Find via network does not work

Hi..I´m having a big trouble when trying to find images by it´s keywork when they are stored in my company server. Let´s explain
I take some photos or even work with Photoshop, Illustrator or InDesign files. I set different keyword for the files and move it to a central folder in my server, where everyone inside the company has acess.
The problem is: Nobody is able to find that images...In Adobe Bridge (Cs3 or CS4) they go Edit > Find, set the criteria and run the search > not done. The unique person able to find that images by searching via keywork is myself inside my own computer (the one I´ve set files´ keywords)
I´ve tried everithing, check options in find dialog box, triing to centralize a cache folder in server and pointing all the bridges to that folders, purge and export cache to folders, and so on, but I do not know if it´s anything related to cache.
In Resume, nobody is able to find images by any criteria if they are stored inside server (just the people that set keyword is able).
How to solve it?
Thank you a lot
Gustavo.

This question has been asked many times, but no one responds back as how they solved the problem.
Seen this recent link. It sounds like you have tried suggestions at end of post #1, and it did not work.
If you find something that does work please post back to help others.
http://forums.adobe.com/thread/556836?tstart=0
Message was edited by: Curt Y
Note: No files will be found unless the folders are indexed.

Similar Messages

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

Primary network does not work, guest network does work

I updated the firmware on the Time Capsule, after which we had a power outage. When the Time Capsule came back up, after a bunch of fiddling around we discovered that although the primary network cannot connect the Internet through our phone system router, the guest network works fine. The primary network does not work with the guest network turned off. Resetting the Time Capsule had no effect.

After an entire day of messing around, we went into Airport Utility, selected Internet, selected DHCP, and changed DHCP Beginning Address to match the one showing on the guest network (172.16). Now the primary network can see the Internet.

C7 Social Network does not work!

My nokia C7 social network does not work.
After log in my nokia account,it does not appear facebook&Twitter.it just empty
How to solve it?

Did you try reinstalling Nokia Social? Which version is installed in your phone? Try the latest one http://betalabs.nokia.com/apps/nokia-social-1-3?req=true
If you want to thank someone, just click on the blue star at the bottom of their post

Network does not work or the network signal attenuates rapidly

Network does not work or the network signal attenuates rapidly

Hello shishir_teamo,
If you are having issues with Wi-Fi on you iPhone 4S, check the following article that will help troubleshoot the issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

Firefox Find on Page does not work reliably in XML.

I'm troubleshooting xml in firefox. I noticed that CTRL -F find on page does not work for finding strings "reliably".
Sometimes it finds something and sometimes it doesn't.
"Strings that are there"..
You can find next, next, if it worked, but then if you find previous it will fail at some point.
(View source, find on page) works though.. but not a native page.

Make sure that "Match case" on the find bar (Ctrl+F) doesn't have a check mark.

HT204032 Why find my Mac does not work in powernap?

FInd my Mac does not work in powernap mode even though I enabled it energy preferences to work while on battery power.
ANy ideas?

"I think Find My Mac is not one of the features claimed to work in Power Nap."
Yes it is.
Please see the link at top of this page.
"Find My Mac. Locate a lost Mac notebook even when it’s sleeping."

I have just upgraded to Lion and I now find that my VPN network does not work properly. It worked fine with Leopard.

I have just upgraded to Lion and now my VPN connection does not work properly. It was working fine when I was using Leopard. The VPN is My Private Network and we use it to link to BBC iPlayer when abroad. It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site. Any suggestions?

Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie

SWP 6.4 install on second computer in wifi WIN 7 network does not work for me.

Installed on my desktop, works fine. Installed on my Laptop, does not work.
As administrator I see the clip window, can open and close it but no menu, so I cannot use it.
As user the switch in the toolbar is there but it does not activate the clip window.
On both machines the OS is Win 7 Home Premium, the printer is the Smart 109B. Printing through Wifi to my printer which is attached to my desktop as a USB-printer works fine. But i take it the real printing is not involved in working with SWP. Maybe networking but I cannot find any hint. Pse help me.
Henk

Hi Tomasz,
as I figured out, this problem is related to the usage or measurement of the InDesign-document at least for me.
I create two portrait-oriented InDesign Layouts.
For the first I choose Print-usage in the New Document-dialog.
For the second I choose Web-usage in the New Document-dialog.
The first will render as bitmap (wrong).
The second will render as PDF (correct).
Folio- and Article-Image-Type is set to PDF in both cases.
Strange behavior.
Regards
Ingo
Am 06.09.2011 um 15:52 schrieb Tomasz Kuczborski:
OK. Ingo, have a look:
attached below is what you see whenever you create new article. So, if you create 10 articles, you have 10 opportunities to set the rendering intent differently. I think this is wrong, as the image format setting applies to the whole folio. Or maybe it has changed recently? If not, the least what should happen is a warning, that your new choice changes the actual setting.
Cheers,
Tomek
http://forums.adobe.com/servlet/JiveServlet/showImage/81969/ScreenShot2011-09-06at15.46.58.png
>

I have a 2013 macpro I upgraded to yosemite. Now I find time machine does not work, nor my old back up using a click free wireless back up. What is the status of time machine and yosemite?

What is the status of time machine not working with yosemite?
I upgraded mu mac pro to yosemite and since have found time machine does not work.
Also, my old backup via a clikfree wireless backup does not work any longer.
Is anyone working on this issue?
Is there anyway I can backup my information today and until time machine &
yosemite get fixed?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

SCVMM 2012, Conntect via conosle does not work when logged in with specified credentials

Hi all
I have a problem with the SCVMM 2012 console. When I start the console I select the "Specify credentials" option and then I enter my admin credentials. Afterward the console opens
and everything works except the "Connect via Console" function.
When I try to connect to a VM I get the following message:
Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons: Another connection was established to the console of this machine. The virtual machine has been shut down or put into the saved state. The user credentials
provided do not have the necessary privilege to connect (0x0003, 0x0300)
It seems that the Virtual Machine Viewer runs not under the admin credentials which I enter at the beginning and therefore the console cannot connect.
Has someone the same issue ? Is it by design that the console connection does not work with specified credentials or is a sort of a bug or error ?
Thx
J0fe

Being new to SCVMM, I've just come across this issue myself, though I came to a different (not necessarily better, but good enough for me) resolution.
I have a somewhat convoluted but not abnormal configuration where the SCVMM server lives in a separate untrusted forest to that which the Hyper-V Server hosts live.
As people have noted in this and other threads, the VirtualMachineViewer.exe process launches in the same security context with which you logged onto your pc. While the VmmAdminUI.exe process also runs in the same security context,
the network logon it issues makes use of the credentials provided at the SCVMM MMC's logon screen, which VirtualMachineViewer.exe does not.
I elected to use Credential Manager to resolve this issue.
In Credential Manager, I created a "Windows Credential" entry where the hostname matched the FQDN of the hostname that appears within SCVMM as the virtual host entry. Using an IP does not match if you've used an FQDN in the SCVMM
registration, and vice versa. If you used an IP for the host in SCVMM, then you need to supply that IP as the hostname in Credential Manager, and likewise if you used a FQDN.
This solution isn't perfect as it requires you to manage numerous Credential Manager entries (one per host), but that still appealed to me far more than one per guest. If I had a larger environment, I'd script the account configuration
given it only needs to happen once per host, rather than on an ongoing basis of once per guest as some of the above approaches would require.
I haven't tested the different combinations to verify the least permissions required. For the time being I've gone with the model of using a non-privileged domain user account (to avoid managing multiple identities and passwords)
which I added to the local Administrators group of each Hyper-V Server host. This stuck me as being a sound enough compromise between rigid security and ease-of-administration (given the per host arrangement in Credential Manager).
With the account correctly specified in Credential Manager, I'm able to move on past the 0x0003 error and successfully use the remote function.
If I was to point out an upside to this, it would be that this approach would allow me to remote Hyper-V servers in untrusted forests (including workgroups), which is something I couldn't do if the VirtualMachineViewer.exe process
did in fact use my SCVMM credentials alone. Ultimately, that's something you have to come to terms with yourself, though.
Cheers,
Lain
Thanks a bunch Lain, this helped! I'd still consider this a bug, however, and not a workable solution for a large number of servers/admins... But for now this does the trick, thanks!

Having start up problems, keyboard light and loudness adjustment via keyboard does not work

Often if I start my MacBookPro 13" with Lion it starts up and is than blocked. I can not open the finder nor starting any programm. The turning wheel never stops and I have to restart the book by pressing the on/off button for a long time. Sometimes I need to do that several times till it runs stable.
During this week I experienced in addition that the keyboard light is not working anymore and also the loudspeaker adjustment does not work via keybaord. Only via menu bar.
Any idea what's going on with my book?

Read these two links from the Apple support files:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379
Good luck.
Ciao.

Guest network does not work

Hi
I have latest Airport Extreme with 2TB hard disk (Time Capsule). I have working private network after latest firmware update (7.7.2 here) except my guest network. I have tried to setup the guest network as open network and WPA/WPA2 network with password but it does not work.
I can see the guest network but when I try to connect to it the connection does not work (= there is no internet connection or I cannot connect at all). Private network works fine (WPA2 Personal). Router mode is off (bridged network).
Any ideas how to get it work?

Router mode is off (bridged network).
Any ideas how to get it work?
The TC will nor produce a working guest network without being in Router mode.. ie DHCP + NAT.. you will not get it working in bridge.. it tricks you.. it looks so like it is going to work.. but no. it cannot.
You must rearrange your network so the TC is main router..
Or
IMHO the easier way is to go and buy a cheap wireless router.. a $35 tp-link etc.. and simply use that as AP. It is cheaper, easier and much faster.. guest network is still adding clients to the same wireless.. whereas setting up a second AP allows you to have an entirely separate connection.

WEP network does not work

After upgrade to Snow Leopard, I tried to connect to my home network. It uses plain WEP key (ASCII key, not a "password").
My network at work uses WPA and after upgrade, it just worked, I did not have to set any keys or anything.
Home network with WEP does not work. I see it, but I can't connect. I tried deleting and creating the network again in preferences. I'm sure it's 128-bit ascii key, it has to be exactly 13 characters. The network then uses DHCP and works on all other computers. I can't change to WPA, because I have a wifi-connected printer without WPA support.
Any idea what could have changed after upgrade to Snow Leopard? I never had any problems with that network when using 10.5.

The desired network can be the only network in the list of networks
When you click on the desired network you are prompted for a WEP key.
When you enter the key, the "failed to connect" shows up in the lower left corner of the dialog.
The key was verified by two others in the room who were able to get on using the same key (one on a dell, one on an hp.)
The network is inside a stone building so there is very little outside interference. The same laptop was able to connect to the same network last week before the upgrade to snow leopard.
My wifes 2006 Macbook pro is unable to connect to open networks and looses our time capsule network several times a day even though it is in the same room less than 10 feet from the time capsule and has all bars lit up. This is all happening the very next day after a Snow Leopard upgrade.
What ever changed in snow leopard, made the wireless worse. Is there a way to get the old wireless drivers back?
Thanks for your Help
Rob

Find via network does not work

Similar Messages

Maybe you are looking for