Finder, Dashboard, HD Issue

MacBook Early 2008, Mac OS X 10.5.8
Deleted some items from trash recently to clean up the computer and now Dashboard widgits don't work, Finder is not responding (can not relaunch), volume will not adjust, and can not open HD.
Have tried disabling and reenabling Dashboard, resetting PRAM and all other suggestions in forum.
Any ideas?

Welcome to the Forums!
My guess would be that this has something to do with what you deleted.
If you let us know just what you emptied from the trash, we can help you get things running again.
Depending on what you deleted, the easiest thing may be to reinstall the operating system. But, let us know what you did delete, and there may be an easier way to fix things.
-Nate

Similar Messages

Finder and iTunes issues.

This past week or so, iTunes has been force booting itself at seemingly random times.
This has been causing me issues when I am working on video or audio projects, as when iTunes boots it eats almost all of my RAM and causes most of my programs to lock up, even if only temporarily.
When this happens Finder eventually loses connection to my LAN and ejects my external hard drives. When I try to reconnect to them, the operation either times out, it says the drives can't be found or that my LAN isn't running. I should note I'm using an AirPort Extreme base station to create my LAN and share my drives.
To try to solve this, I have tried force quitting Finder, but then it won't start again, instead citing some error code.
This again becomes a problem when trying to shut down as Finder is required to complete the process. The only way I can get around this is to force reboot my computer by holding the power button down until my MacBook shuts itself off.
Immediately upon reboot, all programs that were affected by iTunes and RAM loss take an EXTREMELY long time to finish booting.
All my software and drivers are up to date.
I'm running OSX 10.6.8 on a late 2010 MacBook 2.4GHz Intel Duo core.
AirPort is Extreme 2nd version running version 7.6.1
==Update==
It seems two reboots are required for my drives to show up over my LAN.
After the forced shutdown and reboot it doesnt work.

I've gotten everything running again, but iTunes still persists in force booting itself when I don't ask it to.
I've checked my sync and update settings on my iTouch, but it still does it.
I've gotten past the Finder force reboot issues by just telling my computer to reboot when my network is experiencing difficulties.
This has also solved the issue of said drives and network not showing up again upon reboot.
Programs still take ages to boot if they were not quit properly (ie. iTunes caused massive lock up and programs had to be force quit), and this is still affecting my work flow negatively.

Where can I find the sample Issue Tracker application?

Where can I find the sample Issue tracker application?
Regards.

Hi Maxim
Your version is for HTMLDB 1.5.
I found a (little bit) newer version for htmldb 1.6: http://htmldb.oracle.com/pls/otn/f?p=18326:7:14841698881447966533::::P7_ID:1184
But I don't testet it.
Greetings
Sven

Find Project From Issue?

Hi , I want to find project from Issue ? I have Issue guid number and ref guid number but ı am not finding project ?
thanks for helps .

This is PC
Got the (ANSI-Latin 1) down. We have a project that in D10 we
had to localize in Russian. Problem is that D10 did not support
that code to display Russian correctly when working within D10.
This support is in D11.
So if I understand you correctly D10 is in ANSI-Latin 1. This
is confusing cause when we upgrade the files it defaults to some
Turkish code page. Does D11 auto read this formating when upgrading
the files and if so should we be allowing the default or should we
be telling D11 to use ANSI-Latin 1?

After publish Android Application in Google Play Can't find any publish issue in app.

After publish Android Application in Google Play Can't find any publish issue in app. The Product ID is match, The Email Address in Folio Builder is match but is there necessary that DPS account have to match with Google Play Developer Account? Please Help

Are the folios published as Public? Are the folios free or retail? If retail, did you create an in-app billing Product ID in Google Play that is an exact match for the published folio? Is the "Title ID" you specified the same account you used to create the folios? Did you turn on Strict Renditions when you built the app?

Extremely difficult to toggle switches on and off in settings in iOS6, on multiple devices, iP5, 4S, 4 and new iPad. Are others finding the same issue?

Extremely difficult now to toggle switches on and off in settings in iOS6, on multiple devices, iP5, 4S, 4 and new iPad. Are others finding the same issue?

I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

Icons - changing Finder, Dashboard, System Prefs, etc. How?

Hi, So I know how to change icons:
Select the icon I want to use, copy it, go to Applications, right click the program icon I want to change, Get Info, Edit, Paste. Voila!
Only, it doesn't work with Finder, Dashboard, or the awful new System Prefs icons.
OK, I think, maybe that's because these Apps are built directly into the OS. Well, if that's why I can't change them then why oh why are there so many alternative sets of lovely Finder, Dashboard, System Prefs icons out there? I mean, what are they for?
So, help please.
Leopard 10.5.0, MacBook Pro.

to change for an application
go into the application by right clicking and show package contents.
open the resources folder. the icon is typically a .icns file. to change it you must replace this file with the new file. make a backup in case you want to change back.
finder/dock is more involved. you can read more about it here: http://discussions.apple.com/message.jspa?messageID=5771616#5771616
but while modifying these icons isn't terribly tricky, one should always be very careful about messing around with the system files. hence the benefit of using something like candy bar.

OBIEE 11g: Dashboard Javascript Issue

Hi Gurus,
We have upgraded obiee from 10g to 11g and finding issues with javascript in a dashboard.
Functionality: There are some custom labels showing prompt values in it with large font. When user change prompt value and Apply, it should change the value of those text as well.
In 10g its running fine, but in 11g its not happening after we change the value of prompts. I found the following Javascript is responsible for this functionality. Even I saw one thread to suggest the exactly same code, but in 10g.
<script type="text/javascript">
(function(){
var tblTag = document.getElementsByTagName('table');
var tdElem= document.getElementsByTagName('td');
for(m=0;m<tdElem.length;m++){
if(tdElem[m].className=='GFPSubmit'){tdElem[m].childNodes[0].tBodies[0].rows[0].cells[0].childNodes[0].childNodes[0].innerHTML='Run Report';
}//close if statement
}//close for loop
}// close function clickVal()
</script>
Thread:
Change Go Button Text on Prompt Only
I need to understand what its actually doing? and Does it really work in 11g? Whats the alternative code?
Thanks in advance.

In 10g these are the html objects, after upgrade you need to know the html objects for that report based on that you need to modify javascript code.
From given code, activity is doing on these objects; You need to find out the equivalent object name for 'GFPSubmit' in 11g.
GFPSubmit
table
td
If make sense mark

Cannot find dashboard and reports after upgrading rdp from 10g to 11g OBIEE

Hi all
I am trying to upgrade from OBIEE 10g to 11g. These two products are installed on different servers. I have followed the guide: http://www.oracle.com/technetwork/issue-archive/2011/11-jul/o41bi-402913.html and everything seems to work fine.
So i have taken a copy of rdp from the server where was installed OBIEE 10g and took it in the server where OBIEE 11g is installed.
Ran the upgrade tool and upgrade finished successfully. Restarted the BI Servers in core application on Enterprise Manager.
Now when i access the upgraded rpd, the layers and the fields are fine but I cannot find all the reports and dashboards that i had created.
Am I missing any upgrade steps?
Please suggest
Thank you and best regards

Hi Deepak,
Thanks for your response.
Oracle also came back to me and looks like my method is not valid:
Hi Jim,
Thanks a lot for the information. First of all I would like to inform you that upgrade CANNOT be performed across two machine. So, if 10g installation is on Host A, then upgrade to 11g will be on Host A.
So, in your scenario this is what you can do:
1. On Host A running Forms/Discoverer 10g on Windows 2003, install Forms/Discoverer/Reports 11g (11.1.1.6.0)
2. Run the upgrade Assistant to perform the upgrade from 10g to 11g.
3. Now upgrade OS of Host A to Windows 2008
In short, I would like to inform you that upgrades across machines does not work. Source instance which is 10g and destination instance which is 11g must exist on same box.
Here is the documentation which you can follow:
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10130/toc.htm
(Oracle® Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer)
11g Release 1 (11.1.1)
Let me know if you have any further questions.
Thanks,
Rishi

Bizarre & Random Dashboards Display Issues/Errors

Hello,
I am on BI 4.1 SP04 and these dashboards were developed using an equivalent level on the client tool. (4.1 SP04)
Sometimes we get very strange and often random display issues with our dashboards. I have attached screen shots for examples. Sometime we are missing data points from rendering on the charts, other times a line chart will extend into a bar chart. Has anyone experienced this or have any idea what could cause this? It is very frustrating...
Thanks for looking,
Gary
Missing data points on yellow line, yet line rendering with proper data (other wise would have 0's in places, etc)
Green line missing dot on last end point
In this example there are no dots on the yellow line or green line
In this example the blue line has turned into massive columns extending across the charts

This patch should resolve the issue in the last screenshot. I still face the other issues after upgrading to SP3 Patch 4. The dots in line chart take some time to appear. Also, if we use dynamic visibility, the components taking considerable time to appear sometimes. I hope this will also be fixed in later patches. Please share your experience too after applying the patch.

Finder & DVD drive issue

Hi All,
I have a small issue.
1. My dvd drive makes a funny clicking noise when i first insert a dvd. Is this normal?
2. When using finder and scrolling down to find a document sometimes the window blinks as i scroll down.

1. Yes, the noise is normal.
2. No, not normal. There are a couple of threads on this flickering while scrolling issue, try a forum search.

Dashboard Performance Issue

HI Ingo,
Thanks a lot for the wonderful postings in SDN and for your blogs on SAP BI/BO Solution architecture.
I am looking for few clarifications on SAP BO Xcelsius Dashboards.
Though I know limitations on component number and data volumes which could badly affect performance of the dashboard, We do have a requirement to handle huge data volumes and multiple components. For drilling down and complete analysis for the users. Our source data lies in SAP BI system and we are using BICS connectivity/ Webi with Live office for updating data in Xcelsius.
Our requirement is too complex where we should be in a position to meet user expectations for complete multidimensional analysis by different criterion.
We have scenarios like, Delivery performance where we need to get Case fill rate, Line fill rate, OTIF (On Time In Full), etc .along with that alerts and based on that we should be providing short term, long term and medium term analysis. (also we have scenarios from Sales, Inventory , Supply chain which are interlinked to each other).
Here are my questions,
1.     Is there any way to provide complete functionality using large data sets to the users with the current architecture without any performance issues?
2.     Are there any third party tools which can be used with Xcelsius for the performance improvement and handling huge volumes?
3.     Do you suggest any alternate solution for complete functionality?
Awaiting your response.
Thanks & Regards,
Paramesh Kumar Bada

hi,
Generally, it would be better to display summarized information in Xcelsius.
So at database/Source level, maintain aggregated information which will serve as input to Xcelsius.
You can use Crystal Reports and Xcelsius together.
Because Crystal reports has the capability of embedding Xcelsius components within the report.
So Charts can be built using Xcelsius and embed in Crystal. whereas Table related content can be developed within Crystal report directly. Also, try to provide URLs(Open Document concept) from Xcelsius to Crystal reports to drill-down from Summary data to detailed data.
Regards,
Vamsee

Table to find posted goods issue of vl02n

Hi all,
After perform the post good issue on vl02n, SAP suppose to update the posted goods issue into a table. So may i know which table to find the posted goods issue record ?
Regards,
Marcus

Hi,
VBUK is the header tables, you need to refer to VBUP for the item details.
Table VBFA contains the document flow, where fields VBELV contains the previous document no. & VBELN contains the subsequent document.
So for your need, you can refer to VBUP, VBELN would be the outbound document number, also the movement type would be 601.
Revert if you face any issues.
Regards,
Vivek

Find iPhone App Issue

Hello,
I am using the Find iPhone app for a few weeks now and works perfectly on my iPhone 4S, and iPod Touch but can;t located my iPad 2 ever. Its a WI-FI only iPad 2, It always says "No location available". I don't get it because all the location services are on Even the Find My IPAD location Service is ON of course. Everything works are are as GPS on Compass app and in my MAPS app finds me in seconds. But won't work on Find iPhone app. I have the same application my my wifes IPAD 2, and it finds her iPhone 4S, iPod, and even her iPad 2 without a problem. Only my iPad 2 has this issus. Any ideas what in the world could be different from her iPad 2 and mine? Save OS same erverything else from what I can tell.
Suggestions? Ideas??

Yes, all devices are under the same Apple account. I have an iPhone 4S, iPod Touch, and this iPad2. Finds everything on the device listing and its location except my iPad 2 which says NO LOCATION AVAILABLE. I have heard people tell me it might take a while to work, or sometimes it server issues. This has been going on since I downloaded the APP weeks ago, I even reset the whole iPad 2 back to its original settings when I first purchased it and restored all my apps from iCloud thinking that would work. Nope, still can't located my iPad 2.
My wife has her own Apple account with all her devices iPhone 4s, iPod and her iPad 2 and everything is found without a problem when she uses her Find iPhone app.
Setting all are the same,,, everything turned on as far as Location Services.

ISE DashBoard Access issue

Hi,
I am running distributed deployment with mutiple PSNs,MONs & Admin Nodes are deployed.I was verifying crtical vlan access and radius server dead critera and a test case scenrios to reboot/power off the devices for sometime and trun them on back and verify the service. But after devices came up i lost dashboard access There is no more GUI access though I am still able to access all the devices through CLI.
Could you please help me to identify the issue.
follwoing output for the referance.
isea001/admin# show application status ise
ISE Database listener is running, PID: 4947
ISE Database is running, number of processes: 29
ISE Application Server process is not running.
ISE Profiler DB is running, PID: 6173
ISE M&T Session Database is not running.
ISE M&T Log Collector is not running.
ISE M&T Log Processor is not running.
isem001/admin# show application status ise
ISE Database listener is running, PID: 4952
ISE Database is running, number of processes: 23
ISE Application Server process is not running.
ISE Profiler DB is running, PID: 6131
ISE M&T Session Database is running, PID: 4646
ISE M&T Log Collector is running, PID: 6625
ISE M&T Log Processor is not running.
isep001/admin# show application status ise
ISE Database listener is running, PID: 4955
ISE Database is running, number of processes: 23
ISE Application Server process is not running.
ISE Profiler DB is running, PID: 6215
ISE M&T Session Database is not running.
ISE M&T Log Collector is not running.
ISE M&T Log Processor is not running.
isep002/admin# show application status ise
ISE Database listener is running, PID: 4953
ISE Database is running, number of processes: 23
ISE Application Server process is not running.
ISE Profiler DB is running, PID: 6171
ISE M&T Session Database is not running.
ISE M&T Log Collector is not running.
ISE M&T Log Processor is not running.

Hi Neno, the BuG ID # CSCuo68012

Finder, Dashboard, HD Issue

Similar Messages

Maybe you are looking for