Finding all records created today after 5 pm

To fetch all records created after 5pm today, i use
SELECT * fROM purchase_orders
where created_on_dt > to_Date ('26/07/2010 17:00:00','dd/mm/yyyy hh24:mi:ss')Is there a simpler way to fetch this?

Are you sure:
1 with t as (select trunc(sysdate)+8/24 created_on_dt from dual)
2 select * from t
3* where to_char(created_on_dt,'HH') > '05'
SQL>/
CREATED_ON_DT
26/07/2010 08:00:00It is always better to compare dates to dates if you want the correct results.

Similar Messages

How to get all records created this month?

Ok I'm trying to write a query that would get records that were created this month or later but not in the past.
So today is Nov 16th 2009
I need to look for all records created from 11/2009 and onward (>11/2009)
Any ideas?

Do you have any field like "create_date" on that table ? Here is simple qry
with t as ( select 1 as id,to_date('01-OCT-2009','DD-MON-YYYY') as create_date from dual
UNION
select 2,to_date('11-OCT-2009','DD-MON-YYYY') from dual
UNION
select 3, to_date('02-NOV-2009','DD-MON-YYYY') from dual
UNION
select 4, to_date('01-NOV-2009','DD-MON-YYYY') from dual
UNION
select 5, to_date('13-DEC-2009','DD-MON-YYYY') from dual)
select * From t
where CREATE_DATE >= trunc(sysdate,'MON')Edited by: rkolli on Nov 16, 2009 1:23 PM

Right syntax to find all records of a class

I want to find all records of a particular entity class available in DB. I find that the following query works fine when using Hibernate as JPA provider, but fails when using Glassfish's default (Toplink).
SELECT p FROM com.mycompany.Person pAs per JPA spec, which is the correct form to refer to an entity class in queries? Is it the fully qualified name or only the simple name? If it is only the simple name, how do I manage rare cases where two different packages have classes with same name?

Sorry for wasting users' time. A second look into the JPA spec answered it.
For those coming across this problem, entity name of a class defaults to its unqualified class name. :)

How do I get LR4 to find all photos in catalog after replacing hard drive on mac? question marks all

I had the hard drive replaced on my mac. I did a restore from back up drive to my new hard drive. First LR4 couldn't find the catalog so I pointed to it. Then I opened lightroom 4 and it cannot see ANY of my photos. I don't want to link each folder full of photos it will take hours. Isn't there another way to do this so it finds them all at once? Photos are still located in the same location on the new hard drive after restore. Nothing changed except the hard drive. Thank you!

I did find something in another post that suggests to go to the top most file in the structure and right click and click on "find missing folder" then you point to that folder and it will find all subfolders and photos. This really worked well for most of the photos but I have I must have moved at some point that I will have to relocate. This is good information whether you are working with a Mac or a PC. I think it would work for either. I hope this helps someone else out there.

In FINDER, all applications have .app after it now, why?

HI!
Just got a new iMac. Used a firewire to migrate the date from my old eMac.
Anyway, now in FINDER, all of my applications have .app after them (iPhoto.app, Dictionary.app, iChat.app, etc).
When I click on something in Finder...I have to double click it and it opens the application directly. If i single click it highlights it in black.
Before, when I would single click on iPhoto (for example) it would open a new screen with the camera icon and information on iPhoto, then I would single click the camera icon and then iPhoto would open.
How do I get rid of the .app? I like the single click and not opening an app directly?
Thanks!!

Wow! Such an easy solution to a problem that I could not figure out! Thank you so much.
Just to let you know, I even went down to the Apple store and asked then what to do and they didn't know! They told me to leave it alone.
LOL!!
Why would they have the option of .app or not? I mean, what do some use a .app for when you know it is an application?
(to add....I have another question in iPhoto 08 if you are interested ........

Custom Search Portlet : Find all item created in a such year

Hi,
I'd like to find the way to search for items created in a such year.
I have added the 'created on' attribute in the form, but the operator is equal lower of higher.
What I need is to find the item created from 1st January to 31 December.
Does anyone have an idea ?
Benoit Pironet

hi,
this is the expected behavior. the way it is working is that the search portlet is going against the search index. in fact there are 2 search indexes on the server: one for the meta-data and one for the content. both indexes are craeated using oracle text. by default the indexer is refreshed every 1 hour due to performance reasons.
if you want to change this you can do it - this is described in the portal configuration guide. you can also real-time synch your indexes. this is a new features in 10.1.4.
http://download.oracle.com/docs/cd/B14099_18/portal.1014/b19305/cg_srch.htm#i1027594
8.3.5.1 Synchronizing Oracle Text Indexes
hope this helps.
regards,
christian

Find all records that have character alone in a string

Oracle 10g Enterprise Edition
Hi all,
I must select from a varchar2 field, all the records that have a character (number or char) alone in the string.
For example.
ASDF BHGR H RR (yes, cause "H")
ASDF BHGR H4 R (yes, cause "R")
ASDF B H4 DDR (yes, cause "B")
ASDF B H4 DDR (yes, cause "B")
ASDF BC 1 DDR (yes, cause "1")
ASDF BC / DDR (yes, cause "/")
ASDF BHGR H4 RR (no)
ASDF (no)
I'm trying by SubStr, but I cannot generally solutions.
Thank's for any suggestion.
Ciao

Ok, just a try :
SQL> with tbl as
2 (select 'ASDF BHGR H RR' str from dual union all
3   select 'ASDF BHGR H4 R' str from dual union all
4   select 'ASDF B H4 DDR' str from dual union all
5   select 'ASDF BHGR H4 R1' str from dual union all
6   select 'ASDF BHGR H4' str from dual union all
7   select 'ASDF - H4' str from dual union all
8   select 'a1 ASDF BHGR H4' str from dual union all
9   select 'ASDF B H4 DDR' str from dual union all
10   select 'ASDF BC 1 DDR' str from dual union all
11   select 'ASDF BC / DDR' str from dual)
12 select str,
13         decode(regexp_instr(str,'^. | . | .$'),0,'no',decode(regexp_instr(str,'^- | - | -$'),0,'yes','no')) res
14 from tbl;
STR             RES
ASDF BHGR H RR yes
ASDF BHGR H4 R yes
ASDF B H4 DDR   yes
ASDF BHGR H4 R1 no
ASDF BHGR H4    no
ASDF - H4       no
a1 ASDF BHGR H4 no
ASDF B H4 DDR   yes
ASDF BC 1 DDR   yes
ASDF BC / DDR   yes
10 rows selected.May is there is a simpler way.
Nicolas.

I can't find all of my filters after ps 2014 update

I lost my oil paint and a lot of other filters after cloud updated to 2014. What do I do?
Ken

<moved from cc - kglad>

HT4946 how do I find quickvoice recording via itunes after I syn my iphone with macbookpro? michael

that's it how to I vind quickvoice recordings via itunes after I sync my iphone.. very frustrated, Michael O.

Itunes should put them in a playlist called voice memos

Cs5 is asking me to find all media associated with a project file imported from FCP BY HAND.

Please tell me there is a way around this.
I have an XML file that was exported from FCP and I'm importing it into CS5. I have the drive with all of the media on it. I load up the XML and CS5 is asking me to find every single piece of media involved with the project by hand on the drive. THis is insane and will take me hours. Why will it not locate it itself? Please someone tell me there's a way to let it search throught he folders on its own.

Repeating some of what has been stated here....
What PPro is looking for is the assets in the same directory structure as when the XML file was created from FCP. So let's say that as you were about to save the XML file from FCP, you had all the assets on 1 single drive. Some were in Folder A, some where in Folder B, some in Folder A-1 (a subfolder of A) and some in Folder B-1 (subfolder of B). As long as the files remained in roughly that same folder structure in relation to one another, PPro should be able to find all the other assets AFTER you've found the first one.
With all the translation if you go from a Mac to a PC system, there's a lot of chance there that the directory structure - even if you kept it basically all intact - could still be messed up. Once the XML is loaded into PPro, however, you should be able to select multiple offline clips in the project folder, choose "Link Media" and have PPro go through and (hopefully) find everything automagically. If not, the Finder button in the "Link Media" dialog box should help.
PPro doesn't really care specifically about folders and subfolders when relinking, it is just looking for the RELATIONAL structure based on the last time the assets were ONLINE in the project. So even if your original assets were in 1,400 different folders, it shouldn't require you to relink based on each individual folder, so long as the RELATIONSHIP between all the files and folders remained the same.
Hopefully that makes sense. I know when I work with FCP editors the footage is generally handed to me on a drive with all the assets being essentially in a very different relationship than when they were on their FCP projects (since they usually are going from multiple drives on their Mac to the single drive that they hand me with the project assets). So I'm usually required to manually relink all the assets anyway. Kind of a bummer, but thankfully most projects are limited to only about 100 assets or so, and filenames are generally unique.
Good luck!

Spotlight created:today and mdfind

Reading various sites and "OS X missing manual" I was lead to believe that typing
created:today
in spotlight should produce all files created today. This however does not work for me in Snow Leopard.
Even more if you try
$ mdfind -interpret "created:today"
from the command line you get:
Failed to create query for '( || || (kMDItemCreationDate = "today*"cdw))'.
However, the following does work:
created:10/09/09
Note also that the short date format has to be typed as it is defined in your system date format preferences (which for Canada is set to yy-mm-dd which is completely wrong. We don't write dates like that here, but that's another topic altogether).
So, anyone got any ideas why symbolic today doesn't work in created:today?

Maybe.
One way to do it is as follows. In the finder window, ⌘+f. Then click the '+' sign to the right of the Save button. Click on the pull-down that reads "Kind", and choose "Created date". Click on the pull-down that reads "within last", and choose "today". If you wish to save it click save, give it a name. if you do this search often look for this file in the Finder and drag it to the toolbar.
I'm thinking that the reason that "created:today" isn't working is that to get the entire day is a range. If you step through the exercise above and then look at the file that's created you'll see the following among other things.
InRange(kMDItemContentCreationDate,$time.today,$time.today(+1))

How to find who has created the condition records

hi all,
in POF1 condition records were created.for material and plant.how to find who has created condition records for the material and plant.
is there any way to find who has created please help me out.
thanks
sunny

Hi,
There are two ways of finding the who has created the ondition record.
01. This is through the sales order-> Item details level-> condtion Tab----> Select the condition type and click on dispaly condition record below in the same creen. Then Goto tab on the menu and select the overview of the condition record. After do so you will have the details of diffrenr tabs. In this you need to select the Administrative data for the person who had created the condition record.
02. Goto T. Code VK13 and give your condition type for which you need to find the person created the record. Select the header details tab for the person who had created the record.
Hope this is fine with you.
Bye & Enjoy SAP.
Koganti

Execution does not end even after all records updated..

Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...

Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang.

QI Info record created after PO....

Dear ALl,
QI info record created after PO for the material. SO i wan to know whether system will give error in this case?
Regards,
Kaushal Rai

Dear Shyamal,
There is no ponit of date. Its correct that PO will not be created for that material which is having procurement key active.
PO created before or after QI record doesn't matter. Only thing QI info record should be there at the time of creation of PO.
But i don't know why in PO still I am getting the same error even after creation QI record. Material, Vendor, Plant, PR all are same.
Regards,
Kaushal Rai

Need to find all Bugs and QF created for 8.0.0.13

Hi all,
I kneed to know how to find all bugs and possibly patches/QF created on top of 8.0.0.13 for bugs found in 8.0.0.13 after its release on Jan 2012. This is for my Customer that needs to know if they have to plan some QF in proactive way.
I can access to Internal Support Portal, so if there is any place where Support people can go I can access.
Thank you in advance
Chiara Scarafiotti
ACS TAM

Hi radhika,,
This the the way to go..just modify the col according to your table col names...
You can do a CONNECT BY query without a START WITH clause to link every node with each of its ancestors.
Getting the total is just a matter of GROUP BY.
SELECT emp_id, employee_name, manager_id
, CASE
          WHEN COUNT (*) = 1
          THEN 0
          ELSE COUNT (*)
     END               AS cnt0
,     COUNT (*)      AS cnt1
FROM employee
CONNECT BY emp_id     = PRIOR          manager_id
GROUP BY emp_id, employee_name, manager_id
ORDER BY emp_id;
output:
Output:
. EMP_ID EMPLOYEE_N MANAGER_ID CNT0 CNT1
1 Mark 0 5 5
2 John 1 3 3
3 Stella 1 0 1
4 Karen 2 0 1
5 Andrea 2 0 1
I made this a bottom-up query (going from each node to its ancestors) rather that a top_down query (node to descendants) because you can't GROUP BY CONNECT_BY_ROOT.
In your description you implied that each node would be counted among its own descendants, but in the sample output you had 0, not 1, as the count for all the leaves, that is, managers counted as their own descendants, but non-managers did not. The column called count0 in the query above does that; the column count1 counts each node as its own descendant, leaves included.
Regards
Onenessboy

Finding all records created today after 5 pm

Similar Messages

Maybe you are looking for