Finder Cannot Find

I cannot find (Command F) files on my external drives with Finder.
I have 1000's of jpeg files on a drive and Finder returns 0 files when I search for file names that contain JPG. I have tried this on FireWire 800 and USB2 and finder refuses to find any files.
I have my external drives excluded from Spotlight to avoid excessive indexing so I can't use that either.

[Link to EasyFind download|http://www.macupdate.com/info.php/id/11076/easyfind]
[FindAnyFile|http://apps.tempel.org/FindAnyFile> - "This is a free program for Mac OS 10.4 and later that lets you search for files on your disks, primarily on HFS formatted ones." Read the [FAF FAQ|http://apps.tempel.org/FindAnyFile/#faq] for information about fast searching capability.

Similar Messages

AIO remote cannot find my printer HP 3520

Printer is on the same network, I can access the printer's admin page via a web browser (by typing the IP), but AIO remote app or the HP Utility app on my MacBook Air cannot detect the printer at all.

Hi Joesly,
Welcome to the HP Support forums. I gather that you are unable to print from your MacBook Air to your HP 3520 printer and that the HP All-in-One Printer Remote app is not finding the printer.
To better assist you, would you please provide some further information:
What make/model/product number of HP printer do you have (there are 9 different 3520 model printers)? How Do I Find My Model Number or Product Number?
How is the printer connected (USB cable, ethernet, or wireless)?
What version of Mac OS X are you using on your MacBook Air? OS X: Finding your OS version and build information
Have you installed the full feature software and driver for the printer or are you using the basic driver built into Mac OS X?
What device have you downloaded and installed the HP All-in-One Printer Remote app on?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

My itunes wont open and i cannot find an itunes .exe file

my itunes wont open and i cannot find an itunes .exe file

I have this same problem and when I go to the control panel to uninstall itunes, I can't do that either. I have been trying to uninstall so I can reinstall. Hopefully someone has an idea.

Cannot open new finder window after upgrading to Maverick 10.9.2

Hello friends,
I am experiencing a very strange issue.
I cannot access the contents of my files via the finder. I can access my files via open or save as from separate applications.
I have tried the following:
Finder ---> New Finder Window (finder flashes or switches to an existing open application)
Double-clicking on existing folders (finder flashes or switches to an existing open application)
Double-clicking on the icon of my Macintosh HD (finder flashes or switches to an existing open application)
From Dock, click on downloaded document and choose "Open in Finder" (finder flashes or switches to an existing open application)
From iPhoto, select a photo, and select "Reveal in Finder" (nothing happens)
Restart machine has not fixed the issue
After several tries, I get an error displaying that there was an issue with the finder.
I am running Maverick 10.9.2

Unfortunately, Finder is a part of OS level files. So, we have a couple of options.
First off, let's see if there's a software conflict somewhere. Boot into safe mode (boot the comptuer with the shift key held down) and try there. If it works in safe mode, odds are we either have a 3rd party KEXT or application blocking its launch. Check your login items (Apple -> System Preferences -> users & groups -> select your user -> login items), and disable them.
Also check your startup items (you'll have to do this in safe mode as it requires Finder).
/library/startupitems
If Safe Mode/removing startup/login items doesn't work:
First, boot in to the recovery partition (boot the computer with command + r held down). Launch disk utility, and repair both disk permissions and the disk. Reboot and try again.
If that fails, boot into recovery again, and reinstall.

When I open up my emails and close them, they disappear and I cannot find them. Where are they going? Is there a setting that I have to change?

Once I open up my emails they disappear and I cannot find them anymore. Is there a setting that I need to change to stop this from happening?

Are you tapping any of the icons at the of the Mail app after opening them, or do they disappear without you doing anything ? And if you have more than one account on the iPad, does it happen on your other accounts as well ?

The app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new.

the app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new for christmas.

See the following to purchase earlier, compatible version for iOS 6
App Store: Downloading Older Versions of Apps on iOS - Apple Club

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

VM created on Win 8.1 Pro Laptop cannot find win 7 iso file on USB

VM cannot find USB to load Win 7
I have a Windows laptop with Win 8.1 Pro installed. I turned on Hyper-V and created a VM. Everything worked up to that point. I also downloaded the Win 7 iso and placed it on a USB thumb drive. I also downloaded the Win 7 installer.
When I "start" the VM, I get a black screen with a message the VM could not load an OS.
It appears to me that the VM does not know where to look for the OS. I cannot find any way to tell it where to look.
I spent over $300 for upgrades to Win 8.1 Pro and a licensed copy of Win 7 so I could run Win 7 on my laptop as I need it to run UPK (which is not compatible with Win 8).
As a last resort I went to the Micrsoft store in Miami and offered to buy a Surface Pro 3 if they would install the VM and Win 7 on that for me. They said it was very easy to do and I would have no problems, etc., etc., etc. In other words they did not have
a clue about what I was talking about.
I hate to see over $3000 worth of hardware collecting dust on my closet shelf because I cannot use them. I am hopeful someone here can help a non-techie make this thing work.
Thanks in advance,
Dennis
PS - Went to the Apple store last night and was shown a MacBook Air with Parallels installed. It was running Apple stuff on the Apple OS and MS Office 365 on Win 7. It was all very seamless so am leaning very much to going with Apple as a solution.

You don't say that you attached the iso to the VM. The easiest way to do
that is to connect to the VM and then on the console, pull down the
"Media" menu, Select "Insert Disk", then browse to the ISO and select it.
Then under the "Action" menu, select "Reset".
You can also mount an iso in the settings for the VM.
Bob Comer

In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

Hi Bruce and fruhulda,
ok, I found the keyboard viewer, it only shows the traditional symbol 'return'. something like a sideway u-turn continued with the arrow under. This is the Canadian or US keyboard.
btw thanks for your suggestion.

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

I have downloaded the latest pages update on my iPad, but my iMac still has version 4.3 and I cannot find out how to update it only desktop. When I try to send something from my iPad pages to via email to be opened on my desktop in Pages, it won't open P

I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?

The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it.

I cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud

i cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud, i'm using PC

Please try clearing cache and cookies. If that doesn't help you can try disabli9ng add-ons and see if it help. [[Safe Mode]] is to disabled add-ons.

I cannot send email over 3G. Receiving email is ok. Using wifi from my landfibre allows me to send email. No idea where to find the solution. Suggestions please. Thanks ia

I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
TheOne

You need a DATA service enabled by your carrier to be able to send e-mail via thier network. Do you have a data plan with your carrier ? If so - is it enabled ?
Can you access internet thru your network (not wifi) ?

I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file. I have run a number of searches and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps. The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members. I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

My apologies Eadeszoo I believe our support agents are unavailable on January 1.
Are you able to copy the contents of the DVD to your computer? Are you receiving any particular error messages when you are trying to install? Finally which operating system are you using?

I cannot figure out how to make the text larger on an incoming email. The finger method doesn't work and I cannot find any toolbar with which to do it. I could find nothing in settings also. Plese help and thank you.

I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.

Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John.

Finder Cannot Find

Similar Messages

Maybe you are looking for