Finding include program of the subroutine by program

Hi All
Is it possible to find the include program name of the sub-routine by any FM .
Thanks
Vinay kolla

i have got sub routine name , is there way to program and find the main include program of it .if yes how .
Thanks
Vinay kolla

Similar Messages

  • Could not find a part of the path 'C:\Program Files\Update Services\Schema\

    clean SC 2012 R2 RTM.
    1. had problems with WSUS installation/post configuration
    2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
    I followed the suggestion: reinstalled WSUS using ps and wsusutil.
    I canceled WSUS configuration at recommended step. Everything looked fine.
    But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
    I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
    When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
    Any suggestions for fixing this.
    Thanks.
    Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
    This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
        SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
    Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    >Any Errors in SUPSetup.log and WSUSCtrl.log log files?
    No errors in these files. As I mentioned there is no Schema folder in  Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ 
    Here are 3 repetitive errors in WCM.log:
    1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
    2. Failed to publish client with error = 0x80070003
    3. HandleSMSClientPublication failed.
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

  • Execution of workflow automation failed due to "Could not find a part of the path 'D:\Program

    Hi,
    Execution of workflow automation failed due to "Could not find a part of the path 'D:\Program Files\NetApp\WFA\jboss\standalone\tmp\wfa\workflow_data\35517.xml"
    Netapp case has been raised  and confirmed there is no issue with the WFA application, no clue to diagnose the issue.
    Execution fails continously 3 or 4 runs then get success, intermittent failure occurs.
    WFA version :2.2
    OS: Windows 2008
    Can someone please help me to fix the issue?
    Thanks
    Deepak

    Parag also pointed out that the BURT number is 833488 which has been fixed in 3.0.Please read the public report for more details. RegardsAbhi

  • I want to create an app.  Can you tell me the difference between iOS developer program and the mac developer program?

    I want to create an app.  Can you tell me the difference between iOS developer program and the mac developer program?
    Is the difference the device you're creating your app on, or for?

    iOS Developer Program is only for those who wish to develop iDevice apps. Mac program is for those only developing Mac applications. If you wish to do both, then you need to enroll in both programs.

  • Syncing Multiple Gmail Accounts including Labels to the Apple Mail program

    First please point me to the correct thread if previously discussed;
    I currently have multiple Gmail accounts; with each account I have several "labels". I am trying to sync my multiple Web-Gmail accounts and labels(folders) to the one Mail program (i.e. Have each gmail account/labels show up in Mail as they do in Gmail). Is there a way to sync/coordinate the Gmail accounts & labels with Apple Mail and sync vise-versa (ie. move to an email in Apple Mail to a Gmail label(folder) then it sync the same in Gmail, or move an email in Gmail then it updates the same in Apple Mail)?
    Appreciate the help!

    i have it working now.  i have gmail forwarding my email to my me/icloud email, which are then pushed to the device instantly, when i respond it shows as coming from my gmail account since i disabled the apple outgoing smtp server and am using the gmail one.  i just tested it a bunch of times, gmails are definetly being pushed to my iphone and ipad, coming thru instantly.
    the only problem i cant figure out is why the iphone 5 is so slow to send thru the gmail server when the ipad sends instantly.

  • I recently had to use a Western Digital Smartware backup (I used their program, not the Windows backup program).

    One of my hard drives (two physical drives in a RAID array that made them look like one big drive) failed, and had to be replaced. The computer has been repaired and I have restored from backup. I have looked in the user/desktop directories and the only bookmark file I can find is dated 8/2012 (This is 5/2013). Is there another place, Firefox bookmarks are stored, where I can look for a more updated file to import? Thank you!

    It seems that my bookmarks cannot be recovered from the last backup I made. I was able to restore from an older backup. HOWEVER,
    1. None of the 'unsorted' bookmarks appear? Shouldn't they be part of the backup of bookmarks? It is POSSIBLE, but not PROBABLE that I had no "unsorted" bookmarks as of the backup date.
    2. The (2nd to last) backup of my hard drive was done in November 2012, but the bookmarks are dated AUGUST 2012. That was from the desktop. Why didn't my backup file contain bookmarks after August?
    a. - Doesn't Firefox keep the latest bookmarks file ? Where, then?
    b. - Do I have to actually tell Firefox to make a backup of the bookmarks to have one available?
    - Still missing over 100 bookmarks!
    Thanks!
    - Annette

  • Find which report invoke my module pool program

    hi everyone,
        I have a problem of finding which report calling my module pool program.
        I have one module pool program and 5 reports. In all 5 reports i use
    call transaction to fill up the screen values of that module pool program.
       Now i have to change screen output depending upon the each report.
    So i have to find out which report call my module pool program
       Is there any possiblity to find out??? my client will not allow to use
    SAP memory or ABAP memory.
    Thanks in advance,
    Florian

    Hi,
    Check this system field. This is for procedures
    sy-cprog - In procedures called externally, the name of the calling program, Otherwise the name of the current program. If a procedure called externally calls another external procedure, sy-cprog contains the name of the framework program, and is not set to the name of the framework program of the subsequent calling program.
    may be this works.

  • The fun of programing

    if you want to find out more about the fun of programing you should check out this site
    James Coady
    "James Coady"
    http://netsoc.tcd.ie/~coadyj/

    Why?

  • The following remoteapp program is not in the list of authorized programs.

    Hi,
    Iam in a pickle at the moment.
    My RDS 2012 R2 environment was working successfully previously, arrived from holiday and it is not longer working.
    My setup:
    **RDS01 ( Session Host and Connection Broker Roles )
    **RDS02 ( Web Access, Gateway and Licencing Roles)
    The Problem i am facing is, after successfully login to the RDWeb page, lunching the remoteapp i get the following:
    1st Get Certificate mismatch ( name in the certificate RDS02.mycompany.local is not trusted )
    2nd Hit YES and the following message "Windows cannot start the RemoteApp program. The following RemoteApp program is not in the list of authorized programs: WinWord"
    It happens whether i do connect externally.
    Internally the SSO does not work ( i did check my certificate and it is installed )
    If i run the script Set-RDPublishedName and change it from remote.mycompany.com to RDS01.mycompany.local
    1st Certificate name mismatch ( requrested pc RDS01, name in the certficate remote.mycompany.com )
    2nd Hit Yes and the app works
    It happens whether i do connect internally or externally.
    Any help will be very appreciated.
    cheers
    Elton

    Hi Elton,
    It sounds like the DNS lookup is resolving to the wrong ip address.  When the RD Gateway (RDS02) looks up remote.yourcompany.com to connect to your broker/RDSH it should resolve to the ip address of RDS01, but it appears it is resolving to RDS02 instead.
    I recommend you use Set-RDPublishedName to change the name back to what is was before (remote.yourcompany.com) and verify that your DNS settings are correct.  For example, if you log on to RDS02 and try to ping remote.yourcompany.com it should try to
    ping the internal ip address of RDS01, since that is your connection broker.
    -TP

  • Find a BUG on the SOA Suite ( Internationalizing Problem)

    I am a java developer in Thailand.
    I have 4 Java Certifications - SCJP, SCWCD, SCBCD, SCJWSD.
    I meet something wrong ("bug") when I play with Oracle SOA Suite.
    About my technical software :
    -I use the Oracle Database XE (Universal).
    (I cannot use the HTML DB to run your script from soademo_101310_preview - it's give me the error messages so I change to run the SQL from command. Although running the SQL script from the command line is O.K., the command window is not support the Thai language. It appear in Alien language that I cannot read.I try to change the command window option but It has only 2 font choices. Thus I cannot still do with Thai language in the command window.)
    In control panel, the regional and Language Option, I set the standard and format to Thai (including Language for the non-Unicode program in Advanced Tab).
    I am successful both insallation and deploy the SOA book application.
    I follow the instruction in Oracle SOA Suite Quick Start Guide, 10g Release 3 (10.1.3.1.0).
    At the page 39, I find a BUG.
    My created date on the BPM Worklist is wrong !!!
    My computer time is 10 กันยายน ( September in Thai language) 2549 (Buddhist Time).
    But the date I see in the BPM Worklist is 10 กันยายน ( September in Thai language) 3635 (Buddhist Time).
    You can see the image at http://img178.imageshack.us/img178/5487/datehp3.jpg.
    I have 3 questions :
    1. How can I add the Thai font in SQL command line window (SQL*Plus) in Oracle XE ?
    2. Why does the HTML DB not support to run the uncomplete sql script ?
    3. Have any suggestion to correct the time problem. ( Internationalizing Problem) ?
    Thank you very much.

    This is not a bug.
    The timezone is based on the user profile.
    You are using jcooper, whose timezone setting by default is set to be
    <timeZone>America/Los_Angeles</timeZone>
    Please double check the
    ORACLE_HOME\OraBPEL_1\bpel\system\services\config\users-properties.xml
    jcooper should have settings like this by default:
    <name>jcooper</name>
    <description>Demo User</description>
    <email></email>
    <title>Loan Agent 1</title>
    <firstName>James</firstName>
    <lastName>Cooper</lastName>
    <manager>jstein</manager>
    <timeZone>America/Los_Angeles</timeZone>
    <languagePreference>en-US</languagePreference>
    <notificationPreferences>Mail</notificationPreferences>
    Message was edited by:
    user530868
    Message was edited by:
    user530868

  • Powerpivot add-in installation issue "Could not find a part of the path"

    Hello, 
    I got a Windows Server 2008R2 terminal server with Office 2010 and Powerpivot installed. I have an issue for some users, not every user get this error. When trying to add the Powerpivot add-in in Excel the following error message is displayed: 
    Name: 
    From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    ************** Exception Text **************
    System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto did not succeed. ---> System.Net.WebException:
    Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft
    Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       --- End of inner exception stack trace ---
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       at System.Net.FileWebRequest.GetResponseCallback(Object state)
       --- End of inner exception stack trace ---
       at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.FileWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       --- End of inner exception stack trace ---
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
    I have checked the path and I found nothing. I could understand the problem if all users got this error but it's online a handfew of users. Other users can add the add-in in Excel without any issue. All the users are in the same domain and they use the one
    and only terminal server on the site.
    Any advice? I've searched the web but haven't found anything.
    Thanks in advance!

    Guys, I think I solved the
    issue:
    Symptoms
    1. Power Pivot SQL 2012 32-bit installed over the old version without
    deinstalling it
    2. Installed with a user with administrator rights
    3. It worked under the profile with admin rights, it didn't work under the
    normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
    did not succeed.
    4. In the admin profile, it went to the path "110":  C:/Program
    Files (x86)/Microsoft Analysis Services/AS Excel
    Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    5. In the normal profile, it went to the - wrong - "10" path:
    C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
    Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    SOLUTION
    1. ADMIN: Installed VSTO 4.0
    2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
    if not, install it!
    3. NORMAL USER: Create a .reg file (Backup your registry before!) and
    use it UNDER THE NORMAL USER!!!
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
    "Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
    "FriendlyName"="PowerPivot for Excel"
    "LoadBehavior"=dword:00000003
    "Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
    Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
    "CartridgePath"="C:\\Program Files\\Microsoft Analysis
    Services\\AS OLEDB\\110\\Cartridges\\"
    4. NORMAL USER: Rename the registry key
    "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
    into
    "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
    Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
    5. NORMAL USER: Start up Power Pivot and it should
    work now!
    Analysis
    IMHO the issue lies in the fact, that the Power Pivot
    installer creates two problems:
    The first issue is that the path to the add-in under
    the NORMAL user is simply wrong and points to a wrong location (the
    "10" in the path). In the admin profile, where it was originally
    installed, it points to the "110" path which is correct.
    The second issue is that the installation procedure
    somehow needs to create a registry key (the one under point 4 in the solution)
    to complete it self and if this key already exists it fails to install and
    throws up weird error messages. If you delete or rename this key, it is created
    again (exactly in the same way) but then everything works out.
    Hope this
    helps!
    Regards, Reto

  • Re : To find the list of program in which partcular include program is used

    Someone could tell me the function module through which  it display  the list of program in which a particular include prgram is used.
    thanks in advance
    Neeraj gupta

    Neeraj gupta,
    This is SAP Business One Core forum. Dedicate to SAP Business One - a solution for SME.  Please close your thread since this forum is not related to you.
    Thanks,
    Gordon

  • How do I remove an advertising program by the name of SmartSuggestor? I cant find it in the ad ons and I cant find it in my add remove programs on my pc.

    I keep getting these stupid ads that are apparently from smartsuggestor but I cant find the program anywhere on my pc then I contacted the company and they tell me that it is a firefox issue yet i cant find it in the firefox settings either. I went into the Smart Suggestor site and the name of the extension/program came up as "No extension Found". I cant find anything that even resembles anything to do with the program at all not in the add remove program through control panel or through the extension plug ins area in firefox and was wondering if anyone else has had the same problem.
    I did not download this crap then all of a sudden I am plagued with pop up adds and other sorts of advertising all stemming from this bloody Smart Suggestor. I have got myself a good pc cleaner along with a few Malware removers and also upgraded my security programming but nothing will either find nor rid my pc of this problem. I have downloaded and reinstalled a fresh copy of Firefox and I am still having the same issue, has anyone else gone through this and how can I get rid of this problem?

    Do a malware check with several malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.<br>
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • HT1923 When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manage

    When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Execute jar file: "could not find the main class" program will terminate

    Hey,
    I am new to Java. I have started to make a small java program which supposed to help me at my studies to lean the Dominic Memory System. I have used the latest version of Netbeans 5.5.1 to build my program in. I have two problems which I cannot figure out how to solve, please help me.
    The first problem is that the java script I have made works when I compile it in Netbeans, but when I create a Jar file it does not work. I receive a pop up message in windows ?could not find the main class program will terminate? when I execute the jar file.
    The second problem I have is that I need to compare the strings generated by the "numbers" and "TIP" and if the numbers is not identical the numbers in the ?Center? JPanel should be highlighted as red.
    If anyone would like to clean up the code I would be pleased. I have copied quite a lot from anyone because of my one lack of knowledge.
    * GoListener.java
    * Created on 12. september 2007, 21:48
    * To change this template, choose Tools | Template Manager
    * and open the template in the editor.
    package grandmaster;
    import java.awt.event.*;
    import javax.swing.*;
    import java.util.Vector;
    import java.util.StringTokenizer;
    import java.awt.Color;
    * @author Computer
    public class GoListener implements ActionListener {
    private JTextField viewer;
    private JTextField TIP;
    private JTextField freq;
    private JTextField max_num;
    private Vector numbers;
    public GoListener(JTextField j,JTextField k, JTextField m, JTextField f, Vector n) {
    freq = f;
    max_num = m;
    viewer = j;
    numbers = n;
    TIP = k;
    public void actionPerformed(ActionEvent e){
    int time = Integer.valueOf(max_num.getText());
    int f = Integer.valueOf(freq.getText());
    if (e.getActionCommand() == "GO") {
    for (int i = 0; i< time;++i) {
    int number=0;
    number = (int)Math.floor(100*Math.random());
    while(number>51){
    number = (int)Math.floor(100*Math.random());
    if(number<=9){
    viewer.setText(" "+"0" + String.valueOf(number) + " ");
    } else{
    viewer.setText(" " + String.valueOf(number) + " ");
    viewer.paintImmediately(viewer.getBounds());
    numbers.add(number);
    try {
    Thread.sleep(f*1000);
    } catch (Exception exp) {
    viewer.setText(" XX ");
    viewer.paintImmediately(viewer.getBounds());
    if (e.getActionCommand() == "VIEW") {
    try {
    //int numb = Integer.valueOf( TIP.getText() ).intValue();
    StringTokenizer tokenizer = new StringTokenizer(TIP.getText(), " ");
    String[] split = null;
    int tokenCount = tokenizer.countTokens();
    if (tokenCount > 0) {
    split = new String[tokenCount];
    for (int current = 0; current < tokenCount; current++) {
    split[current] = tokenizer.nextToken();
    viewer.setText(" " + String.valueOf(numbers) + " ");
    // k=numbers(1);
    /*while(c<i){
    String.valueOf(k).equals(split[1]);
    c++;
    TIP.setText(" " + split[2] + " ");
    } catch (Exception exp) {
    try {
    //string testit = numb.toString();
    //String str = "" + numb;
    //viewer.setText(str);
    //viewer.setText(numbers.toString());
    numbers.clear();
    } catch (Exception exp) {
    * Main.java
    * Created on 12. september 2007, 21:07
    * To change this template, choose Tools | Template Manager
    * and open the template in the editor.
    package grandmaster;
    import java.util.Vector;
    import javax.swing.*;
    import java.awt.event.*;
    import javax.swing.JButton;
    import java.awt.*;
    import grandmaster.GoListener;
    * @author Computer
    public class Main extends JFrame {
    private JTextField viewer;
    public JTextField TIP;
    // private TextInputPanel TIP;
    private Vector numbers;
    /** Creates a new instance of Main */
    public Main() {
    numbers = new Vector();
    JPanel p = new JPanel(new GridLayout(0,4));
    JButton go = new JButton();
    JButton view_num = new JButton();
    go.setText("Go!");
    go.setVisible(true);
    go.setActionCommand("GO");
    view_num.setText("VIEW");
    view_num.setVisible(true);
    view_num.setActionCommand("VIEW");
    JTextField max_num = new JTextField();
    max_num.setText("5");
    JTextField freq = new JTextField();
    freq.setText("1");
    viewer = new JTextField();
    viewer.setText("XX");
    TIP = new JTextField("");
    p.add(go);
    p.add(max_num);
    p.add(freq);
    p.add(view_num);
    getContentPane().add(p,BorderLayout.NORTH);
    getContentPane().add(viewer,BorderLayout.CENTER);
    getContentPane().add(TIP,BorderLayout.SOUTH);
    setSize(200,200);
    GoListener g = new GoListener(viewer,TIP,max_num, freq, numbers);
    go.addActionListener(g);
    view_num.addActionListener(g);
    * @param args the command line arguments
    public static void main(String[] args) {
    // TODO code application logic here
    Main window = new Main();
    window.setVisible(true);
    }

    NetBeans questions should be posted to the NB site. It has mailing lists and associated forums.
    This tutorial from the NB site addresses running programs outside of NB
    http://www.netbeans.org/kb/articles/javase-deploy.html
    When you compare objects, use ".equals()" and reserve == for comparing values.

Maybe you are looking for

  • Need help with (non-) charging

    my mini wont recognize the wall plug at all. it recognizes the usb/fire wire connection to my mac because it turns on when it plugs in, but will not charge. it only comes up with a flashing "no battery" icon. my mac will not recognize the ipod when p

  • Bug in firefox using cdata

    I seem to have a bug when attaching an xml file with cdata tags in it, works fine in IE but not in any other browser, all i get is undefined, yet there is a tutorial on the cs3 dvd showing that you can use xml with cdata in it. any ideas?

  • Connection between Wireless network (shared) and wired network through a router/modem

    I have a windows 8.1 X64 installed on my pc. i have connected a USB wireless network adapter to it so that i can connect to another wireless network. my internet connection comes from this device as well. I've got a Modem/router/AP (TD-W8970) and i s

  • Selecting playlists, apps, calendars

    I no longer see the page where I select apps, calendars, music, books after I connect my iPad... How do I find this items again?

  • Oracle Service Bus: Content Type is defaulted to "mutlipart/related"

    I have scenario where I need to invoke a REST Webservice from OSB which accepts only media types which has "multipart/atom+xml". OSB is used for protocol transformation converting the SOAP request into the HTTP POST request with multipart. I have Pro