Finding component that does not close JCO connections
Hi,
I'm working on a big project with many webdynpro components. My problem is that I seem to be loosing JCO connections. After a while I get JCO connection errors. I just can't find which component is causing this. I checked over and over again.
Is there a way to check how many JCO connections an application/component has or at least how many open connections a model has?
I really need to know which component is causing my loss of JCO connections.
Thanks all!
Jeschael
Hi Jeschael,
Go to System Administration -> System Configuration -> Select Web Dynpro Console -> (Model & backend- You can check JCo performance by component) or ( JCo Connection Pools you can check max. calls and active connections for JCos)
Regards,
Siva
Similar Messages
-
Parsing XML from a socket that does not close
Hi -
I've seen similar questions to this already posted, but either they did not really apply to my situation or they were not answered.
I have to read messages from a server and process them individually, but the protocol does not indicate the message length or give any sort of terminating character. You only know you have a complete message because it will be a well formed XML fragment. To complicate matters more, there could be extra binary data preceding each XML message. I must stress that I did not write this server, and I have no influence over the protocol at all, so while I certainly agree that this is not such a good protocol, changing it is not an option.
I'm hoping that there is a reasonable way to deal with this with an existing parser. Ironically, I don't really need to parse the XML at all, I just need to know when the current message is over but the only indication I get is that it will be the end of an XML fragment.
I do have the ability to strip off the non-XML binary data, so if there is some way that I can give the stream to a SAX (or other) parser when I know XML is coming and have it inform me when tags begin and end, or ideally inform me when it is done a complete XML fragment, that would be perfect. I'm aware of how to do this using SAX normally, but it seems that it will not function correctly when there is no EOF or other indication that the document has ended.
The best algorithm I have come up with (and it's pretty cheesy) is:
1. Start with a string buffer.
2. Append data from the socket to the buffer one byte at a time.
3. Keep checking if there is a '<' character that is not followed by '?' or '!'. (ie - don't concern myself with the special XML elements that don't close with '/>' or </tagName>. I keep them in the buffer to pass on when I'm done though.)
4. When I get my first tag with <tagName> I make note of what this tag is and increment a counter. If the tag is self closing, then I'm done.
5. Anytime I see this tag I increment the counter.
6. Anytime I see </tagName> I decrement the counter. If the counter = 0, I am done.
7. I pass on the entire message, preceding binary data, special XML tags and the fragment to the module that actually processes it.
This has a few problems. I'll have to go out of my way to support multiple character encodings, I'll have to be careful to catch all the special XML tags, and its quite CPU intensive to be interested in every single character that comes down the pipe (but I suppose this is not avoidable). Also, I just don't like to re-invent the wheel because I'm likely to make an error that a well established parser would not make.
Does anyone have any suggestions for this, or know of a parser that will deal with fragments using streams that don't close?
Thanks!The parser expects to read to the end of the stream. If you closed the stream right after you wrote to it, I bet it would work. You wouldn't want to close the stream though would you? Try sending the string using a DataOuputStream and calling DataOutputStream.writeUTF(String) on the client side. Then, on the server side call String str = in.readUTF() (where 'in' is a DataInputStream). Then wrap the string in a StringReader and give the StringReader to the parser as it's input source.
-
Process that does not close and consumes 50% of CPU
I have Windows 7, x86 and Reader v 11.0.5
The issue is that when i close the application after viewing a file, the process "AcroRd32.exe" (actually there are two with the same name) take the CPU to 50%
Here is a screenshot
I took it after closing readerHi MS_DC_1,
Please try repairing Acrobat and check. Is this reproducible on other machines in your environment or is it machine speciifc. -
An Attempt was made to reference a token that does not exist - SAPB1 8.8
Dear All,
System throws an error message as "An Attempt was made to reference a token that does not exist" while connecting Add-on in Client system in SAP Business 8.8 version
Please do the needful
Thanks & Regards
Venkatesh NHi Venkatesh N,
Are you got any solution for this issue?
I also face a same problem with you. I got the a reply is "Reinstall the application".
But this is not the main solution for the problem.
If you got any solution, hope you can share with me.
Thank you.
regards,
Sheon -
HT201737 how do you close a thumb drive that does not show in finder?
How do you close a thumb drive that does not show in finder?
What do you mean by "Close?"
Eject??
If so, you could use Go to Computer to find it if it is not in the Sidebar or on the Desktop. Ctrl-click or Right-click on the drive and choose Eject <diskname>
Or, you could set it to show in the SideBar in the Finder Preferences, SideBar tab. Then, it would have an eject icon next to it in the Sidebar. -
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
Hi. I am receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber (as I now have a receipt for that purchase). It states that it is billed to store credit. (a) I don't want to receive this person's information and (b) I certainly don't want to somehow be charged for it (although it appears, thus far, that I have not been). What's going on?
i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue -
I have a new 21" iMac to replace a 6-year old iMac 24. My Time Capsule has the iDVD app saved (?) and I can find it, but I can't figure out how to move it to my new iMac that does not have the app. How to do this?
You are probably better to install it from ilife disk.
Can't Find a update or latest Version of iDVD to Download or a Compatibility to Yosemite -
I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.
I do not know wat "reeked to reset" means.
Try the following:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then on your router.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP
I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default. -
i download the recent ios for iphone 4. i connected iphone 4 to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support the lastest version of ios?
Yes, due to Incomplete Software Update on your iPhone your Device is now in Recovery Mode and you cannot take a Backup now. But if you have taken a backup earlier then you can Restore that backup on your iPhone after you Reset your iPhone to Factory Settings.
-
I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?
I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.
-
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Maybe you are looking for
-
I've been editing some iPhone 4 footage with my OWLE BUBO in Final Cut Pro lately and im really getting into it more. I'm thinking of getting a T2i or perhaps even a 5D pretty soon. Even with my iPhone footage that i transcode into ProRes, i notice a
-
Gifted me an Application via email and i havent got the mail yet..
-
Migration from MS Access to Oracle 8
Sir, I have exported the MS Access table from MS Access to Oracle in the following way. I have selected the table from MS Access and clicked on export and then it asked for exporting option. I have selected ODBC databases and given the option from 'e
-
Cisco ISE integration with SMS passcode Device
HI Experts, i have a scenario where the requirement is to integrate the ISE device with SMSpasscode device which will trigger the OTP to the mobile devices Currently i have my authentication configured to work with the AD When my VPN users connects
-
Gurus I am working on CATS. Is there any standard report which displays number of hours worked by an employee i.e, overtime + regular hours. and display employee who has worked more than 8hrs of overtime(including regular time). I want to avoid ABAP