Finder CPU Utilization

Many times a day, the Finder will start consuming 100% CPU (half of the total) for several minutes at a time. During this time, not a lot is going on, there is no unusual (or mabye none at all) disk activity no unusual network activity. The actual utilization totals around 100% although the work seems to be shared between both CPUs. If one goes up, the other goes down. This activity also appears to be "nice" in that it doesn't detract from the overall system's responsiveness.
mds will often do the same thing without any indication that it is supporting Spotlight.
Sometimes, both will chip in together and run my "idle" usage to max on both CPUs.
This is a new behavior on 10.6.1. I've never seen both CPU's on the peg unless I was rendering a QT X movie.
Does anybody know what these processes are doing?
null

It is possible that something is merely in process at the time, but it's sort of unusual for the Finder to pop up like that as opposed to the process itself. You might try a little cache cleaning to see if that helps:
Delete caches to resolve some startup problems:
Boot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN after each commandline:
/sbin/fsck -fy
If you receive a message that says "*** FILE SYSTEM WAS MODIFIED ***" then re-run the command until you receive a message that says "** The volume (nameofvolume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way.
If you were successful then enter:
/sbin/mount -uw /
rm -rf /System/Library/Caches/*
rm -rf /Library/Caches/*
reboot
I suggest you print out the above to be sure you do not make any errors when entering the commands. When in single-uwer mode you have 'root' access, so it's important that you not make any mistakes.
It's also possible the Finder is writing to a log file that is pretty large thus taking up more time to process. But on my Mac Pro I don't ever see any core running at 100% unless it's due to a running application that simply requires it - like video playback and the like.

Similar Messages

API's to find CPU Utilization of Current Process

Hi World,
Do Java 5 or Java 6 has any new API's for finding the CPU Utilization of the current process. Is there any other way of finding the CPU Utilization of current Process.
Regards,
Gopi

Don't double post. I've removed the thread you started in the Java Programming forum 2 minutes after this one, with the identically same question.
db

Code for finding CPU utilisation for executing query

Hi, i need code for finding CPU utilisation for executing the particular query.

Use session tracing, then in trace file you can find cpu utilization for particular statement on each phase: parse, execute, fetch and the overall.
Or You can use the dbms_utility.get_cpu_time (if your database is 10g) in pl/sql:
declare
cpt1 pls_integer;
cpt2 pls_integer;
cputime pls_integer;
begin
cpt1:=sys.dbms_utility.get_cpu_time;
<some code here>
cpt2:=sys.dbms_utility.get_cpu_time;
cputime:=cpt2-cpt1;
end;
good luck

How to find the CPU utilization from the portal front end

HI Guys,
I want to find the CPU utilization from the portal front end browser screen.Can you please let me know how to find this and also the path to find it.
And how to find the CPU utilization from the server.What is the command to find the CPU utilization at unix level.
Regards,
Krishnam.

hi you can create transient field in view object indicate to visibility of row (boolean ) and create view criteria that show only rows that are able to be visible according to transient attribute and at the update process set the attribute to true inside entityImpl class

How to find CPU and Memory Utilization

Hi,
How to find CPU and Memory Utilization of my application which is
running in solaris workstation.My application has a management console in which we need to update the cpu and memory periodically.
(Notr : Usage of JNI is restrcited)
Thnx and Rgds,
Mohan

There is no CPU usage API in Java. You need some JNI code. For memory usage see the Runtime methods:
     * Get information of memory usage: max, total, free and (available/used).
     * <ul>
     * <li>Max is the maximum amount of bytes the application can allocate (see also java options -Xmx). This value is fixed.
     * If the application tries to allocate more memory than Max, an OutOfMemoryError is thrown.
     * <li>Total is the amount of bytes currently allocated from the JVM for the application.
     * This value just increases (and doesn't decrease) up to the value of Max depending on the applications memory
     * requirements.
     * <li>Free is the amount of memory that once was occupied by the application but is given back to the JVM. This value
     * varies between 0 and Total.
     * <li>The used amount of memory is the memory currently allocated by the application. This value is always less or equal
     * to Total.
     * <li>The available amount of memory is the maximum number of bytes that can be allocated by the application (Max - used).
     * </ul>
     * In brief: used <= total <= max
     * <p>
     * The JVM can allocate up to 64MB (be default) system memory for the application. If more is required, the JVM has to be started with the Xmx option
     * (e.g. "java -Xmx128m" for 128 MB). The amount of currently allocated system memory is Total. As the JVM can't give back unallocated memory
     * to the operating system, Total can just increase (up to Max).
     * @return Memory info.
    static public String getMemoryInfo() {
        StringBuilder sb = new StringBuilder();
        sb.append("Used: ");
        sb.append(toMemoryFormat(getUsedMemory()));
        sb.append(", Available: ");
        sb.append(toMemoryFormat(getAvailableMemory()));
        sb.append(" (Max: ");
        sb.append(toMemoryFormat(Runtime.getRuntime().maxMemory()));
        sb.append(", Total: ");
        sb.append(toMemoryFormat(Runtime.getRuntime().totalMemory()));
        sb.append(", Free: ");
        sb.append(toMemoryFormat(Runtime.getRuntime().freeMemory()));
        sb.append(")");
        return sb.toString();
    }//getMemoryInfo()

Can we control user request w.r.t Memory and CPU utilization in Oracle 10g

Dear All,
We are having Production with Oracle 10.2.0.4 (5 Node RAC, 32Gb RAM each) running on RHEL5.2 with 12000 Users. We have some schema say FIN, HRMS, SALES, REPORT and many dedicated users for those schemas. We need to control the user request against these schema with respect to Memory (or CPU utilization)
Suppose users using FIN schema can use Maximum 40 % of Total Memory, HRMS schema can use Max 20%, SALES can use Max 20% and REPORT can use Max 20%.
Is it possible to create any Service in Server side to handle this type of scenareo or any existing service which can be customised to fullfil this?
Please suggest me.......
Thanks,
Tusar
Edited by: gohappy on Jan 27, 2011 5:59 AM
Edited by: gohappy on Jan 27, 2011 6:00 AM

JDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
This means the session will continue to exist.
It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
by throwing memory and cpu at the problem.
When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
Paraphrasing William Jefferson Clinton: It's the application, stupid!
Sybrand Bakker
Senior Oracle DBA

Increase in CPU Utilization after migration from APEX 3.1.2 to APEX 3.2

Has any noticed any increase in CPU Utilization after migrating from APEX 3.1.2 to APEX 3.2?
Thanks,
Mark

Hi Mark,
Take a look at some of the usage reports within APEX (sessions, page views etc) to get an overall feel for where the time is being consumed.
You'll also find it useful if you can run a statspack report (or AWR, ASH etc) during a busy period to be able to drill down into where that CPU is being spent.
There's no magic answers here unfortunately, you need to track it down to where the time is being spent before working back up to find out where best to tune it.
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Xsun (high CPU utilization) on Solaris 10 Sparc

hi
i have sun blade 1500 and am running solaris 10 on it. the machine is a 2 CPU (750Mhz) 4GB Sparc with the lastest cluster patch.
The Xsun process is alway at 50% util and the windowmaker (wmaker) is at 27%.
The Xsun is alway using all available CPU and the machine is really slow.. any help on what patch will fix the Xsun process ? any operation on the machine increases the Xsun's CPU util.
thx
Sriram

Hi sridhar,
can i know which platform you are using....
if it is solaris,
can you paste the details of the prstat -L -p wlpid 1 1 ---> which gives the light wieght pid threads
and also (pstact wlspid) for lwpid to process id mapping
or you can follow these steps for finding which thread is causing the hight cpu utilization
1.find the highest usage lwpid in prstat output
2.find the lwpid in pstack output and get the matching thread number
3.convert the thread number to hexadecimal
4.find the hexadecimal thread number in the server thread dump (nid= xxx)
5.determine what thread was doing to cause the high cpu usage
you can find similar way if it is linux..
ps u -Lp wlspid and thread dump
Thank you,
Bob
Edited by: Bob on Sep 21, 2010 10:18 AM
Edited by: Bob on Sep 21, 2010 10:24 AM

Heavy CPU Utilization of Dictionary Query - After 9i to 10g Upgrade

Hi Friends,
We have migrated our production DB from Oracle 9i(Windows) to Oracle 10g(AIX) and after that a heavy cpu utilization query is coming frequently and hence many timeouts are happening in the application.
Application is connecting to the database through Java Application (JDBC).
Once the application service is started, below query is invoked and CPU takes around 20% continuously.
The interesting thing is this query is not owned by the application schema but by SYS and it's invoked from Application Schema.
We have raised an SR but still no luck.
Any help will be very much appreciated.
SELECT -- Packaged procedures with no arguments package_name AS procedu
re_cat, owner AS procedure_schem, object_name AS procedure_name, NULL
, NULL, NULL, 'Packaged procedure' AS remarks, 1 AS procedure_type
FROM all_arguments WHERE argument_name IS NULL AND data_type IS NULL AN
D package_name LIKE :3 ESCAPE '/' AND owner LIKE :4 ESCAPE '/' AND obje
ct_name LIKE :5 ESCAPE '/' UNION ALL SELECT -- Packaged procedures with a
rguments package_name AS procedure_cat, owner AS procedure_schem, obj
ect_name AS procedure_name, NULL, NULL, NULL, 'Packaged procedure'
AS remarks, 1 AS procedure_type FROM all_arguments WHERE argument_name IS
NOT NULL AND position = 1 AND position = sequence AND package_name L
IKE :3 ESCAPE '/' AND owner LIKE :4 ESCAPE '/' AND object_name LIKE :5
ESCAPE '/' UNION ALL SELECT -- Packaged functions package_name AS proce
dure_cat, owner AS procedure_schem, object_name AS procedure_name, NU
LL, NULL, NULL, 'Pa
Regards,
Savad
Edited by: user9292816 on May 9, 2011 4:35 AM

Hi,
We couldn't find anything in the alert log related to this.
But we have taken the explain plan from both DBs as shown below.
PLan of the Query in Oracle 9.2.0.8(Windows - Old DB )
SQL> select * from table(dbms_xplan.display());
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | | | |
| 1 | SORT ORDER BY | | | | |
|* 2 | FILTER | | | | |
|* 3 | TABLE ACCESS BY INDEX ROWID | ARGUMENT$ | | | |
| 4 | NESTED LOOPS | | | | |
| 5 | NESTED LOOPS | | | | |
| 6 | TABLE ACCESS BY INDEX ROWID| USER$ | | | |
|* 7 | INDEX RANGE SCAN | I_USER1 | | | |
| 8 | TABLE ACCESS BY INDEX ROWID| OBJ$ | | | |
|* 9 | INDEX RANGE SCAN | I_OBJ2 | | | |
|* 10 | INDEX RANGE SCAN | I_ARGUMENT2 | | | |
|* 11 | FIXED TABLE FULL | X$KZSPR | | | |
|* 12 | TABLE ACCESS BY INDEX ROWID | OBJAUTH$ | | | |
| 13 | NESTED LOOPS | | | | |
| 14 | FIXED TABLE FULL | X$KZSRO | | | |
|* 15 | INDEX RANGE SCAN | I_OBJAUTH2 | | | |
Predicate Information (identified by operation id):
2 - filter("SYS_ALIAS_1"."OWNER#"=:B1 OR EXISTS (SELECT /*+ */ 0 FROM
"X$KZSPR" "X$KZSPR" WHERE "X$KZSPR"."INST_ID"=:B2 AND
((-"X$KZSPR"."KZSPRPRV")=(-144) OR (-"X$KZSPR"."KZSPRPRV")=(-141))) OR EXISTS
(SELECT 0 FROM "SYS"."OBJAUTH$" "OBJAUTH$","X$KZSRO" "X$KZSRO" WHERE
"OBJAUTH$"."OBJ#"=:B3 AND "OBJAUTH$"."GRANTEE#"="X$KZSRO"."KZSROROL" AND
"OBJAUTH$"."PRIVILEGE#"=12))
3 - filter(("A"."ARGUMENT" LIKE :Z ESCAPE '/' OR "A"."ARGUMENT" IS NULL AND
DECODE("A"."TYPE#",0,NULL,1,DECODE("A"."CHARSETFORM",2,'NVARCHAR2','VARCHAR2'),2,
DECODE("A"."SCALE",(-127),'FLOAT','NUMBER'),3,'NATIVE
INTEGER',8,'LONG',9,DECODE("A"."CHARSETFORM",2,'NCHAR
VARYING','VARCHAR'),11,'ROWID',12,'DATE',23,'RAW',24,'LONG
RAW',29,'BINARY_INTEGER',69,'ROWID',96,DECODE("A"."CHARSETFORM",2,'NCHAR','CHAR')
,102,'REF CURSOR',104,'UROWID',105,'MLSLABEL',106,'MLSLABEL',110,'REF',111,'REF',
112,DECODE("A"."CHARSETFORM",2,'NCLOB','CLOB'),113,'BLOB',114,'BFILE',115,'CFILE'
,121,'OBJECT',122,'TABLE',123,'VARRAY',178,'TIME',179,'TIME WITH TIME
ZONE',180,'TIMESTAMP',181,'TIMESTAMP WITH TIME ZONE',231,'TIMESTAMP WITH LOCAL
TIME ZONE',182,'INTERVAL YEAR TO MONTH',183,'INTERVAL DAY TO SECOND',250,'PL/SQL
RECORD',251,'PL/SQL TABLE',252,'PL/SQL BOOLEAN','UNDEFINED') IS NOT NULL) AND
DECODE("A"."PROCEDURE$",NULL,NULL,"SYS_ALIAS_1"."NAME") LIKE :Z ESCAPE '/' AND
NVL("A"."PROCEDURE$","SYS_ALIAS_1"."NAME") LIKE :Z ESCAPE '/')
7 - access("U"."NAME" LIKE :Z ESCAPE '/')
filter("U"."NAME" LIKE :Z ESCAPE '/')
9 - access("SYS_ALIAS_1"."OWNER#"="U"."USER#")
10 - access("SYS_ALIAS_1"."OBJ#"="A"."OBJ#")
11 - filter("X$KZSPR"."INST_ID"=:B1 AND ((-"X$KZSPR"."KZSPRPRV")=(-144) OR
(-"X$KZSPR"."KZSPRPRV")=(-141)))
12 - filter("OBJAUTH$"."PRIVILEGE#"=12)
15 - access("OBJAUTH$"."GRANTEE#"="X$KZSRO"."KZSROROL" AND
"OBJAUTH$"."OBJ#"=:B1)
Note: rule based optimization
PLan of the Query in Oracle 10.2.0.5.3(AIX - New DB )
?PLAN_TABLE_OUTPUT
Plan hash value: 2991281545
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 109 | 451 (3)| 00:00:06 |
| 1 | SORT ORDER BY | | 1 | 109 | 451 (3)| 00:00:06 |
|* 2 | FILTER | | | | | |
|* 3 | HASH JOIN | | 3 | 327 | 450 (3)| 00:00:06 |
|* 4 | HASH JOIN | | 12 | 1128 | 448 (3)| 00:00:06 |
|* 5 | TABLE ACCESS FULL | ARGUMENT$ | 4821 | 291K| 259 (3)| 00:00:04 |
| 6 | TABLE ACCESS FULL | OBJ$ | 56329 | 1760K| 187 (2)| 00:00:03 |
| 7 | TABLE ACCESS BY INDEX ROWID| USER$ | 6 | 90 | 2 (0)| 00:00:01 |
|* 8 | INDEX RANGE SCAN | I_USER1 | 2 | | 1 (0)| 00:00:01 |
|* 9 | FIXED TABLE FULL | X$KZSPR | 1 | 26 | 0 (0)| 00:00:01 |
| 10 | NESTED LOOPS | | 2 | 50 | 2 (0)| 00:00:01 |
|* 11 | INDEX RANGE SCAN | I_OBJAUTH1 | 1 | 12 | 2 (0)| 00:00:01 |
|* 12 | FIXED TABLE FULL | X$KZSRO | 2 | 26 | 0 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - filter("OWNER#"=USERENV('SCHEMAID') OR EXISTS (SELECT 0 FROM SYS."X$KZSPR"
"X$KZSPR" WHERE ((-"KZSPRPRV")=(-144) OR (-"KZSPRPRV")=(-141)) AND
"INST_ID"=USERENV('INSTANCE')) OR EXISTS (SELECT 0 FROM "SYS"."OBJAUTH$"
"OBJAUTH$",SYS."X$KZSRO" "X$KZSRO" WHERE "GRANTEE#"="KZSROROL" AND "OBJ#"=:B1 AND
"PRIVILEGE#"=12))
3 - access("O"."OWNER#"="U"."USER#")
4 - access("O"."OBJ#"="A"."OBJ#")
filter(NVL("A"."PROCEDURE$","O"."NAME") LIKE :2 ESCAPE '/' AND
DECODE("A"."PROCEDURE$",NULL,NULL,"O"."NAME") LIKE :3 ESCAPE '/')
5 - filter("A"."ARGUMENT" LIKE :5 ESCAPE '/' OR "A"."ARGUMENT" IS NULL AND
DECODE("A"."TYPE#",0,NULL,1,DECODE("A"."CHARSETFORM",2,'NVARCHAR2','VARCHAR2'),2,DECO
DE("A"."SCALE",(-127),'FLOAT','NUMBER'),3,'NATIVE
INTEGER',8,'LONG',9,DECODE("A"."CHARSETFORM",2,'NCHAR
VARYING','VARCHAR'),11,'ROWID',12,'DATE',23,'RAW',24,'LONG
RAW',29,'BINARY_INTEGER',69,'ROWID',96,DECODE("A"."CHARSETFORM",2,'NCHAR','CHAR'),100
,'BINARY_FLOAT',101,'BINARY_DOUBLE',102,'REF
CURSOR',104,'UROWID',105,'MLSLABEL',106,'MLSLABEL',110,'REF',111,'REF',112,DECODE("A"
."CHARSETFORM",2,'NCLOB','CLOB'),113,'BLOB',114,'BFILE',115,'CFILE',121,'OBJECT',122,
'TABLE',123,'VARRAY',178,'TIME',179,'TIME WITH TIME
ZONE',180,'TIMESTAMP',181,'TIMESTAMP WITH TIME ZONE',231,'TIMESTAMP WITH LOCAL TIME
ZONE',182,'INTERVAL YEAR TO MONTH',183,'INTERVAL DAY TO SECOND',250,'PL/SQL
RECORD',251,'PL/SQL TABLE',252,'PL/SQL BOOLEAN','UNDEFINED') IS NOT NULL)
8 - access("U"."NAME" LIKE :1 ESCAPE '/')
filter("U"."NAME" LIKE :1 ESCAPE '/')
9 - filter(((-"KZSPRPRV")=(-144) OR (-"KZSPRPRV")=(-141)) AND
"INST_ID"=USERENV('INSTANCE'))
11 - access("OBJ#"=:B1 AND "PRIVILEGE#"=12)
filter("PRIVILEGE#"=12)
12 - filter("GRANTEE#"="KZSROROL")
52 rows selected.
Regards,
Savad

How is GC cpu utilization % calculated?

I am trying to find a way to capture the problem where a user process eats up a ton of cpu for over 30 minutes. I thought that I could possibly use the cpu utilization metric.
In testing it, I reset the values to warning and critical thresholds to 0 and 5% respectively to see what would happen. I was emailed with the expected critical alert. In looking at the top sessions on the server, I noticed that 1 session was eating up 100% of one cpu (which I want to know about) but the alert email said that 45% was utilized which I noticed was about what the user load is on the server.
Initially, I had the warning and critical threshold set to 85 and 95% respectively but did not get any warning about a user process that was taking up 100% cpu for > 5 minutes (in which the 5 minute collect times were set to once).
My questions are
1) How do I capture a single process eating up > 90% cpu in a multi-cpu environment
2) Is the cpu utilization % capturing the Average Load of the cpus on the server and alerting when it's above the critical threshold?
3) How is the cpu utilization % calculated?
Help would be appreciated.

The cpu load is determined by running the Grid program nmupm found in $AGENT_HOME/bin
The output is like:
dbc12ykf: PDBGRP> nmupm osCpuUsage
em_result=1|206331806.000000|201540370.000000|102524043.000000|958620752.000000
em_result=2|212731589.000000|201203614.000000|67775500.000000|948506267.000000
em_result=3|212402913.000000|230642957.000000|76833167.000000|917779040.000000
em_result=4|242543014.000000|367865067.000000|81554006.000000|791426607.000000
You will get a line for each cpu.
YOu'll need a bit of reverse engineering to figure out the columns - I think they are user, system, idle , 5min avg - Multiplied by 10000 ?
Now to capture a big one - I think you will need a user defined metric. Just write a simple shell script to run the above command, and evaluate the numbers coming thru.

Total cpu utilization percentage diagnostic removed from Windows 2008 MP?

SCOM 2012 SP1 environment running the Windows Server 2008 Operating System Management Pack, version 6.0.7026.0
http://www.microsoft.com/en-us/download/details.aspx?id=9296
We had a server that had high CPU utilization. We were able to figure out what process was causing the high CPU using some remote commands, but I am used to seeing this in the health explorer state change events view.
I looked into health explorer but there is no data.
http://i.imgur.com/eArmCM2.jpg
I then notice that in this MP, there are 2 CPU monitors
http://i.imgur.com/I9eBN4G.jpg
The first monitor shown is disabled by default, but it is this monitor that contains the diagnostic to list the top CPU consuming processes
http://i.imgur.com/tLgq9at.jpg
The CPU monitor that is enabled by default has no diagnostic tasks associated to it
http://i.imgur.com/AKAKOP9.jpg
While I have the ability to create my own diagnostic task, I would rather not, as it requires me to enter my own command or script.
I liked the fact that the CPU monitor would list the top consuming processes, as this was useful troubleshooting information.
Does anyone know why this diagnostic is not included in the new version of this monitor? I cannot find any information in the release notes.
Is there any reason I should think twice about disabling the default monitor, and setting an override to enable to “legacy” monitor that has the diagnostic task built in?

I can confirm that the other OS versions have the single CPU monitor with diagnostics set to run by default. For Windows Server 2008 R2 I have created a sample management pack which enables this functionality which is available at:
http://www.systemcentercentral.com/download/re-enable-processor-diagnostic-windows-2008-management-pack/.
Cameron

How to check CPU % Utilization with SNMP

We are using Ipswitch's What's Up Professional 2006 to monitor devices on our network. Their default snmp graphing utilities use the HOST RESOURCES MIB to collect and graph system performance statistics over time. I have them running perfectly on all my Windows servers, but for my Solaris systems I am only able to retrieve Memory, Disk, and Network Interface statistics. The CPU monitor is unable to retrieve data from our Solaris systems. A typical system is running Solaris 10 with the default agent, NET-SNMP version 5.0.x. Does anyone know if the default agent supports checking CPU usage in the HOST RESOURCES MIB? If not can anyone point me to a different MIB & instance that will return % CPU utilization of a Solaris 10 server? Any input would be greatly appreciated. I've searched everywhere for the solution but I am unable to find any straight-forward answers, hopefully someone can help.

Hi
You can do it via T Code ST02.I am sending you a link hope it help you
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/02/96263e538111d1891b0000e8322f96/content.htm">Check this</a>
Rewards point if helpful
Thanks
Pankaj Kumar

URGENT: 99% CPU Utilization - different oracle process

Hi,
I have application using the database. It is 24*7 production env.
The CPU Utilization goes very high and application is working very slow.
I have enterprise manager on windows 2003 server and agents on linux to monitor it.
Oracle 10g is the database version.
Everytime i try to find out the process it goes down but generally the application is running very slow
Following is the result of sar on linux box which is taking up high CPU.
Linux 2.6.9-22.ELsmp (sydora2.sabrepacific.com.au) 03/12/07
10:17:43 CPU %user %nice %system %iowait %idle
10:17:48 all 93.69 0.00 3.34 2.98 0.00
10:17:53 all 69.85 0.00 3.82 26.32 0.00
10:17:58 all 88.61 0.00 2.80 8.59 0.00
10:18:03 all 96.90 0.00 2.57 0.53 0.00
10:18:08 all 95.13 0.00 3.29 1.58 0.00
Average: all 87.30 0.00 3.22 9.48 0.00
Let me know how to drill and fix this problem.
Please help !!
Thanks in advance.

High CPU is not a problem by itself, but you need to identify if it is consistently if so why.
SELECT a.*,b.*
from
v$session b,
v$process a
where
b.paddr = a.addr
and a.spid = <number> ;
spid is your server PID.
Identify your pid with top command, feed the pid to identify which session is using considerable CPU. Identify the sql that it is running.
SELECT * FROM V$sql where sql_id= <prev_sql_id from v$session>
Message was edited by:
gopalora

High time consumption and CPU utilization on EPM 11.1.2.1

We are using a distributed environment for EPM system 11.1.2.0, in which, on system A, Foundation services and Planning have been installed and on system B, Essbase, Admin Services and Provider Services have been installed.
The configuration for the two systems is as mentioned below :
System A:
intel Xenon CPU X7560 2.27 GHz (dual core)
12 GB RAM
System B:
intel Xenon CPU X7560 2.27 GHz (dual core)
8 GB RAM
A business rule takes 15 minutes on being executed on version 9.3.1; whereas the time consumed on system 11.1.2.1 varies from 3 hours (mostly) to 10 minutes.
This business rule aggregates 5 dimensions (1 dense and 4 sparse). It does not create any new blocks and intelligent calc is also set to off.
Although the cache and memory values on the newer system are higher than the previous version, we fail to reduce the time consumption and CPU utilization. Please help us resolve this issue.

Your issues is beyond the scope of a forum. I suggest you find an infrastructure person who has Essbase experience. Your machines also have less resources than the standard deployment guide recommends.
This would appear to either be lack of physical memory or an issue with the IO speed of the disk subsystem which you are storing your Essbase data on.
Regards,
John A. Booth
http://www.metavero.com

Determine the CPU utilization

Guys,
I've been asked to determine the CPU utilization for the execution of my procedure performing a large ETL operation. (in an unix box)
Could someone help me out?..Is there an oracle query with which I can find the detail?
Thanks guys!!!
Regards,
Bhagat

Compare CPU statistics before and after proc execution. They are measured in 10s of milliseconds.
select sn.name, ms.value
from v$sesstat ms, v$statname sn
where ms.statistic# = sn.statistic#
and upper(sn.name) like '%CPU%'
and ms.sid = [proc session SID]Regards,
Dima
Edited by: DimaCit on Sep 5, 2008 11:14 AM

Finder CPU Utilization

Similar Messages

Maybe you are looking for