[solved] Installing on Acer Aspire One D150

Arch installs fine. I'm looking at the wiki article and it says to go to Atheros' web site to download the drivers for the ethernet adapter. There's a problem with that. The site isn't up. Every post I've found on Google and here, even some fairly recent ones, has had the people find it at that site. With a few of the posts being on this very forum, I figured someone would have uploaded something to the AUR, but that is not the case.
Without some way of getting on the 'net, Arch turned my netbook into a useless hunk of tech. There's no iwconfig present, so I can't use wireless, either.
I'm not bashing Arch here. I'm just tired of screwing with getting my AAO back up and running after over 24 hours of constant fidgeting with it. I would really not like to install another Ubuntu-based distro on it (again, with nonworking ethernet), but it and Fedora are the only two I've gotten to work as of yet.
And I forgot my question. Does anyone have a solution? Can someone upload the driver?
And I'm stupid. I should have put this in the laptop section.
Last edited by urist (2009-12-04 04:45:56)

I didn't see the giant header that said "Kernel Drivers for Aspire One D250" on that page. Still, that doesn't explain why it's talking about the 250 on a page for the 150.
I forgot to mention that I tried the atl1e driver that was preinstalled, but it didn't work. Nothing showed up in ifconfig, no eth0, no wlan0, just lo.
Thanks for all of the replies. I've got Arch installed and all is well (except I still have no eth0). One of the above posters was right. I didn't check wireless_tools when installing the first time. Updating now.
Last edited by urist (2009-12-03 23:23:49)

Similar Messages

PXE with Acer Aspire One D150 ?

Hello
We are about to start testing Acer Aspire One D150 and I cant get it to
work with PXE boot, it wont find the NIC drivers. The NIC is "Atheros
something" and I dont even know where to start. Tha machine does not have a
CD so I cant boot with the boot-cd either...
I tried putting in the new imaging files from zdm7sp1ir3a_hp3 (feb -09) but
same result, coudnt find NIC.
Please advice.

How bloody hard can it be for the Novell-people to post an image which works
for Aspire one D150 ? I dont have the knowledge to compile this stuff
myself, I hate when this happens as soon as we are testing new hardware...
So... there isnt a working image today ? :(
/D
"mpullen" <[email protected]> skrev i meddelandet
news:[email protected]...
>
> Thomas--
>
> A couple of days ago 'I posted a similar request in this forum'
> (http://forums.novell.com/novell-prod...ml#post1753904),
> which included the information you've requested:
>
> Attansic (Atheros) AR8114 "atl1e" NIC (device ID 0x1969 0x1026)
>
> Same as Dan, we've tried using the 'Feb 2009 imaging driver update'
> (http://download.novell.com/Download?...d=aC2y2x_7o_Q~) (initrd dated
> 02/21/2009). The "atl1e" driver is -not- in that update, nor in the
> 12/20/2008 driver update (initrd 12/20/2008), nor the 11/18/2008 initrd
> we had been using originally. The atl2 driver apparently included in the
> 12/20/2008 update (but excluded from the 02/21/2009 update) -does not
> work- with the D150's NIC.
>
> The 'vendor website' (http://partner.atheros.com/Drivers.aspx) does not
> offer a Linux driver for the L1e NIC (the L1e is -different- from the
> L1); however, 'a source file'
> (http://jan.ucc.nau.edu/wal2/l1e-linux-v1.0.1.0.tar.gz) for a atl1e
> Linux driver is linked in an article at 'ATL1E Linux Driver for Ethernet
> controller: Attansic Technology Corp. Unknown device 1026 (rev b0)'
> (http://jan.ucc.nau.edu/wal2/atheros_attansic.html). Unfortunately, the
> build instructions there are for Ubuntu 8.04, which isn't helpful in a
> SUSE environment.
>
> I would love to learn to compile this myself, but cannot find a Linux
> environment in which has the right kernel source (2.6.16.60-0.21) for
> the Feb 2009 update (nor even for 2.6.16.46-0.12, the kernel from our
> previous stable imaging environment.) I've tried to 'follow the
> instructions in the Zen 7 Admin Guide'
> (http://www.novell.com/documentation/...a/a74bm8u.html),
> but don't quite have the Linux knowledge depth yet to fill in the gaps
> necessary to for it to work in our environment. Any hints on this would
> be welcome here; I'd certainly post a working driver back here if we can
> get one made!
>
>
> Thanks!
>
> Mike Pullen
> Computer Tech
> School District of Baraboo, WI
>
>
> --
> mpullen
> ------------------------------------------------------------------------
> mpullen's Profile: http://forums.novell.com/member.php?userid=46061
> View this thread: http://forums.novell.com/showthread.php?t=365473
>

[SOLVED] Questions on Acer Aspire One netbook resolution

I've been digging through the wiki and googling everything, but I just can't figure out how to get the dang resolution right!
I've got an Acer Aspire One (D257, model ZE6) and technically, it should be 1024 x 600. Everything seems like it's the right size, but it's just slightly blurry and looking at it makes me a bit dizzy, like it's just slightly off. I've read that the Acer netbooks are SIZED to 1024x600 but use the RESOLUTION of 1024x768. Could anyone confirm this? Am I way off base?
The wiki suggests using xrandr to change the resolution, but I get the BADMATCH error. The solutions I googled mostly involve editing an xorg.conf, which doesn't exist. Trying to generate it myself always fails (xorg -configure, which always leads to "number of created screens does not match number of detected devices").
Maybe I've just missed something really obvious... But I can't seem to find it.
Last edited by DevPug (2013-07-27 17:41:41)

WonderWoofy wrote:There is the kernel driver, which is the i915 module from the kernel, and then there is the Xorg driver, which is provided by the xf86-video-intel package. Do you have both?
OH MY GOD. I followed the wiki to a T, but when I double-checked, I didn't have i915 listed in the MODULES="" line. So I must have not saved it, in my hurry to get everything going. My desktop looked okay-ish, but my web browser was resizing text improperly, hence the 'dizzy' effect.
Thank you from the bottom of my heart for catching my silly oversight!
Gusar wrote:I wouldn't say "crappy display", I'd say you don't like the default anti-aliasing.
This is also true, though... My next task is to find better anti-aliasing that I can get along with. The default just isn't cutting it, now that I can see it clearly.
Last edited by DevPug (2013-07-27 17:57:58)

[HOWTO] Installing Arch Linux stable release on Acer Aspire One 522

[This is a work on progress and my first howto ever]
These steps will teach you how to install ArchLinux x64 stable release (currently 2010.05) on Acer Aspire One 522 from an existing ArchLinux (your desktop computer)
As you need a 2.6.37+ kernel to make networking work on the AO522, installing stable release as is won't work.
This Howto borns with the intention to address this problem.
You need to be familiarized with Linux internals to follow this howto.
(Expect this howto to become useless with new stable releases of ArchLinux.)
Remember to make a backup of your Windows 7 Starter system before installing ArchLinux.
I did a full raw copy of the harddisk by using systemrescuecd, an external harddisk and dd utility:
Just boot with systemrescuecd
Mount your external harddisk on /mnt/floppy for example
Clone harddisk with: dd if=/dev/sda |gzip -c > /mnt/floppy/ao522.img
This process took me a lot of time since my external harddisk is USB-1 (almost an entire evening)
Result image was about 22GB size
This image will restore partition table, boot sector and all data if things go wrong.
I followed some of the steps from this guide: https://wiki.archlinux.org/index.php/In … ting_Linux
If you have some Gentoo Linux experience you will find those steps really familiar.
You will need 2 USB pendrives or similar storage options.
One is needed to boot into your netbook, and the other to store our custom archlinux build.
Making an updated ArchLinux system
1) Make a local dir on your existing linux system
# mkdir ./newarch
2) Install pacman database on it
# pacman -Sy -r ./newarch
3) Install base system
# pacman -S base -r ./newarch
4) Let's chroot inside
# cp /etc/resolv.conf ./newarch/etc/
# cp /etc/pacman.d/mirrorlist ./newarch/etc/pacman.d
# mount -t proc proc ./newarch/proc
# mount -t sysfs sys ./newarch/sys
# mount -o bind /dev ./newarch/dev
# chroot ./newarch /bin/bash
5) Edit configuration files
# nano -w /etc/rc.conf
# nano -w /etc/hosts
# nano -w /etc/mkinitcpio.conf
Forget /etc/fstab for now since you don't know what partitions to use yet
6) Generate kernel image
# mkinitcpio -p kernel26
7) Generate locales
# nano -w /etc/locale.gen
# locale-gen
8) Make a tarball with our custom ArchLinux
# exit
# umount ./newarch/proc
# umount ./newarch/dev
# umount ./newarch/sys
# tar -cvpf newarch.tar ./newarch
9) Copy this tarball to an USB pendrive or external harddisk
10) Boot your netbook with a Linux bootable USB stick (I used systemrescuecd, and remember to pick the x64 bit kernel at grub screen)
You can use any linux distribution with usb bootable options. I suppose ArchLinux works too
To install SystemRescueCD on an USB stick follow this tutorial -> SystemRescueCD on usb stick
Insert the usb stick on your netbook, switch on, hit F2 to enter BIOS menu, and choose to boot from USB as first option. Save and Exit.
You should be booting into SystemRescueCD without any problem.
After initialization you will end in a root prompt.
11) Let's partition the disk
You will find 3 partitions if this is your first time:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 488397167 229312696 7 HPFS/NTFS/exFAT
My recomendation is to leave sda1 and sda2 intact, as they have the recovery information to restore Windows 7 Starter
You have plenty of space with sda3, about 230G.
So run fdisk/cfdisk and delete /dev/sda3
Now create a 100M partition for boot
Now create a Extended partition with all the space left
Now create a 1GB logical partition for swap
Now create a 10-15 GB logical partition for root system
And finally a logical partition for our home partition with all space left
Your partition table should look like this:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 29771775 102400 83 Linux
/dev/sda4 29771776 488397167 229312696 5 Extended
/dev/sda5 29773824 31821823 1024000 83 Linux
/dev/sda6 31823872 63281151 15728640 83 Linux
/dev/sda7 63283200 488397167 212556984 83 Linux
12) Create filesystems
I choosed ext2 for boot, and reiserfs for root and home partitions.
# mke2fs /dev/sda3
# mkreiserfs /dev/sda6
# mkreiserfs /dev/sda7
# mkswap /dev/sda5
13) Mount partitions
# mkdir arch
# mount /dev/sda6 arch
# mkdir arch/boot
# mount /dev/sda3 arch/boot
# mkdir arch/home
# mount /dev/sda7 arch/home
14) Copy our custom ArchLinux build on it
# mount /dev/sdb1 /mnt/floppy (for example)
# cd arch
# tar -xvpf /mnt/flopy/newarch.tar
15) Configure /etc/fstab
Mine is as follows:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda3 /boot ext2 defaults 0 1
/dev/sda6 / reiserfs defaults 0 1
/dev/sda7 /home reiserfs defaults 0 1
/dev/sda5 swap swap defaults 0 0
16) Chroot in your new system
# mount -t proc proc ./proc
# mount -t sysfs sys ./sys
# mount -o bind /dev ./dev
# chroot ./ /bin/bash
17) Install grub
# grub-install
Edit /boot/grub/menu.lst to suit your needs
Mine looks like this:
timeout 5
default 0
color light-blue/black light-cyan/blue
title Arch Linux
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26.img
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26-fallback.img
title Windows 7 Recovery
rootnoverify (hd0,0)
makeactive
chainloader +1
As you see, you can restore Windows 7 Starter from Grub.
18) Change root password
# passwd
19) Add a regular user account
# useradd -G video,audio,users -m username
# passwd username
20) You're done!
# exit
# cd ..
# umount ./arch/proc
# umount ./arch/dev
# umount ./arch/sys
# umount ./arch/boot
# umount ./arch/
# reboot
Remove the usb stick from your netbook.
If all went ok, you will be inside your new stable and updated ArchLinux system
Next post is reserved for software configurations specific to the Acer Aspire One 522
Last edited by tigrezno (2011-04-20 12:22:38)

Using acpid to achieve the following:
- Change screen brightness when operating in battery mode
- Power off when the power button is pressed
- Suspend when the lid is down
- Reduce CPU frequency speed to maximize battery usage
Remember that system suspend is only supported by ati free driver xf86-video-ati
1) Install acpid daemon and cpufrequtils
# pacman -S apcid cpufrequtils
2) edit acpid handler script
# nano -w /etc/acpi/handler.sh
Change the following section:
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
echo -n $minspeed >$setspeed
#/etc/laptop-mode/laptop-mode start
00000001)
echo -n $maxspeed >$setspeed
#/etc/laptop-mode/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
for:
ac_adapter)
case "$2" in
ACAD)
case "$4" in
00000000)
echo 3 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 800Mhz
cpufreq-set -c 1 -f 800Mhz
00000001)
echo 9 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 1000Mhz
cpufreq-set -c 1 -f 1000Mhz
esac
*) logger "ACPI action undefined: $2" ;;
esac
Make sure you changed AC) for ACAD)
Now change this other section:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) logger "PowerButton pressed: $2" ;;
*) logger "ACPI action undefined: $2" ;;
esac
with:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) poweroff ;;
*) logger "ACPI action undefined: $2" ;;
esac
Change:
button/lid)
#echo "LID switched!">/dev/tty5
logger "ACPI group/action undefined: $1 / $2"
for:
button/lid)
pm-suspend && /etc/rc.d/network restart
logger "ACPI group/action undefined: $1 / $2"
Network restart is used because wlan0 will disconnect from AP after some time. You can try using iwconfig wlan0 essid <ap> key <key> instead of the network script, but haven't tested it myself.
3) Start acpid and load modules
# modprobe powernow-k8
# /etc/rc.d/acpid start
Add "acpid" to DAEMONS in /etc/rc.conf to start on boot
Add "powernow-k8" to the modules sections on /etc/rc.conf to load at boot
Stopping system freezes due to ethernet driver
The only way people have found to avoid freezes is by blacklisting atheros kernel drivers.
To do it at boot just edit /etc/rc.conf and change the MODULES line as this:
MODULES=(!ath9k !atl1c)
Reboot and you're done, but remember to not press the Wifi key, because it can freeze your system.
Correctly starting wireless at boot
I've found that standard scripts wont load properly my wireless lan. It gave an error telling you to use the WIRELESS_TIMEOUT variable and such.
To solve this, edit /etc/rc.d/network script and change the wi_up function by adding a second iwconfig command like this:
wi_up()
eval iwcfg="\$wlan_${1}"
[[ ! $iwcfg ]] && return 0
/usr/sbin/iwconfig $iwcfg
[[ $WIRELESS_TIMEOUT ]] || WIRELESS_TIMEOUT=2
sleep $WIRELESS_TIMEOUT
/usr/sbin/iwconfig $iwcfg
bssid=$(iwgetid $1 -ra)
It will do the trick and will start at boot correctly. This is not a solution but a fix.
Adjust Touchpad to disable false taps
What I did here is defining an area to be ignored. This area are 3 rectangles on top, left and right of the touchpad.
This means you can write and press space without having the cursor click out of the window and such.
# synclient AreaLeftEdge=150
# synclient AreaRightEdge=1300
# synclient AreaTopEdge=300
Also, add it to your /etc/X11/xorg.conf.d/10-evdev.conf:
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "AreaTopEdge" "300"
Option "AreaLeftEdge" "150"
Option "AreaRightEdge" "1300"
EndSection
You can play with those values. They just work for me.
Last edited by tigrezno (2011-04-23 13:49:48)

How do I install the latest version of Firefox on my Acer Aspire One running Linpus Linux Lite?

I have an Acer Aspire One Netbook. It runs "Linpus Linux Lite" OS. It came with Forefox 2 installed. I have searched the web for advice on how to upgrade to Firefox 3.5.
I had a go at it, I have now lost Firefox 2, but failed to install a later version.
Can someone tell me how t0 get either Firefox 2 back, or better still, unstall Firefox 3.5?
I should say that I'm a novice so I need really basic instructions.
If this plea for help doesn't work, I'll take my netbook to my local PC chap & ask for Windows to be installed on it!
Thanks.

See here:
http://linuxforums.org.uk/netbooks/install-firefox-5-on-an-acer-aspire-one-running-linpus-lite-linux/
for instructions on how to install Firefox 5 on an Acer Aspire One running Linpus Lite Linux.

[SOLVED] Acer Aspire One D250 LAN not detected.

Hi guys,
Cant seem to find anyone on the net that has the same problem as me, but here it goes.
I have a Acer Aspire One D250, Id really like to run linux on it. There are dozens of posts on the web explaining you need to install the drivers from the Atheros site because the output of lspci is wrong.
Well, the problem that i am having with Arch is that lspci doesnt even show my network card, and as soon as i boot, the light on the physical card turns on, but never goes off (almost like it hangs...)
Ive included the output of Arch's lspci where its not visible, and the output of the ubuntu live netbook remix where it is visible just as the wrong name.
Its almost like arch wants to load the wrong driver and then the card just freezes.... but i dont know, im not a fiull blown linux expert...
Hope someone can help me because its driving me crazy.
This is the output from the arch lspci:
# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
This is the output from the ubuntu netbook remix lspci:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
03:00.0 Ethernet controller: Attansic Technology Corp. Device 1062 (rev c0)
Last edited by kirothi (2009-10-09 08:40:23)

Kernel Installed from the testing repo, now im getting the following build errors:
# make install
make -C /lib/modules/2.6.31-ARCH/build SUBDIRS=/root/atheros_ln_driver/src modules
make[1]: Entering directory `/usr/src/linux-2.6.31-ARCH'
CC [M] /root/atheros_ln_driver/src/at_main.o
/root/atheros_ln_driver/src/at_main.c: In function 'at_request_irq':
/root/atheros_ln_driver/src/at_main.c:262: warning: passing argument 2 of 'request_irq' from incompatible pointer type
include/linux/interrupt.h:116: note: expected 'irq_handler_t' but argument is of type 'void (*)(int, void *)'
/root/atheros_ln_driver/src/at_main.c: In function 'at_probe':
/root/atheros_ln_driver/src/at_main.c:343: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:344: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:347: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:348: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:392: error: 'struct net_device' has no member named 'open'
/root/atheros_ln_driver/src/at_main.c:393: error: 'struct net_device' has no member named 'stop'
/root/atheros_ln_driver/src/at_main.c:394: error: 'struct net_device' has no member named 'hard_start_xmit'
/root/atheros_ln_driver/src/at_main.c:395: error: 'struct net_device' has no member named 'get_stats'
/root/atheros_ln_driver/src/at_main.c:396: error: 'struct net_device' has no member named 'set_multicast_list'
/root/atheros_ln_driver/src/at_main.c:397: error: 'struct net_device' has no member named 'set_mac_address'
/root/atheros_ln_driver/src/at_main.c:398: error: 'struct net_device' has no member named 'change_mtu'
/root/atheros_ln_driver/src/at_main.c:399: error: 'struct net_device' has no member named 'do_ioctl'
/root/atheros_ln_driver/src/at_main.c:403: error: 'struct net_device' has no member named 'tx_timeout'
/root/atheros_ln_driver/src/at_main.c:411: error: 'struct net_device' has no member named 'vlan_rx_register'
/root/atheros_ln_driver/src/at_main.c:414: error: 'struct net_device' has no member named 'poll_controller'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_error_detected':
/root/atheros_ln_driver/src/at_main.c:834: error: 'struct net_device' has no member named 'priv'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_slot_reset':
/root/atheros_ln_driver/src/at_main.c:857: error: 'struct net_device' has no member named 'priv'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_resume':
/root/atheros_ln_driver/src/at_main.c:884: error: 'struct net_device' has no member named 'priv'
make[2]: *** [/root/atheros_ln_driver/src/at_main.o] Error 1
make[1]: *** [_module_/root/atheros_ln_driver/src] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.31-ARCH'
make: *** [default] Error 2
again, no internet information available, although someone posted about editing the source file, but getting send and transmit errors once the driver was loaded into the kernel.
thanks for the help.
P.S. compiling this thing under ubuntu was no problem, and it worked instantly.

[SOLVED] Acer Aspire One - Wireless issue + Wpa_supplicant

Hi there!
I've been using arch on both my desktop and laptop for a while, with wpa_supplicant working perfectly for both of them (University 802.1x auth) I have a config file which works perfectly on the same wireless network with my laptop, but on the netbook I just can't seem to get on it. It's an Acer Aspire One - A150.
This computer uses as we know an atheros chip, which I just can't seem to get working. My laptop on the other hand uses an ipw2200 chip which works fine.
I've installed the madwifi modules, and when doing iwconfig i can see wlan0 listed. If i try to scan for wireless ap's with "iwlist wlan0 scan" it does not find anything.
Doing "wpa_supplicant -Dmadwifi -iwlan0 -c/..../wpa_supplicant.conf -dd " produces the following error
[henrik@scribble ~]$ sudo wpa_supplicant -Dmadwifi -iwlan0 -c/home/henrik/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/home/henrik/wpa_supplicant.conf' driver 'madwifi' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/home/henrik/wpa_supplicant.conf' -> '/home/henrik/wpa_supplicant.conf'
Reading configuration file '/home/henrik/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
fast_reauth=1
Line: 485 - start of a new network block
ssid - hexdump_ascii(len=7):
65 64 75 72 6f 61 6d eduroam
key_mgmt: 0x1
eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00
identity - hexdump_ascii(len=21):
68 72 69 30 30 33 40 6d 61 69 6c 62 6f 78 2e 75 xXxXXX@xxxxxxx
69 74 2e 6e 6f xx.com
password - hexdump_ascii(len=8): [REMOVED]
phase2 - hexdump_ascii(len=13):
61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2
priority=10 (0xa)
Priority group 10
id=0 ssid='eduroam'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
wpa_driver_madwifi_init: failed to set wpa_supplicant-based roaming
WEXT: Operstate: linkmode=0, operstate=6
Failed to initialize driver interface
Failed to add interface wlan0
Cancelling scan request
Cancelling authentication timeout
[henrik@scribble ~]$
I really hope some of you have a suggestion to what I can do to fix this, as it's really annoying only being able to use wired.
What I find wierd, is that "iwlist...scan" does not work.
Thanks in advance
-Henrik
Last edited by henrikken (2009-03-24 15:49:54)

two things:
1. Your computer should be using the ath5k driver for the ar5007 chipset that your netbook has... and
2. If the opensource approach doesn't work for you, build this driver.
p.s. (wlan0 will be renamed to ath0)
#Contributor: KJoN <[email protected]>
pkgname=madwifi-hal
pkgver=0.10.5.6
pkgrel=svn
pkgdesc="Multiband Atheros Drivers - hal 0.10.5.6 - svn"
arch=('i686' 'x86_64')
url="http://svn.madwifi-project.org"
license=('GPL')
depends=('subversion')
provides=('madwifi' 'madwifi-utils')
source=()
md5sums=()
build() {
cd $startdir/src
svn co http://svn.madwifi-project.org/madwifi/branches/$pkgname-$pkgver
cd $pkgname-$pkgver
make
make DESTDIR=$startdir/pkg install
cp $startdir/pkg/usr/local/* $startdir/pkg/usr -vR
cp $startdir/pkg/usr/share/* $startdir/pkg/usr -vR
rm $startdir/pkg/usr/{local,share} -r
errr... remember to blacklist ath5k on MODULES on your rc.conf and please, run depmod -a after installing this package.
Luck with your issue

Can't boot Arch from USB on Acer Aspire One...

Hi All,
New to the forums, relatively new to Linux. I've tried several distros including #!, U/K/Xubuntu, Mint, Kuki, Puppy and Wolvix. However none of them, except maybe Mint, have played very nicely with my Acer Aspire One netbook. Even Kuki was a bit of a disaster, though I liked the Midori browser, first time I'd used it was under Kuki.
Intro aside, I want to try Arch. I am not scared of a bit of hands-on work via CLI, although am certainly no expert when it comes to CLI & Linux!
The problem is, I created a USB install for the latest 32bit version of Arch using Unetbootin (I tried both under Windows and Linux, creating USB live sticks with both). However when I try to boot from USB, all goes well until just after a message during the boot process appears. I forget off the top of my head what the error message says, though it appears after successfully waiting 30 seconds to discover a SCSI drive (or something along those lines).
The error has nothing to do with the drive, it's related to the step in the boot process that comes after that. Whatever the message is (I'm at work so cannot access logs or anything right now) it ends up asking me to resolve from a CLI prompt, which then leaves me with a prompt dialog, or to restart and try again.
Nothing seems to work so I am not sure what I am doing wrong or if it might be a bug with Unetbootin or a bug with the latest version of Arch? Or simply a good old fashioned ID10T error?
Any help would be greatly appreciated. Thanks!

Thanks! I'll mark this as an ID10T error for now then. I'll give the USB install image a try tonight. On a side note, does Arch come with Skype pre-installed and if not, is it relatively simple to install a la the *.deb package install?

Firefox Slow Even When Offline on Acer Aspire One ao751h-1145

I have a 2gb RAM, 1.33 Ghz Intel Atom CPU Z520, and a fresh install of Windows 7 Ultimate on my Acer Aspire One ao751h-1145. I have no viruses and no programs running in the background. I've installed and uninstalled various versions of Firefox (4, 11, 12) and even upon a fresh install before I edit preferences, bookmarks, or add-ons, the PROGRAM ITSELF is super slow. It isn't using any more RAM or processer speed that it should, however. What it does: Menus are slow to open, scrolling is jumpy, and switching from tab to tab takes like 2 seconds. Internet Explorer 8 works just fine, as do all other programs on the computer. Also, it works fine in Safe Mode. I can't find anything regarding this issue online. Help!

Thanks for reply. But, drivers are up to date. However, I found on this page (https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers) that I might want to disable hardware acceleration. I did that through the options menu and Firefox is "usable," but still not what I'm used to on other computers and still not as fast as IE on the same computer. Since turning of the hardware acceleration helped, what else can I do along the same lines to speed it up more? I know a 1.33GHz processor is plenty fast enough to run only firefox by itself. The computer I'm on now (my non-netbook) runs at 700MHz when on batteries and has no performance issues. I hope I can get it because I don't want to use another browser! :(

KDE 4.4.0 crashes when logging in on Acer Aspire One

Hello,
I just made an ArchLinux fresh installation on my Acer Aspire One, A1-ZG5. This is my problem: when I log in to KDE, the splash screen comes and then screen freezes. There is one gray window in the top of the screen that just flashes, no windows nor plasma can be seen. I have installed other KDE distros in the same netbook and worked well. I had had the same problem once, when I installed KDE 4.3.1, and never could fix it... KDE seems to be working like in the background; config files are still being created with the frozen screen...any ideas?...Thanks for your help!...:rolleyes:

is your disk full?
if not, try to switch off the services, remone network-manager plasmoids, and try again

Wireless with acer aspire one linux linpus

hi everyone, have just had replacement hh3 which is connecting ok wireless to my laptop, but my wife has little acer aspire one which used to connect ok but now wont, it does pick up the fon sometimes but i would like it how it was and connecting directly to the hub. it does connect ok using a cable but not wireless. any help or suggestions please.
Solved!
Go to Solution.

I would expect if you deleted all the existing wifi connections and then reboot. look for wireless connections available then select your ssid then connect - it will ask for key/password then enter then connect. it would normally save infor but I am not a linux user - works in windows
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Webcam troubles Acer Aspire One

I have strange webcam behaviour on me Acer Aspire One A110
After netbook turn on, it works fine till closing netbook cover. After this skype, cheese, xawtv don't shows anything till reboot.
Right after turning on
dmesg
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
lsusb
Bus 001 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Closing and open netbook cover
Mar 20 09:05:05 greenhawk kernel: usb 1-5: USB disconnect, address 2
Mar 20 09:05:05 greenhawk kernel: usb 1-5: new high speed USB device using ehci_hcd and address 3
Mar 20 09:05:05 greenhawk kernel: usb 4-1: new full speed USB device using uhci_hcd and address 2
Mar 20 09:05:05 greenhawk kernel: usb 4-1: not running at top speed; connect to a high speed hub
Mar 20 09:05:06 greenhawk kernel: usb 4-1: configuration #1 chosen from 1 choice
Mar 20 09:05:06 greenhawk kernel: uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Mar 20 09:05:06 greenhawk kernel: input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input11
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Note: bus and Device changed 1:2 to 4:2
And that's all - webcam not operational till reboot
cheese -v
Cheese 2.28.1
Probing devices with HAL...
Found device 064e:d101, getting capabilities...
Detected v4l2 device: Acer Crystal Eye webcam
Driver: uvcvideo, version: 256
Capabilities: 0x04000001
Probing supported video formats...
libv4l2: error turning on stream: Ошибка ввода/вывода (Input/Output Error on Russian)
Any advices to solve this?
PS: Sorry for ugly English, not my native

Additional information
I made two lsusb -s b:d -v dumps before and just after netbook cover closing. There are results:
diff ./acer_before.lsusb ./acer_after.lsusb
2c2
< Bus 001 Device 003: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
> Bus 004 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
277c277
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x03ff 1x 1023 bytes
297c297
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x0200 1x 512 bytes
317c317
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x0180 1x 384 bytes
As you can see, magicaly sizes of data packets was changed

Roxio won't open in Desktop Manager Ver 4.5 on Acer Aspire one

When I try to open Roxio, in Desk Top Manager V 4.5, it gives a message that my screen resolution should be set to 1024 x 768 but my Acer aspire One is only capable of 1024 x 600. It works fine on another notebook and my desktop. I'd really like to get my music and jpg files from my 8830 to this new laptop also. Does anyone know of a work around for this problem? Thanks.
Solved!
Go to Solution.

You can do it with windows explorer, connect the device to the pc and open windows explorer, and you can manage all the pictures and songs, becuase the device is detected like a external hard drive
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

My Acer Aspire One (Linpus lite) has downloaded firefox 4 but I can't open it!

My firefox browser informed me automatically that there was a more recent version and I agreed to install it. Since then whenever I click on the icon the timer spiral operates for a second then nothing happens.
Could sort this in windows but the Acer One makes accessing these sorts of things complicated for non-linux aware people - any help gratefully received!

If your AA1 is still behaving properly (except for Firefox) see here:
http://linuxforums.org.uk/netbooks/install-firefox-4-on-an-acer-aspire-one-running-linpus-lite-linux/

Airport Express won't work with Acer Aspire One

I've recently set-up a wifi network for my parents. They have a cable modem from which an ethernet cable runs to their Vonage modem. From there, another ethernet runs to the Airport Express (set to Bridge Mode). Wifi uses WPA2 Personal encryption.
My MacBook Pro as well as my dad's Dell laptop (Vista) can connect just fine and browse the web, no problemo.
However, my Mom's Acer Aspire One netbook (Win XP) keeps on saying "Acquiring network address" and kind of just hangs there. I've tried resetting the Airport Express to no avail. Does anyone have any ideas what could be causing this? I'm open to any suggestion guys, thanks!

I'll take a quick pass, but no guarantees as I'm not a PC guy.
XP, depending on the version installed on the Acer may not fully support WPA2 Encryption. Or, if it does, you may need to change some settings on the PC to use TKIP, not AES associated with WPA2.
It might be a bit easier to switch the security to WPA/WPA2 Personal on the AirPort Express and give that a try.
AirPort Utility > Manual Setup > Wireless Tab > Wireless Security.
The same TKIP/AES thing may still apply on the ACER though, so you'll need to investigate if things are still sticky on the ACER.
Finally, my PC friends tell me that 90% of all connection problems on a PC can be traced to the Firewall settings and/or anti-virus settings. You may have to go into the applications to specifically allow the connection to the Express.

[solved] Installing on Acer Aspire One D150

Similar Messages

Maybe you are looking for