0x6601
SearchTimeout=PT_STRING8,0x6607
MaxEntriesReturned=PT_STRING8,0x6608
SearchBase=PT_STRING8,0x6603
CheckNames=PT_STRING8,0x6624
DefaultSearch=PT_LONG,0x6623
[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046
FormDirectoryPage=PT_STRING8,0x0270
WebServicesLocation=PT_STRING8,0x0271
ComposeWithWebServices=PT_BOOLEAN,0x0272
PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
OpenWithWebServices=PT_BOOLEAN,0x0274
CachedExchangeMode=PT_LONG,0x041f
CachedExchangeSlowDetect=PT_BOOLEAN,0x0420
[Personal Address Book]
ServiceName=MSPST AB
NameOfPAB=PT_STRING8,0x001e3001
PathAndFilename=PT_STRING8,0x001e6600
ShowNamesBy=PT_LONG,0x00036601
; Section 7 - Mapping for internet account properties. DO NOT MODIFY.
[I_Mail]
AccountType=POP3
;--- POP3 Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- POP3 Account Settings ---
POP3Server=PT_UNICODE,0x0100
POP3UserName=PT_UNICODE,0x0101
POP3UseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
POP3Port=PT_LONG,0x0104
POP3UseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
LeaveOnServer=PT_LONG,0x1000
[IMAP_I_Mail]
AccountType=IMAP
;--- IMAP Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- IMAP Account Settings ---
IMAPServer=PT_UNICODE,0x0100
IMAPUserName=PT_UNICODE,0x0101
IMAPUseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
IMAPPort=PT_LONG,0x0104
IMAPUseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
CheckNewImap=PT_LONG,0x1100
RootFolder=PT_UNICODE,0x1101
[INET_HTTP]
AccountType=HOTMAIL
Account=PT_UNICODE,0x0002
HttpServer=PT_UNICODE,0x0100
UserName=PT_UNICODE,0x0101
Organization=PT_UNICODE,0x0107
UseSPA=PT_LONG,0x0108
TimeOut=PT_LONG,0x0209
Reply=PT_UNICODE,0x0103
EmailAddress=PT_UNICODE,0x000C
FullName=PT_UNICODE,0x000B
Connection Type=PT_LONG,0x000F
ConnectOID=PT_UNICODE,0x0010
Christopher

Simple text edit html files will not display as web pages using Safari

How does one get Text Edit files saved as HTML to display as a web page rather than showing the code as written? It appears that somehow some sort of code generator is being invoked and causing this to happen. I am not trying to do anything complex, just simple files like "Hello World".

Hi ..
Make sure you are following the instructions as noted here > Creating a Basic Web Page
You may need to turn off all Safari extensions.
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
Switch to OFF.
Then see if it reads as HTML or Hello World.

Find & Replace text in html files

Similar Messages

Maybe you are looking for