Bizarre & Random Dashboards Display Issues/Errors

Hello,
I am on BI 4.1 SP04 and these dashboards were developed using an equivalent level on the client tool. (4.1 SP04)
Sometimes we get very strange and often random display issues with our dashboards. I have attached screen shots for examples. Sometime we are missing data points from rendering on the charts, other times a line chart will extend into a bar chart. Has anyone experienced this or have any idea what could cause this? It is very frustrating...
Thanks for looking,
Gary
Missing data points on yellow line, yet line rendering with proper data (other wise would have 0's in places, etc)
Green line missing dot on last end point
In this example there are no dots on the yellow line or green line
In this example the blue line has turned into massive columns extending across the charts

This patch should resolve the issue in the last screenshot. I still face the other issues after upgrading to SP3 Patch 4. The dots in line chart take some time to appear. Also, if we use dynamic visibility, the components taking considerable time to appear sometimes. I hope this will also be fixed in later patches. Please share your experience too after applying the patch.

Similar Messages

Display Issues + error connecting? Yoga 13

Hey, I just sent my laptop in to get repaired after it fell on the ground at a laundromat and the screen shattered, $300 later and two months after, I'm finally using it again, but I've been only using it for about two weeks, and a few days ago I noticed that after I put my laptop on sleep, or walked away from it for a little bit, the screen went to black, and sometimes it would light up like normal, but it's been staying black and not booting out of sleep mode for the display. I've also noticed that my wireless connection will just drop for no reason, and when I try to disconnect or turn airplane mode on and off to reset it, the computer doesn't respond, and it will say "connecting" when airplane mode is on, and not respond in the network sidebar.
Also, side note, I noticed when loading up my PC the lenovo loading screen is all pixelated vertical lines before it loads (something I see on this new screen, but I didn't see before the repair)..
Any suggestions? Could this be a firmware issue of some kind? Or something?

Hi have few issues when I have upgraded with Windows 10. So I have decided to do a full recovery: SETTINGS=> Update & security (windows update, recovery, backup)=> Recovery / Get started (Reset this PC)=> Remove everything (remove all your personnel files, apps and settings)=> Only the drive where windows is installedThis did a full fresh installation of windows 10 on my C drive, and it kept all my personnel files (docs, pictures, video, etc) on my D drive.now everything is working very good and fast. this may be the final solution for you, but at least this will setup a clean windows 10 on your yoga without any interference with some lenovo previous apps setting. Anyway I have attached my current setting for my display, hopping this will help:

Dashboard Display Error

Hi Gurus,
I getting error while accessing sub dashboard.I have Dashboard Name as Sales and i have sub dashboard underneath Sales says S1,S2,S3 and each sub dashboards has dashboard pages respectively.So when i select S1 sub dashboard it throws me error as
Dashboard Display Error
Assertion failure: pRoot at line 107 of /vol1/users/anabuild/views/nightly/Tue/aruba/RH_Linux/vobs/071217.1900/analytics_web/main/project/webxml/xmldocument.cpp
Error Details
Error Codes: OQ78YWIW
and when i select S2,S3 it shows me dashboard pages fine doesn't give me any error.I restarted all my services but no luck.This error throws only if i enter with user id and password but it doesn't throw error if enter as Administrator.
Can you guys let me know what is error meant by and if any one have faced such scenario.
I really appreciate your help.

Does the user have the same read/write rights on the server as the administrator?
Is there a query limitation based on the user credentials?
regards
John
http://obiee101.blogspot.com/

HTTP Error 403 - Customized Error Page Display Issue

Hi,
I have included 403 in <error-code> in my web.xml and defined proper security constraints. But when I try to access my JSPs directly on Mozilla I see my error page but I try in Internet, I can't see the same page.
Can someone help me?

BalusC wrote:
Then don't send the HTTP error status code in the headers. It would trigger IE to display friendly error pages.
Best solution would be to let the error page invoke a redirect to self (or another error page) when the HTTP status code is 403, so that it becomes 200 (or anything in range of 200-399) so that IE won't be triggered to display friendly error pages. Best solution would be to let the error page invoke a redirect to self (or another error page) when the HTTP status code is 403You want to say that I should define a error page in my JSP where, when its called, I need to handle the 403 error. Please correct me if I'm wrong. I have defined *403 error code in my web.xml*.
Again if possible can you please put down a sample how to do it?

MacBook Pro Startup and Display Issues

I've been having some random problems with my MacBook Pro (2.16 GHz, 2 GB RAM, 100 GB 7200 rpm hard drive, ATI Radeon X1600 graphics). Specifically:
1. Lines across the screen and purple boxes sometimes appear.
2. The graphic effects (e.g. zooming a window) sometimes get "frozen" on the screen. In other words a remnant from the animation will stay until the window is refreshed.
3. The Mac sometimes freezes during the startup process. Sometimes the login screen will be unresponsive and other times the Mac will almost bootup but fail when loading startup items.
4. Less frequently the Mac will freeze randomly. I previously had iStat Menus installed and each time the MacBook Pro froze up it indicated both read and write disk activities.
Yesterday I decided to wipe the machine clean and start from scratch in case there were a software issue or corruption on the hard drive that was causing my woes. I completely erased my hard drive and even zeroed the entire disk to make sure everything was completely wiped out. I also disconnected all peripherals to simplify things as much as possible.
The first time I tried the reinstall everything completed successfully but the "Welcome" movie froze part way through. I then had problems running the install again. I was able to boot off the Leopard DVD, but the machine froze a couple of clicks into the install procedure. After numerous tries I was able to erase the hard drive once again and install Leopard. This completed successfully and I installed all updates.
The problems started to show up again almost immediately, however. I installed iLife and iWork and all the updates and had the computer freeze up on me again during a reboot. I also noticed that the display issues started to show up again even before installing any third-party software.
I've tried running disk tests with Drive Genius 2.1, but no errors have been reported. I've also used the freeware Rember program to run memory tests but have yet to see any errors. Sometimes my Mac powers up without any problems and once it's powered up it often stays running for days. The display issues appear quite frequently. I've using iStat Menus to keep an eye on the temperature sensors and everything appears to be normal - so it doesn't appear to be temperature related.
Fortunately the computer's still covered under the extended AppleCare warranty, but I would like to have some idea what's going on before I take it in just in case they're not able to reproduce the issues.
Any suggestions and insights would be GREATLY appreciated. Thanks in advance for reading my rather long-winded message.
Cheers,
Tim

I took my MacBook Pro in for repair and it turned out to be an issue with the logic board. I had the logic board replaced (fortunately it was covered under my extended AppleCare warranty) and these problems are a thing of the past.

Display an error and cancel the job in F110

Hi all.
I use a BTE's to check some data in F110 transaction. I want to display some error and abort the proposal creation JOB.
I can to abort the Proposal creation JOB with RAISE_EXCEPTION command, but I cannot display the error.
how I can to display an error when I find an issue in Porposal creation JOB ( using BTE's) ?????
thanks
Ismael

You cannot implement exit randomly for F110 cause F110 is stand alone for support Automatic payment transaction for all country.for most the country it have a seperate exit so be carefull before implement exit and make sure for country.
if you want to check before scheduling a proposal run than you may se at BADi:
FI_F110_SCHEDULE_JOB
Method:CHECK_PARAMETER
use parameter for country key:I_LAND1 in above method
and use parameter control records for schduling:I_F110V in above method

Nvidia Display Driver Error

New T61-CTO system, Vista 32 with Nvidia Quadro NVS140M that is not even a week old.
The system is very unstable, crashing almost daily with a display driver error. About half the time it is able to recover and I get the following message, "Display driver nvlddmkm stopped responding but has recovered.....". The other half the computer crashes to blue screen or just freezes with a corrupted display and I am forced to hard-power-off to restart. About 75% of the time the error occurs at startup, but sometimes just randomly while working.
There is lots of info about this driver problem online but mostly for different display adaptors on desktop systems. For the record I have the following display driver installed: 7.15.11.5685 and it is dated 12/10/07. Nvidia does not provide support for this display adaptor and refers you to the system manufacturer. Strangely, the driver on the Lenovo site is 7.15.11.0145 and dated 7/12/07, not sure why my system shipped with a driver that is not listed on the support site.
Any information on resloving this issue would be greatly appreciated.
Thanks

Hi WillThePill, and welcome to the Lenovo User Community!
I come up with a newer driver version 7.15.11.7693 2009/01/13 on the Lenovo support site:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67890
Try that and tell us if it helps!
I don't work for Lenovo. I'm a crazy volunteer!

Random shut down issue

So I have a Macbook 13" 1.83 Ghz Core Duo, running 10.6.2 with 2gb of (user installed) RAM. Minus a defective battery issue last year (the battery swelled to the point where my trackpad wouldn't work) which apple replaced for free out of warrantee, I have had no issues.
Out of the blue, I've been experiencing random shut down issues of sorts. If I have the computer plugged in it works fine. Sometimes though, the computer will randomly shut down after being unplugged. I tried reseting the SMU but it didn't seem to do anything.
Another odd thing - I calibrated the battery with the computer on an incline on my desk to keep it cool in case it was an issue of over heating. The computer charged fully, and then drained it's charge to 0% and went to sleep as it should.
But once I charged it up about halfway again, unplugged it, and put it on my lap, it shut off within 2 minutes. I'm well out of my warrantee so any user suggested diagnostic tips would be appreciated! I've included the battery info for good measure (btw the battery is not even a year old).
Battery/power info:
Model Information:
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 3610
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4310
Health Information:
Cycle count: 247
Condition: Normal
Battery Installed: Yes
Amperage (mA): 783
Voltage (mV): 12406
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 4
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 4
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: No
Battery Power:
System Sleep Timer (Minutes): 6
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: No
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x002afaac
Charging: Yes

Hmm, your battery is fairly healthy.
Is your fan running?
You can get the iStat Pro widget here:
http://www.apple.com/downloads/dashboard/status/istatpro.html
The iStat widget measures various parts of your computer, including the fan speed.
~Lyssa

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

My server is displaying an error - what setting needs to be changed?

I have the problem posted below, that apple.com acknowledges, but there is no specific information on how to fix it. My server company does not know which setting needs to be changed. Can anyone help? This happened suddenly, and I did not even change anything about my webpage.
Some web servers may display an error on a website created in iWeb:
"Parse error: parse error, unexpected T_STRING in [filename].html on line 1."
The settings on some web servers may cause difficulty parsing the line in a published iWeb document that establishes XML compliance. If you get this error message on your published website, please contact the administrator of your web server.
This issue does not occur on sites published to .Mac.

See this thread:
http://discussions.apple.com/thread.jspa?threadID=1374430&tstart=0

Calendar Parameter displays an error when scheduling a report.

Hello,
We have Business Objects XI R1 (11.0.0.1282) and Crystal Reports XI (11.0.0.1282) on our Business Objects Server.
When we run a report with a date parameter in it, in either Crystal Reports Designer on the server or via Business Objects Info View our date parameter prompt displays an error.
The error shows on the prompt page, it has the word "Business Objects" in it and a red circle with a white X in the middle of it. Then in two lines below it has the letter "i". It looks something like the following...
Business Objects X
i
i
I'm not sure what has changed as we don't use date parameters that much. On my local PC I have Crystal Reports XI (11.0.0.2495) and when I create a report with a date parameter and run it I don't get this issue.
I have previously had Crystal Reports Designer XI (11.0.0.2495) on the server however I repaired my Business Objects XI R1 installation to see if this would fix the issue. This changed the version of Crystal Reports Designer from 11.0.0.2495 to 11.0.0.1282 but I still have the problem.
I've had a look around the forums and there are a couple of other people with this question however no answers. I've compared my local path variable with the server path variable and they are pointing to the same locations.
So I guess there is a common file that both Business Objects Info View and Crystal Reports Designer use. If it's prompt.dll the version I have on my local PC is the same as the version on the server (11.0.0.2478).
Any thoughts?
Cheers,
Chris Rutherford

Hello,
Just to let you know we figured this one out. At some point I'd installed Crystal Reports Designer XI R1 on the server (must have service packed it as well). This is a good thing as it's helped troubleshoot various connection issues etc.
However this overwrote the prompt.dll file, the version of the new file was 11.0.0.2478. I've since installed Business Objects XI R1 on my local machine without Crystal Reports to see what the version of the prompt.dll file would be. It was 11.0.0.1282 so I replaced the newer prompt.dll with the older one and problem fixed.
Cheers,
Chris

SMARTFORMS: 'OUTPUT CANNOT BE ISSUED error

Hi,
I have designed a smartform for Delivery document. One of the delivery has 700 lines of Packing for 1 single line item. When I execute this delivery, the output is not displayed The error message is "the output could not be issued".
In debug mode I find that it is giving error in function module SSFCOMP_WRITE_TEXT for the 518th line of the packing list. The data in this line is similar to previous lines and there does not seem to be anything different in this line. The function module is returning sy-subrc = 2.
if i reduce the packings to 517lines, then the document gets printed correctly. Otherwise it gives an error.
I need to display the line item alongwith the entire packing lines.
Please help.
Thanks and Regards,
shilpa

Hi Shilpa,
First don't run thro the program.
u just activate the smartform and then execute the Smartform. then u see the exception. the error belongs to window size is not enough space to write the text. Maybe it is overlapping the other windows.
So correct the window size then u run thro the program.
Otherwise it is related to Alignment problem. That means check margins and positions.
- Selvapandian Arunachalam

Userform controls disappearing in Word 2013/Windows 8.1 with High-Res display - DLL error?

I have a .dotm file with a large number of modules and userforms. Creating new documents from the template works fine on almost every computer I've tested it on (hundreds), but I've run into a setup that fails consistently.
Two different Samsung ATIV 9's with a high res display and Windows 8 (64bit)/Office 2013 show the same problem:
When opening a new document based on the template for the first time, it works fine. If I open the VB editor, everything looks normal, userforms are intact.
On the second and all consecutive attempts, it throws a "Type Mismatch" error. Opening the VB Editor, I get a compile error on lines of code referencing components of the first userform (alphabetically). Opening that userform, it shows only a blank
multi-page control, and all the other controls are missing - hence the new compile errors on controls that used to exist. If I remove that userform and save the file, the project compiles, but opening a new document from the template will result in "Word
has stopped working..."
I can actually reproduce this behavior starting from scratch - new blank document, save as a .dotm. Create a new userform and add a multipage control. Clicking any control in the toolbox to add it to the form will result in a "Type Mismatch" error,
even though there's no VBA code. I can then successfully add the control to the form. But, once I save and reopen the template, the multi-page control is blank, and the other controls I put on it disappear.
I at one point got an error from the VB Editor that it "could not open macro storage" and the included help suggested that might be due to an incorrect version of vbe7.dll.
The only copy of vbe7.dll I could find was at:
c:\Program Files\Microsoft Office 15\root\vfs\ProgramFilesCommonX86\Microsoft Shared\VBA\VBA7.1
The dll version was 7.1.10.44
I tried replacing that file with a vbe7.dll file from a working computer (version 7.0.15.89 from c:\Program Files (x86)\Common Files\microsoft shared\VBA\VBA7), but that just resulted in the VB editor not loading at all.
I have tried both a 32bit Click-to-run version of Office 2013, and installing off a CD with 64bit Office 2013, both had exactly the same error.
The reason I'm wondering if it's a high-DPI display related error is that googling about vbe7.dll errors, I came across this hotfix:
http://support.microsoft.com/kb/2880496/en-us
which claims it "Fixes various Visual Basic for Applications (VBA) issues with displays on high-DPI devices."
Neither the 32bit or 64bit installer for that hotfix would run, they said there was no affected programs installed.
My reasoning for suspecting a hardware/DLL incompatibility is this:
1) It's not the template or the VBA code, since those work elsewhere and the same behavior happens with any file with a userform
2) It's not the Office version, since both 32/64 bit, MSI and Click-to-run didn't work
3) It's not Windows 8.1, since this same template works fine on other machines
4) The first time I open the template on the affected machines, it works fine - but the template is shipped compacted and decompiled. After I open it once and then close, Word has compiled the code and corrupted it somehow, because whatever the first userform
was in the list shows up as blank.
5) It feels hardware-specific, since out of hundreds of machines, I've only seen this behavior on two of the same laptop model - seems like too much of a coincidence.
Is there any chance the VBE in Office 2013 is somehow incompatible with this hardware? If that might be the case, does anyone have any idea how I'd go about testing and/or fixing it?
Any thoughts are much appreciated.

Hi Chris,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59861.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. If you see an entry for IDT HD Audio ( or very similar IDT entry ), right click the device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall. If there was no IDT entry, just proceed below.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

PDF Document Display Issue - iPad Mini iOS 8.1

I use my iPad heavily doing in-home sales. I rely on a combination of Box, PDF Expert, and Notability to retrieve and create information/documents.
After updating my iPad Mini to iOS 8, I started having a display issue when trying to pull up my pricebook in front of a client from Box, where I've always pulled that document from. It showed me one page, and the rest were blank. I opened it in PDF Expert, thinking it was a Box issue - and this time the document was blurry. Being a good stubborn Irishman, I whipped out my iPhone 4 and opened the document fine in Box.
Afterwards, I download DROPBOX, opened the file in iBooks, deleted applications and re-installed them - all with varying challenges and 0 results. The same document opens up great in my iPhone, just will no longer work correctly on my iPad Mini.
Anyone else having this issue?

Hey there Haparari,
Welcome to Apple Support Communities.
It sounds like your iPad is in recovery mode after running into an issue updating it to the latest version of iOS with iTunes on your computer. Take a look at the article linked below, it provides troubleshooting suggestions that’ll generally resolve that specific alert message that you’re seeing.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Ciao,
-Jason

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". I've quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. HELP

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ram

Hello,
Adobe has brought these new links in this matter:
Troubleshoot Creative Cloud download and install issues and
App doesn’t open; progress wheel spins continually
Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

Bizarre & Random Dashboards Display Issues/Errors

Similar Messages

Maybe you are looking for