Finding errors in IDOC

Hi all,
Plz tell me how to see the errors displayed in IDOCs.
Thanks
Venkat

using the t-code we19 u can post the idoc .
after posting using the status code in status
record we can fine the idoc status. using that status code we can find the error idocs in SAP

Similar Messages

How to find out the IDOC number(urgent)

hello every one,
i had recived all the data to BW from R/3 but the request is still running in the system
for this i need to manually release the IDOC for BD87
can any one please help me How to find out the Idoc Number in R/3 and In BW for the particular load
Regards
Sandy

hi Siva,
thanks for ur valuable answer,
it is showing IDoc num for the succeeded one....
my present error is Data pack 1 got error and Datapack 2 was success,
their 3IDocs are their in detail tab all are success
as per my knowledge it will for the Data pack 2 and it is showing 3different
how can i find the Idoc which was struck .....
that need to process manually in BD87..
please suggest if i am wrong
Regards
Sandy

Regarding EDI: Syntax error in IDoc (segment cannot be identified)

Hi,
My requirement is that I was adding two diffrent field values under two diffrent segments as "E1EDKA1" and "E1EDK02" in outbound invoice IDOCS, INVOIC02 (process code: SD09 - IDOC_OUTPUT_INVOIC).
I am getting the IDOC number through Tcode "VF02". Can any body give me idea how to check that syntax error in debug mode.
Please find the following error details using TCODE "WE02".
*EDI: Syntax error in IDoc (segment cannot be identified)*
*Message no. E0 078*
*Diagnosis*
*The segment E1EDKA1 does not occur at the current level of the basic type INVOIC02 (extension ).*
*This error can have several reasons:*
*The segment E1EDKA1 is assigned to a group whose header segment does not occur.*
*The segment E1EDKA1 does not exist in the syntax description of the basic type INVOIC02 (extension ).*
*The sequence of segments in the group in which the segment appears is incorrect.*
*Previous errors ('mandatory' segment or group missing) may be due to this error.*
Please help me to resolve this problem. <REMOVED BY MODERATOR>
Regards,
Skumar.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:09 PM

It seems that you added segment E1EDKA1 at a place where it is not supposed to be. That's where this error is coming from. The structure of every IDOC is definded by SAP standard and you cannot change the sequence or the level of standard segments. If you require a certain field at a certain level you have to add that field to a Z-segment and then add that Z-segment where appropriate in your extension.
Hope that helps,
Michael

Idoc status error 66 - IDoc must be processed later; 000006 , IDoc no. 0000

Hi,
The following error appears when a particular Idoc is trying to get posted
Status 66 - IDoc is waiting for predecessor IDoc (serialization)
Message - "IDoc must be processed later; 000006 , IDoc no. 000002 required."
What is this error all about? How do I find out which is the predecessor Idoc which has to be posted first. I can not find any other idoc numbers mentioned here.
Thanks in advance

Rhea,
What you have mentioned is clear for me too. But the question is how do I trace the predecessor idoc? 0002 or 0006 are not Idoc numbers. They are Idoc types.
Any way in which I can trace out the predecessor idoc?
Regards

How to find Error Reference Number Additional details in HFM


Hi All
How to find Error Reference Number additional details in HFM ?
Example:
Error Reference Number:{01977FBD-DB42-4655-99B5-4ABF38D3E082}
Where to Find above id additional details??
I mean HSVErrorLogViewer ? OR RegistrySettings ? OR Dcomcnfg ? OR any other way to find the detailed information?
Any ideas? Appreciate your help in advance.
Regards
Taruni


Hi,
try menu - EDIT - LUW debug
and see if you can get the idoc number in this way
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Error in Idoc with status 26

Hi,
IDOC showing an error messge when syntex check.
EDI: Syntax error in IDoc (segment cannot be identified)
Diagnosis:
The segment E1EDP19 does not occur at the current level of the basic type ORDERS01 (extension ).
This error can have several reasons:
The segment E1EDP19 is assigned to a group whose header segment does not occur.
The segment E1EDP19 does not exist in the syntax description of the basic type ORDERS01 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Please help me....
Regards,
Sudha

Hi,
I have pasted a portion of my code:
DATA: BEGIN OF GT_EDIDC OCCURS 0.
        INCLUDE STRUCTURE EDIDC.
DATA :END OF GT_EDIDC.
DATA: BEGIN OF GT_EDIDC1 OCCURS 0.
        INCLUDE STRUCTURE EDIDC.
DATA :END OF GT_EDIDC1.
DATA: BEGIN OF GT_EDIDD OCCURS 0.
        INCLUDE STRUCTURE EDIDD.
DATA :END OF GT_EDIDD.
DATA : BEGIN OF GT_Z1ZPSOBJLOC OCCURS 0.
        INCLUDE STRUCTURE Z1ZPSOBJLOC. ' segment name
DATA : END OF GT_Z1ZPSOBJLOC.
* Control Record
FORM BUILD_CONTROL_RECORD .
GT_EDIDC-MESTYP = C_MESTYP.
GT_EDIDC-IDOCTP = C_IDOCTP.
GT_EDIDC-DIRECT = C_1.
APPEND GT_EDIDC.
ENDFORM.                    " built_control_record
*&      Form built_data_record
* Data record
FORM BUILD_DATA_RECORD .
LOOP AT GT_Z1ZPSOBJLOC INTO WA_Z1ZPSOBJLOC.
    GT_EDIDD-MANDT = SY-MANDT.
    GT_EDIDD-SEGNAM = C_SEG.
    GT_EDIDD-SDATA = WA_Z1ZPSOBJLOC.
    APPEND GT_EDIDD .
PERFORM DISTRIBUTE_DATA.
ENDLOOP.
ENDFORM.                    " built_data_record
*&      Form distribute_data
* Distribute Data
FORM DISTRIBUTE_DATA .
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
    EXPORTING
      MASTER_IDOC_CONTROL            = GT_EDIDC
    TABLES
      COMMUNICATION_IDOC_CONTROL     = GT_EDIDC1
      MASTER_IDOC_DATA               = GT_EDIDD
    EXCEPTIONS
      ERROR_IN_IDOC_CONTROL          = 1
      ERROR_WRITING_IDOC_STATUS      = 2
      ERROR_IN_IDOC_DATA             = 3
      SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
      OTHERS                         = 5.
CASE SY-SUBRC.
      WHEN 1.
      MESSAGE E004.
    WHEN 2.
      MESSAGE E005.
    WHEN 3.
      MESSAGE E006.
    WHEN 4.
      MESSAGE E007.
    WHEN 5.
      MESSAGE E008.
    WHEN OTHERS.
* Do Nothing
ENDCASE.
COMMIT WORK.
* Clear IDOC data internal table after use
CLEAR GT_EDIDD.
REFRESH GT_EDIDD.
ENDFORM.                    " distribute_data
Hope it proves useful.
Regards,
Gayathri

How to find out the idoc type required for our requirement

Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
Prasanna

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

Did not find error in message but message is in error

Hi dears,
i got a synchronous message in error.and i checked that in SXMB_MONI.Where its original message is recorded and its response message is in error category of 'Request Message Mapping' .with no error id.
i want to find exact error in its Trace and in error.
can you explain why i am unable to find the exact error ? kindly reply to me.
Thanks and Regards,
Sumit Gupta

Hi Michal,
Thanks for your information.but i am working in production system and not authorized to check the mapping error.
i can not find error in error and in trace.
have u encountered any times situation like this.then how had u resolved that issue. kindly guide me.
Thanks and Regards,
Sumit Kumar

Error sending Idoc's to SAP

Hi,
I'm getting error in file-XI-SAP scenario. File is read and transformed to Idoc ok, but then I get this kind of error message in SXMB_MONI:
<SAP:Stack>Error: Basic type 'HRMD_A01' is unknown</SAP:Stack>
What I'm I missing in the scenario?

Hi Tapio,
Take a look at this link:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Error: No IDocs could be sent to the SAP BW using RFC.
Hope it helps you.
Cheers,
Chandra

Getting Error in Idoc.

Hi all,
I m getting this error in idoc..
Entry in outbound table not found.
I doc number is generated..
also giving Program code ..check and tell me whr can i do change..
Following is program for idoc...
REPORT ZNA_IDOC .
*TABLES: CRMD_ORDERADM_I,CRMD_ORDERADM_H,CRMD_SCHEDLIN.
TABLES : ZNA_ID.
DATA : S_CTRL_REC LIKE EDIDC OCCURS 0 WITH HEADER LINE,"Idoc Control
*Record
KUNNR TYPE ZNA_ID-KUNNR, " SEGMENT ORDER DATA
VBELN TYPE ZNA_ID-VBELN.
*QUANTITY TYPE CRMT_SCHEDLIN_QUAN VALUE '1.000'.
DATA : ZORDER LIKE ZNA_ID OCCURS 0 WITH HEADER LINE.
DATA : T_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE. "Data Records
DATA : T_COMM_IDOC LIKE EDIDC OCCURS 0 WITH HEADER LINE. "Generated
"Communication IDOc
CONSTANTS :
C_ZRZSEG1 LIKE EDIDD-SEGNAM VALUE 'ZNA_I'.
PARAMETERS : ZID LIKE EDIDC-MESTYP DEFAULT 'ZID', "Message Type
C_RCVPRT LIKE EDIDC-RCVPRT DEFAULT 'LS', "Partner type of receiver
C_LOGSYS LIKE EDIDC-RCVPRN DEFAULT 'D11CLNT100',
C_RCVPOR LIKE EDIDC-RCVPOR DEFAULT 'A000000009',
C_SNDPOR LIKE EDIDC-SNDPOR DEFAULT 'A000000008',
C_SNDPRN LIKE EDIDC-SNDPRN DEFAULT 'D11CLNT210',
C_IDOCTP LIKE EDIDC-IDOCTP DEFAULT 'ZNA_IT',
C_SNDPRT LIKE EDIDC-SNDPRT DEFAULT 'LS'. "Destination System
***START-OF-SELECTION
START-OF-SELECTION.
PERFORM GENERATE_CONTROL_RECORD.
PERFORM SEND_IDOC.
*& Form generate_control_record
FORM GENERATE_CONTROL_RECORD .
S_CTRL_REC-RCVPOR = C_RCVPOR. "Receiver Port
S_CTRL_REC-MESTYP = ZID. "Message type
S_CTRL_REC-IDOCTP = C_IDOCTP. "Basic IDOC type
S_CTRL_REC-RCVPRT = C_RCVPRT. "Partner type of receiver
S_CTRL_REC-SNDPOR = C_SNDPOR. "SENDER PORT
S_CTRL_REC-RCVPRN = C_LOGSYS. "Partner number of receiver
S_CTRL_REC-SNDPRT = C_SNDPRT. "Sender Partner type
S_CTRL_REC-SNDPRN = C_SNDPRN. "Sender Partner Number
APPEND S_CTRL_REC.
ENDFORM. " generate_control_record
*& Form send_idoc
FORM SEND_IDOC.
*SELECT * FROM ZNA_ID INTO TABLE ZORDER.
ZORDER-KUNNR = '1'.
ZORDER-VBELN = '101'.
**ZORDER-QUANTITY = QUANTITY.
APPEND ZORDER.
T_EDIDD-SEGNAM = C_ZRZSEG1.
T_EDIDD-SDATA = ZORDER.
APPEND T_EDIDD.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
MASTER_IDOC_CONTROL = S_CTRL_REC
TABLES
COMMUNICATION_IDOC_CONTROL = T_COMM_IDOC
MASTER_IDOC_DATA = T_EDIDD
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5.
IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
COMMIT WORK.
LOOP AT T_COMM_IDOC.
WRITE:/ 'IDoc Generated - ', T_COMM_IDOC-DOCNUM.
ENDLOOP.
ENDIF.
ENDFORM. " send_idoc
thx...

The program is probably correct, however, it seems that you haven't completed the 'customizing' just yet. The parameters entered in S_CTRL_REC contains entries which have not yet been maintained in the settings.
Have a look at the settings. I have no SAP system available right now, so I can't tell you what transaction is needed, but first have look at WE20 (use transaction menu WEDI).

Regarding Getting Error in Idoc .... Outbound table not found

Hello everyone
I am working on ALE/Idoc, at the last i am getting error that idoc has created but cannot be send, I am using XML port (not file) so giving Physical Dictionary, please solve my problem where i have to change. please reply its urgent.
Thanks & Regards
Vimarsh B.

Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple

Error in IDOC generation

Hi Gurus,
I have got an Error in IDOC Processing from other interface.
The IDOC status is 51 and we are using it to create Promotion Deal in
SAP ERP through IDOC from other interface.
The Error i am getting in Status Record is that "Promotion is Duplicated
along with Promotion Deal Number"
I have also checked the Promotion Deal No in VB 33 but it is not existing.
Please could you suggest where is the possible error.
I have also checked the Control Record it is correct.
Awaiting for response.
Thanks,
Sam.
+

Hi,
Reprocess the IDOC by using the T.Code "BD87".
Even if the same error persists,try to change the data manually by using the T.Code "WE19".
Check with the ABAPer for debugging the code.
Regards,
Krishna.

Syntax error in IDoc (too many repetitions of a segment)

Hi,
I tried to load master data from R/3 into BW system. The load is not ending and the IDoc error message is displaying,
The error message is " EDI: Syntax error in IDoc (too many repetitions of a segment) with status 26" .
I tried to analise the issue and checked in the Idoc List Outbox of BW system. I found Red status message with number 26 stating " Error during Syntax check of IDoc (Outbound) and the message type is RSRQST.
Could any one help me out in solving this problem. Reply to the message if any more information needed.
Thanks in Advance.
Regards
Koushik

I'm getting the same error. I think it is because I have a InfoPackage selection routine, that selects more than 1000 select conditions. I guess it is a parameter that needs to be changed somewhere. Any help on this one?
BR
Øyvind

Finding an order idoc

Hi Experts,
How do we find an order idoc. For a delivery idoc we can goto the tab, services for object and can find the Display Relationships and can go directly to the idoc. Is ther any direct way to go and find the order idoc in same way?

hi,
this is to inform you that,
to find the IDOC number VIA sales order :
Extras - Output - Header - Edit you will find the Output type
Goto - 'Processing log' you will find the Idoc number which has been created for the sales order.
hope this solves your issue.
balajia

Getting error in idoc FD 008

Hello ,
i am getting an error in idoc which is related with Tax code & Tax rate conversion in EDI . The Message number is FD 008 and message is "Assigning a new tax key for and VAT .000 not possible .
Can anyone please help me what could be possible cause of this error and how can i correct it.

hello,
see if your tax code has a correct value and it is not blank.
best regards,
swanand

Finding errors in IDOC

Similar Messages

Maybe you are looking for