Finding out the deleted instance from a recurrent set of events
Good Morning,
We have a requirement to find out all the events which belong to a uid in a recurrent event. When the event is created the RRULE returned is:
RRULE:FREQ=MONTHLY;BYMONTHDAY=16;COUNT=6;INTERVAL=1;WKST=SU
I then change the date of one of the instance in the event and the rrule and rdate are returned as follows
RRULE:FREQ=MONTHLY;BYMONTHDAY=16;COUNT=6;INTERVAL=1;WKST=SU
RDATE:20060717T060000Z
I then delete one of the instance and there is no change in the properties rrule or the rdate.
Is there a way to find out the deleted instances in the recurrent set while doing the fetch on the calendar.
Best Regards
Joyce
Good Morning,
We can use the EXDATE and EXRULE property to get the events in exception.
Thanks
Joyce
Similar Messages
-
How can I find out the mail server from email address?
Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOUYou can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean -
HOw to find out the RFC destination from BW system to ISU
Hi,
Currently my requirement is to call a function module which is written in ISU (remote enabled) from BW system.
I am unable to find out the rfc destination from BW to ISU system.
In CRM we have table like smofparsfa1. Is there any table in BW which can provide me the ISU destination?
I need to compare the records stored in isu as well as in BW system.
I need to call a function module which will provide me the data from isu.
please help me in this regard.
KrishnaHi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman. -
How find out the duplicate value from each columns.
I have below four columns,
How can i find out the duplicate value from each columns.
with All_files as (
select '1000' as INVOICE,'2000' AS DELIVERYNOTE,'3000' CANDELINVOICE,'4000' CANDELIVERYNOTE from dual union all
select '5000','6000','7000','8000' from dual union all
select '9000','1000','1100','1200' from dual union all
select '1200','3400','6700','8790' from dual union all
select '1000','2000','3000','9000' from dual union all
select '1230','2340','3450','4560' from dual
SELECT * FROM All_files
Output should be as per below.
1000 2000 3000 4000
9000 1000 1100 1200
1200 3400 6700 8790
1000 2000 3000 9000
Required to check uniqueness in cross columns.
Thanks.Try this (sorry about the formatting)...
WITH all_files AS (SELECT '1000' AS INVOICE,
'2000' AS DELIVERYNOTE,
'3000' CANDELINVOICE,
'4000' CANDELIVERYNOTE
FROM DUAL
UNION ALL
SELECT '5000',
'6000',
'7000',
'8000'
FROM DUAL
UNION ALL
SELECT '9000',
'1000',
'1100',
'1200'
FROM DUAL
UNION ALL
SELECT '1200',
'3400',
'6700',
'8790'
FROM DUAL
UNION ALL
SELECT '1000',
'2000',
'3000',
'9000'
FROM DUAL
UNION ALL
SELECT '1230',
'2340',
'3450',
'4560'
FROM DUAL),
t_base
AS (SELECT invoice
|| ','
|| deliverynote
|| ','
|| candelinvoice
|| ','
|| candeliverynote
str
FROM all_files),
t_str
AS (SELECT str || ',' AS str,
(LENGTH (str) - LENGTH (REPLACE (str, ','))) + 1
AS no_of_elements
FROM t_base),
t_n_rows
AS ( SELECT LEVEL AS i
FROM DUAL
CONNECT BY LEVEL <=
( SELECT SUM (no_of_elements) FROM t_str)),
t_build AS (SELECT t_str.str,
nt.i AS element_no,
INSTR (t_str.str,
DECODE (nt.i, 1, 0, 1),
DECODE (nt.i, 1, 1, nt.i - 1))
+ 1
AS start_pos,
INSTR (t_str.str,
1,
DECODE (nt.i, 1, 1, nt.i))
AS next_pos
FROM t_str
JOIN
t_n_rows nt
ON nt.i <= t_str.no_of_elements),
t_build2
AS (SELECT RTRIM (str, ',') AS original_string,
SUBSTR (str, start_pos, (next_pos - start_pos))
AS single_element,
element_no
FROM t_build),
t_build3
AS (SELECT single_element,
COUNT( * )
OVER (PARTITION BY single_element
ORDER BY single_element)
ele_count
FROM t_build2)
SELECT DISTINCT INVOICE,
DELIVERYNOTE,
CANDELINVOICE,
CANDELIVERYNOTE
FROM all_files, t_build3
WHERE ele_count > 1
AND ( INVOICE = single_element
OR DELIVERYNOTE = single_element
OR CANDELINVOICE = single_element
OR CANDELIVERYNOTE = single_element)I think this will be faster than the previous solution?
Cheers
Ben
Edited by: Munky on Feb 17, 2011 2:11 PM - "I think this will be faster than the previous solution?", nope - it's not :( -
Find out the peak position from graph
Hello All,,
Actually i want to run this algorithm real time,, to find out the peak position from graph ,, i need to generate the position automatically,,, firstly i try to use image processing by apply threshold followed by edge detection and the find out the center of each detected part. the drawpack of this procedure is that the obtained images are different and that lead to different threshold values,, so how can i directly find the position from the graph,,, here i attach the image and the graph of the image,,
thank you,,
Attachments:
11.png 15 KB
13.PNG 85 KBHello Klemen:
here i will explain in more details: the main objective of my work is to calculate velocity of small particle,, i perform my experiments by exposing the particle to 2 light pulses,, and i know the time between the two pulses,, so i need to know the distance to calculate the velocity,,, for that i apply correlation,,, the spot that appear in the correlation image is an indication of symmetry,,,so i should know the location of maximum intensity of each peak. The central peak (highest intensity) will be the reference (zero point) and the other peaks locations should be subtracted from the reference peak to determine the shift,,,
Here is the sequence of the process:
Acquiring raw image, correlation, position of central peak, shift calculation, velocity determination,,,,,
applying image processing is good idea in case of post processing condition,,, but in my case i need it real time, that mean if i need to apply image processing for calculation, i have to find out a universal criteria for threshold value that can be applied for all raw images,, from my experiments i didn't find specific criteria & i have to manually change the threshold value,,
If I choose the intensity (grey level) to be the criteria, then the small peaks (symmetry) will not take place,, because their intensity is very low compare to the central peak,,,
So the most reliable procedure is to directly find out the position of the two small peaks beside the central peak and save this values into an array and use it for calculation,,, I hope I am clearly explain my problem..
Thanks
Attachments:
7-2.png 36 KB
7-1.png 3 KB
7-700.PNG 123 KB -
How to find out the batches released from ASCP
hello gurus,
Please let me know how to find out the batches which is released from the ASCP in the OLTP OPM instance, like for the Discrete in the WIP Order in the others tabe we can see that there will be a message like " Job mass loadded on......". So is there any way that we can findout whether the batch is released from the ASCP or is it manually created.
Thanx & RegardsHi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman. -
How to find out the deleted Configuration
Hi,
Can any body tell me If I created a Plant with one transport request and it is yet to be moved to to quality.
Now If some body has deleted the Plant, how can I find out the person who has deleted the same.
Regards,
kumarHi,
Thanks for the reply.
I could be able to check all the options except the one with different users, but i am unable to get the required information.
Is there any way i can find out the specific user who did the deletion with any transaction from my log in.
Thanks in advance.
Regards,
kumar -
Find out the process id from a background running script
Hello all:
I created a java service and use a shell script to drive it from background. In the script, I have code like this:
javac myApp & I want to find out the pid for this process. After googling for a while I came up with this:
echo $$ > test.pid However, I notice two things:
1. This only works when my script runs frontground, meaning only when I remove "&";
2. The pid file, test.pid, won't be created until the running script exits, after I clicked ctrl+c, for instance.
Now the question is, how can I find out the pid of a background running script from within the script itself?
I don't want to use code such as ps -ef | grep .... because of the possible name conflict.
Thanks,
JohnnyYes, but as far as I understand this can happen to any background process, for instance, when the user logs out while a background process is still running.
But using the "$!" variable as you've shown is the "correct" solution.
This is probably what the OP is looking for:
javac myApp & echo $! > test.pidFrom the bash man page:
$ Expands to the process ID of the shell. In a () subshell, it expands to the process ID of the current shell, not the subshell.
! Expands to the process ID of the most recently executed background (asynchronous) command. -
Function module to find out the changed values from tables
What is the standard function module to find out the changed values (the old & new values) from tables in SAP ?
Hi Harish,
Please elaborate your requirement...
Please have a look on CDHDR AND CDPOS tables... it contains changed data... but all chages are not being tracked using it..
Try Below FMs as well..
For Header Level...
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
date_of_change = cdhdr-udate
objectclass = cdhdr-objectclas
objectid = cdhdr-objectid
time_of_change = cdhdr-utime
username = cdhdr-username
TABLES
i_cdhdr = icdhdr
EXCEPTIONS
no_position_found = 1
OTHERS = 2.
For Item Level
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = icdhdr-changenr
IMPORTING
header = cdhdr
TABLES
editpos = icdshw
EXCEPTIONS
no_position_found = 1
OTHERS = 2.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
How to find out the Menu UID from the main menu
You can easily Find the Menuuid for menuitem that open a form, but how can you find out the menu uid for f.e. Modules.
I want to add a submenu under modules.Hi Francis,
You have access to the complete list of menus UIDs into the UI Help File.
You only have to search for "Menu Items IDs" in the UI Help file.
Regards,
Trinidad. -
Code to find out the mobile number of a nokia set
Can any one tell me what is the code to find out the mobile number of a nokia handset.
@pabitra
There is no reliable way from/with the phone to find out your own number that works with all phones, all operators/networks, all SIM cards unfortunately.
Simplest way maybe to dial a landline with caller id. or another mobile.
Happy to have helped forum with a Support Ratio = 42.5 -
How to find out the deleted sales order
hi,
sap gurus,
my core user has deleted one sales order
its showing as sales order is ARCHIVED in the status when we go for VA02
in SAP in which table the deleted sales order will be stored.
so that i can
regards,
balaji.tPlz SEARCH in SCN before posting.
You can get those details from CDHDR, CDPOS tables.
Give OBJECTCLAS = VERKBELEG and CHNGIND = 'D' in CDPOS table.
You will the List of all Deleted Sales Orders. -
Finding out the field name from the columns shown on the screen
Hi,
I am new to CRMOD.
I see a lot of columns shown on the screen, say in the Account object.
Is there a way to find out which column in the Detail screen maps to which exact field in the Admin page ?
Appreciate all the help
RegardsIf you go to Admin > Application Customization > Account > Account Field Setup, you will see the list of all the fields. If you have custom fields, then click on the Rename button on the top left corner of the page, and then Advanced and it will show you the ITAGs of the fields.
Since you are new to CRMOD, play around with it and also read the help file and you would understand the app a lot better
Udaya -
Find out the Extractor names from the Table name
Hello, I wanted to know given a name of the table in ecc, if there is any way to check which extractors have used this table.
for example, I have a table name VBAP and I want to see the list of the extractors that are extracting data from this table.
I tried se11 in ecc, gave the table name and looked the where used list but it doesn't have any options for extractors. I checked all the options with no luck.By using table we won't find data source as you need.
By experience we can guess the data sources.
Actually in SAP we 3 category type of applications like
1. Human resources(HR)
2. Logistics(LO)
3. Financial(FI).
based on application also we have standard data sources as well. Based on table name, you can check the available standard data sources.
Please check thru in that way.
You can explore more about about BW - Extraction part.
Thanks -
How can I find out the database version from an old backupset
Hi,
I have to restore a database using an old backupset (4 years ago) to a new database. My challenge is we don't know what version of the database were used back then. Is there anyway I can find this information. We are using the RMAN catalog.
Or is RMAN restore and recovery can be used to a newer version than the backupset?
Thanks in advance.
Regards,
Sosan FongThanks for the reply and suggestion.
We are using its own software for all databases hosted in the server. So I need to cleanup and reinstall after tested in 11g. A little bit more work, but if it works, that's ok. Is there any other suggestions?
Regards,
S
Maybe you are looking for
-
Hi there, I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property fo
-
Hi, I've got old photos from iPhoto (2007 and older) saved on DVD and can't open it with the current version(11). Where is the problem? Thanks for help!
-
I am running Firefox 6. I need a plugin that can read PDFs
I used to have Adobe PDF Plugin for Firefox. I used to be able to open and read pdf files that I found on the web. I can still do so sometimes. The pdf files that I can not open are labeled "(in PDF * format)" from the Wells Fargo online site. The on
-
10.4 is definitely broken for Windows
I am having the same problems with 10.4 - iTunes Stores won't open - no error it just goes to a blank page and when the iPhone sync starts it gets stuck on backing up and never goes any further - just sits there forever. I have emailed support, and
-
How to create a central system on TDMS control system
Seems the central system on the TDMS control system is an alias. Which transaction to create it? Thanks!